mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
boards: meson: add g12a u200
The Amlogic U200 board is based on the Amlogic S905D2 SoC from the Amlogic G12A SoC family. The board has the following specifications : - Amlogic S905D2 ARM Cortex-A53 quad-core SoC - XGB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - eMMC - SDcard - Infrared receiver - SDIO WiFi Module - MIPI DSI Connector - Audio HAT Connector - PCI-E M.2 Connector Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
parent
f9e605437e
commit
b050a30016
5
board/amlogic/u200/MAINTAINERS
Normal file
5
board/amlogic/u200/MAINTAINERS
Normal file
|
@ -0,0 +1,5 @@
|
|||
U200
|
||||
M: Neil Armstrong <narmstrong@baylibre.com>
|
||||
S: Maintained
|
||||
F: board/amlogic/u200/
|
||||
F: configs/u200_defconfig
|
6
board/amlogic/u200/Makefile
Normal file
6
board/amlogic/u200/Makefile
Normal file
|
@ -0,0 +1,6 @@
|
|||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# (C) Copyright 2016 BayLibre, SAS
|
||||
# Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
|
||||
obj-y := u200.o
|
128
board/amlogic/u200/README
Normal file
128
board/amlogic/u200/README
Normal file
|
@ -0,0 +1,128 @@
|
|||
U-Boot for Amlogic U200
|
||||
=======================
|
||||
|
||||
U200 is a reference board manufactured by Amlogic with the following
|
||||
specifications:
|
||||
|
||||
- Amlogic S905D2 ARM Cortex-A53 quad-core SoC
|
||||
- 2GB DDR4 SDRAM
|
||||
- 10/100 Ethernet (Internal PHY)
|
||||
- 1 x USB 3.0 Host
|
||||
- eMMC
|
||||
- SDcard
|
||||
- Infrared receiver
|
||||
- SDIO WiFi Module
|
||||
- MIPI DSI Connector
|
||||
- Audio HAT Connector
|
||||
- PCI-E M.2 Connector
|
||||
|
||||
Schematics are available from Amlogic on demand.
|
||||
|
||||
Currently the u-boot port supports the following devices:
|
||||
- serial
|
||||
- Ethernet
|
||||
- Regulators
|
||||
- Clock controller
|
||||
|
||||
u-boot compilation
|
||||
==================
|
||||
|
||||
> export ARCH=arm
|
||||
> export CROSS_COMPILE=aarch64-none-elf-
|
||||
> make u200_defconfig
|
||||
> make
|
||||
|
||||
Image creation
|
||||
==============
|
||||
|
||||
Amlogic doesn't provide sources for the firmware and for tools needed
|
||||
to create the bootloader image, so it is necessary to obtain them from
|
||||
the git tree published by the board vendor:
|
||||
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
||||
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
||||
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
|
||||
> git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
|
||||
> cd amlogic-u-boot
|
||||
> make g12a_u200_v1_defconfig
|
||||
> make
|
||||
> export UBOOTDIR=$PWD
|
||||
|
||||
Download the latest Amlogic Buildroot package, and extract it :
|
||||
> wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
|
||||
> tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
|
||||
> export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
|
||||
> export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
|
||||
|
||||
Go back to mainline U-Boot source tree then :
|
||||
> mkdir fip
|
||||
|
||||
> wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
|
||||
> cp $UBOOTDIR/build/scp_task/bl301.bin fip/
|
||||
> cp $UBOOTDIR/build/board/amlogic/g12a_u200_v1/firmware/acs.bin fip/
|
||||
> cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12a/bl2.bin fip/
|
||||
> cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12a/bl30.bin fip/
|
||||
> cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12a/bl31.img fip/
|
||||
> cp $FIPDIR/g12a/ddr3_1d.fw fip/
|
||||
> cp $FIPDIR/g12a/ddr4_1d.fw fip/
|
||||
> cp $FIPDIR/g12a/ddr4_2d.fw fip/
|
||||
> cp $FIPDIR/g12a/diag_lpddr4.fw fip/
|
||||
> cp $FIPDIR/g12a/lpddr4_1d.fw fip/
|
||||
> cp $FIPDIR/g12a/lpddr4_2d.fw fip/
|
||||
> cp $FIPDIR/g12a/piei.fw fip/
|
||||
> cp u-boot.bin fip/bl33.bin
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl30.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl30_zero.bin \
|
||||
fip/bl301.bin \
|
||||
fip/bl301_zero.bin \
|
||||
fip/bl30_new.bin \
|
||||
bl30
|
||||
|
||||
> sh fip/blx_fix.sh \
|
||||
fip/bl2.bin \
|
||||
fip/zero_tmp \
|
||||
fip/bl2_zero.bin \
|
||||
fip/acs.bin \
|
||||
fip/bl21_zero.bin \
|
||||
fip/bl2_new.bin \
|
||||
bl2
|
||||
|
||||
> $FIPDIR/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \
|
||||
--output fip/bl30_new.bin.g12a.enc \
|
||||
--level v3
|
||||
> $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
||||
--output fip/bl30_new.bin.enc \
|
||||
--level v3 --type bl30
|
||||
> $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \
|
||||
--output fip/bl31.img.enc \
|
||||
--level v3 --type bl31
|
||||
> $FIPDIR/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \
|
||||
--output fip/bl33.bin.enc \
|
||||
--level v3 --type bl33
|
||||
> $FIPDIR/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \
|
||||
--output fip/bl2.n.bin.sig
|
||||
> $FIPDIR/g12a/aml_encrypt_g12a --bootmk \
|
||||
--output fip/u-boot.bin \
|
||||
--bl2 fip/bl2.n.bin.sig \
|
||||
--bl30 fip/bl30_new.bin.enc \
|
||||
--bl31 fip/bl31.img.enc \
|
||||
--bl33 fip/bl33.bin.enc \
|
||||
--ddrfw1 fip/ddr4_1d.fw \
|
||||
--ddrfw2 fip/ddr4_2d.fw \
|
||||
--ddrfw3 fip/ddr3_1d.fw \
|
||||
--ddrfw4 fip/piei.fw \
|
||||
--ddrfw5 fip/lpddr4_1d.fw \
|
||||
--ddrfw6 fip/lpddr4_2d.fw \
|
||||
--ddrfw7 fip/diag_lpddr4.fw \
|
||||
--level v3
|
||||
|
||||
and then write the image to SD with:
|
||||
|
||||
> DEV=/dev/your_sd_device
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
||||
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|
22
board/amlogic/u200/u200.c
Normal file
22
board/amlogic/u200/u200.c
Normal file
|
@ -0,0 +1,22 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2016 BayLibre, SAS
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <environment.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/axg.h>
|
||||
#include <asm/arch/sm.h>
|
||||
#include <asm/arch/eth.h>
|
||||
#include <asm/arch/mem.h>
|
||||
|
||||
int misc_init_r(void)
|
||||
{
|
||||
meson_eth_init(PHY_INTERFACE_MODE_RMII,
|
||||
MESON_USE_INTERNAL_RMII_PHY);
|
||||
|
||||
return 0;
|
||||
}
|
40
configs/u200_defconfig
Normal file
40
configs/u200_defconfig
Normal file
|
@ -0,0 +1,40 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_SYS_TEXT_BASE=0x01000000
|
||||
CONFIG_MESON_G12A=y
|
||||
CONFIG_DEBUG_UART_BASE=0xff803000
|
||||
CONFIG_DEBUG_UART_CLOCK=24000000
|
||||
CONFIG_IDENT_STRING=" u200"
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_NR_DRAM_BANKS=1
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_MISC_INIT_R=y
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_DISPLAY_BOARDINFO=y
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="meson-g12a-u200"
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_MMC_MESON_GX=y
|
||||
CONFIG_PHY_ADDR_ENABLE=y
|
||||
CONFIG_PHY_ADDR=8
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_ETH_DESIGNWARE=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_MESON_G12A=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_RESET=y
|
||||
CONFIG_DEBUG_UART_MESON=y
|
||||
CONFIG_DEBUG_UART_ANNOUNCE=y
|
||||
CONFIG_DEBUG_UART_SKIP_INIT=y
|
||||
CONFIG_MESON_SERIAL=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
Loading…
Reference in New Issue
Block a user