imx: mx25: Remove legacy iomux support

Legacy iomux support is no longer needed now that all boards have been converted
to iomux-v3.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
This commit is contained in:
Benoît Thébaudeau 2013-05-03 10:32:18 +00:00 committed by Stefano Babic
parent b597ff6be9
commit 9e933b43f3
3 changed files with 0 additions and 570 deletions

View File

@ -27,7 +27,6 @@
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/imx25-pinmux.h>
#include <asm/arch/clock.h>
#ifdef CONFIG_FSL_ESDHC
@ -248,123 +247,7 @@ int cpu_mmc_init(bd_t *bis)
}
#endif
#ifdef CONFIG_MXC_UART
void mx25_uart1_init_pins(void)
{
struct iomuxc_mux_ctl *muxctl;
struct iomuxc_pad_ctl *padctl;
u32 inpadctl;
u32 outpadctl;
u32 muxmode0;
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
muxmode0 = MX25_PIN_MUX_MODE(0);
/*
* set up input pins with hysteresis and 100K pull-ups
*/
inpadctl = MX25_PIN_PAD_CTL_HYS
| MX25_PIN_PAD_CTL_PKE
| MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU;
/*
* set up output pins with 100K pull-downs
* FIXME: need to revisit this
* PUE is ignored if PKE is not set
* so the right value here is likely
* 0x0 for no pull up/down
* or
* 0xc0 for 100k pull down
*/
outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
/* UART1 */
/* rxd */
writel(muxmode0, &muxctl->pad_uart1_rxd);
writel(inpadctl, &padctl->pad_uart1_rxd);
/* txd */
writel(muxmode0, &muxctl->pad_uart1_txd);
writel(outpadctl, &padctl->pad_uart1_txd);
/* rts */
writel(muxmode0, &muxctl->pad_uart1_rts);
writel(outpadctl, &padctl->pad_uart1_rts);
/* cts */
writel(muxmode0, &muxctl->pad_uart1_cts);
writel(inpadctl, &padctl->pad_uart1_cts);
}
#endif /* CONFIG_MXC_UART */
#ifdef CONFIG_FEC_MXC
void mx25_fec_init_pins(void)
{
struct iomuxc_mux_ctl *muxctl;
struct iomuxc_pad_ctl *padctl;
u32 inpadctl_100kpd;
u32 inpadctl_22kpu;
u32 outpadctl;
u32 muxmode0;
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
muxmode0 = MX25_PIN_MUX_MODE(0);
inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS
| MX25_PIN_PAD_CTL_PKE
| MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS
| MX25_PIN_PAD_CTL_PKE
| MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU;
/*
* set up output pins with 100K pull-downs
* FIXME: need to revisit this
* PUE is ignored if PKE is not set
* so the right value here is likely
* 0x0 for no pull
* or
* 0xc0 for 100k pull down
*/
outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD;
/* FEC_TX_CLK */
writel(muxmode0, &muxctl->pad_fec_tx_clk);
writel(inpadctl_100kpd, &padctl->pad_fec_tx_clk);
/* FEC_RX_DV */
writel(muxmode0, &muxctl->pad_fec_rx_dv);
writel(inpadctl_100kpd, &padctl->pad_fec_rx_dv);
/* FEC_RDATA0 */
writel(muxmode0, &muxctl->pad_fec_rdata0);
writel(inpadctl_100kpd, &padctl->pad_fec_rdata0);
/* FEC_TDATA0 */
writel(muxmode0, &muxctl->pad_fec_tdata0);
writel(outpadctl, &padctl->pad_fec_tdata0);
/* FEC_TX_EN */
writel(muxmode0, &muxctl->pad_fec_tx_en);
writel(outpadctl, &padctl->pad_fec_tx_en);
/* FEC_MDC */
writel(muxmode0, &muxctl->pad_fec_mdc);
writel(outpadctl, &padctl->pad_fec_mdc);
/* FEC_MDIO */
writel(muxmode0, &muxctl->pad_fec_mdio);
writel(inpadctl_22kpu, &padctl->pad_fec_mdio);
/* FEC_RDATA1 */
writel(muxmode0, &muxctl->pad_fec_rdata1);
writel(inpadctl_100kpd, &padctl->pad_fec_rdata1);
/* FEC_TDATA1 */
writel(muxmode0, &muxctl->pad_fec_tdata1);
writel(outpadctl, &padctl->pad_fec_tdata1);
}
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;

View File

@ -1,421 +0,0 @@
/*
* iopin settings are controlled by four different sets of registers
* iopad mux control
* individual iopad setup (voltage select, pull/keep, drive strength ...)
* group iopad setup (same as above but for groups of signals)
* input select when multiple inputs are possible
*/
/*
* software pad mux control
*/
/* SW Input On (Loopback) */
#define MX25_PIN_MUX_SION (1 << 4)
/* MUX Mode (0-7) */
#define MX25_PIN_MUX_MODE(mode) ((mode & 0x7) << 0)
struct iomuxc_mux_ctl {
u32 gpr1;
u32 observe_int_mux;
u32 pad_a10;
u32 pad_a13;
u32 pad_a14;
u32 pad_a15;
u32 pad_a16;
u32 pad_a17;
u32 pad_a18;
u32 pad_a19;
u32 pad_a20;
u32 pad_a21;
u32 pad_a22;
u32 pad_a23;
u32 pad_a24;
u32 pad_a25;
u32 pad_eb0;
u32 pad_eb1;
u32 pad_oe;
u32 pad_cs0;
u32 pad_cs1;
u32 pad_cs4;
u32 pad_cs5;
u32 pad_nf_ce0;
u32 pad_ecb;
u32 pad_lba;
u32 pad_bclk;
u32 pad_rw;
u32 pad_nfwe_b;
u32 pad_nfre_b;
u32 pad_nfale;
u32 pad_nfcle;
u32 pad_nfwp_b;
u32 pad_nfrb;
u32 pad_d15;
u32 pad_d14;
u32 pad_d13;
u32 pad_d12;
u32 pad_d11;
u32 pad_d10;
u32 pad_d9;
u32 pad_d8;
u32 pad_d7;
u32 pad_d6;
u32 pad_d5;
u32 pad_d4;
u32 pad_d3;
u32 pad_d2;
u32 pad_d1;
u32 pad_d0;
u32 pad_ld0;
u32 pad_ld1;
u32 pad_ld2;
u32 pad_ld3;
u32 pad_ld4;
u32 pad_ld5;
u32 pad_ld6;
u32 pad_ld7;
u32 pad_ld8;
u32 pad_ld9;
u32 pad_ld10;
u32 pad_ld11;
u32 pad_ld12;
u32 pad_ld13;
u32 pad_ld14;
u32 pad_ld15;
u32 pad_hsync;
u32 pad_vsync;
u32 pad_lsclk;
u32 pad_oe_acd;
u32 pad_contrast;
u32 pad_pwm;
u32 pad_csi_d2;
u32 pad_csi_d3;
u32 pad_csi_d4;
u32 pad_csi_d5;
u32 pad_csi_d6;
u32 pad_csi_d7;
u32 pad_csi_d8;
u32 pad_csi_d9;
u32 pad_csi_mclk;
u32 pad_csi_vsync;
u32 pad_csi_hsync;
u32 pad_csi_pixclk;
u32 pad_i2c1_clk;
u32 pad_i2c1_dat;
u32 pad_cspi1_mosi;
u32 pad_cspi1_miso;
u32 pad_cspi1_ss0;
u32 pad_cspi1_ss1;
u32 pad_cspi1_sclk;
u32 pad_cspi1_rdy;
u32 pad_uart1_rxd;
u32 pad_uart1_txd;
u32 pad_uart1_rts;
u32 pad_uart1_cts;
u32 pad_uart2_rxd;
u32 pad_uart2_txd;
u32 pad_uart2_rts;
u32 pad_uart2_cts;
u32 pad_sd1_cmd;
u32 pad_sd1_clk;
u32 pad_sd1_data0;
u32 pad_sd1_data1;
u32 pad_sd1_data2;
u32 pad_sd1_data3;
u32 pad_kpp_row0;
u32 pad_kpp_row1;
u32 pad_kpp_row2;
u32 pad_kpp_row3;
u32 pad_kpp_col0;
u32 pad_kpp_col1;
u32 pad_kpp_col2;
u32 pad_kpp_col3;
u32 pad_fec_mdc;
u32 pad_fec_mdio;
u32 pad_fec_tdata0;
u32 pad_fec_tdata1;
u32 pad_fec_tx_en;
u32 pad_fec_rdata0;
u32 pad_fec_rdata1;
u32 pad_fec_rx_dv;
u32 pad_fec_tx_clk;
u32 pad_rtck;
u32 pad_de_b;
u32 pad_gpio_a;
u32 pad_gpio_b;
u32 pad_gpio_c;
u32 pad_gpio_d;
u32 pad_gpio_e;
u32 pad_gpio_f;
u32 pad_ext_armclk;
u32 pad_upll_bypclk;
u32 pad_vstby_req;
u32 pad_vstby_ack;
u32 pad_power_fail;
u32 pad_clko;
u32 pad_boot_mode0;
u32 pad_boot_mode1;
};
/*
* software pad control
*/
/* Select 3.3 or 1.8 volts */
#define MX25_PIN_PAD_CTL_DVS_33 (0 << 13)
#define MX25_PIN_PAD_CTL_DVS_18 (1 << 13)
/* Enable hysteresis */
#define MX25_PIN_PAD_CTL_HYS (1 << 8)
/* Enable pull/keeper */
#define MX25_PIN_PAD_CTL_PKE (1 << 7)
/* 0 - keeper / 1 - pull */
#define MX25_PIN_PAD_CTL_PUE (1 << 6)
/* pull up/down strength */
#define MX25_PIN_PAD_CTL_100K_PD (0 << 4)
#define MX25_PIN_PAD_CTL_47K_PU (1 << 4)
#define MX25_PIN_PAD_CTL_100K_PU (2 << 4)
#define MX25_PIN_PAD_CTL_22K_PU (3 << 4)
/* open drain control */
#define MX25_PIN_PAD_CTL_OD (1 << 3)
/* drive strength */
#define MX25_PIN_PAD_CTL_DS_NOM (0 << 1)
#define MX25_PIN_PAD_CTL_DS_HIGH (1 << 1)
#define MX25_PIN_PAD_CTL_DS_MAX (2 << 1)
#define MX25_PIN_PAD_CTL_DS_MAX11 (3 << 1)
/* slew rate */
#define MX25_PIN_PAD_CTL_SRE_SLOW (0 << 0)
#define MX25_PIN_PAD_CTL_SRE_FAST (1 << 0)
struct iomuxc_pad_ctl {
u32 pad_a13;
u32 pad_a14;
u32 pad_a15;
u32 pad_a17;
u32 pad_a18;
u32 pad_a19;
u32 pad_a20;
u32 pad_a21;
u32 pad_a23;
u32 pad_a24;
u32 pad_a25;
u32 pad_eb0;
u32 pad_eb1;
u32 pad_oe;
u32 pad_cs4;
u32 pad_cs5;
u32 pad_nf_ce0;
u32 pad_ecb;
u32 pad_lba;
u32 pad_rw;
u32 pad_nfrb;
u32 pad_d15;
u32 pad_d14;
u32 pad_d13;
u32 pad_d12;
u32 pad_d11;
u32 pad_d10;
u32 pad_d9;
u32 pad_d8;
u32 pad_d7;
u32 pad_d6;
u32 pad_d5;
u32 pad_d4;
u32 pad_d3;
u32 pad_d2;
u32 pad_d1;
u32 pad_d0;
u32 pad_ld0;
u32 pad_ld1;
u32 pad_ld2;
u32 pad_ld3;
u32 pad_ld4;
u32 pad_ld5;
u32 pad_ld6;
u32 pad_ld7;
u32 pad_ld8;
u32 pad_ld9;
u32 pad_ld10;
u32 pad_ld11;
u32 pad_ld12;
u32 pad_ld13;
u32 pad_ld14;
u32 pad_ld15;
u32 pad_hsync;
u32 pad_vsync;
u32 pad_lsclk;
u32 pad_oe_acd;
u32 pad_contrast;
u32 pad_pwm;
u32 pad_csi_d2;
u32 pad_csi_d3;
u32 pad_csi_d4;
u32 pad_csi_d5;
u32 pad_csi_d6;
u32 pad_csi_d7;
u32 pad_csi_d8;
u32 pad_csi_d9;
u32 pad_csi_mclk;
u32 pad_csi_vsync;
u32 pad_csi_hsync;
u32 pad_csi_pixclk;
u32 pad_i2c1_clk;
u32 pad_i2c1_dat;
u32 pad_cspi1_mosi;
u32 pad_cspi1_miso;
u32 pad_cspi1_ss0;
u32 pad_cspi1_ss1;
u32 pad_cspi1_sclk;
u32 pad_cspi1_rdy;
u32 pad_uart1_rxd;
u32 pad_uart1_txd;
u32 pad_uart1_rts;
u32 pad_uart1_cts;
u32 pad_uart2_rxd;
u32 pad_uart2_txd;
u32 pad_uart2_rts;
u32 pad_uart2_cts;
u32 pad_sd1_cmd;
u32 pad_sd1_clk;
u32 pad_sd1_data0;
u32 pad_sd1_data1;
u32 pad_sd1_data2;
u32 pad_sd1_data3;
u32 pad_kpp_row0;
u32 pad_kpp_row1;
u32 pad_kpp_row2;
u32 pad_kpp_row3;
u32 pad_kpp_col0;
u32 pad_kpp_col1;
u32 pad_kpp_col2;
u32 pad_kpp_col3;
u32 pad_fec_mdc;
u32 pad_fec_mdio;
u32 pad_fec_tdata0;
u32 pad_fec_tdata1;
u32 pad_fec_tx_en;
u32 pad_fec_rdata0;
u32 pad_fec_rdata1;
u32 pad_fec_rx_dv;
u32 pad_fec_tx_clk;
u32 pad_rtck;
u32 pad_tdo;
u32 pad_de_b;
u32 pad_gpio_a;
u32 pad_gpio_b;
u32 pad_gpio_c;
u32 pad_gpio_d;
u32 pad_gpio_e;
u32 pad_gpio_f;
u32 pad_vstby_req;
u32 pad_vstby_ack;
u32 pad_power_fail;
u32 pad_clko;
};
/*
* Pad group drive strength and voltage select
* Same fields as iomuxc_pad_ctl plus ddr type
*/
/* Select DDR type */
#define MX25_PIN_PAD_CTL_DDR_18 (0 << 11)
#define MX25_PIN_PAD_CTL_DDR_33 (1 << 11)
#define MX25_PIN_PAD_CTL_DDR_MAX (2 << 11)
struct iomuxc_pad_grp_ctl {
u32 grp_dvs_misc;
u32 grp_dse_fec;
u32 grp_dvs_jtag;
u32 grp_dse_nfc;
u32 grp_dse_csi;
u32 grp_dse_weim;
u32 grp_dse_ddr;
u32 grp_dvs_crm;
u32 grp_dse_kpp;
u32 grp_dse_sdhc1;
u32 grp_dse_lcd;
u32 grp_dse_uart;
u32 grp_dvs_nfc;
u32 grp_dvs_csi;
u32 grp_dse_cspi1;
u32 grp_ddrtype;
u32 grp_dvs_sdhc1;
u32 grp_dvs_lcd;
};
/*
* Pad input select control
* Select which pad to connect to an input port
* where multiple pads can function as given input
*/
#define MX25_PAD_INPUT_SELECT_DAISY(in) ((in & 0x7) << 0)
struct iomuxc_pad_input_select {
u32 audmux_p4_input_da_amx;
u32 audmux_p4_input_db_amx;
u32 audmux_p4_input_rxclk_amx;
u32 audmux_p4_input_rxfs_amx;
u32 audmux_p4_input_txclk_amx;
u32 audmux_p4_input_txfs_amx;
u32 audmux_p7_input_da_amx;
u32 audmux_p7_input_txfs_amx;
u32 can1_ipp_ind_canrx;
u32 can2_ipp_ind_canrx;
u32 csi_ipp_csi_d_0;
u32 csi_ipp_csi_d_1;
u32 cspi1_ipp_ind_ss3_b;
u32 cspi2_ipp_cspi_clk_in;
u32 cspi2_ipp_ind_dataready_b;
u32 cspi2_ipp_ind_miso;
u32 cspi2_ipp_ind_mosi;
u32 cspi2_ipp_ind_ss0_b;
u32 cspi2_ipp_ind_ss1_b;
u32 cspi3_ipp_cspi_clk_in;
u32 cspi3_ipp_ind_dataready_b;
u32 cspi3_ipp_ind_miso;
u32 cspi3_ipp_ind_mosi;
u32 cspi3_ipp_ind_ss0_b;
u32 cspi3_ipp_ind_ss1_b;
u32 cspi3_ipp_ind_ss2_b;
u32 cspi3_ipp_ind_ss3_b;
u32 esdhc1_ipp_dat4_in;
u32 esdhc1_ipp_dat5_in;
u32 esdhc1_ipp_dat6_in;
u32 esdhc1_ipp_dat7_in;
u32 esdhc2_ipp_card_clk_in;
u32 esdhc2_ipp_cmd_in;
u32 esdhc2_ipp_dat0_in;
u32 esdhc2_ipp_dat1_in;
u32 esdhc2_ipp_dat2_in;
u32 esdhc2_ipp_dat3_in;
u32 esdhc2_ipp_dat4_in;
u32 esdhc2_ipp_dat5_in;
u32 esdhc2_ipp_dat6_in;
u32 esdhc2_ipp_dat7_in;
u32 fec_fec_col;
u32 fec_fec_crs;
u32 fec_fec_rdata_2;
u32 fec_fec_rdata_3;
u32 fec_fec_rx_clk;
u32 fec_fec_rx_er;
u32 i2c2_ipp_scl_in;
u32 i2c2_ipp_sda_in;
u32 i2c3_ipp_scl_in;
u32 i2c3_ipp_sda_in;
u32 kpp_ipp_ind_col_4;
u32 kpp_ipp_ind_col_5;
u32 kpp_ipp_ind_col_6;
u32 kpp_ipp_ind_col_7;
u32 kpp_ipp_ind_row_4;
u32 kpp_ipp_ind_row_5;
u32 kpp_ipp_ind_row_6;
u32 kpp_ipp_ind_row_7;
u32 sim1_pin_sim_rcvd1_in;
u32 sim1_pin_sim_simpd1;
u32 sim1_sim_rcvd1_io;
u32 sim2_pin_sim_rcvd1_in;
u32 sim2_pin_sim_simpd1;
u32 sim2_sim_rcvd1_io;
u32 uart3_ipp_uart_rts_b;
u32 uart3_ipp_uart_rxd_mux;
u32 uart4_ipp_uart_rts_b;
u32 uart4_ipp_uart_rxd_mux;
u32 uart5_ipp_uart_rts_b;
u32 uart5_ipp_uart_rxd_mux;
u32 usb_top_ipp_ind_otg_usb_oc;
u32 usb_top_ipp_ind_uh2_usb_oc;
};

View File

@ -1,32 +0,0 @@
/*
* (C) Copyright 2009
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
void mx25_uart1_init_pins(void);
#if defined CONFIG_FEC_MXC
extern void mx25_fec_init_pins(void);
#endif
#endif