mips: gpio: mscc: Obsoleted gpio-mscc-bitbang-spi.c

With the new mscc_bb_spi.c driver, there is no longer use for the
gpio-mscc-bitbang-spi.c driver.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
This commit is contained in:
Lars Povlsen 2019-01-08 10:38:35 +01:00 committed by Daniel Schwierzeck
parent 6492c9168a
commit ace9c103df
3 changed files with 0 additions and 130 deletions

View File

@ -99,13 +99,6 @@ config LPC32XX_GPIO
help
Support for the LPC32XX GPIO driver.
config MSCC_BITBANG_SPI_GPIO
bool "Microsemi bitbang spi GPIO driver"
depends on DM_GPIO && SOC_VCOREIII
help
Support controlling the GPIO used for SPI bitbang by software. Can
be used by the VCoreIII SoCs, but it was mainly useful for Luton.
config MSCC_SGPIO
bool "Microsemi Serial GPIO driver"
depends on DM_GPIO && SOC_VCOREIII

View File

@ -59,5 +59,4 @@ obj-$(CONFIG_MSM_GPIO) += msm_gpio.o
obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o
obj-$(CONFIG_PM8916_GPIO) += pm8916_gpio.o
obj-$(CONFIG_MT7621_GPIO) += mt7621_gpio.o
obj-$(CONFIG_MSCC_BITBANG_SPI_GPIO) += gpio-mscc-bitbang-spi.o
obj-$(CONFIG_MSCC_SGPIO) += mscc_sgpio.o

View File

@ -1,122 +0,0 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Microsemi SoCs pinctrl driver
*
* Author: <gregory.clement@bootlin.com>
* License: Dual MIT/GPL
* Copyright (c) 2018 Microsemi Corporation
*/
#include <common.h>
#include <asm-generic/gpio.h>
#include <asm/io.h>
#include <dm.h>
#include <errno.h>
enum {
SDI,
CS0,
CS1,
CS2,
CS3,
SDO,
SCK
};
static const int pinmap[] = { 0, 5, 6, 7, 8, 10, 12 };
#define SW_SPI_CSn_OE 0x1E /* bits 1 to 4 */
#define SW_SPI_CS0_OE BIT(1)
#define SW_SPI_SDO_OE BIT(9)
#define SW_SPI_SCK_OE BIT(11)
#define SW_PIN_CTRL_MODE BIT(13)
struct mscc_bb_spi_gpio {
void __iomem *regs;
u32 cache_val;
};
static int mscc_bb_spi_gpio_set(struct udevice *dev, unsigned oft, int val)
{
struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
if (val)
gpio->cache_val |= BIT(pinmap[oft]);
else
gpio->cache_val &= ~BIT(pinmap[oft]);
writel(gpio->cache_val, gpio->regs);
return 0;
}
static int mscc_bb_spi_gpio_direction_output(struct udevice *dev, unsigned oft,
int val)
{
if (oft == 0) {
pr_err("SW_SPI_DSI can't be used as output\n");
return -ENOTSUPP;
}
mscc_bb_spi_gpio_set(dev, oft, val);
return 0;
}
static int mscc_bb_spi_gpio_direction_input(struct udevice *dev, unsigned oft)
{
return 0;
}
static int mscc_bb_spi_gpio_get(struct udevice *dev, unsigned int oft)
{
struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
u32 val = readl(gpio->regs);
return !!(val & BIT(pinmap[oft]));
}
static const struct dm_gpio_ops mscc_bb_spi_gpio_ops = {
.direction_output = mscc_bb_spi_gpio_direction_output,
.direction_input = mscc_bb_spi_gpio_direction_input,
.set_value = mscc_bb_spi_gpio_set,
.get_value = mscc_bb_spi_gpio_get,
};
static int mscc_bb_spi_gpio_probe(struct udevice *dev)
{
struct mscc_bb_spi_gpio *gpio = dev_get_priv(dev);
struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
gpio->regs = dev_remap_addr(dev);
if (!gpio->regs)
return -EINVAL;
uc_priv->bank_name = dev->name;
uc_priv->gpio_count = ARRAY_SIZE(pinmap);
/*
* Enable software mode to control the SPI pin, enables the
* output mode for most of the pin and initialize the cache
* value in the same time
*/
gpio->cache_val = SW_PIN_CTRL_MODE | SW_SPI_SCK_OE | SW_SPI_SDO_OE |
SW_SPI_CS0_OE;
writel(gpio->cache_val, gpio->regs);
return 0;
}
static const struct udevice_id mscc_bb_spi_gpio_ids[] = {
{.compatible = "mscc,spi-bitbang-gpio"},
{}
};
U_BOOT_DRIVER(gpio_mscc_bb_spi) = {
.name = "gpio-mscc-spi-bitbang",
.id = UCLASS_GPIO,
.ops = &mscc_bb_spi_gpio_ops,
.probe = mscc_bb_spi_gpio_probe,
.of_match = of_match_ptr(mscc_bb_spi_gpio_ids),
.priv_auto_alloc_size = sizeof(struct mscc_bb_spi_gpio),
};