mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
ARMV7: Restructure OMAP i2c driver to allow code sharing between OMAP3 and OMAP4
This patch modifies the omap24xx driver so that it will also work with OMAP4. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
This commit is contained in:
parent
bec3dc7599
commit
938717cee1
|
@ -20,9 +20,10 @@
|
||||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
* MA 02111-1307 USA
|
* MA 02111-1307 USA
|
||||||
*/
|
*/
|
||||||
#ifndef _I2C_H_
|
#ifndef _OMAP3_I2C_H_
|
||||||
#define _I2C_H_
|
#define _OMAP3_I2C_H_
|
||||||
|
|
||||||
|
#define I2C_BUS_MAX 3
|
||||||
#define I2C_DEFAULT_BASE I2C_BASE1
|
#define I2C_DEFAULT_BASE I2C_BASE1
|
||||||
|
|
||||||
struct i2c {
|
struct i2c {
|
||||||
|
@ -58,146 +59,4 @@ struct i2c {
|
||||||
unsigned short res15;
|
unsigned short res15;
|
||||||
};
|
};
|
||||||
|
|
||||||
#define I2C_BUS_MAX 3
|
#endif /* _OMAP3_I2C_H_ */
|
||||||
|
|
||||||
/* I2C masks */
|
|
||||||
|
|
||||||
/* I2C Interrupt Enable Register (I2C_IE): */
|
|
||||||
#define I2C_IE_GC_IE (1 << 5)
|
|
||||||
#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
|
|
||||||
#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
|
|
||||||
#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
|
|
||||||
#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
|
|
||||||
#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
|
|
||||||
|
|
||||||
/* I2C Status Register (I2C_STAT): */
|
|
||||||
|
|
||||||
#define I2C_STAT_SBD (1 << 15) /* Single byte data */
|
|
||||||
#define I2C_STAT_BB (1 << 12) /* Bus busy */
|
|
||||||
#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
|
|
||||||
#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
|
|
||||||
#define I2C_STAT_AAS (1 << 9) /* Address as slave */
|
|
||||||
#define I2C_STAT_GC (1 << 5)
|
|
||||||
#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
|
|
||||||
#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
|
|
||||||
#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
|
|
||||||
#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
|
|
||||||
#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
|
|
||||||
|
|
||||||
/* I2C Interrupt Code Register (I2C_INTCODE): */
|
|
||||||
|
|
||||||
#define I2C_INTCODE_MASK 7
|
|
||||||
#define I2C_INTCODE_NONE 0
|
|
||||||
#define I2C_INTCODE_AL 1 /* Arbitration lost */
|
|
||||||
#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
|
|
||||||
#define I2C_INTCODE_ARDY 3 /* Register access ready */
|
|
||||||
#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
|
|
||||||
#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
|
|
||||||
|
|
||||||
/* I2C Buffer Configuration Register (I2C_BUF): */
|
|
||||||
|
|
||||||
#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
|
|
||||||
#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
|
|
||||||
|
|
||||||
/* I2C Configuration Register (I2C_CON): */
|
|
||||||
|
|
||||||
#define I2C_CON_EN (1 << 15) /* I2C module enable */
|
|
||||||
#define I2C_CON_BE (1 << 14) /* Big endian mode */
|
|
||||||
#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
|
|
||||||
#define I2C_CON_MST (1 << 10) /* Master/slave mode */
|
|
||||||
#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */
|
|
||||||
/* (master mode only) */
|
|
||||||
#define I2C_CON_XA (1 << 8) /* Expand address */
|
|
||||||
#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
|
|
||||||
#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
|
|
||||||
|
|
||||||
/* I2C System Test Register (I2C_SYSTEST): */
|
|
||||||
|
|
||||||
#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
|
|
||||||
#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */
|
|
||||||
#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
|
|
||||||
#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
|
|
||||||
#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
|
|
||||||
#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
|
|
||||||
#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
|
|
||||||
#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
|
|
||||||
|
|
||||||
#define I2C_SCLL_SCLL 0
|
|
||||||
#define I2C_SCLL_SCLL_M 0xFF
|
|
||||||
#define I2C_SCLL_HSSCLL 8
|
|
||||||
#define I2C_SCLH_HSSCLL_M 0xFF
|
|
||||||
#define I2C_SCLH_SCLH 0
|
|
||||||
#define I2C_SCLH_SCLH_M 0xFF
|
|
||||||
#define I2C_SCLH_HSSCLH 8
|
|
||||||
#define I2C_SCLH_HSSCLH_M 0xFF
|
|
||||||
|
|
||||||
#define OMAP_I2C_STANDARD 100000
|
|
||||||
#define OMAP_I2C_FAST_MODE 400000
|
|
||||||
#define OMAP_I2C_HIGH_SPEED 3400000
|
|
||||||
|
|
||||||
#define SYSTEM_CLOCK_12 12000000
|
|
||||||
#define SYSTEM_CLOCK_13 13000000
|
|
||||||
#define SYSTEM_CLOCK_192 19200000
|
|
||||||
#define SYSTEM_CLOCK_96 96000000
|
|
||||||
|
|
||||||
/* Use the reference value of 96MHz if not explicitly set by the board */
|
|
||||||
#ifndef I2C_IP_CLK
|
|
||||||
#define I2C_IP_CLK SYSTEM_CLOCK_96
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* The reference minimum clock for high speed is 19.2MHz.
|
|
||||||
* The linux 2.6.30 kernel uses this value.
|
|
||||||
* The reference minimum clock for fast mode is 9.6MHz
|
|
||||||
* The reference minimum clock for standard mode is 4MHz
|
|
||||||
* In TRM, the value of 12MHz is used.
|
|
||||||
*/
|
|
||||||
#ifndef I2C_INTERNAL_SAMPLING_CLK
|
|
||||||
#define I2C_INTERNAL_SAMPLING_CLK 19200000
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* The equation for the low and high time is
|
|
||||||
* tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed
|
|
||||||
* thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed
|
|
||||||
*
|
|
||||||
* If the duty cycle is 50%
|
|
||||||
*
|
|
||||||
* tlow = scll + scll_trim = sampling clock / (2 * speed)
|
|
||||||
* thigh = sclh + sclh_trim = sampling clock / (2 * speed)
|
|
||||||
*
|
|
||||||
* In TRM
|
|
||||||
* scll_trim = 7
|
|
||||||
* sclh_trim = 5
|
|
||||||
*
|
|
||||||
* The linux 2.6.30 kernel uses
|
|
||||||
* scll_trim = 6
|
|
||||||
* sclh_trim = 6
|
|
||||||
*
|
|
||||||
* These are the trim values for standard and fast speed
|
|
||||||
*/
|
|
||||||
#ifndef I2C_FASTSPEED_SCLL_TRIM
|
|
||||||
#define I2C_FASTSPEED_SCLL_TRIM 6
|
|
||||||
#endif
|
|
||||||
#ifndef I2C_FASTSPEED_SCLH_TRIM
|
|
||||||
#define I2C_FASTSPEED_SCLH_TRIM 6
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* These are the trim values for high speed */
|
|
||||||
#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
|
|
||||||
#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
|
|
||||||
#endif
|
|
||||||
#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
|
|
||||||
#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
|
|
||||||
#endif
|
|
||||||
#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
|
|
||||||
#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
|
|
||||||
#endif
|
|
||||||
#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
|
|
||||||
#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define I2C_PSC_MAX 0x0f
|
|
||||||
#define I2C_PSC_MIN 0x00
|
|
||||||
|
|
||||||
#endif /* _I2C_H_ */
|
|
||||||
|
|
74
arch/arm/include/asm/arch-omap4/i2c.h
Normal file
74
arch/arm/include/asm/arch-omap4/i2c.h
Normal file
|
@ -0,0 +1,74 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2004-2010
|
||||||
|
* Texas Instruments, <www.ti.com>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
#ifndef _OMAP4_I2C_H_
|
||||||
|
#define _OMAP4_I2C_H_
|
||||||
|
|
||||||
|
#define I2C_BUS_MAX 3
|
||||||
|
#define I2C_DEFAULT_BASE I2C_BASE1
|
||||||
|
|
||||||
|
struct i2c {
|
||||||
|
unsigned short revnb_lo; /* 0x00 */
|
||||||
|
unsigned short res1;
|
||||||
|
unsigned short revnb_hi; /* 0x04 */
|
||||||
|
unsigned short res2[13];
|
||||||
|
unsigned short sysc; /* 0x20 */
|
||||||
|
unsigned short res3;
|
||||||
|
unsigned short irqstatus_raw; /* 0x24 */
|
||||||
|
unsigned short res4;
|
||||||
|
unsigned short stat; /* 0x28 */
|
||||||
|
unsigned short res5;
|
||||||
|
unsigned short ie; /* 0x2C */
|
||||||
|
unsigned short res6;
|
||||||
|
unsigned short irqenable_clr; /* 0x30 */
|
||||||
|
unsigned short res7;
|
||||||
|
unsigned short iv; /* 0x34 */
|
||||||
|
unsigned short res8[45];
|
||||||
|
unsigned short syss; /* 0x90 */
|
||||||
|
unsigned short res9;
|
||||||
|
unsigned short buf; /* 0x94 */
|
||||||
|
unsigned short res10;
|
||||||
|
unsigned short cnt; /* 0x98 */
|
||||||
|
unsigned short res11;
|
||||||
|
unsigned short data; /* 0x9C */
|
||||||
|
unsigned short res13;
|
||||||
|
unsigned short res14; /* 0xA0 */
|
||||||
|
unsigned short res15;
|
||||||
|
unsigned short con; /* 0xA4 */
|
||||||
|
unsigned short res16;
|
||||||
|
unsigned short oa; /* 0xA8 */
|
||||||
|
unsigned short res17;
|
||||||
|
unsigned short sa; /* 0xAC */
|
||||||
|
unsigned short res18;
|
||||||
|
unsigned short psc; /* 0xB0 */
|
||||||
|
unsigned short res19;
|
||||||
|
unsigned short scll; /* 0xB4 */
|
||||||
|
unsigned short res20;
|
||||||
|
unsigned short sclh; /* 0xB8 */
|
||||||
|
unsigned short res21;
|
||||||
|
unsigned short systest; /* 0xBC */
|
||||||
|
unsigned short res22;
|
||||||
|
unsigned short bufstat; /* 0xC0 */
|
||||||
|
unsigned short res23;
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* _OMAP4_I2C_H_ */
|
|
@ -25,6 +25,8 @@
|
||||||
#include <asm/arch/i2c.h>
|
#include <asm/arch/i2c.h>
|
||||||
#include <asm/io.h>
|
#include <asm/io.h>
|
||||||
|
|
||||||
|
#include "omap24xx_i2c.h"
|
||||||
|
|
||||||
static void wait_for_bb (void);
|
static void wait_for_bb (void);
|
||||||
static u16 wait_for_pin (void);
|
static u16 wait_for_pin (void);
|
||||||
static void flush_fifo(void);
|
static void flush_fifo(void);
|
||||||
|
@ -176,7 +178,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value)
|
||||||
|
|
||||||
status = wait_for_pin ();
|
status = wait_for_pin ();
|
||||||
if (status & I2C_STAT_RRDY) {
|
if (status & I2C_STAT_RRDY) {
|
||||||
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
|
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
|
||||||
|
defined(CONFIG_OMAP44XX)
|
||||||
*value = readb (&i2c_base->data);
|
*value = readb (&i2c_base->data);
|
||||||
#else
|
#else
|
||||||
*value = readw (&i2c_base->data);
|
*value = readw (&i2c_base->data);
|
||||||
|
@ -221,7 +224,8 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value)
|
||||||
status = wait_for_pin ();
|
status = wait_for_pin ();
|
||||||
|
|
||||||
if (status & I2C_STAT_XRDY) {
|
if (status & I2C_STAT_XRDY) {
|
||||||
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
|
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
|
||||||
|
defined(CONFIG_OMAP44XX)
|
||||||
/* send out 1 byte */
|
/* send out 1 byte */
|
||||||
writeb (regoffset, &i2c_base->data);
|
writeb (regoffset, &i2c_base->data);
|
||||||
writew (I2C_STAT_XRDY, &i2c_base->stat);
|
writew (I2C_STAT_XRDY, &i2c_base->stat);
|
||||||
|
@ -274,7 +278,8 @@ static void flush_fifo(void)
|
||||||
while(1){
|
while(1){
|
||||||
stat = readw(&i2c_base->stat);
|
stat = readw(&i2c_base->stat);
|
||||||
if(stat == I2C_STAT_RRDY){
|
if(stat == I2C_STAT_RRDY){
|
||||||
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX)
|
#if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \
|
||||||
|
defined(CONFIG_OMAP44XX)
|
||||||
readb(&i2c_base->data);
|
readb(&i2c_base->data);
|
||||||
#else
|
#else
|
||||||
readw(&i2c_base->data);
|
readw(&i2c_base->data);
|
||||||
|
@ -435,3 +440,9 @@ int i2c_set_bus_num(unsigned int bus)
|
||||||
|
|
||||||
return 0;
|
return 0;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
int i2c_get_bus_num(void)
|
||||||
|
{
|
||||||
|
return (int) current_bus;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
166
drivers/i2c/omap24xx_i2c.h
Normal file
166
drivers/i2c/omap24xx_i2c.h
Normal file
|
@ -0,0 +1,166 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2004-2010
|
||||||
|
* Texas Instruments, <www.ti.com>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
#ifndef _OMAP24XX_I2C_H_
|
||||||
|
#define _OMAP24XX_I2C_H_
|
||||||
|
|
||||||
|
/* I2C masks */
|
||||||
|
|
||||||
|
/* I2C Interrupt Enable Register (I2C_IE): */
|
||||||
|
#define I2C_IE_GC_IE (1 << 5)
|
||||||
|
#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */
|
||||||
|
#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */
|
||||||
|
#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */
|
||||||
|
#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */
|
||||||
|
#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */
|
||||||
|
|
||||||
|
/* I2C Status Register (I2C_STAT): */
|
||||||
|
|
||||||
|
#define I2C_STAT_SBD (1 << 15) /* Single byte data */
|
||||||
|
#define I2C_STAT_BB (1 << 12) /* Bus busy */
|
||||||
|
#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */
|
||||||
|
#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
|
||||||
|
#define I2C_STAT_AAS (1 << 9) /* Address as slave */
|
||||||
|
#define I2C_STAT_GC (1 << 5)
|
||||||
|
#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
|
||||||
|
#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */
|
||||||
|
#define I2C_STAT_ARDY (1 << 2) /* Register access ready */
|
||||||
|
#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */
|
||||||
|
#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */
|
||||||
|
|
||||||
|
/* I2C Interrupt Code Register (I2C_INTCODE): */
|
||||||
|
|
||||||
|
#define I2C_INTCODE_MASK 7
|
||||||
|
#define I2C_INTCODE_NONE 0
|
||||||
|
#define I2C_INTCODE_AL 1 /* Arbitration lost */
|
||||||
|
#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */
|
||||||
|
#define I2C_INTCODE_ARDY 3 /* Register access ready */
|
||||||
|
#define I2C_INTCODE_RRDY 4 /* Rcv data ready */
|
||||||
|
#define I2C_INTCODE_XRDY 5 /* Xmit data ready */
|
||||||
|
|
||||||
|
/* I2C Buffer Configuration Register (I2C_BUF): */
|
||||||
|
|
||||||
|
#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */
|
||||||
|
#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */
|
||||||
|
|
||||||
|
/* I2C Configuration Register (I2C_CON): */
|
||||||
|
|
||||||
|
#define I2C_CON_EN (1 << 15) /* I2C module enable */
|
||||||
|
#define I2C_CON_BE (1 << 14) /* Big endian mode */
|
||||||
|
#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */
|
||||||
|
#define I2C_CON_MST (1 << 10) /* Master/slave mode */
|
||||||
|
#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */
|
||||||
|
/* (master mode only) */
|
||||||
|
#define I2C_CON_XA (1 << 8) /* Expand address */
|
||||||
|
#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */
|
||||||
|
#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */
|
||||||
|
|
||||||
|
/* I2C System Test Register (I2C_SYSTEST): */
|
||||||
|
|
||||||
|
#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
|
||||||
|
#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */
|
||||||
|
#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
|
||||||
|
#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
|
||||||
|
#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */
|
||||||
|
#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */
|
||||||
|
#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */
|
||||||
|
#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */
|
||||||
|
|
||||||
|
#define I2C_SCLL_SCLL 0
|
||||||
|
#define I2C_SCLL_SCLL_M 0xFF
|
||||||
|
#define I2C_SCLL_HSSCLL 8
|
||||||
|
#define I2C_SCLH_HSSCLL_M 0xFF
|
||||||
|
#define I2C_SCLH_SCLH 0
|
||||||
|
#define I2C_SCLH_SCLH_M 0xFF
|
||||||
|
#define I2C_SCLH_HSSCLH 8
|
||||||
|
#define I2C_SCLH_HSSCLH_M 0xFF
|
||||||
|
|
||||||
|
#define OMAP_I2C_STANDARD 100000
|
||||||
|
#define OMAP_I2C_FAST_MODE 400000
|
||||||
|
#define OMAP_I2C_HIGH_SPEED 3400000
|
||||||
|
|
||||||
|
#define SYSTEM_CLOCK_12 12000000
|
||||||
|
#define SYSTEM_CLOCK_13 13000000
|
||||||
|
#define SYSTEM_CLOCK_192 19200000
|
||||||
|
#define SYSTEM_CLOCK_96 96000000
|
||||||
|
|
||||||
|
/* Use the reference value of 96MHz if not explicitly set by the board */
|
||||||
|
#ifndef I2C_IP_CLK
|
||||||
|
#define I2C_IP_CLK SYSTEM_CLOCK_96
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The reference minimum clock for high speed is 19.2MHz.
|
||||||
|
* The linux 2.6.30 kernel uses this value.
|
||||||
|
* The reference minimum clock for fast mode is 9.6MHz
|
||||||
|
* The reference minimum clock for standard mode is 4MHz
|
||||||
|
* In TRM, the value of 12MHz is used.
|
||||||
|
*/
|
||||||
|
#ifndef I2C_INTERNAL_SAMPLING_CLK
|
||||||
|
#define I2C_INTERNAL_SAMPLING_CLK 19200000
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The equation for the low and high time is
|
||||||
|
* tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed
|
||||||
|
* thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed
|
||||||
|
*
|
||||||
|
* If the duty cycle is 50%
|
||||||
|
*
|
||||||
|
* tlow = scll + scll_trim = sampling clock / (2 * speed)
|
||||||
|
* thigh = sclh + sclh_trim = sampling clock / (2 * speed)
|
||||||
|
*
|
||||||
|
* In TRM
|
||||||
|
* scll_trim = 7
|
||||||
|
* sclh_trim = 5
|
||||||
|
*
|
||||||
|
* The linux 2.6.30 kernel uses
|
||||||
|
* scll_trim = 6
|
||||||
|
* sclh_trim = 6
|
||||||
|
*
|
||||||
|
* These are the trim values for standard and fast speed
|
||||||
|
*/
|
||||||
|
#ifndef I2C_FASTSPEED_SCLL_TRIM
|
||||||
|
#define I2C_FASTSPEED_SCLL_TRIM 6
|
||||||
|
#endif
|
||||||
|
#ifndef I2C_FASTSPEED_SCLH_TRIM
|
||||||
|
#define I2C_FASTSPEED_SCLH_TRIM 6
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* These are the trim values for high speed */
|
||||||
|
#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM
|
||||||
|
#define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
|
||||||
|
#endif
|
||||||
|
#ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM
|
||||||
|
#define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
|
||||||
|
#endif
|
||||||
|
#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM
|
||||||
|
#define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM
|
||||||
|
#endif
|
||||||
|
#ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM
|
||||||
|
#define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define I2C_PSC_MAX 0x0f
|
||||||
|
#define I2C_PSC_MIN 0x00
|
||||||
|
|
||||||
|
#endif /* _OMAP24XX_I2C_H_ */
|
Loading…
Reference in New Issue
Block a user