ARM: dts: dra7x: Make pinctrl and IOdelays for MMC2 available in SPL

The SPL can't use high speed MMC modes if the associated pinctrl and
IOdelays are described in the DTS.
Make them available in SPL by tagging the nodes with 'u-boot,dm-spl;'

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
This commit is contained in:
Jean-Jacques Hiblot 2018-02-27 17:05:50 +01:00 committed by Tom Rini
parent 3f0996291b
commit 938c3cfb80
4 changed files with 80 additions and 0 deletions

View File

@ -13,3 +13,23 @@
&pcf_hdmi{
u-boot,i2c-offset-len = <0>;
};
&mmc2_pins_default {
u-boot,dm-spl;
};
&mmc2_pins_hs {
u-boot,dm-spl;
};
&mmc2_pins_ddr_rev20 {
u-boot,dm-spl;
};
&mmc2_pins_hs200 {
u-boot,dm-spl;
};
&mmc2_iodelay_hs200_rev20_conf {
u-boot,dm-spl;
};

View File

@ -21,3 +21,27 @@
&cpsw_emac1 {
phy-handle = <&dp83867_1>;
};
&mmc2_pins_default {
u-boot,dm-spl;
};
&mmc2_pins_hs {
u-boot,dm-spl;
};
&mmc2_pins_ddr_rev20 {
u-boot,dm-spl;
};
&mmc2_iodelay_ddr_conf {
u-boot,dm-spl;
};
&mmc2_pins_hs200 {
u-boot,dm-spl;
};
&mmc2_iodelay_hs200_rev20_conf {
u-boot,dm-spl;
};

View File

@ -21,3 +21,27 @@
&cpsw_emac1 {
phy-handle = <&dp83867_1>;
};
&mmc2_pins_default {
u-boot,dm-spl;
};
&mmc2_pins_hs {
u-boot,dm-spl;
};
&mmc2_pins_ddr_rev20 {
u-boot,dm-spl;
};
&mmc2_iodelay_ddr_conf {
u-boot,dm-spl;
};
&mmc2_pins_hs200 {
u-boot,dm-spl;
};
&mmc2_iodelay_hs200_rev20_conf {
u-boot,dm-spl;
};

View File

@ -13,3 +13,15 @@
&cpsw_emac1 {
phy-handle = <&dp83867_1>;
};
&mmc2_pins_default {
u-boot,dm-spl;
};
&mmc2_pins_hs200 {
u-boot,dm-spl;
};
&mmc2_iodelay_hs200_conf {
u-boot,dm-spl;
};