arm: mx6: cm_fx6: add nand support

Add NAND support for Compulab CM-FX6 CoM.

Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
This commit is contained in:
Nikita Kiryanov 2014-08-20 15:09:01 +03:00 committed by Stefano Babic
parent e32028a70b
commit a6b0652bb5
3 changed files with 78 additions and 1 deletions

View File

@ -10,11 +10,46 @@
#include <common.h>
#include <fsl_esdhc.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include "common.h"
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_NAND_MXS
static iomux_v3_cfg_t const nand_pads[] = {
IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void cm_fx6_setup_gpmi_nand(void)
{
SETUP_IOMUX_PADS(nand_pads);
/* Enable clock roots */
enable_usdhc_clk(1, 3);
enable_usdhc_clk(1, 4);
setup_gpmi_io_clk(MXC_CCM_CS2CDR_ENFC_CLK_PODF(0xf) |
MXC_CCM_CS2CDR_ENFC_CLK_PRED(1) |
MXC_CCM_CS2CDR_ENFC_CLK_SEL(0));
}
#else
static void cm_fx6_setup_gpmi_nand(void) {}
#endif
#ifdef CONFIG_FSL_ESDHC
static struct fsl_esdhc_cfg usdhc_cfg[3] = {
{USDHC1_BASE_ADDR},
@ -47,6 +82,8 @@ int board_mmc_init(bd_t *bis)
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
cm_fx6_setup_gpmi_nand();
return 0;
}

View File

@ -15,6 +15,7 @@
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/imx-common/iomux-v3.h>
#include <fsl_esdhc.h>
#include "common.h"
@ -309,7 +310,17 @@ static void cm_fx6_setup_ecspi(void) { }
void board_init_f(ulong dummy)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
gd = &gdata;
/*
* We don't use DMA in SPL, but we do need it in U-Boot. U-Boot
* initializes DMA very early (before all board code), so the only
* opportunity we have to initialize APBHDMA clocks is in SPL.
*/
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
enable_usdhc_clk(1, 2);
arch_cpu_init();
timer_init();
cm_fx6_setup_ecspi();

View File

@ -130,6 +130,20 @@
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"run doboot\0" \
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=ubifs\0" \
"nandargs=setenv bootargs console=${console} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype} " \
"${video}\0" \
"nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
"nandboot=echo Booting from nand ...; " \
"run nandargs; " \
"nand read ${loadaddr} 0 780000; " \
"if ${loadfdt}; then " \
"run nandloadfdt;" \
"fi; " \
"run doboot\0" \
"boot=mmc dev ${mmcdev}; " \
"if mmc rescan; then " \
"if run loadmmcbootscript; then " \
@ -142,7 +156,8 @@
"run mmcboot;" \
"fi;" \
"fi;" \
"fi;\0"
"fi;" \
"run nandboot\0"
#define CONFIG_BOOTCOMMAND \
"run setboottypem; run boot"
@ -160,6 +175,20 @@
#define CONFIG_SPI_FLASH_SST
#define CONFIG_SPI_FLASH_WINBOND
/* NAND */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_NAND_MXS
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* APBH DMA is required for NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
#endif
/* GPIO */
#define CONFIG_MXC_GPIO