diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c index aa108ca153..458d90c871 100644 --- a/board/balloon3/balloon3.c +++ b/board/balloon3/balloon3.c @@ -29,7 +29,7 @@ int board_init(void) dcache_disable(); icache_disable(); - /* arch number of vpac270 */ + /* arch number of balloon3 */ gd->bd->bi_arch_number = MACH_TYPE_BALLOON3; /* adress of boot parameters */ diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c index 8d95e4d174..3def0a6fd0 100644 --- a/board/toradex/colibri_pxa270/colibri_pxa270.c +++ b/board/toradex/colibri_pxa270/colibri_pxa270.c @@ -23,7 +23,7 @@ int board_init(void) dcache_disable(); icache_disable(); - /* arch number of vpac270 */ + /* arch number of Toradex Colibri PXA270 */ gd->bd->bi_arch_number = MACH_TYPE_COLIBRI; /* adress of boot parameters */ diff --git a/include/configs/balloon3.h b/include/configs/balloon3.h index 2f5a6609b8..848a15832f 100644 --- a/include/configs/balloon3.h +++ b/include/configs/balloon3.h @@ -13,7 +13,7 @@ * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ -#define CONFIG_BALLOON3 1 /* Balloon3 board */ +#define CONFIG_BALLOON3 1 /* Balloon3 board */ /* * Environment settings @@ -84,18 +84,17 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */ /* * DRAM Map */ -#define CONFIG_NR_DRAM_BANKS 3 /* 2 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 3 /* 3 banks of DRAM */ #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */ #define PHYS_SDRAM_2 0xb0000000 /* SDRAM Bank #2 */ #define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */ -#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_3 0x80000000 /* SDRAM Bank #3 */ #define PHYS_SDRAM_3_SIZE 0x08000000 /* 128 MB */ #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ @@ -135,7 +134,7 @@ #define CONFIG_ENV_IS_IN_FLASH #else #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_SYS_MONITOR_BASE 0x000000 @@ -191,7 +190,6 @@ #define CONFIG_SYS_MDMRS_VAL 0x00220022 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 #define CONFIG_SYS_SXCNFG_VAL 0x00000000 -#define CONFIG_SYS_MEM_BUF_IMP 0x0f /* * PCMCIA and CF Interfaces diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 08bd276b44..7fc364e838 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -2,18 +2,22 @@ * Toradex Colibri PXA270 configuration file * * Copyright (C) 2010 Marek Vasut + * Copyright (C) 2015 Marcel Ziswiler * * SPDX-License-Identifier: GPL-2.0+ */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __CONFIG_H +#define __CONFIG_H /* * High Level Board Configuration Options */ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_TEXT_BASE 0x0 +/* Avoid overwriting factory configuration block */ +#define CONFIG_BOARD_SIZE_LIMIT 0x40000 /* * Environment settings @@ -22,13 +26,13 @@ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOOTCOMMAND \ - "if mmc init && fatload mmc 0 0xa0000000 uImage; then " \ + "if fatload mmc 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ "fi; " \ "if usb reset && fatload usb 0 0xa0000000 uImage; then " \ "bootm 0xa0000000; " \ "fi; " \ - "bootm 0x80000;" + "bootm 0xc0000;" #define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200" #define CONFIG_TIMESTAMP #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ @@ -50,6 +54,8 @@ */ #include +#undef CONFIG_CMD_LOADB /* Both together */ +#undef CONFIG_CMD_LOADS /* saves 10 KB */ #define CONFIG_CMD_NET #define CONFIG_CMD_ENV #undef CONFIG_CMD_IMLS @@ -59,7 +65,6 @@ /* * Networking Configuration - * chip on the Voipac PXA270 board */ #ifdef CONFIG_CMD_NET #define CONFIG_CMD_PING @@ -82,7 +87,7 @@ */ #define CONFIG_SYS_HUSH_PARSER 1 -#define CONFIG_SYS_LONGHELP +#undef CONFIG_SYS_LONGHELP /* Saves 10 KB */ #ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT "$ " #else @@ -96,7 +101,6 @@ #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_AUTO_COMPLETE 1 - /* * Clock Configuration */ @@ -142,25 +146,24 @@ #else /* No flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #define CONFIG_SYS_MONITOR_BASE 0x0 -#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x40000 +/* Skip factory configuration block */ #define CONFIG_ENV_ADDR \ - (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN + 0x40000) #define CONFIG_ENV_SIZE 0x40000 #define CONFIG_ENV_SECT_SIZE 0x40000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) /* * GPIO settings */ #define CONFIG_SYS_GPSR0_VAL 0x00000000 #define CONFIG_SYS_GPSR1_VAL 0x00020000 -#define CONFIG_SYS_GPSR2_VAL 0x0002C000 +#define CONFIG_SYS_GPSR2_VAL 0x0002c000 #define CONFIG_SYS_GPSR3_VAL 0x00000000 #define CONFIG_SYS_GPCR0_VAL 0x00000000 @@ -168,19 +171,19 @@ #define CONFIG_SYS_GPCR2_VAL 0x00000000 #define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0x08000000 -#define CONFIG_SYS_GPDR1_VAL 0x0002A981 -#define CONFIG_SYS_GPDR2_VAL 0x0202FC00 -#define CONFIG_SYS_GPDR3_VAL 0x00000000 +#define CONFIG_SYS_GPDR0_VAL 0xc8008000 +#define CONFIG_SYS_GPDR1_VAL 0xfc02a981 +#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff +#define CONFIG_SYS_GPDR3_VAL 0x0061e804 -#define CONFIG_SYS_GAFR0_L_VAL 0x00100000 -#define CONFIG_SYS_GAFR0_U_VAL 0x00C00010 -#define CONFIG_SYS_GAFR1_L_VAL 0x999A901A -#define CONFIG_SYS_GAFR1_U_VAL 0xAAA00008 -#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA -#define CONFIG_SYS_GAFR2_U_VAL 0x0109A000 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000300 -#define CONFIG_SYS_GAFR3_U_VAL 0x00024001 +#define CONFIG_SYS_GAFR0_L_VAL 0x80100000 +#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010 +#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a +#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008 +#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa +#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002 +#define CONFIG_SYS_GAFR3_L_VAL 0x54000310 +#define CONFIG_SYS_GAFR3_U_VAL 0x00005401 #define CONFIG_SYS_PSSR_VAL 0x30 @@ -193,26 +196,26 @@ /* * Memory settings */ -#define CONFIG_SYS_MSC0_VAL 0x000095f2 -#define CONFIG_SYS_MSC1_VAL 0x00007ff4 -#define CONFIG_SYS_MSC2_VAL 0x00000000 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ac9 -#define CONFIG_SYS_MDREFR_VAL 0x2013e01e -#define CONFIG_SYS_MDMRS_VAL 0x00320032 -#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2 +#define CONFIG_SYS_MSC1_VAL 0x9ee1f994 +#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1 +#define CONFIG_SYS_MDCNFG_VAL 0x090009c9 +#define CONFIG_SYS_MDREFR_VAL 0x2003a031 +#define CONFIG_SYS_MDMRS_VAL 0x00220022 +#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 /* * PCMCIA and CF Interfaces */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00028307 #define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 +#define CONFIG_SYS_MCATT0_VAL 0x00038787 #define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f +#define CONFIG_SYS_MCIO0_VAL 0x0002830f #define CONFIG_SYS_MCIO1_VAL 0x0001430f #include "pxa-common.h" -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/configs/flea3.h b/include/configs/flea3.h index bf02829cde..edff0f54cf 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -124,8 +124,6 @@ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index a145f0812f..603d17cef6 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -146,8 +146,6 @@ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* diff --git a/include/configs/palmld.h b/include/configs/palmld.h index 9480d8daf2..7dbc9aee3a 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -114,7 +114,6 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 8abce1b425..75506b22f3 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -116,7 +116,6 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x161 /* 400MHz;L=1 M=3 T=1 */ /* diff --git a/include/configs/palmtreo680.h b/include/configs/palmtreo680.h index 6490be5504..bd0f44b0d8 100644 --- a/include/configs/palmtreo680.h +++ b/include/configs/palmtreo680.h @@ -117,7 +117,6 @@ /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x210 /* 416MHz ; N=2,L=16 */ /* diff --git a/include/configs/snowball.h b/include/configs/snowball.h index dacb5604cd..126201cf96 100644 --- a/include/configs/snowball.h +++ b/include/configs/snowball.h @@ -175,7 +175,6 @@ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h index 87a4efcd5a..f69a559926 100644 --- a/include/configs/ti816x_evm.h +++ b/include/configs/ti816x_evm.h @@ -58,7 +58,6 @@ + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ #define CONFIG_CMD_ASKEN diff --git a/include/configs/u8500_href.h b/include/configs/u8500_href.h index 8d7970a376..5302b1fb81 100644 --- a/include/configs/u8500_href.h +++ b/include/configs/u8500_href.h @@ -131,7 +131,6 @@ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ #define CONFIG_SYS_LOADS_BAUD_CHANGE diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 2dea921045..989e755279 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -188,7 +188,6 @@ #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 /* Miscellaneous configurable options */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) #define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) #define CONFIG_BOOTDELAY 2 diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h index 2fb91a8f8c..887433b16f 100644 --- a/include/configs/vpac270.h +++ b/include/configs/vpac270.h @@ -221,7 +221,7 @@ #else /* No flash */ #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif /* @@ -297,7 +297,6 @@ #define CONFIG_SYS_MDMRS_VAL 0x00000000 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 -#define CONFIG_SYS_MEM_BUF_IMP 0x0f /* * PCMCIA and CF Interfaces diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h index c7a17f7a49..8e1c7a44cc 100644 --- a/include/configs/woodburn_common.h +++ b/include/configs/woodburn_common.h @@ -146,8 +146,6 @@ #define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ - #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR /* diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index fe331bc082..1dbbc15256 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -136,7 +136,6 @@ unsigned char zipitz2_spi_read(void); /* * Clock Configuration */ -#undef CONFIG_SYS_CLKS_IN_HZ #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ /*