update/fix AcTux2 board

Signed-off-by: Michael Schwingen <michael@schwingen.org>
This commit is contained in:
Michael Schwingen 2011-05-23 00:00:05 +02:00 committed by Albert ARIBAUD
parent 517c5dfed5
commit af0504858c
4 changed files with 100 additions and 78 deletions

View File

@ -43,50 +43,55 @@
DECLARE_GLOBAL_DATA_PTR;
int board_init (void)
int board_early_init_f(void)
{
/* CS1: IPAC-X */
writel(0x94d10013, IXP425_EXP_CS1);
/* CS5: Debug port */
writel(0x9d520003, IXP425_EXP_CS5);
/* CS6: HW release register */
writel(0x81860001, IXP425_EXP_CS6);
/* CS7: LEDs */
writel(0x80900003, IXP425_EXP_CS7);
return 0;
}
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_ACTUX2;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_ETHRST);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DSR);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_DCD);
GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_ETHRST);
GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_DSR);
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_DCD);
/* Setup GPIO's for Interrupt inputs */
GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
/* Setup GPIOs for Interrupt inputs */
GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_DBGINT);
GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_ETHINT);
/* Setup GPIO's for 33MHz clock output */
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
*IXP425_GPIO_GPCLKR = 0x011001FF;
/* Setup GPIOs for 33MHz clock output */
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
writel(0x011001FF, IXP425_GPIO_GPCLKR);
/* CS1: IPAC-X */
*IXP425_EXP_CS1 = 0x94d10013;
/* CS5: Debug port */
*IXP425_EXP_CS5 = 0x9d520003;
/* CS6: HW release register */
*IXP425_EXP_CS6 = 0x81860001;
/* CS7: LEDs */
*IXP425_EXP_CS7 = 0x80900003;
udelay(533);
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_ETHRST);
udelay (533);
GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
ACTUX2_LED1 (1);
ACTUX2_LED2 (0);
ACTUX2_LED3 (0);
ACTUX2_LED4 (0);
ACTUX2_LED1(1);
ACTUX2_LED2(0);
ACTUX2_LED3(0);
ACTUX2_LED4(0);
return 0;
}
@ -94,29 +99,27 @@ int board_init (void)
/*
* Check Board Identity
*/
int checkboard (void)
int checkboard(void)
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
puts ("Board: AcTux-2 rev.");
putc (ACTUX2_BOARDREL + 'A' - 1);
puts("Board: AcTux-2 rev.");
putc(ACTUX2_BOARDREL + 'A' - 1);
if (i > 0) {
puts(", serial# ");
puts(buf);
}
putc ('\n');
putc('\n');
return (0);
return 0;
}
int dram_init (void)
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return (0);
gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
return 0;
}
/*************************************************************************
@ -125,13 +128,13 @@ int dram_init (void)
* 1 = Rev. A
* 2 = Rev. B
*************************************************************************/
u32 get_board_rev (void)
u32 get_board_rev(void)
{
return ACTUX2_BOARDREL;
}
void reset_phy (void)
void reset_phy(void)
{
/* init IcPlus IP175C ethernet switch to native IP175C mode */
miiphy_write ("NPE0", 29, 31, 0x175C);
miiphy_write("NPE0", 29, 31, 0x175C);
}

View File

@ -1,4 +0,0 @@
CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.o

View File

@ -30,34 +30,29 @@ SECTIONS
. = ALIGN (4);
.text : {
arch/arm/cpu/ixp/start.o(.text)
lib/string.o(.text)
lib/vsprintf.o(.text)
arch/arm/lib/board.o(.text)
common/dlmalloc.o(.text)
arch/arm/cpu/ixp/cpu.o(.text)
arch/arm/cpu/ixp/start.o(.text*)
net/libnet.o(.text*)
board/actux2/libactux2.o(.text*)
arch/arm/cpu/ixp/libixp.o(.text*)
drivers/serial/libserial.o(.text*)
. = env_offset;
common/env_embedded.o (.ppcenv)
* (.text)
common/env_embedded.o(.ppcenv)
*(.text*)
}
. = ALIGN (4);
.rodata : {
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
. = ALIGN (4);
.data : {
*(.data)
*(.data*)
}
. = ALIGN (4);
.got : {
*(.got)
}
. =.;
__u_boot_cmd_start =.;
.u_boot_cmd : {
@ -66,10 +61,27 @@ SECTIONS
__u_boot_cmd_end =.;
. = ALIGN (4);
__bss_start =.;
.bss (NOLOAD): {
*(.bss)
. = ALIGN(4);
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
__rel_dyn_end = .;
}
.dynsym : {
__dynsym_start = .;
*(.dynsym)
}
.bss __rel_dyn_start (OVERLAY) : {
__bss_start = .;
*(.bss*)
. = ALIGN(4);
_end = .;
}
__bss_end__ =.;
/DISCARD/ : { *(.dynstr*) }
/DISCARD/ : { *(.dynamic*) }
/DISCARD/ : { *(.plt*) }
/DISCARD/ : { *(.interp*) }
/DISCARD/ : { *(.gnu*) }
}

View File

@ -37,12 +37,12 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTDELAY 5
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOARD_EARLY_INIT_F 1
#define CONFIG_SYS_LDSCRIPT "board/actux2/u-boot.lds"
/***************************************************************
* U-boot generic defines start here.
***************************************************************/
#undef CONFIG_USE_IRQ
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
@ -84,8 +84,9 @@
#define CONFIG_SYS_MEMTEST_START 0x00400000
#define CONFIG_SYS_MEMTEST_END 0x00800000
/* spec says 66.666 MHz, but it appears to be 33 */
#define CONFIG_SYS_HZ 3333333
/* timer clock - 2* OSC_IN system clock */
#define CONFIG_IXP425_TIMER_CLK 66666666
#define CONFIG_SYS_HZ 1000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x00010000
@ -100,10 +101,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
# define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
# define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
#endif
/* Expansion bus settings */
#define CONFIG_SYS_EXP_CS0 0xbd113042
@ -111,7 +108,7 @@
/* SDRAM settings */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x00000000
#define CONFIG_SYS_DRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* 16MB SDRAM */
#define CONFIG_SYS_SDR_CONFIG 0x3A
@ -121,6 +118,7 @@
#define CONFIG_SYS_DRAM_SIZE 0x01000000
/* FLASH organization */
#define CONFIG_SYS_TEXT_BASE 0x50000000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 140
@ -130,6 +128,7 @@
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_BOARD_SIZE_LIMIT 262144
/* Use common CFI driver */
#define CONFIG_SYS_FLASH_CFI
@ -149,6 +148,11 @@
#define CONFIG_PHY_ADDR 0x00
/* MII PHY management */
#define CONFIG_MII 1
/* fixed-speed switch without standard PHY registers on MII */
#define CONFIG_MII_NPE0_FIXEDLINK 1
#define CONFIG_MII_NPE0_SPEED 100
#define CONFIG_MII_NPE0_FULLDUPLEX 1
/* Number of ethernet rx buffers & descriptors */
#define CONFIG_SYS_RX_ETH_BUFFER 16
#define CONFIG_RESET_PHY_R 1
@ -183,13 +187,15 @@
"npe_ucode=50040000\0" \
"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
"kerneladdr=50050000\0" \
"kernelfile=actux2/uImage\0" \
"rootfile=actux2/rootfs\0" \
"rootaddr=50170000\0" \
"loadaddr=10000\0" \
"updateboot_ser=mw.b 10000 ff 40000;" \
" loady ${loadaddr};" \
" run eraseboot writeboot\0" \
"updateboot_net=mw.b 10000 ff 40000;" \
" tftp ${loadaddr} u-boot.bin;" \
" tftp ${loadaddr} actux2/u-boot.bin;" \
" run eraseboot writeboot\0" \
"eraseboot=protect off 50000000 50003fff;" \
" protect off 50006000 5003ffff;" \
@ -197,8 +203,9 @@
" erase 50006000 5003ffff\0" \
"writeboot=cp.b 10000 50000000 4000;" \
" cp.b 16000 50006000 3a000\0" \
"eraseenv=protect off 50004000 50005fff;" \
" erase 50004000 50005fff\0" \
"updateucode=loady;" \
" era ${npe_ucode} +${filesize};" \
" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
"updateroot=tftp ${loadaddr} ${rootfile};" \
" era ${rootaddr} +${filesize};" \
" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
@ -217,4 +224,8 @@
" tftpboot ${loadaddr} ${kernelfile};" \
" bootm\0"
/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */