mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
ppc4xx: Coding style cleanup
Wrap long lines etc. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
parent
17e65c21ad
commit
9ec367aa2c
@ -57,7 +57,7 @@
|
|||||||
#define CONFIG_MII 1 /* MII PHY management */
|
#define CONFIG_MII 1 /* MII PHY management */
|
||||||
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
||||||
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
|
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
|
||||||
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */
|
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() */
|
||||||
|
|
||||||
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
|
#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
|
||||||
|
|
||||||
@ -168,9 +168,8 @@
|
|||||||
|
|
||||||
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
#define CFG_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* NAND-FLASH stuff
|
* NAND-FLASH stuff
|
||||||
*-----------------------------------------------------------------------
|
|
||||||
*/
|
*/
|
||||||
#define CFG_NAND_BASE_LIST {CFG_NAND_BASE}
|
#define CFG_NAND_BASE_LIST {CFG_NAND_BASE}
|
||||||
#define NAND_MAX_CHIPS 1
|
#define NAND_MAX_CHIPS 1
|
||||||
@ -185,9 +184,8 @@
|
|||||||
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
#define CFG_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */
|
||||||
#define CFG_NAND_QUIET 1
|
#define CFG_NAND_QUIET 1
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* PCI stuff
|
* PCI stuff
|
||||||
*-----------------------------------------------------------------------
|
|
||||||
*/
|
*/
|
||||||
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
||||||
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
||||||
@ -212,22 +210,22 @@
|
|||||||
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
|
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
|
||||||
#define CFG_PCI_PTM2PCI 0x08000000 /* Host: use this pci address */
|
#define CFG_PCI_PTM2PCI 0x08000000 /* Host: use this pci address */
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* IDE/ATA stuff
|
* IDE/ATA stuff
|
||||||
*-----------------------------------------------------------------------
|
|
||||||
*/
|
*/
|
||||||
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
||||||
#undef CONFIG_IDE_LED /* no led for ide supported */
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
||||||
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
|
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
|
||||||
|
|
||||||
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
|
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */
|
||||||
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
|
/* max. 1 drives per IDE bus */
|
||||||
|
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1)
|
||||||
|
|
||||||
#define CFG_ATA_BASE_ADDR 0xF0100000
|
#define CFG_ATA_BASE_ADDR 0xF0100000
|
||||||
#define CFG_ATA_IDE0_OFFSET 0x0000
|
#define CFG_ATA_IDE0_OFFSET 0x0000
|
||||||
|
|
||||||
#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
|
#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */
|
||||||
#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */
|
#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register access */
|
||||||
#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
|
#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */
|
||||||
|
|
||||||
/*
|
/*
|
||||||
@ -236,7 +234,8 @@
|
|||||||
* the maximum mapped by the Linux kernel during initialization.
|
* the maximum mapped by the Linux kernel during initialization.
|
||||||
*/
|
*/
|
||||||
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
|
/*
|
||||||
* FLASH organization
|
* FLASH organization
|
||||||
*/
|
*/
|
||||||
#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
|
#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
|
||||||
@ -248,8 +247,8 @@
|
|||||||
#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
|
#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
|
||||||
|
|
||||||
#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
|
#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
|
||||||
#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
|
#define CFG_FLASH_ADDR0 0x5555 /* 1st addr for flash config cycles */
|
||||||
#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
|
#define CFG_FLASH_ADDR1 0x2AAA /* 2nd addr for flash config cycles */
|
||||||
/*
|
/*
|
||||||
* The following defines are added for buggy IOP480 byte interface.
|
* The following defines are added for buggy IOP480 byte interface.
|
||||||
* All other boards should use the standard values (CPCI405 etc.)
|
* All other boards should use the standard values (CPCI405 etc.)
|
||||||
@ -258,9 +257,9 @@
|
|||||||
#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
|
#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
|
||||||
#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
|
#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
|
||||||
|
|
||||||
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* Start addresses for the final memory configuration
|
* Start addresses for the final memory configuration
|
||||||
* (Set up by the startup code)
|
* (Set up by the startup code)
|
||||||
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||||||
@ -268,47 +267,39 @@
|
|||||||
#define CFG_SDRAM_BASE 0x00000000
|
#define CFG_SDRAM_BASE 0x00000000
|
||||||
#define CFG_FLASH_BASE 0xFFFA0000
|
#define CFG_FLASH_BASE 0xFFFA0000
|
||||||
#define CFG_MONITOR_BASE TEXT_BASE
|
#define CFG_MONITOR_BASE TEXT_BASE
|
||||||
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 256 kB for Monitor */
|
#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384kB for Monitor */
|
||||||
#define CFG_MALLOC_LEN (384 * 1024) /* Reserve 256 kB for malloc() */
|
#define CFG_MALLOC_LEN (384 * 1024) /* Reserve 384kB for malloc() */
|
||||||
|
|
||||||
#if (CFG_MONITOR_BASE < FLASH_BASE0_PRELIM)
|
/*
|
||||||
# define CFG_RAMBOOT 1
|
|
||||||
#else
|
|
||||||
# undef CFG_RAMBOOT
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Environment Variable setup
|
* Environment Variable setup
|
||||||
*/
|
*/
|
||||||
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
||||||
#define CFG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */
|
#define CFG_ENV_OFFSET 0x100 /* reseve 0x100 bytes for strapping */
|
||||||
#define CFG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/
|
#define CFG_ENV_SIZE 0x700
|
||||||
/* total size of a CAT24WC16 is 2048 bytes */
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* I2C EEPROM (CAT24WC16) for environment
|
* I2C EEPROM (24WC16) for environment
|
||||||
*/
|
*/
|
||||||
#define CONFIG_HARD_I2C /* I2c with hardware support */
|
#define CONFIG_HARD_I2C /* I2c with hardware support */
|
||||||
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||||||
#define CFG_I2C_SLAVE 0x7F
|
#define CFG_I2C_SLAVE 0x7F
|
||||||
|
|
||||||
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24WC08 */
|
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM 24WC16 */
|
||||||
#define CFG_EEPROM_WREN 1
|
#define CFG_EEPROM_WREN 1
|
||||||
|
|
||||||
/* CAT24WC08/16... */
|
/* 24WC16 */
|
||||||
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
||||||
/* mask of address bits that overflow into the "EEPROM chip address" */
|
/* mask of address bits that overflow into the "EEPROM chip address" */
|
||||||
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
|
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
|
||||||
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
|
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The 24WC16 has */
|
||||||
/* 16 byte page write mode using */
|
/* 16 byte page write mode using */
|
||||||
/* last 4 bits of the address */
|
/* last 4 bits of the address */
|
||||||
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
||||||
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* External Bus Controller (EBC) Setup
|
* External Bus Controller (EBC) Setup
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define CAN_BA 0xF0000000 /* CAN Base Address */
|
#define CAN_BA 0xF0000000 /* CAN Base Address */
|
||||||
#define DUART0_BA 0xF0000400 /* DUART Base Address */
|
#define DUART0_BA 0xF0000400 /* DUART Base Address */
|
||||||
#define DUART1_BA 0xF0000408 /* DUART Base Address */
|
#define DUART1_BA 0xF0000408 /* DUART Base Address */
|
||||||
@ -317,26 +308,31 @@
|
|||||||
#define CFG_NAND_BASE 0xF4000000 /* NAND FLASH Base Address */
|
#define CFG_NAND_BASE 0xF4000000 /* NAND FLASH Base Address */
|
||||||
|
|
||||||
/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
|
/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
|
||||||
|
/* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
|
||||||
#define CFG_EBC_PB0AP 0x92015480
|
#define CFG_EBC_PB0AP 0x92015480
|
||||||
/*#define CFG_EBC_PB0AP 0x08055880 /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
|
/* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
|
||||||
#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
|
#define CFG_EBC_PB0CR 0xFFC5A000
|
||||||
|
|
||||||
/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */
|
/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */
|
||||||
#define CFG_EBC_PB1AP 0x92015480
|
#define CFG_EBC_PB1AP 0x92015480
|
||||||
#define CFG_EBC_PB1CR 0xF4018000 /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */
|
/* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */
|
||||||
|
#define CFG_EBC_PB1CR 0xF4018000
|
||||||
|
|
||||||
/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */
|
/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */
|
||||||
#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
/* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
||||||
#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
|
#define CFG_EBC_PB2AP 0x010053C0
|
||||||
|
/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
|
||||||
|
#define CFG_EBC_PB2CR 0xF0018000
|
||||||
|
|
||||||
/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization */
|
/* Memory Bank 3 (16 Bit Peripheral: FPGA internal, dig. IO) initialization */
|
||||||
#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
/* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */
|
||||||
#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
|
#define CFG_EBC_PB3AP 0x010053C0
|
||||||
|
/* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */
|
||||||
|
#define CFG_EBC_PB3CR 0xF011A000
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* FPGA stuff
|
* FPGA stuff
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define CFG_FPGA_BASE_ADDR 0xF0100100 /* FPGA internal Base Address */
|
#define CFG_FPGA_BASE_ADDR 0xF0100100 /* FPGA internal Base Address */
|
||||||
|
|
||||||
/* FPGA internal regs */
|
/* FPGA internal regs */
|
||||||
@ -357,7 +353,7 @@
|
|||||||
#define CFG_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
|
#define CFG_FPGA_INIT 0x00010000 /* FPGA init pin (ppc input) */
|
||||||
#define CFG_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
|
#define CFG_FPGA_DONE 0x00008000 /* FPGA done pin (ppc input) */
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* Definitions for initial stack pointer and data area (in data cache)
|
* Definitions for initial stack pointer and data area (in data cache)
|
||||||
*/
|
*/
|
||||||
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
|
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
|
||||||
@ -373,7 +369,7 @@
|
|||||||
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||||||
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
/*
|
||||||
* Definitions for GPIO setup (PPC405EP specific)
|
* Definitions for GPIO setup (PPC405EP specific)
|
||||||
*
|
*
|
||||||
* GPIO0[0] - External Bus Controller BLAST output
|
* GPIO0[0] - External Bus Controller BLAST output
|
||||||
@ -405,7 +401,7 @@
|
|||||||
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* Default speed selection (cpu_plb_opb_ebc) in mhz.
|
* Default speed selection (cpu_plb_opb_ebc) in MHz.
|
||||||
* This value will be set if iic boot eprom is disabled.
|
* This value will be set if iic boot eprom is disabled.
|
||||||
*/
|
*/
|
||||||
#if 1
|
#if 1
|
||||||
|
Loading…
Reference in New Issue
Block a user