pci: fix errant data types and corresponding access functions

In a couple of places, unsigned int and pci_config_*_dword were being
used when u16 and _word should be used.  Unsigned int was also being
used in a couple of places that should be pci_addr_t.

Signed-off-by: Andrew Sharp <andywyse6@gmail.com>
This commit is contained in:
Andrew Sharp 2012-08-01 12:27:16 +00:00 committed by Wolfgang Denk
parent 6e2fbdea1b
commit af778c6d9e
2 changed files with 12 additions and 10 deletions

View File

@ -118,11 +118,11 @@ PCI_WRITE_VIA_DWORD_OP(word, u16, 0x02, 0x0000ffff)
void *pci_map_bar(pci_dev_t pdev, int bar, int flags)
{
pci_addr_t pci_bus_addr;
u32 bar_response;
pci_addr_t bar_response;
/* read BAR address */
pci_read_config_dword(pdev, bar, &bar_response);
pci_bus_addr = (pci_addr_t)(bar_response & ~0xf);
pci_bus_addr = bar_response & ~0xf;
/*
* Pass "0" as the length argument to pci_bus_to_virt. The arg
@ -385,7 +385,8 @@ int pci_hose_config_device(struct pci_controller *hose,
pci_addr_t mem,
unsigned long command)
{
unsigned int bar_response, old_command;
pci_addr_t bar_response;
unsigned int old_command;
pci_addr_t bar_value;
pci_size_t bar_size;
unsigned char pin;

View File

@ -88,15 +88,15 @@ void pciauto_setup_device(struct pci_controller *hose,
struct pci_region *prefetch,
struct pci_region *io)
{
unsigned int bar_response;
pci_addr_t bar_response;
pci_addr_t bar_value;
pci_size_t bar_size;
unsigned int cmdstat = 0;
u16 cmdstat = 0;
struct pci_region *bar_res;
int bar, bar_nr = 0;
int found_mem64 = 0;
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
cmdstat = (cmdstat & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) | PCI_COMMAND_MASTER;
for (bar = PCI_BASE_ADDRESS_0; bar < PCI_BASE_ADDRESS_0 + (bars_num*4); bar += 4) {
@ -167,7 +167,7 @@ void pciauto_setup_device(struct pci_controller *hose,
bar_nr++;
}
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_word(hose, dev, PCI_COMMAND, cmdstat);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE,
CONFIG_SYS_PCI_CACHE_LINE_SIZE);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
@ -179,9 +179,9 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
struct pci_region *pci_mem = hose->pci_mem;
struct pci_region *pci_prefetch = hose->pci_prefetch;
struct pci_region *pci_io = hose->pci_io;
unsigned int cmdstat;
u16 cmdstat;
pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
pci_hose_read_config_word(hose, dev, PCI_COMMAND, &cmdstat);
/* Configure bus number registers */
pci_hose_write_config_byte(hose, dev, PCI_PRIMARY_BUS,
@ -229,7 +229,8 @@ void pciauto_prescan_setup_bridge(struct pci_controller *hose,
}
/* Enable memory and I/O accesses, enable bus master */
pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat | PCI_COMMAND_MASTER);
pci_hose_write_config_word(hose, dev, PCI_COMMAND,
cmdstat | PCI_COMMAND_MASTER);
}
void pciauto_postscan_setup_bridge(struct pci_controller *hose,