brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

board/T1040qds: Add VSC9953 support for T1040qds board

Browse Source 
This patch configures and initializes the L2 switch on T1040QDS board.
The L2 switch ports must be initialized according to the SerDes
protocols.

Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
This commit is contained in:
Codrin Ciubotariu 2015-01-21 11:54:11 +02:00 committed by York Sun
parent 9b478bef27
commit a83fccc2c9
2 changed files with 97 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

91
board/freescale/t1040qds/eth.c
View File

@ -18,6 +18,7 @@
#include <fsl_mdio.h>
#include <malloc.h>
#include <asm/fsl_dtsec.h>
#include <vsc9953.h>
#include "../common/fman.h"
#include "../common/qixis.h"
@ -439,6 +440,12 @@ int board_eth_init(bd_t *bis)
#ifdef CONFIG_FMAN_ENET
struct memac_mdio_info memac_mdio_info;
unsigned int i;
#ifdef CONFIG_VSC9953
int lane;
int phy_addr;
phy_interface_t phy_int;
struct mii_dev *bus;
#endif
printf("Initializing Fman\n");
set_brdcfg9_for_gtx_clk();
@ -493,6 +500,90 @@ int board_eth_init(bd_t *bis)
}
}
#ifdef CONFIG_VSC9953
for (i = 0; i < VSC9953_MAX_PORTS; i++) {
lane = -1;
phy_addr = 0;
phy_int = PHY_INTERFACE_MODE_NONE;
switch (i) {
case 0:
case 1:
case 2:
case 3:
lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A);
/* PHYs connected over QSGMII */
if (lane >= 0) {
phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR +
i;
phy_int = PHY_INTERFACE_MODE_QSGMII;
break;
}
lane = serdes_get_first_lane(FSL_SRDS_1,
SGMII_SW1_MAC1 + i);
if (lane < 0)
break;
/* PHYs connected over QSGMII */
if (i != 3 || lane_to_slot[lane] == 7)
phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+ i;
else
phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR;
phy_int = PHY_INTERFACE_MODE_SGMII;
break;
case 4:
case 5:
case 6:
case 7:
lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B);
/* PHYs connected over QSGMII */
if (lane >= 0) {
phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR +
i - 4;
phy_int = PHY_INTERFACE_MODE_QSGMII;
break;
}
lane = serdes_get_first_lane(FSL_SRDS_1,
SGMII_SW1_MAC1 + i);
/* PHYs connected over SGMII */
if (lane >= 0) {
phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR
+ i - 3;
phy_int = PHY_INTERFACE_MODE_SGMII;
}
break;
case 8:
if (serdes_get_first_lane(FSL_SRDS_1,
SGMII_FM1_DTSEC1) < 0)
/* FM1@DTSEC1 is connected to SW1@PORT8 */
vsc9953_port_enable(i);
break;
case 9:
if (serdes_get_first_lane(FSL_SRDS_1,
SGMII_FM1_DTSEC2) < 0) {
/* Enable L2 On MAC2 using SCFG */
struct ccsr_scfg *scfg = (struct ccsr_scfg *)
CONFIG_SYS_MPC85xx_SCFG;
out_be32(&scfg->esgmiiselcr,
in_be32(&scfg->esgmiiselcr) |
(0x80000000));
vsc9953_port_enable(i);
}
break;
}
if (lane >= 0) {
bus = mii_dev_for_muxval(lane_to_slot[lane]);
vsc9953_port_info_set_mdio(i, bus);
vsc9953_port_enable(i);
}
vsc9953_port_info_set_phy_address(i, phy_addr);
vsc9953_port_info_set_phy_int(i, phy_int);
}
#endif
cpu_eth_init(bis);
#endif

6
include/configs/T1040QDS.h
View File

@ -692,6 +692,12 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
#endif
/* Enable VSC9953 L2 Switch driver */
#define CONFIG_VSC9953
#define CONFIG_VSC9953_CMD
#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x14
#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x18
/*
* Dynamic MTD Partition support with mtdparts
*/