cros-ec-keyboard: Synchronize DT binding from linux

The ChromeOS EC keyboard is used by various different chromebooks. Peach
pi being the third board in the u-boot tree to use it (snow and peach
pit the other two). Rather then embedding the same big DT node in the
peach-pi DT again, copy the dtsi snippit & bindings documentation from
linux and include it in all 3 boards.

This slightly changes the dt bindings in u-boot:
  * google,key-rows becomes keypad,num-rows
  * google,key-colums becomes keypad,num-colums
  * google,repeat-delay-ms and google,repeat-rate-ms are no longer used
    and replaced by hardcoded values (similar to tegra kbc)

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Sjoerd Simons 2014-11-27 16:34:08 +01:00 committed by Simon Glass
parent ee5ee87642
commit 9332274989
5 changed files with 38 additions and 153 deletions

View File

@ -64,7 +64,7 @@
spi@131b0000 {
spi-max-frequency = <1000000>;
spi-deactivate-delay = <100>;
cros-ec@0 {
cros_ec: cros-ec@0 {
reg = <0>;
compatible = "google,cros-ec";
spi-max-frequency = <5000000>;
@ -151,61 +151,6 @@
samsung,dc-value = <25>;
};
cros-ec-keyb {
compatible = "google,cros-ec-keyb";
google,key-rows = <8>;
google,key-columns = <13>;
google,repeat-delay-ms = <240>;
google,repeat-rate-ms = <30>;
google,ghost-filter;
/*
* Keymap entries take the form of 0xRRCCKKKK where
* RR=Row CC=Column KKKK=Key Code
* The values below are for a US keyboard layout and
* are taken from the Linux driver. Note that the
* 102ND key is not used for US keyboards.
*/
linux,keymap = <
/* CAPSLCK F1 B F10 */
0x0001003a 0x0002003b 0x00030030 0x00040044
/* N = R_ALT ESC */
0x00060031 0x0008000d 0x000a0064 0x01010001
/* F4 G F7 H */
0x0102003e 0x01030022 0x01040041 0x01060023
/* ' F9 BKSPACE L_CTRL */
0x01080028 0x01090043 0x010b000e 0x0200001d
/* TAB F3 T F6 */
0x0201000f 0x0202003d 0x02030014 0x02040040
/* ] Y 102ND [ */
0x0205001b 0x02060015 0x02070056 0x0208001a
/* F8 GRAVE F2 5 */
0x02090042 0x03010029 0x0302003c 0x03030006
/* F5 6 - \ */
0x0304003f 0x03060007 0x0308000c 0x030b002b
/* R_CTRL A D F */
0x04000061 0x0401001e 0x04020020 0x04030021
/* S K J ; */
0x0404001f 0x04050025 0x04060024 0x04080027
/* L ENTER Z C */
0x04090026 0x040b001c 0x0501002c 0x0502002e
/* V X , M */
0x0503002f 0x0504002d 0x05050033 0x05060032
/* L_SHIFT / . SPACE */
0x0507002a 0x05080035 0x05090034 0x050B0039
/* 1 3 4 2 */
0x06010002 0x06020004 0x06030005 0x06040003
/* 8 7 0 9 */
0x06050009 0x06060008 0x0608000b 0x0609000a
/* L_ALT DOWN RIGHT Q */
0x060a0038 0x060b006c 0x060c006a 0x07010010
/* E R W I */
0x07020012 0x07030013 0x07040011 0x07050017
/* U R_SHIFT P O */
0x07060016 0x07070036 0x07080019 0x07090018
/* UP LEFT */
0x070b0067 0x070c0069>;
};
fimd@14400000 {
samsung,vl-freq = <60>;
samsung,vl-col = <1366>;
@ -250,3 +195,5 @@
};
};
#include "cros-ec-keyboard.dtsi"

View File

@ -28,61 +28,6 @@
pmic = "/i2c@12ca0000";
};
cros-ec-keyb {
compatible = "google,cros-ec-keyb";
google,key-rows = <8>;
google,key-columns = <13>;
google,repeat-delay-ms = <240>;
google,repeat-rate-ms = <30>;
google,ghost-filter;
/*
* Keymap entries take the form of 0xRRCCKKKK where
* RR=Row CC=Column KKKK=Key Code
* The values below are for a US keyboard layout and
* are taken from the Linux driver. Note that the
* 102ND key is not used for US keyboards.
*/
linux,keymap = <
/* CAPSLCK F1 B F10 */
0x0001003a 0x0002003b 0x00030030 0x00040044
/* N = R_ALT ESC */
0x00060031 0x0008000d 0x000a0064 0x01010001
/* F4 G F7 H */
0x0102003e 0x01030022 0x01040041 0x01060023
/* ' F9 BKSPACE L_CTRL */
0x01080028 0x01090043 0x010b000e 0x0200001d
/* TAB F3 T F6 */
0x0201000f 0x0202003d 0x02030014 0x02040040
/* ] Y 102ND [ */
0x0205001b 0x02060015 0x02070056 0x0208001a
/* F8 GRAVE F2 5 */
0x02090042 0x03010029 0x0302003c 0x03030006
/* F5 6 - \ */
0x0304003f 0x03060007 0x0308000c 0x030b002b
/* R_CTRL A D F */
0x04000061 0x0401001e 0x04020020 0x04030021
/* S K J ; */
0x0404001f 0x04050025 0x04060024 0x04080027
/* L ENTER Z C */
0x04090026 0x040b001c 0x0501002c 0x0502002e
/* V X , M */
0x0503002f 0x0504002d 0x05050033 0x05060032
/* L_SHIFT / . SPACE */
0x0507002a 0x05080035 0x05090034 0x050B0039
/* 1 3 4 2 */
0x06010002 0x06020004 0x06030005 0x06040003
/* 8 7 0 9 */
0x06050009 0x06060008 0x0608000b 0x0609000a
/* L_ALT DOWN RIGHT Q */
0x060a0038 0x060b006c 0x060c006a 0x07010010
/* E R W I */
0x07020012 0x07030013 0x07040011 0x07050017
/* U R_SHIFT P O */
0x07060016 0x07070036 0x07080019 0x07090018
/* UP LEFT */
0x070b0067 0x070c0069>;
};
dmc {
mem-manuf = "samsung";
mem-type = "ddr3";
@ -157,7 +102,7 @@
spi@12d40000 { /* spi2 */
spi-max-frequency = <4000000>;
spi-deactivate-delay = <200>;
cros-ec@0 {
cros_ec: cros-ec@0 {
reg = <0>;
compatible = "google,cros-ec";
spi-half-duplex;
@ -211,3 +156,5 @@
samsung,dual-lcd-enabled = <0>;
};
};
#include "cros-ec-keyboard.dtsi"

View File

@ -96,7 +96,7 @@
spi@12d40000 { /* spi2 */
spi-max-frequency = <4000000>;
spi-deactivate-delay = <200>;
cros-ec@0 {
cros_ec: cros-ec@0 {
reg = <0>;
compatible = "google,cros-ec";
spi-half-duplex;
@ -150,3 +150,5 @@
samsung,dual-lcd-enabled = <0>;
};
};
#include "cros-ec-keyboard.dtsi"

View File

@ -1,45 +1,38 @@
CROS_EC Keyboard
ChromeOS EC Keyboard
The CROS_EC (Matrix Keyboard Protocol) allows communcation with a secondary
micro used for keyboard, and possible other features.
Google's ChromeOS EC Keyboard is a simple matrix keyboard implemented on
a separate EC (Embedded Controller) device. It provides a message for reading
key scans from the EC. These are then converted into keycodes for processing
by the kernel.
The CROS_EC keyboard uses this protocol to receive key scans and produce input
in U-Boot.
This binding is based on matrix-keymap.txt and extends/modifies it as follows:
Required properties :
- compatible : "google,cros-ec-keyb"
- google,key-rows : Number of key rows
- google,key-columns : Number of key columns
Required properties:
- compatible: "google,cros-ec-keyb"
Optional properties, in addition to those specified by the shared
matrix-keyboard bindings:
Optional properties:
- google,needs-ghost-filter: True to enable a ghost filter for the matrix
keyboard. This is recommended if the EC does not have its own logic or
hardware for this.
- linux,fn-keymap: a second keymap, same specification as the
matrix-keyboard-controller spec but to be used when the KEY_FN modifier
key is pressed.
- google,repeat-delay-ms : delay in milliseconds before repeat starts
- google,repeat-rate-ms : delay between each subsequent key press
- google,ghost-filter : enable ghost filtering for this device
Example, taken from daisy:
Example:
cros-ec-keyb {
compatible = "google,cros-ec-keyb";
google,key-rows = <8>;
google,key-columns = <13>;
google,ghost-filter;
google,repeat-delay-ms = <240>;
google,repeat-rate-ms = <30>;
keypad,num-rows = <8>;
keypad,num-columns = <13>;
google,needs-ghost-filter;
/*
* Keymap entries take the form of 0xRRCCKKKK where
* RR=Row CC=Column KKKK=Key Code
* The values below are for a US keyboard layout and
* are taken from the Linux driver. Note that the
* 102ND key is not used for US keyboards.
*/
* Keymap entries take the form of 0xRRCCKKKK where
* RR=Row CC=Column KKKK=Key Code
* The values below are for a US keyboard layout and
* are taken from the Linux driver. Note that the
* 102ND key is not used for US keyboards.
*/
linux,keymap = <
/* CAPSLCK F1 B F10 */
0x0001003a 0x0002003c 0x00030030 0x00040044
0x0001003a 0x0002003b 0x00030030 0x00040044
/* N = R_ALT ESC */
0x00060031 0x0008000d 0x000a0064 0x01010001
/* F4 G F7 H */

View File

@ -18,6 +18,8 @@ DECLARE_GLOBAL_DATA_PTR;
enum {
KBC_MAX_KEYS = 8, /* Maximum keys held down at once */
KBC_REPEAT_RATE_MS = 30,
KBC_REPEAT_DELAY_MS = 240,
};
static struct keyb {
@ -26,8 +28,6 @@ static struct keyb {
struct key_matrix matrix; /* The key matrix layer */
int key_rows; /* Number of keyboard rows */
int key_cols; /* Number of keyboard columns */
unsigned int repeat_delay_ms; /* Time before autorepeat starts */
unsigned int repeat_rate_ms; /* Autorepeat rate in ms */
int ghost_filter; /* 1 to enable ghost filter, else 0 */
int inited; /* 1 if keyboard is ready */
} config;
@ -188,8 +188,8 @@ static int cros_ec_keyb_decode_fdt(const void *blob, int node,
* Get keyboard rows and columns - at present we are limited to
* 8 columns by the protocol (one byte per row scan)
*/
config->key_rows = fdtdec_get_int(blob, node, "google,key-rows", 0);
config->key_cols = fdtdec_get_int(blob, node, "google,key-columns", 0);
config->key_rows = fdtdec_get_int(blob, node, "keypad,num-rows", 0);
config->key_cols = fdtdec_get_int(blob, node, "keypad,num-columns", 0);
if (!config->key_rows || !config->key_cols ||
config->key_rows * config->key_cols / 8
> CROS_EC_KEYSCAN_COLS) {
@ -197,10 +197,6 @@ static int cros_ec_keyb_decode_fdt(const void *blob, int node,
config->key_rows, config->key_cols);
return -1;
}
config->repeat_delay_ms = fdtdec_get_int(blob, node,
"google,repeat-delay-ms", 0);
config->repeat_rate_ms = fdtdec_get_int(blob, node,
"google,repeat-rate-ms", 0);
config->ghost_filter = fdtdec_get_bool(blob, node,
"google,ghost-filter");
return 0;
@ -232,8 +228,8 @@ static int cros_ec_init_keyboard(struct stdio_dev *dev)
}
if (cros_ec_keyb_decode_fdt(blob, node, &config))
return -1;
input_set_delays(&config.input, config.repeat_delay_ms,
config.repeat_rate_ms);
input_set_delays(&config.input, KBC_REPEAT_DELAY_MS,
KBC_REPEAT_RATE_MS);
if (key_matrix_init(&config.matrix, config.key_rows,
config.key_cols, config.ghost_filter)) {
debug("%s: cannot init key matrix\n", __func__);