net: tsec: convert to use DM_MDIO when DM_ETH enabled

For the platforms on which the eTSEC driver uses DM_ETH, convert its
MDIO controller code to also use DM_MDIO.

Note that for handling the TBI PHY (the MAC PCS for SGMII), we still
don't register a udevice for it, since we can drive it locally and there
is no point in doing otherwise.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
[Reworked to fix gazerbeam config]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
This commit is contained in:
Hou Zhiqiang 2020-07-16 18:09:12 +08:00 committed by Tom Rini
parent 16c53ce712
commit b4eb9cfc09

View File

@ -18,6 +18,7 @@
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <miiphy.h>
#include <asm/processor.h>
#include <asm/io.h>
@ -681,8 +682,12 @@ static int init_phy(struct tsec_private *priv)
if (priv->interface == PHY_INTERFACE_MODE_SGMII)
tsec_configure_serdes(priv);
#if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_MDIO)
phydev = dm_eth_phy_connect(priv->dev);
#else
phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev,
priv->interface);
#endif
if (!phydev)
return 0;
@ -793,10 +798,8 @@ int tsec_probe(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_platdata(dev);
struct tsec_private *priv = dev_get_priv(dev);
struct tsec_mii_mng __iomem *ext_phyregs_mii;
struct ofnode_phandle_args phandle_args;
u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE;
struct fsl_pq_mdio_info mdio_info;
const char *phy_mode;
fdt_addr_t reg;
ofnode parent;
@ -805,31 +808,6 @@ int tsec_probe(struct udevice *dev)
pdata->iobase = (phys_addr_t)dev_read_addr(dev);
priv->regs = dev_remap_addr(dev);
if (dev_read_phandle_with_args(dev, "phy-handle", NULL, 0, 0,
&phandle_args)) {
printf("phy-handle does not exist under tsec %s\n", dev->name);
return -ENOENT;
} else {
int reg = ofnode_read_u32_default(phandle_args.node, "reg", 0);
priv->phyaddr = reg;
}
parent = ofnode_get_parent(phandle_args.node);
if (!ofnode_valid(parent)) {
printf("No parent node for PHY?\n");
return -ENOENT;
}
reg = ofnode_get_addr_index(parent, 0);
if (reg == FDT_ADDR_T_NONE) {
printf("No 'reg' property of MII for external PHY\n");
return -ENOENT;
}
ext_phyregs_mii = map_physmem(reg + TSEC_MDIO_REGS_OFFSET, 0,
MAP_NOCACHE);
ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0,
&phandle_args);
if (ret == 0) {
@ -867,12 +845,6 @@ int tsec_probe(struct udevice *dev)
if (priv->interface == PHY_INTERFACE_MODE_SGMII)
priv->flags |= TSEC_SGMII;
mdio_info.regs = ext_phyregs_mii;
mdio_info.name = (char *)dev->name;
ret = fsl_pq_mdio_init(NULL, &mdio_info);
if (ret)
return ret;
/* Reset the MAC */
setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
udelay(2); /* Soft Reset must be asserted for 3 TX clocks */