sunxi: retrieve FEL-provided values to environment variables

This patch extends the misc_init_r() function on sunxi boards
to test for the presence of a suitable "sunxi" SPL header. If
found, and the loader ("fel" utility) provided a non-zero value
for the boot.scr address, then the corresponding environment
variable fel_scriptaddr gets set.

misc_init_r() also sets (or clears) the "fel_booted" variable depending
on the active boot device, using the same logic as spl_boot_device().

The goal is to provide sufficient information (within the U-Boot
environment) to make intelligent decisions on how to continue the boot
process, allowing specific customizations for the "FEL boot" case.

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit is contained in:
Bernhard Nortmann 2015-09-17 18:52:52 +02:00 committed by Hans de Goede
parent a188438175
commit af654d1461
3 changed files with 42 additions and 1 deletions

View File

@ -21,6 +21,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/spl.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/timer.h>
#include <asm/arch/tzpc.h>
@ -152,7 +153,7 @@ u32 spl_boot_device(void)
* binary over USB. If it is found, it determines where SPL was
* read from.
*/
if (readl(4) != 0x4E4F4765 || readl(8) != 0x3054422E) /* eGON.BT0 */
if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */
return BOOT_DEVICE_BOARD;
/* The BROM will try to boot from mmc0 first, so try that first. */

View File

@ -12,6 +12,9 @@
#define SPL_SIGNATURE "SPL" /* marks "sunxi" SPL header */
#define SPL_HEADER_VERSION 1
/* Note: A80 will require special handling here: SPL_ADDR 0x10000 */
#define SPL_ADDR 0x0
/* boot head definition from sun4i boot code */
struct boot_file_head {
uint32_t b_instruction; /* one intruction jumping to real code */
@ -42,4 +45,6 @@ struct boot_file_head {
uint32_t reserved; /* padding, align to 32 bytes */
};
#define is_boot0_magic(addr) (memcmp((void *)addr, BOOT0_MAGIC, 8) == 0)
#endif

View File

@ -516,6 +516,31 @@ void get_board_serial(struct tag_serialnr *serialnr)
}
#endif
#if !defined(CONFIG_SPL_BUILD)
#include <asm/arch/spl.h>
/*
* Check the SPL header for the "sunxi" variant. If found: parse values
* that might have been passed by the loader ("fel" utility), and update
* the environment accordingly.
*/
static void parse_spl_header(const uint32_t spl_addr)
{
struct boot_file_head *spl = (void *)spl_addr;
if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) {
uint8_t spl_header_version = spl->spl_signature[3];
if (spl_header_version == SPL_HEADER_VERSION) {
if (spl->fel_script_address)
setenv_hex("fel_scriptaddr",
spl->fel_script_address);
return;
}
printf("sunxi SPL version mismatch: expected %u, got %u\n",
SPL_HEADER_VERSION, spl_header_version);
}
}
#endif
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
@ -524,6 +549,16 @@ int misc_init_r(void)
uint8_t mac_addr[6];
int ret;
#if !defined(CONFIG_SPL_BUILD)
setenv("fel_booted", NULL);
setenv("fel_scriptaddr", NULL);
/* determine if we are running in FEL mode */
if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */
setenv("fel_booted", "1");
parse_spl_header(SPL_ADDR);
}
#endif
ret = sunxi_get_sid(sid);
if (ret == 0 && sid[0] != 0 && sid[3] != 0) {
if (!getenv("ethaddr")) {