arm: dts: imx8mn, imx8mn-beacon: Sync dts files with Kernel 5.12-rc5

There have been a few updates including flexspi, so it's necessary
to re-sync.

Signed-off-by: Adam Ford <aford173@gmail.com>

arch/arm/dts/imx8mn-beacon-baseboard.dtsi

@@ -34,6 +34,15 @@
 		};
 	};
 
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		regulator-name = "vsd_3v3";
@@ -53,6 +62,20 @@
 		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		audio-cpu = <&sai3>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+	};
 };
 
 &ecspi2 {
@@ -98,6 +121,44 @@
 		interrupt-parent = <&gpio4>;
 		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
+		clock-names = "xclk";
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+};
+
+&easrc {
+	fsl,asrc-rate  = <48000>;
+	status = "okay";
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
 };
 
 &snvs_pwrkey {
@@ -177,6 +238,16 @@
 		>;
 	};
 
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
+			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
+			MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
+			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
+			MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0	0xd6
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140

arch/arm/dts/imx8mn-beacon-som.dtsi

@@ -4,6 +4,12 @@
  */
 
 / {
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+		spi0 = &flexspi;
+	};
+
 	usdhc1_pwrseq: usdhc1_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		pinctrl-names = "default";
@@ -36,11 +42,39 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+/* DDR controller is running LPDDR at 800MHz which requires 0.95V */
+&a53_opp_table {
+	opp-1200000000 {
+		opp-microvolt = <950000>;
+	};
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-800M {
+			opp-hz = /bits/ 64 <800000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
 	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
+	phy-supply = <&buck6_reg>;
 	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 	fsl,magic-packet;
 	status = "okay";
@@ -56,6 +90,22 @@
 	};
 };
 
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi>;
+	status = "okay";
+
+	flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -184,7 +234,7 @@
 		reg = <0x50>;
 	};
 
-	rtc@51 {
+	rtc: rtc@51 {
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
 	};
@@ -285,6 +335,17 @@
 		>;
 	};
 
+	pinctrl_flexspi: flexspigrp {
+		fsl,pins = <
+			MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK               0x1c2
+			MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B            0x82
+			MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0           0x82
+			MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1           0x82
+			MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2           0x82
+			MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3           0x82
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141

arch/arm/dts/imx8mn.dtsi

@@ -241,10 +241,12 @@
 	};
 
 	soc@0 {
-		compatible = "simple-bus";
+		compatible = "fsl,imx8mn-soc", "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x3e000000>;
+		nvmem-cells = <&imx8mn_uid>;
+		nvmem-cell-names = "soc_unique_id";
 
 		aips1: bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
@@ -253,7 +255,7 @@
 			#size-cells = <1>;
 			ranges;
 
-			spba: bus@30000000 {
+			spba: spba-bus@30000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -531,9 +533,17 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 
+				imx8mn_uid: unique-id@410 {
+					reg = <0x4 0x8>;
+				};
+
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				fec_mac_address: mac-address@90 {
+					reg = <0x90 6>;
+				};
 			};
 
 			anatop: anatop@30360000 {
@@ -581,7 +591,9 @@
 						<&clk IMX8MN_CLK_NOC>,
 						<&clk IMX8MN_CLK_AUDIO_AHB>,
 						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
-						<&clk IMX8MN_SYS_PLL3>;
+						<&clk IMX8MN_SYS_PLL3>,
+						<&clk IMX8MN_AUDIO_PLL1>,
+						<&clk IMX8MN_AUDIO_PLL2>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_800M>,
 							 <&clk IMX8MN_ARM_PLL_OUT>,
 							 <&clk IMX8MN_SYS_PLL3_OUT>,
@@ -589,7 +601,9 @@
 				assigned-clock-rates = <0>, <0>, <0>,
 							<400000000>,
 							<400000000>,
-							<600000000>;
+							<600000000>,
+							<393216000>,
+							<361267200>;
 			};
 
 			src: reset-controller@30390000 {
@@ -875,6 +889,19 @@
 				status = "disabled";
 			};
 
+			flexspi: spi@30bb0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_QSPI_ROOT>,
+					 <&clk IMX8MN_CLK_QSPI_ROOT>;
+				clock-names = "fspi", "fspi_en";
+				status = "disabled";
+			};
+
 			sdma1: dma-controller@30bd0000 {
 				compatible = "fsl,imx8mn-sdma", "fsl,imx8mq-sdma";
 				reg = <0x30bd0000 0x10000>;
@@ -903,13 +930,18 @@
 				assigned-clocks = <&clk IMX8MN_CLK_ENET_AXI>,
 						  <&clk IMX8MN_CLK_ENET_TIMER>,
 						  <&clk IMX8MN_CLK_ENET_REF>,
-						  <&clk IMX8MN_CLK_ENET_TIMER>;
+						  <&clk IMX8MN_CLK_ENET_PHY_REF>;
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_266M>,
 							 <&clk IMX8MN_SYS_PLL2_100M>,
-							 <&clk IMX8MN_SYS_PLL2_125M>;
+							 <&clk IMX8MN_SYS_PLL2_125M>,
-				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+							 <&clk IMX8MN_SYS_PLL2_50M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>, <0>;
 				fsl,num-tx-queues = <3>;
 				fsl,num-rx-queues = <3>;
+				nvmem-cells = <&fec_mac_address>;
+				nvmem-cell-names = "mac-address";
+				nvmem_macaddr_swap;
+				fsl,stop-mode = <&gpr 0x10 3>;
 				status = "disabled";
 			};