From 96e1d75be8193ca79e4215a368bf9d7f2362450f Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Wed, 11 Jul 2007 18:39:11 +0200 Subject: [PATCH 1/7] [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed - now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher --- Makefile | 2 +- board/pcs440ep/flash.c | 11 ++++++++ board/pcs440ep/pcs440ep.c | 37 +++++++++++++++++++------ doc/README.sha1 | 57 ++++++++++++++++++++++++++++++++++++++ include/configs/pcs440ep.h | 8 +++--- 5 files changed, 101 insertions(+), 14 deletions(-) create mode 100644 doc/README.sha1 diff --git a/Makefile b/Makefile index 47e4e670ab..c45700e08d 100644 --- a/Makefile +++ b/Makefile @@ -268,7 +268,7 @@ $(obj)u-boot.img: $(obj)u-boot.bin -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin - ./tools/ubsha1 $(obj)u-boot.bin + $(obj)./tools/ubsha1 $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ diff --git a/board/pcs440ep/flash.c b/board/pcs440ep/flash.c index 70014407c6..c5a62e2543 100644 --- a/board/pcs440ep/flash.c +++ b/board/pcs440ep/flash.c @@ -82,6 +82,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("ST Micro"); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; case FLASH_MAN_MX: printf ("MXIC "); break; default: printf ("Unknown Vendor "); break; @@ -118,6 +119,8 @@ void flash_print_info(flash_info_t *info) break; case FLASH_SST040: printf ("SST39LF/VF040 (4 Mbit, uniform sector size)\n"); break; + case STM_ID_M29W040B: printf ("ST Micro M29W040B (4 Mbit, uniform sector size)\n"); + break; default: printf ("Unknown Chip Type\n"); break; } @@ -193,6 +196,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: info->flash_id = FLASH_MAN_SST; break; + case (CFG_FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; @@ -226,6 +232,11 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) info->sector_count = 8; info->size = 0x0080000; /* => 0.5 MB */ break; + case (CFG_FLASH_WORD_SIZE)STM_ID_M29W040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x0080000; /* => 0,5 MB */ + break; case (CFG_FLASH_WORD_SIZE)AMD_ID_LV800T: info->flash_id += FLASH_AM800T; diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index ada6b82c92..0e34a76cb9 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -85,8 +85,9 @@ static void status_led_blink (void) /* set all LED which are on, to state BLINKING */ for (i = 0; i < 4; i++) { - if (val & 0x08) status_led_set (i, STATUS_LED_BLINKING); - val = val << 1; + if (val & 0x01) status_led_set (3 - i, STATUS_LED_BLINKING); + else status_led_set (3 - i, STATUS_LED_OFF); + val = val >> 1; } } @@ -113,12 +114,14 @@ void show_boot_progress (int val) status_led_set (1, STATUS_LED_ON); status_led_set (2, STATUS_LED_ON); break; +#if 0 case 64: /* starting Ethernet configuration */ status_led_set (0, STATUS_LED_OFF); status_led_set (1, STATUS_LED_OFF); status_led_set (2, STATUS_LED_ON); break; +#endif case 80: /* loading Image */ status_led_set (0, STATUS_LED_ON); @@ -404,6 +407,9 @@ static void pcs440ep_checksha1 (void) int ret; char *cs_test; + status_led_set (0, STATUS_LED_OFF); + status_led_set (1, STATUS_LED_OFF); + status_led_set (2, STATUS_LED_ON); ret = pcs440ep_sha1 (1); if (ret == 0) return; @@ -751,28 +757,41 @@ void hw_watchdog_reset(void) ************************************************************************/ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - int rcode = 0; + int rcode = 0, i; ulong pattern = 0; - pattern = simple_strtoul (argv[1], NULL, 10); - if (pattern > 200) { + pattern = simple_strtoul (argv[1], NULL, 16); + if (pattern > 0x400) { + int val = GET_LEDS; + printf ("led: %x\n", val); + return rcode; + } + if (pattern > 0x200) { status_led_blink (); hang (); return rcode; } - if (pattern > 100) { + if (pattern > 0x100) { status_led_blink (); return rcode; } pattern &= 0x0f; - set_leds (pattern); + for (i = 0; i < 4; i++) { + if (pattern & 0x01) status_led_set (i, STATUS_LED_ON); + else status_led_set (i, STATUS_LED_OFF); + pattern = pattern >> 1; + } return rcode; } U_BOOT_CMD( led, 2, 1, do_led, - "led - set the led\n", - NULL + "led [bitmask] - set the DIAG-LED\n", + "[bitmask] 0x01 = DIAG 1 on\n" + " 0x02 = DIAG 2 on\n" + " 0x04 = DIAG 3 on\n" + " 0x08 = DIAG 4 on\n" + " > 0x100 set the LED, who are on, to state blinking\n" ); #if defined(CONFIG_SHA1_CHECK_UB_IMG) diff --git a/doc/README.sha1 b/doc/README.sha1 new file mode 100644 index 0000000000..92dc8fffae --- /dev/null +++ b/doc/README.sha1 @@ -0,0 +1,57 @@ +SHA1 usage: +----------- + +In the U-Boot Image for the pcs440ep board is a SHA1 checksum integrated. +This SHA1 sum is used, to check, if the U-Boot Image in Flash is not +corrupted. + +The following command is available: + +=> help sha1 +sha1 address len [addr] calculate the SHA1 sum [save at addr] + -p calculate the SHA1 sum from the U-Boot image in flash and print + -c check the U-Boot image in flash + +"sha1 -p" + calculates and prints the SHA1 sum, from the Image stored in Flash + +"sha1 -c" + check, if the SHA1 sum from the Image stored in Flash is correct + + +It is possible to calculate a SHA1 checksum from a memoryrange with: + +"sha1 address len" + +If you want to store a new Image in Flash for the pcs440ep board, +which has no SHA1 sum, you can do the following: + +a) cp the new Image on a position in RAM (here 0x300000) + (for this example we use the Image from Flash, stored at 0xfffa0000 and + 0x60000 Bytes long) + +"cp.b fffa0000 300000 60000" + +b) Initialize the SHA1 sum in the Image with 0x00 + The SHA1 sum is stored in Flash at: + CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS + for the pcs440ep Flash: 0xfffa0000 + 0x60000 + -0x20 + = 0xffffffe0 + for the example in RAM: 0x300000 + 0x60000 + -0x20 + = 0x35ffe0 + + note: a SHA1 checksum is 20 bytes long. + +"mw.b 35ffe0 0 14" + +c) now calculate the SHA1 sum from the memoryrange and write + the calculated checksum at the right place: + +"sha1 300000 60000 35ffe0" + +Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum. + +If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image, +the correct SHA1 sum will be automagically included in the U-Boot image. + +Heiko Schocher, 11 Jul 2007 diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h index 69d97d66ea..5ee97c1279 100644 --- a/include/configs/pcs440ep.h +++ b/include/configs/pcs440ep.h @@ -197,16 +197,16 @@ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1 -#define STATUS_LED_BIT 0x08 /* LED 1 is on GPIO_PPC_1 */ +#define STATUS_LED_BIT 0x08 /* DIAG1 is on GPIO_PPC_1 */ #define STATUS_LED_PERIOD ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE STATUS_LED_OFF -#define STATUS_LED_BIT1 0x04 /* LED 2 is on GPIO_PPC_2 */ +#define STATUS_LED_BIT1 0x04 /* DIAG2 is on GPIO_PPC_2 */ #define STATUS_LED_PERIOD1 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE1 STATUS_LED_ON -#define STATUS_LED_BIT2 0x02 /* LED 3 is on GPIO_PPC_3 */ +#define STATUS_LED_BIT2 0x02 /* DIAG3 is on GPIO_PPC_3 */ #define STATUS_LED_PERIOD2 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE2 STATUS_LED_OFF -#define STATUS_LED_BIT3 0x01 /* LED 4 is on GPIO_PPC_4 */ +#define STATUS_LED_BIT3 0x01 /* DIAG4 is on GPIO_PPC_4 */ #define STATUS_LED_PERIOD3 ((CFG_HZ / 2) / 5) /* blink at 5 Hz */ #define STATUS_LED_STATE3 STATUS_LED_OFF From fa1df308926a6f70e3504c57514ef27ac31fd13a Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Wed, 11 Jul 2007 20:11:07 +0200 Subject: [PATCH 2/7] CM1.QP1: Support for the Schindler CM1.QP1 board. Signed-off-by: Piotr Kruszynski Signed-off-by: Bartlomiej Sieka --- MAKEALL | 12 +- Makefile | 8 + board/cm1_qp1/Makefile | 50 ++++ board/cm1_qp1/cm1_qp1.c | 222 ++++++++++++++++++ board/cm1_qp1/cmd_cm1_qp1.c | 446 ++++++++++++++++++++++++++++++++++++ board/cm1_qp1/config.mk | 26 +++ board/cm1_qp1/fwupdate.c | 187 +++++++++++++++ board/cm1_qp1/fwupdate.h | 47 ++++ board/cm1_qp1/u-boot.lds | 123 ++++++++++ cpu/mpc5xxx/fec.c | 21 +- include/configs/cm1_qp1.h | 358 +++++++++++++++++++++++++++++ 11 files changed, 1487 insertions(+), 13 deletions(-) create mode 100644 board/cm1_qp1/Makefile create mode 100644 board/cm1_qp1/cm1_qp1.c create mode 100644 board/cm1_qp1/cmd_cm1_qp1.c create mode 100644 board/cm1_qp1/config.mk create mode 100644 board/cm1_qp1/fwupdate.c create mode 100644 board/cm1_qp1/fwupdate.h create mode 100644 board/cm1_qp1/u-boot.lds create mode 100644 include/configs/cm1_qp1.h diff --git a/MAKEALL b/MAKEALL index f931e1dd71..127faa83a3 100755 --- a/MAKEALL +++ b/MAKEALL @@ -35,12 +35,12 @@ LIST_5xx=" \ ######################################################################### LIST_5xxx=" \ - BC3450 cpci5200 EVAL5200 fo300 \ - icecube_5100 icecube_5200 lite5200b mcc200 \ - mecp5200 motionpro o2dnt pf5200 \ - PM520 TB5200 Total5100 Total5200 \ - Total5200_Rev2 TQM5200 TQM5200_B TQM5200S \ - v38b \ + BC3450 cm1_qp1 cpci5200 EVAL5200 \ + fo300 icecube_5100 icecube_5200 lite5200b \ + mcc200 mecp5200 motionpro o2dnt \ + pf5200 PM520 TB5200 Total5100 \ + Total5200 Total5200_Rev2 TQM5200 TQM5200_B \ + TQM5200S v38b \ " ######################################################################### diff --git a/Makefile b/Makefile index 626283f708..9c1a0b2a37 100644 --- a/Makefile +++ b/Makefile @@ -529,6 +529,14 @@ PM520_ROMBOOT_DDR_config: unconfig smmaco4_config: unconfig @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200 +cm1_qp1_config: unconfig + @ >include/config.h + @[ -z "$(findstring cm1_qp1,$@)" ] || \ + { echo "... with 64 MByte SDRAM" ; \ + echo "... with 32 MByte Flash" ; \ + } + @./mkconfig -a cm1_qp1 ppc mpc5xxx cm1_qp1 + spieval_config: unconfig @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200 diff --git a/board/cm1_qp1/Makefile b/board/cm1_qp1/Makefile new file mode 100644 index 0000000000..e7393267e7 --- /dev/null +++ b/board/cm1_qp1/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o cmd_cm1_qp1.o fwupdate.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/cm1_qp1/cm1_qp1.c b/board/cm1_qp1/cm1_qp1.c new file mode 100644 index 0000000000..b49298f64b --- /dev/null +++ b/board/cm1_qp1/cm1_qp1.c @@ -0,0 +1,222 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#ifdef CONFIG_OF_FLAT_TREE +#include +#endif /* CONFIG_OF_FLAT_TREE */ + +#include "fwupdate.h" + +#ifndef CFG_RAMBOOT +/* + * Helper function to initialize SDRAM controller. + */ +static void sdram_start(int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | + hi_addr_bit; + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + + /* auto refresh, second time */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; +} +#endif /* CFG_RAMBOOT */ + +/* + * Initalize SDRAM - configure SDRAM controller, detect memory size. + */ +long int initdram(int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* configure SDRAM start/end for detection */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + + sdram_start(0); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else + dramsize = test2; + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ +#else /* CFG_RAMBOOT */ + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; +#endif /* CFG_RAMBOOT */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of + * the MPC5200B User's Manual. + */ + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + + return dramsize; +} + + +int checkboard(void) +{ + puts("Board: CM1.QP1\n"); + return 0; +} + + +int board_early_init_r(void) +{ + /* + * Now, when we are in RAM, enable flash write access for detection + * process. Note that CS_BOOT cannot be cleared when executing in + * flash. + */ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + return 0; +} + + +#ifdef CONFIG_POST +int post_hotkeys_pressed(void) +{ + return 0; +} +#endif /* CONFIG_POST */ + + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) +void post_word_store(ulong a) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + *save_addr = a; +} + + +ulong post_word_load(void) +{ + vu_long *save_addr = (vu_long *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + return *save_addr; +} +#endif /* CONFIG_POST || CONFIG_LOGBUFFER */ + + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + uchar buf[6]; + char str[18]; + + /* Read ethaddr from EEPROM */ + if (i2c_read(CFG_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { + sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", + buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); + /* Check if MAC addr is owned by Schindler */ + if (strstr(str, "00:06:C3") != str) { + printf(LOG_PREFIX "Warning - Illegal MAC address (%s)" + " in EEPROM.\n", str); + printf(LOG_PREFIX "Using MAC from environment\n"); + } else { + printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n", + str); + setenv("ethaddr", str); + } + } else { + printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" + " device at address %02X:%04X\n", CFG_I2C_EEPROM, + CONFIG_MAC_OFFSET); + printf(LOG_PREFIX "Using MAC from environment\n"); + } + return 0; +#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */ +} +#endif /* CONFIG_MISC_INIT_R */ + + +#ifdef CONFIG_LAST_STAGE_INIT +int last_stage_init(void) +{ +#ifdef CONFIG_USB_STORAGE + cm1_fwupdate(); +#endif /* CONFIG_USB_STORAGE */ + return 0; +} +#endif /* CONFIG_LAST_STAGE_INIT */ + + +#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/cm1_qp1/cmd_cm1_qp1.c b/board/cm1_qp1/cmd_cm1_qp1.c new file mode 100644 index 0000000000..4a01d2a7f4 --- /dev/null +++ b/board/cm1_qp1/cmd_cm1_qp1.c @@ -0,0 +1,446 @@ +/* + * (C) Copyright 2007 Markus Kappeler + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#if (CONFIG_COMMANDS & CFG_CMD_BSP) + +int do_i2c(char *argv[]) +{ + unsigned char temp, temp1; + + printf("Starting I2C Test\n" + "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n" + "Please press any key to start\n\n"); + getc(); + + temp = 0xf0; /* set io 0-4 as output */ + i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1); + + printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n" + "Press any key to stop\n\n"); + + while (!tstc()) { + i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1); + temp1 = (temp >> 4) & 0x03; + temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */ + temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */ + temp = temp1; + i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1); + } + getc(); + + return 0; +} + +int do_usbtest(char *argv[]) +{ + int i; + static int usb_stor_curr_dev = -1; /* current device */ + + printf("Starting USB Test\n" + "Please insert USB Memmory Stick\n\n" + "Please press any key to start\n\n"); + getc(); + + usb_stop(); + printf("(Re)start USB...\n"); + i = usb_init(); +#ifdef CONFIG_USB_STORAGE + /* try to recognize storage devices immediately */ + if (i >= 0) + usb_stor_curr_dev = usb_stor_scan(1); +#endif /* CONFIG_USB_STORAGE */ + if (usb_stor_curr_dev >= 0) + printf("Found USB Storage Dev continue with Test...\n"); + else { + printf("No USB Storage Device detected.. Stop Test\n"); + return 1; + } + + usb_stor_info(); + + printf("stopping USB..\n"); + usb_stop(); + + return 0; +} + +int do_led(char *argv[]) +{ + int i = 0; + struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; + + printf("Starting LED Test\n" + "Please set Switch S500 all off\n\n" + "Please press any key to start\n\n"); + getc(); + + /* configure timer 2-3 for simple GPIO output High */ + gpt->gpt2.emsr |= 0x00000034; + gpt->gpt3.emsr |= 0x00000034; + + (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000; + (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000; + printf("Please press any key to stop\n\n"); + while (!tstc()) { + if (i == 1) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; + gpt->gpt2.emsr &= ~0x00000010; + gpt->gpt3.emsr &= ~0x00000010; + } else if (i == 2) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; + gpt->gpt2.emsr &= ~0x00000010; + gpt->gpt3.emsr |= 0x00000010; + } else if (i >= 3) { + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; + gpt->gpt3.emsr &= ~0x00000010; + gpt->gpt2.emsr |= 0x00000010; + i = 0; + } + i++; + udelay(200000); + } + getc(); + + (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; + gpt->gpt2.emsr |= 0x00000010; + gpt->gpt3.emsr |= 0x00000010; + + return 0; +} + +int do_rs232(char *argv[]) +{ + int error_status = 0; + struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; + + /* Configure PSC 2-3-6 as GPIO */ + gpio->port_config &= 0xFF0FF80F; + + switch (simple_strtoul(argv[2], NULL, 10)) { + case 1: + /* check RTS <-> CTS loop */ + /* set rts to 0 */ + printf("Uart 1 test: RX TX tested by using U-Boot\n" + "Please connect RTS with CTS on Uart1 plug\n\n" + "Press any key to start\n\n"); + getc(); + + psc1->op1 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 0) { + error_status = 3; + printf("%s: failure at rs232_1, cts status is %d " + "(should be 0)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + + /* set rts to 1 */ + psc1->op0 |= 0x01; + + /* wait some time before requesting status */ + udelay(10); + + /* check status at cts */ + if ((psc1->ip & 0x01) != 1) { + error_status = 3; + printf("%s: failure at rs232_1, cts status is %d " + "(should be 1)\n", + __FUNCTION__, (psc1->ip & 0x01)); + } + break; + case 2: + /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */ + printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0x000000F0); + gpio->simple_gpioe |= 0x000000F0; + gpio->simple_ddr &= ~(0x000000F0); + gpio->simple_ddr |= 0x00000050; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 4); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000020) != 0x00000020) { + error_status = 2; + printf("%s: failure at rs232_2, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000020) >> 5); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 4); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000020) != 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_2, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000020) >> 5); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 6); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000080) != 0x00000080) { + error_status = 3; + printf("%s: failure at rs232_2, cts status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000080) >> 7); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 6); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000080) != 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_2, cts status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000080) >> 7); + } + break; + case 3: + /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ + printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0x00000F00); + gpio->simple_gpioe |= 0x00000F00; + + gpio->simple_ddr &= ~(0x00000F00); + gpio->simple_ddr |= 0x00000500; + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000200) { + error_status = 2; + printf("%s: failure at rs232_3, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 8); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000200) != 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_3, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000200) >> 9); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000800) { + error_status = 3; + printf("%s: failure at rs232_3, cts status is %d " + "(should be 1)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 10); + + /* wait some time before requesting status */ + udelay(10); + + if ((gpio->simple_ival & 0x00000800) != 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_3, cts status is %d " + "(should be 0)\n", __FUNCTION__, + (gpio->simple_ival & 0x00000800) >> 11); + } + break; + case 4: + /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */ + printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n" + "\nPress any key to start\n\n"); + getc(); + + gpio->simple_gpioe &= ~(0xF0000000); + gpio->simple_gpioe |= 0x30000000; + + gpio->simple_ddr &= ~(0xf0000000); + gpio->simple_ddr |= 0x30000000; + + (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000; + (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000); + + /* check TXD <-> RXD loop */ + /* set TXD to 1 */ + gpio->simple_dvo |= (1 << 28); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != + 0x10000000) { + error_status = 2; + printf("%s: failure at rs232_4, rxd status is %d " + "(should be 1)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x10000000) >> 28); + } + + /* set TXD to 0 */ + gpio->simple_dvo &= ~(1 << 28); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != + 0x00000000) { + error_status = 2; + printf("%s: failure at rs232_4, rxd status is %d " + "(should be 0)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x10000000) >> 28); + } + + /* check RTS <-> CTS loop */ + /* set RTS to 1 */ + gpio->simple_dvo |= (1 << 29); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != + 0x20000000) { + error_status = 3; + printf("%s: failure at rs232_4, cts status is %d " + "(should be 1)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x20000000) >> 29); + } + + /* set RTS to 0 */ + gpio->simple_dvo &= ~(1 << 29); + + /* wait some time before requesting status */ + udelay(10); + + if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != + 0x00000000) { + error_status = 3; + printf("%s: failure at rs232_4, cts status is %d " + "(should be 0)\n", __FUNCTION__, + ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & + 0x20000000) >> 29); + } + break; + default: + printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); + error_status = 1; + break; + } + gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F); + + return error_status; +} + +int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int rcode = -1; + + switch (argc) { + case 2: + if (strncmp(argv[1], "i2c", 3) == 0) + rcode = do_i2c(argv); + else if (strncmp(argv[1], "led", 3) == 0) + rcode = do_led(argv); + else if (strncmp(argv[1], "usb", 3) == 0) + rcode = do_usbtest(argv); + break; + case 3: + if (strncmp(argv[1], "rs232", 3) == 0) + rcode = do_rs232(argv); + break; + } + + switch (rcode) { + case -1: + printf("Usage:\n" + "fkt { i2c | led | usb }\n" + "fkt rs232 number\n"); + rcode = 1; + break; + case 0: + printf("Test passed\n"); + break; + default: + printf("Test failed with code: %d\n", rcode); + } + + return rcode; +} + +U_BOOT_CMD( + fkt, 4, 1, cmd_fkt, + "fkt - Function test routines\n", + "i2c\n" + " - Test I2C communication\n" + "fkt led\n" + " - Test LEDs\n" + "fkt rs232 number\n" + " - Test RS232 (loopback plug(s) for RS232 required)\n" + "fkt usb\n" + " - Test USB communication\n" +); +#endif /* CFG_CMD_BSP */ diff --git a/board/cm1_qp1/config.mk b/board/cm1_qp1/config.mk new file mode 100644 index 0000000000..7f061391a2 --- /dev/null +++ b/board/cm1_qp1/config.mk @@ -0,0 +1,26 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xfc000000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/cm1_qp1/fwupdate.c b/board/cm1_qp1/fwupdate.c new file mode 100644 index 0000000000..637375e598 --- /dev/null +++ b/board/cm1_qp1/fwupdate.c @@ -0,0 +1,187 @@ +/* + * (C) Copyright 2007 Schindler Lift Inc. + * (C) Copyright 2007 Semihalf + * + * Author: Michel Marti + * Adapted for U-Boot 1.2 by Piotr Kruszynski : + * - code clean-up + * - bugfix for overwriting bootargs by user + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include "fwupdate.h" + +extern int do_bootm(cmd_tbl_t *, int, int, char *[]); +extern long do_fat_read(const char *, void *, unsigned long, int); +extern int do_fat_fsload(cmd_tbl_t *, int, int, char *[]); + +static int load_rescue_image(ulong); + +void cm1_fwupdate(void) +{ + cmd_tbl_t *bcmd; + char *rsargs; + char *tmp = NULL; + char ka[16]; + char *argv[3] = { "bootm", ka, NULL }; + + /* Check if rescue system is disabled... */ + if (getenv("norescue")) { + printf(LOG_PREFIX "Rescue System disabled.\n"); + return; + } + + /* Check if we have a USB storage device and load image */ + if (load_rescue_image(LOAD_ADDR)) + return; + + bcmd = find_cmd("bootm"); + if (!bcmd) + return; + + sprintf(ka, "%lx", LOAD_ADDR); + + /* prepare our bootargs */ + rsargs = getenv("rs-args"); + if (!rsargs) + rsargs = RS_BOOTARGS; + else { + tmp = malloc(strlen(rsargs+1)); + if (!tmp) { + printf(LOG_PREFIX "Memory allocation failed\n"); + return; + } + strcpy(tmp, rsargs); + rsargs = tmp; + } + + setenv("bootargs", rsargs); + + if (rsargs == tmp) + free(rsargs); + + printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs); + do_bootm(bcmd, 0, 2, argv); +} + +static int load_rescue_image(ulong addr) +{ + disk_partition_t info; + int devno; + int partno; + int i; + char fwdir[64]; + char nxri[128]; + char *tmp; + char dev[7]; + char addr_str[16]; + char *argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL }; + block_dev_desc_t *stor_dev = NULL; + cmd_tbl_t *bcmd; + + /* Get name of firmware directory */ + tmp = getenv("fw-dir"); + + /* Copy it into fwdir */ + strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir)); + fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */ + + printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB" + " storage...\n", fwdir); + usb_stop(); + if (usb_init() != 0) + return 1; + + /* Check for storage device */ + if (usb_stor_scan(1) != 0) { + usb_stop(); + return 1; + } + + /* Detect storage device */ + for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) { + stor_dev = usb_stor_get_dev(devno); + if (stor_dev->type != DEV_TYPE_UNKNOWN) + break; + } + if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) { + printf(LOG_PREFIX "No valid storage device found...\n"); + usb_stop(); + return 1; + } + + /* Detect partition */ + for (partno = -1, i = 0; i < 6; i++) { + if (get_partition_info(stor_dev, i, &info) == 0) { + if (fat_register_device(stor_dev, i) == 0) { + /* Check if rescue image is present */ + FW_DEBUG("Looking for firmware directory '%s'" + " on partition %d\n", fwdir, i); + if (do_fat_read(fwdir, NULL, 0, LS_NO) == -1) { + FW_DEBUG("No NX rescue image on " + "partition %d.\n", i); + } else { + partno = i; + FW_DEBUG("Partition %d contains " + "firmware directory\n", partno); + break; + } + } + } + } + + if (partno == -1) { + printf(LOG_PREFIX "Error: No valid (FAT) partition detected\n"); + usb_stop(); + return 1; + } + + /* Load the rescue image */ + bcmd = find_cmd("fatload"); + if (!bcmd) { + printf(LOG_PREFIX "Error - 'fatload' command not present.\n"); + usb_stop(); + return 1; + } + + tmp = getenv("nx-rescue-image"); + sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE); + sprintf(dev, "%d:%d", devno, partno); + sprintf(addr_str, "%lx", addr); + + FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n", + dev, addr_str, nxri); + + if (do_fat_fsload(bcmd, 0, 5, argv) != 0) { + usb_stop(); + return 1; + } + + /* Stop USB */ + usb_stop(); + return 0; +} diff --git a/board/cm1_qp1/fwupdate.h b/board/cm1_qp1/fwupdate.h new file mode 100644 index 0000000000..119c2d691c --- /dev/null +++ b/board/cm1_qp1/fwupdate.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2007 Schindler Lift Inc. + * + * Author: Michel Marti + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FW_UPDATE_H +#define __FW_UPDATE_H + +/* Default prefix for output messages */ +#define LOG_PREFIX "CM1: " + +/* Extra debug macro */ +#ifdef CONFIG_FWUPDATE_DEBUG +#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt) +#else +#define FW_DEBUG(fmt...) +#endif + +/* Name of the directory holding firmware images */ +#define FW_DIR "nx-fw" +#define RESCUE_IMAGE "nxrs.img" +#define LOAD_ADDR 0x400000 +#define RS_BOOTARGS "ramdisk=8192K" + +/* Main function for fwupdate */ +void cm1_fwupdate(void); + +#endif /* __FW_UPDATE_H */ diff --git a/board/cm1_qp1/u-boot.lds b/board/cm1_qp1/u-boot.lds new file mode 100644 index 0000000000..8fa9c0f7ed --- /dev/null +++ b/board/cm1_qp1/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc5xxx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 813636655b..3d99d5c1ec 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -889,13 +889,20 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->eth = (ethernet_regs *)MPC5XXX_FEC; fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \ - defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \ - defined(CONFIG_JUPITER) || defined(CONFIG_MCC200) || \ - defined(CONFIG_MOTIONPRO)|| defined(CONFIG_O2DNT) || \ - defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || defined(CONFIG_UC101) || \ - defined(CONFIG_V38B) +#if defined(CONFIG_CANMB) || \ + defined(CONFIG_CM1_QP1) || \ + defined(CONFIG_HMI1001) || \ + defined(CONFIG_ICECUBE) || \ + defined(CONFIG_INKA4X0) || \ + defined(CONFIG_JUPITER) || \ + defined(CONFIG_MCC200) || \ + defined(CONFIG_MOTIONPRO) || \ + defined(CONFIG_O2DNT) || \ + defined(CONFIG_PM520) || \ + defined(CONFIG_TOP5200) || \ + defined(CONFIG_TQM5200) || \ + defined(CONFIG_UC101) || \ + defined(CONFIG_V38B) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else diff --git a/include/configs/cm1_qp1.h b/include/configs/cm1_qp1.h new file mode 100644 index 0000000000..effa41c052 --- /dev/null +++ b/include/configs/cm1_qp1.h @@ -0,0 +1,358 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_CM1_QP1 1 /* ... on CM1.QP1 module */ + + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_I2C | \ + CFG_CMD_FLASH | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP | \ + CFG_CMD_USB | \ + CFG_CMD_FAT | \ + CFG_CMD_JFFS2) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 57600 /* ... at 57600 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ +/* use misc_init_r() to read ethaddr from I2C EEPROM (see CFG_I2C_EEPROM) */ +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ + + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | CFG_POST_CPU | CFG_POST_I2C) +#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) +/* List of I2C addresses to be verified by POST */ +#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM } + + +/* display image timestamps */ +#define CONFIG_TIMESTAMP 1 + + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \ + "echo" +#undef CONFIG_BOOTARGS + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=cm1_qp1\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.33\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "console=ttyPSC0\0" \ + "u-boot_addr=100000\0" \ + "kernel_addr=200000\0" \ + "kernel_addr_flash=fc0c0000\0" \ + "fdt_addr=400000\0" \ + "fdt_addr_flash=fc0a0000\0" \ + "ramdisk_addr=500000\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "u-boot=/tftpboot/cm1_qp1/u-boot.bin\0" \ + "bootfile=/tftpboot/cm1_qp1/uImage\0" \ + "fdt_file=/tftpboot/cm1_qp1/cm1_qp1.dtb\0" \ + "load=tftp ${u-boot_addr} ${u-boot}\0" \ + "update=prot off fc000000 fc05ffff; era fc000000 fc05ffff; " \ + "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ + "prot on fc000000 fc05ffff\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=${console},${baudrate}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off panic=1\0" \ + "flash_flash=run flashargs addinit addip addcons;" \ + "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ + "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ + "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ + "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_flash" + + +/* + * Low level configuration + */ + + +/* + * Clock configuration + */ +#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ +#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ + + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_LOWBOOT 1 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#endif + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ +/* use board_early_init_r to enable flash write in CS_BOOT */ +#define CONFIG_BOARD_EARLY_INIT_R + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* No burst, dead cycle = 1 for CS0 (Flash) */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x00000001 + + +/* + * SDRAM configuration + * settings for k4s561632E-xx75, assuming XLB = 132 MHz + */ +#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ +#define SDRAM_CONTROL 0x514F0000 +#define SDRAM_CONFIG1 0xE2333900 +#define SDRAM_CONFIG2 0x8EE70000 + + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE TEXT_BASE +/* we need these despite using CFI */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ +#define CFG_FLASH_SIZE 0x02000000 /* 32 MiB */ + + +/* + * MTD configuration + */ +#define CONFIG_JFFS2_CMDLINE 1 +#define MTDIDS_DEFAULT "nor0=cm1qp1-0" +#define MTDPARTS_DEFAULT "mtdparts=cm1qp1-0:" \ + "384k(uboot),128k(env)," \ + "128k(redund_env),128k(dtb)," \ + "2m(kernel),27904k(rootfs)," \ + "-(config)" + + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ +#define CFG_I2C_SPEED 40000 /* 40 kHz */ +#define CFG_I2C_SLAVE 0x0 +#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */ +#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */ + + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + + +/* + * USB configuration + */ +#define CONFIG_USB_OHCI 1 +#define CONFIG_USB_STORAGE 1 +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 +/* Partitions (for USB) */ +#define CONFIG_MAC_PARTITION 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_ISO_PARTITION 1 + +/* + * Invoke our last_stage_init function - needed by fwupdate + */ +#define CONFIG_LAST_STAGE_INIT 1 + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +/* Configuration of redundant environment */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + + +/* + * Pin multiplexing configuration + */ + +/* + * CS1/GPIO_WKUP_6: GPIO (default) + * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 + * IRDA/PSC6: UART + * Ether: Ethernet 100Mbit with MD + * PCI_DIS: PCI controller disabled + * USB: USB + * PSC3: SPI with UART3 + * PSC2: UART + * PSC1: UART + */ +#define CFG_GPS_PORT_CONFIG 0x10559C44 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP 1 /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_ALT_MEMTEST 1 +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ + +#define CONFIG_LOOPW 1 + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */ + + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + + +/* + * Flat Device Tree support + */ +#define CONFIG_OF_FLAT_TREE 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define OF_FLAT_TREE_MAX_SIZE 8192 /* max size of the flat tree (8K) */ +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" + +#endif /* __CONFIG_H */ From 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 12 Jul 2007 01:45:34 +0200 Subject: [PATCH 3/7] Update CHANGELOG, minor coding style cleanup. Signed-off-by: Wolfgang Denk --- CHANGELOG | 28 ++++++++++++++++++++++++++++ cpu/ppc4xx/44x_spd_ddr.c | 2 +- doc/README.sha1 | 10 +++++----- 3 files changed, 34 insertions(+), 6 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index 2397191fc9..fef629ad46 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,31 @@ +commit fa1df308926a6f70e3504c57514ef27ac31fd13a +Author: Bartlomiej Sieka +Date: Wed Jul 11 20:11:07 2007 +0200 + + CM1.QP1: Support for the Schindler CM1.QP1 board. + + Signed-off-by: Piotr Kruszynski + Signed-off-by: Bartlomiej Sieka + +commit 96e1d75be8193ca79e4215a368bf9d7f2362450f +Author: Heiko Schocher +Date: Wed Jul 11 18:39:11 2007 +0200 + + [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed + - now the Flash ST M29W040B is supported (not tested) + - fix the "led" command + - fix compile error, if BUILD_DIR is used + + Signed-off-by: Heiko Schocher + +commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876 +Author: Wolfgang Denk +Date: Tue Jul 10 00:01:28 2007 +0200 + + Coding style cleanup; update CHANGELOG. + + Signed-off-by: Wolfgang Denk + commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f Author: Wolfgang Denk Date: Fri Jul 6 02:50:19 2007 +0200 diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 8c18d0f4e2..6d6fba1802 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -1017,7 +1017,7 @@ static int short_mem_test(void) */ for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { -//printf("bank enabled base:%x\n", &membase[j]); + /* printf("bank enabled base:%x\n", &membase[j]); */ membase[j] = test[i][j]; ppcDcbf((unsigned long)&(membase[j])); } diff --git a/doc/README.sha1 b/doc/README.sha1 index 92dc8fffae..7992f7fb4c 100644 --- a/doc/README.sha1 +++ b/doc/README.sha1 @@ -34,11 +34,11 @@ a) cp the new Image on a position in RAM (here 0x300000) b) Initialize the SHA1 sum in the Image with 0x00 The SHA1 sum is stored in Flash at: - CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS - for the pcs440ep Flash: 0xfffa0000 + 0x60000 + -0x20 - = 0xffffffe0 - for the example in RAM: 0x300000 + 0x60000 + -0x20 - = 0x35ffe0 + CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS + for the pcs440ep Flash: 0xfffa0000 + 0x60000 + -0x20 + = 0xffffffe0 + for the example in RAM: 0x300000 + 0x60000 + -0x20 + = 0x35ffe0 note: a SHA1 checksum is 20 bytes long. From 907902472391b6ca1876ec300687562ecaf459b1 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 13 Jul 2007 08:26:05 +0200 Subject: [PATCH 4/7] [PCS440EP] - The DIAG LEDs are now blinking, if an error occur - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher --- Makefile | 2 +- board/pcs440ep/pcs440ep.c | 18 +++++++++++++++--- 2 files changed, 16 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index bfa38460da..3af9962e67 100644 --- a/Makefile +++ b/Makefile @@ -268,7 +268,7 @@ $(obj)u-boot.img: $(obj)u-boot.bin -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin - $(obj)./tools/ubsha1 $(obj)u-boot.bin + $(obj)tools/ubsha1 $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 0e34a76cb9..696423eacb 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -238,7 +238,13 @@ void load_sernum_ethaddr (void) } /* Env doesnt exist -> hang */ status_led_blink (); - hang (); + /* here we do this "handy" because we have no interrupts + at this time */ + puts ("### EEPROM ERROR ### Please RESET the board ###\n"); + for (;;) { + __led_toggle (12); + udelay (100000); + } return; } @@ -416,7 +422,13 @@ static void pcs440ep_checksha1 (void) if ((cs_test = getenv ("cs_test")) == NULL) { /* Env doesnt exist -> hang */ status_led_blink (); - hang (); + /* here we do this "handy" because we have no interrupts + at this time */ + puts ("### SHA1 ERROR ### Please RESET the board ###\n"); + for (;;) { + __led_toggle (2); + udelay (100000); + } } if (strncmp (cs_test, "off", 3) == 0) { @@ -517,7 +529,7 @@ void spd_ddr_init_hang (void) status_led_set (1, STATUS_LED_ON); /* we cannot use hang() because we are still running from Flash, and so the status_led driver is not initialized */ - puts ("### ERROR ### Please RESET the board ###\n"); + puts ("### SDRAM ERROR ### Please RESET the board ###\n"); for (;;) { __led_toggle (4); udelay (100000); From fad63407154f46246ce80d53a9c669a44362ac67 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 13 Jul 2007 09:54:17 +0200 Subject: [PATCH 5/7] make show_boot_progress () weak. Signed-off-by: Heiko Schocher --- common/cmd_bootm.c | 69 ++++++++++++++----------------- common/cmd_doc.c | 33 ++++++--------- common/cmd_ide.c | 49 ++++++++++------------ common/cmd_nand.c | 66 +++++++++++++---------------- common/cmd_net.c | 28 ++++--------- common/env_common.c | 9 +--- common/main.c | 6 +++ drivers/nand_legacy/nand_legacy.c | 7 ---- include/common.h | 8 +++- lib_arm/armlinux.c | 27 +++++------- lib_avr32/avr32_linux.c | 27 +++++------- lib_blackfin/bf533_linux.c | 7 ---- lib_blackfin/post.c | 8 +--- lib_m68k/m68k_linux.c | 27 +++++------- lib_microblaze/microblaze_linux.c | 27 +++++------- lib_mips/mips_linux.c | 27 +++++------- lib_ppc/board.c | 2 - net/eth.c | 14 ++----- post/post.c | 8 +--- 19 files changed, 173 insertions(+), 276 deletions(-) diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index a6499e8dd9..ba286f1e63 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -56,13 +56,6 @@ DECLARE_GLOBAL_DATA_PTR; #include #endif -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - #ifdef CFG_INIT_RAM_LOCK #include #endif @@ -176,7 +169,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) addr = simple_strtoul(argv[1], NULL, 16); } - SHOW_BOOT_PROGRESS (1); + show_boot_progress (1); printf ("## Booting image at %08lx ...\n", addr); /* Copy header so we can blank CRC field for re-calculation */ @@ -200,11 +193,11 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif /* __I386__ */ { puts ("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS (-1); + show_boot_progress (-1); return 1; } } - SHOW_BOOT_PROGRESS (2); + show_boot_progress (2); data = (ulong)&header; len = sizeof(image_header_t); @@ -214,10 +207,10 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (crc32 (0, (uchar *)data, len) != checksum) { puts ("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS (-2); + show_boot_progress (-2); return 1; } - SHOW_BOOT_PROGRESS (3); + show_boot_progress (3); #ifdef CONFIG_HAS_DATAFLASH if (addr_dataflash(addr)){ @@ -238,12 +231,12 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts (" Verifying Checksum ... "); if (crc32 (0, (uchar *)data, len) != ntohl(hdr->ih_dcrc)) { printf ("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS (-3); + show_boot_progress (-3); return 1; } puts ("OK\n"); } - SHOW_BOOT_PROGRESS (4); + show_boot_progress (4); len_ptr = (ulong *)data; @@ -272,10 +265,10 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif { printf ("Unsupported Architecture 0x%x\n", hdr->ih_arch); - SHOW_BOOT_PROGRESS (-4); + show_boot_progress (-4); return 1; } - SHOW_BOOT_PROGRESS (5); + show_boot_progress (5); switch (hdr->ih_type) { case IH_TYPE_STANDALONE: @@ -297,10 +290,10 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) data += 4; break; default: printf ("Wrong Image Type for %s command\n", cmdtp->name); - SHOW_BOOT_PROGRESS (-5); + show_boot_progress (-5); return 1; } - SHOW_BOOT_PROGRESS (6); + show_boot_progress (6); /* * We have reached the point of no return: we are going to @@ -351,7 +344,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (gunzip ((void *)ntohl(hdr->ih_load), unc_len, (uchar *)data, &len) != 0) { puts ("GUNZIP ERROR - must RESET board to recover\n"); - SHOW_BOOT_PROGRESS (-6); + show_boot_progress (-6); do_reset (cmdtp, flag, argc, argv); } break; @@ -368,7 +361,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) CFG_MALLOC_LEN < (4096 * 1024), 0); if (i != BZ_OK) { printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i); - SHOW_BOOT_PROGRESS (-6); + show_boot_progress (-6); udelay(100000); do_reset (cmdtp, flag, argc, argv); } @@ -378,11 +371,11 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (iflag) enable_interrupts(); printf ("Unimplemented compression type %d\n", hdr->ih_comp); - SHOW_BOOT_PROGRESS (-7); + show_boot_progress (-7); return 1; } puts ("OK\n"); - SHOW_BOOT_PROGRESS (7); + show_boot_progress (7); switch (hdr->ih_type) { case IH_TYPE_STANDALONE: @@ -409,10 +402,10 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (iflag) enable_interrupts(); printf ("Can't boot image type %d\n", hdr->ih_type); - SHOW_BOOT_PROGRESS (-8); + show_boot_progress (-8); return 1; } - SHOW_BOOT_PROGRESS (8); + show_boot_progress (8); switch (hdr->ih_os) { default: /* handled by (original) Linux case */ @@ -458,7 +451,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #endif } - SHOW_BOOT_PROGRESS (-9); + show_boot_progress (-9); #ifdef DEBUG puts ("\n## Control returned to monitor - resetting...\n"); do_reset (cmdtp, flag, argc, argv); @@ -637,7 +630,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, #endif if (argc >= 3) { debug ("Not skipping initrd\n"); - SHOW_BOOT_PROGRESS (9); + show_boot_progress (9); addr = simple_strtoul(argv[2], NULL, 16); @@ -648,7 +641,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, if (ntohl(hdr->ih_magic) != IH_MAGIC) { puts ("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS (-10); + show_boot_progress (-10); do_reset (cmdtp, flag, argc, argv); } @@ -660,11 +653,11 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, if (crc32 (0, (uchar *)data, len) != checksum) { puts ("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS (-11); + show_boot_progress (-11); do_reset (cmdtp, flag, argc, argv); } - SHOW_BOOT_PROGRESS (10); + show_boot_progress (10); print_image_hdr (hdr); @@ -697,19 +690,19 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, if (csum != ntohl(hdr->ih_dcrc)) { puts ("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS (-12); + show_boot_progress (-12); do_reset (cmdtp, flag, argc, argv); } puts ("OK\n"); } - SHOW_BOOT_PROGRESS (11); + show_boot_progress (11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_PPC) || (hdr->ih_type != IH_TYPE_RAMDISK) ) { puts ("No Linux PPC Ramdisk Image\n"); - SHOW_BOOT_PROGRESS (-13); + show_boot_progress (-13); do_reset (cmdtp, flag, argc, argv); } @@ -720,7 +713,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, u_long tail = ntohl(len_ptr[0]) % 4; int i; - SHOW_BOOT_PROGRESS (13); + show_boot_progress (13); /* skip kernel length and terminator */ data = (ulong)(&len_ptr[2]); @@ -739,7 +732,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, /* * no initrd image */ - SHOW_BOOT_PROGRESS (14); + show_boot_progress (14); len = data = 0; } @@ -890,7 +883,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, initrd_start = nsp; } - SHOW_BOOT_PROGRESS (12); + show_boot_progress (12); debug ("## initrd at 0x%08lX ... 0x%08lX (len=%ld=0x%lX)\n", data, data + len - 1, len, len); @@ -926,7 +919,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, debug ("## Transferring control to Linux (at address %08lx) ...\n", (ulong)kernel); - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) unlock_ram_in_cache(); @@ -1115,7 +1108,7 @@ do_bootm_netbsd (cmd_tbl_t *cmdtp, int flag, printf ("## Transferring control to NetBSD stage-2 loader (at address %08lx) ...\n", (ulong)loader); - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); /* * NetBSD Stage-2 Loader Parameters: @@ -1578,7 +1571,7 @@ do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], printf ("## Transferring control to RTEMS (at address %08lx) ...\n", (ulong)entry_point); - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); /* * RTEMS Parameters: diff --git a/common/cmd_doc.c b/common/cmd_doc.c index 4e624a2f3f..9814d754fb 100644 --- a/common/cmd_doc.c +++ b/common/cmd_doc.c @@ -12,13 +12,6 @@ #include #include -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - #if (CONFIG_COMMANDS & CFG_CMD_DOC) #include @@ -216,7 +209,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) image_header_t *hdr; int rcode = 0; - SHOW_BOOT_PROGRESS (34); + show_boot_progress (34); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -237,27 +230,27 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-35); + show_boot_progress (-35); return 1; } - SHOW_BOOT_PROGRESS (35); + show_boot_progress (35); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-36); + show_boot_progress (-36); return 1; } - SHOW_BOOT_PROGRESS (36); + show_boot_progress (36); dev = simple_strtoul(boot_device, &ep, 16); if ((dev >= CFG_MAX_DOC_DEVICE) || (doc_dev_desc[dev].ChipID == DOC_ChipID_UNKNOWN)) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-37); + show_boot_progress (-37); return 1; } - SHOW_BOOT_PROGRESS (37); + show_boot_progress (37); printf ("\nLoading from device %d: %s at 0x%lX (offset 0x%lX)\n", dev, doc_dev_desc[dev].name, doc_dev_desc[dev].physadr, @@ -266,10 +259,10 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (doc_rw (doc_dev_desc + dev, 1, offset, SECTORSIZE, NULL, (u_char *)addr)) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-38); + show_boot_progress (-38); return 1; } - SHOW_BOOT_PROGRESS (38); + show_boot_progress (38); hdr = (image_header_t *)addr; @@ -281,18 +274,18 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt -= SECTORSIZE; } else { puts ("\n** Bad Magic Number **\n"); - SHOW_BOOT_PROGRESS (-39); + show_boot_progress (-39); return 1; } - SHOW_BOOT_PROGRESS (39); + show_boot_progress (39); if (doc_rw (doc_dev_desc + dev, 1, offset + SECTORSIZE, cnt, NULL, (u_char *)(addr+SECTORSIZE))) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-40); + show_boot_progress (-40); return 1; } - SHOW_BOOT_PROGRESS (40); + show_boot_progress (40); /* Loading ok, update default load address */ diff --git a/common/cmd_ide.c b/common/cmd_ide.c index c74cde96e8..8779156949 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -59,13 +59,6 @@ unsigned long mips_io_port_base = 0; #endif #endif -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - #ifdef CONFIG_IDE_8xx_DIRECT DECLARE_GLOBAL_DATA_PTR; #endif @@ -385,7 +378,7 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) image_header_t *hdr; int rcode = 0; - SHOW_BOOT_PROGRESS (41); + show_boot_progress (41); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -401,50 +394,50 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-42); + show_boot_progress (-42); return 1; } - SHOW_BOOT_PROGRESS (42); + show_boot_progress (42); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-43); + show_boot_progress (-43); return 1; } - SHOW_BOOT_PROGRESS (43); + show_boot_progress (43); dev = simple_strtoul(boot_device, &ep, 16); if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-44); + show_boot_progress (-44); return 1; } - SHOW_BOOT_PROGRESS (44); + show_boot_progress (44); if (*ep) { if (*ep != ':') { puts ("\n** Invalid boot device, use `dev[:part]' **\n"); - SHOW_BOOT_PROGRESS (-45); + show_boot_progress (-45); return 1; } part = simple_strtoul(++ep, NULL, 16); } - SHOW_BOOT_PROGRESS (45); + show_boot_progress (45); if (get_partition_info (&ide_dev_desc[dev], part, &info)) { - SHOW_BOOT_PROGRESS (-46); + show_boot_progress (-46); return 1; } - SHOW_BOOT_PROGRESS (46); + show_boot_progress (46); if ((strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) && (strncmp((char *)info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) { printf ("\n** Invalid partition type \"%.32s\"" " (expect \"" BOOT_PART_TYPE "\")\n", info.type); - SHOW_BOOT_PROGRESS (-47); + show_boot_progress (-47); return 1; } - SHOW_BOOT_PROGRESS (47); + show_boot_progress (47); printf ("\nLoading from IDE device %d, partition %d: " "Name: %.32s Type: %.32s\n", @@ -455,29 +448,29 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) { printf ("** Read error on %d:%d\n", dev, part); - SHOW_BOOT_PROGRESS (-48); + show_boot_progress (-48); return 1; } - SHOW_BOOT_PROGRESS (48); + show_boot_progress (48); hdr = (image_header_t *)addr; if (ntohl(hdr->ih_magic) != IH_MAGIC) { printf("\n** Bad Magic Number **\n"); - SHOW_BOOT_PROGRESS (-49); + show_boot_progress (-49); return 1; } - SHOW_BOOT_PROGRESS (49); + show_boot_progress (49); checksum = ntohl(hdr->ih_hcrc); hdr->ih_hcrc = 0; if (crc32 (0, (uchar *)hdr, sizeof(image_header_t)) != checksum) { puts ("\n** Bad Header Checksum **\n"); - SHOW_BOOT_PROGRESS (-50); + show_boot_progress (-50); return 1; } - SHOW_BOOT_PROGRESS (50); + show_boot_progress (50); hdr->ih_hcrc = htonl(checksum); /* restore checksum for later use */ print_image_hdr (hdr); @@ -490,10 +483,10 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt, (ulong *)(addr+info.blksz)) != cnt) { printf ("** Read error on %d:%d\n", dev, part); - SHOW_BOOT_PROGRESS (-51); + show_boot_progress (-51); return 1; } - SHOW_BOOT_PROGRESS (51); + show_boot_progress (51); /* Loading ok, update default load address */ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index b088150f3b..cb62661ec2 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -25,14 +25,6 @@ #include #include #include - -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - #include #include @@ -486,19 +478,19 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); - SHOW_BOOT_PROGRESS(-56); + show_boot_progress (-56); return 1; } - SHOW_BOOT_PROGRESS(56); + show_boot_progress (56); hdr = (image_header_t *) addr; if (ntohl(hdr->ih_magic) != IH_MAGIC) { printf("\n** Bad Magic Number 0x%x **\n", hdr->ih_magic); - SHOW_BOOT_PROGRESS(-57); + show_boot_progress (-57); return 1; } - SHOW_BOOT_PROGRESS(57); + show_boot_progress (57); print_image_hdr(hdr); @@ -507,10 +499,10 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, r = nand_read(nand, offset, &cnt, (u_char *) addr); if (r) { puts("** Read error\n"); - SHOW_BOOT_PROGRESS(-58); + show_boot_progress (-58); return 1; } - SHOW_BOOT_PROGRESS(58); + show_boot_progress (58); /* Loading ok, update default load address */ @@ -562,7 +554,7 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } #endif - SHOW_BOOT_PROGRESS(52); + show_boot_progress(52); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -586,26 +578,26 @@ int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) usage: #endif printf("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS(-53); + show_boot_progress(-53); return 1; } - SHOW_BOOT_PROGRESS(53); + show_boot_progress(53); if (!boot_device) { puts("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS(-54); + show_boot_progress(-54); return 1; } - SHOW_BOOT_PROGRESS(54); + show_boot_progress(54); idx = simple_strtoul(boot_device, NULL, 16); if (idx < 0 || idx >= CFG_MAX_NAND_DEVICE || !nand_info[idx].name) { printf("\n** Device %d not available\n", idx); - SHOW_BOOT_PROGRESS(-55); + show_boot_progress(-55); return 1; } - SHOW_BOOT_PROGRESS(55); + show_boot_progress(55); return nand_load_image(cmdtp, &nand_info[idx], offset, addr, argv[0]); } @@ -627,11 +619,11 @@ U_BOOT_CMD(nboot, 4, 1, do_nandboot, #include #include -#ifdef CONFIG_SHOW_BOOT_PROGRESS +#ifdef CONFIG_show_boot_progress # include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +# define show_boot_progress(arg) show_boot_progress(arg) #else -# define SHOW_BOOT_PROGRESS(arg) +# define show_boot_progress(arg) #endif #if (CONFIG_COMMANDS & CFG_CMD_NAND) @@ -894,7 +886,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong offset = 0; image_header_t *hdr; int rcode = 0; - SHOW_BOOT_PROGRESS(52); + show_boot_progress (52); switch (argc) { case 1: addr = CFG_LOAD_ADDR; @@ -915,27 +907,27 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS (-53); + show_boot_progress (-53); return 1; } - SHOW_BOOT_PROGRESS(53); + show_boot_progress (53); if (!boot_device) { puts ("\n** No boot device **\n"); - SHOW_BOOT_PROGRESS (-54); + show_boot_progress (-54); return 1; } - SHOW_BOOT_PROGRESS(54); + show_boot_progress (54); dev = simple_strtoul(boot_device, &ep, 16); if ((dev >= CFG_MAX_NAND_DEVICE) || (nand_dev_desc[dev].ChipID == NAND_ChipID_UNKNOWN)) { printf ("\n** Device %d not available\n", dev); - SHOW_BOOT_PROGRESS (-55); + show_boot_progress (-55); return 1; } - SHOW_BOOT_PROGRESS(55); + show_boot_progress (55); printf ("\nLoading from device %d: %s at 0x%lx (offset 0x%lx)\n", dev, nand_dev_desc[dev].name, nand_dev_desc[dev].IO_ADDR, @@ -944,10 +936,10 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset, SECTORSIZE, NULL, (u_char *)addr)) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-56); + show_boot_progress (-56); return 1; } - SHOW_BOOT_PROGRESS(56); + show_boot_progress (56); hdr = (image_header_t *)addr; @@ -959,19 +951,19 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) cnt -= SECTORSIZE; } else { printf ("\n** Bad Magic Number 0x%x **\n", ntohl(hdr->ih_magic)); - SHOW_BOOT_PROGRESS (-57); + show_boot_progress (-57); return 1; } - SHOW_BOOT_PROGRESS(57); + show_boot_progress (57); if (nand_legacy_rw (nand_dev_desc + dev, NANDRW_READ, offset + SECTORSIZE, cnt, NULL, (u_char *)(addr+SECTORSIZE))) { printf ("** Read error on %d\n", dev); - SHOW_BOOT_PROGRESS (-58); + show_boot_progress (-58); return 1; } - SHOW_BOOT_PROGRESS(58); + show_boot_progress (58); /* Loading ok, update default load address */ diff --git a/common/cmd_net.c b/common/cmd_net.c index e9d552e235..f1097a9951 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -30,14 +30,6 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -extern void show_boot_progress (int val); -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - extern int do_bootm (cmd_tbl_t *, int, int, char *[]); static int netboot_common (proto_t, cmd_tbl_t *, int , char *[]); @@ -191,23 +183,23 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) break; default: printf ("Usage:\n%s\n", cmdtp->usage); - SHOW_BOOT_PROGRESS(-80); + show_boot_progress (-80); return 1; } - SHOW_BOOT_PROGRESS(80); + show_boot_progress (80); if ((size = NetLoop(proto)) < 0) { - SHOW_BOOT_PROGRESS(-81); + show_boot_progress (-81); return 1; } - SHOW_BOOT_PROGRESS(81); + show_boot_progress (81); /* NetLoop ok, update environment */ netboot_update_env(); /* done if no file was loaded (no errors though) */ if (size == 0) { - SHOW_BOOT_PROGRESS(-82); + show_boot_progress (-82); return 0; } @@ -222,23 +214,21 @@ netboot_common (proto_t proto, cmd_tbl_t *cmdtp, int argc, char *argv[]) printf ("Automatic boot of image at addr 0x%08lX ...\n", load_addr); - SHOW_BOOT_PROGRESS(82); + show_boot_progress (82); rcode = do_bootm (cmdtp, 0, 1, local_args); } #ifdef CONFIG_AUTOSCRIPT if (((s = getenv("autoscript")) != NULL) && (strcmp(s,"yes") == 0)) { printf("Running autoscript at addr 0x%08lX ...\n", load_addr); - SHOW_BOOT_PROGRESS(83); + show_boot_progress (83); rcode = autoscript (load_addr); } #endif -#if defined(CONFIG_SHOW_BOOT_PROGRESS) if (rcode < 0) - SHOW_BOOT_PROGRESS(-83); + show_boot_progress (-83); else - SHOW_BOOT_PROGRESS(84); -#endif + show_boot_progress (84); return rcode; } diff --git a/common/env_common.c b/common/env_common.c index 0462cad6d7..a49481244e 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -30,13 +30,6 @@ #include #include -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_AMIGAONEG3SE @@ -232,7 +225,7 @@ void env_relocate (void) puts ("Using default environment\n\n"); #else puts ("*** Warning - bad CRC, using default environment\n\n"); - SHOW_BOOT_PROGRESS (-60); + show_boot_progress (-60); #endif if (sizeof(default_environment) > ENV_SIZE) diff --git a/common/main.c b/common/main.c index a00ebc194c..000686d85a 100644 --- a/common/main.c +++ b/common/main.c @@ -44,6 +44,12 @@ DECLARE_GLOBAL_DATA_PTR; #endif +/* + * Board-specific Platform code can reimplement show_boot_progress () if needed + */ +void inline __show_boot_progress (int val) {} +void inline show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress"))); + #if defined(CONFIG_BOOT_RETRY_TIME) && defined(CONFIG_RESET_TO_RETRY) extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* for do_reset() prototype */ #endif diff --git a/drivers/nand_legacy/nand_legacy.c b/drivers/nand_legacy/nand_legacy.c index 458046d41c..753f541295 100644 --- a/drivers/nand_legacy/nand_legacy.c +++ b/drivers/nand_legacy/nand_legacy.c @@ -15,13 +15,6 @@ #include #include -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - #if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY) #include diff --git a/include/common.h b/include/common.h index d8b6b469e5..23f93907ee 100644 --- a/include/common.h +++ b/include/common.h @@ -626,9 +626,13 @@ int fgetc(int file); int pcmcia_init (void); -#ifdef CONFIG_SHOW_BOOT_PROGRESS -void show_boot_progress (int status); +#ifdef CONFIG_STATUS_LED +# include #endif +/* + * Board-specific Platform code can reimplement show_boot_progress () if needed + */ +void inline show_boot_progress (int val); #ifdef CONFIG_INIT_CRITICAL #error CONFIG_INIT_CRITICAL is deprecated! diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c index 56b7fca833..6d32a411fd 100644 --- a/lib_arm/armlinux.c +++ b/lib_arm/armlinux.c @@ -66,13 +66,6 @@ static void setup_videolfb_tag (gd_t *gd); static struct tag *params; #endif /* CONFIG_SETUP_MEMORY_TAGS || CONFIG_CMDLINE_TAG || CONFIG_INITRD_TAG */ -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - extern image_header_t header; /* from cmd_bootm.c */ @@ -96,7 +89,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], * Check if there is an initrd image */ if (argc >= 3) { - SHOW_BOOT_PROGRESS (9); + show_boot_progress (9); addr = simple_strtoul (argv[2], NULL, 16); @@ -114,7 +107,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], if (ntohl (hdr->ih_magic) != IH_MAGIC) { printf ("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS (-10); + show_boot_progress (-10); do_reset (cmdtp, flag, argc, argv); } @@ -126,11 +119,11 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], if (crc32 (0, (unsigned char *) data, len) != checksum) { printf ("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS (-11); + show_boot_progress (-11); do_reset (cmdtp, flag, argc, argv); } - SHOW_BOOT_PROGRESS (10); + show_boot_progress (10); print_image_hdr (hdr); @@ -151,19 +144,19 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], csum = crc32 (0, (unsigned char *) data, len); if (csum != ntohl (hdr->ih_dcrc)) { printf ("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS (-12); + show_boot_progress (-12); do_reset (cmdtp, flag, argc, argv); } printf ("OK\n"); } - SHOW_BOOT_PROGRESS (11); + show_boot_progress (11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_ARM) || (hdr->ih_type != IH_TYPE_RAMDISK)) { printf ("No Linux ARM Ramdisk Image\n"); - SHOW_BOOT_PROGRESS (-13); + show_boot_progress (-13); do_reset (cmdtp, flag, argc, argv); } @@ -182,7 +175,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], ulong tail = ntohl (len_ptr[0]) % 4; int i; - SHOW_BOOT_PROGRESS (13); + show_boot_progress (13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -201,7 +194,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], /* * no initrd image */ - SHOW_BOOT_PROGRESS (14); + show_boot_progress (14); len = data = 0; } @@ -220,7 +213,7 @@ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], initrd_end = 0; } - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); debug ("## Transferring control to Linux (at address %08lx) ...\n", (ulong) theKernel); diff --git a/lib_avr32/avr32_linux.c b/lib_avr32/avr32_linux.c index 6095e2ff21..62afbd2497 100644 --- a/lib_avr32/avr32_linux.c +++ b/lib_avr32/avr32_linux.c @@ -36,13 +36,6 @@ extern int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* CPU-specific hook to allow flushing of caches, etc. */ extern void prepare_to_boot(void); -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - extern image_header_t header; /* from cmd_bootm.c */ static struct tag *setup_start_tag(struct tag *params) @@ -204,7 +197,7 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], * Check if there is an initrd image */ if (argc >= 3) { - SHOW_BOOT_PROGRESS(9); + show_boot_progress (9); addr = simple_strtoul(argv[2], NULL, 16); @@ -215,7 +208,7 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], if (ntohl(hdr->ih_magic) != IH_MAGIC) { puts("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS(-10); + show_boot_progress (-10); do_reset(cmdtp, flag, argc, argv); } @@ -226,11 +219,11 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], if (crc32(0, (unsigned char *)data, len) != checksum) { puts("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS(-11); + show_boot_progress (-11); do_reset(cmdtp, flag, argc, argv); } - SHOW_BOOT_PROGRESS(10); + show_boot_progress (10); print_image_hdr(hdr); @@ -244,26 +237,26 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], csum = crc32(0, (unsigned char *)data, len); if (csum != ntohl(hdr->ih_dcrc)) { puts("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS(-12); + show_boot_progress (-12); do_reset(cmdtp, flag, argc, argv); } puts("OK\n"); } - SHOW_BOOT_PROGRESS(11); + show_boot_progress (11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_AVR32) || (hdr->ih_type != IH_TYPE_RAMDISK)) { puts("Not a Linux/AVR32 RAMDISK image\n"); - SHOW_BOOT_PROGRESS(-13); + show_boot_progress (-13); do_reset(cmdtp, flag, argc, argv); } } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { ulong tail = ntohl (len_ptr[0]) % 4; int i; - SHOW_BOOT_PROGRESS (13); + show_boot_progress (13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -279,7 +272,7 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], len = ntohl (len_ptr[1]); } else { /* no initrd image */ - SHOW_BOOT_PROGRESS(14); + show_boot_progress (14); len = data = 0; } @@ -291,7 +284,7 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], initrd_end = 0; } - SHOW_BOOT_PROGRESS(15); + show_boot_progress (15); params = params_start = (struct tag *)gd->bd->bi_boot_params; params = setup_start_tag(params); diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c index 3b9c4df988..80a3dc7d6e 100644 --- a/lib_blackfin/bf533_linux.c +++ b/lib_blackfin/bf533_linux.c @@ -36,13 +36,6 @@ #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -#ifdef CONFIG_SHOW_BOOT_PROGRESS -#include -#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -#define SHOW_BOOT_PROGRESS(arg) -#endif - #define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */ #ifdef SHARED_RESOURCES diff --git a/lib_blackfin/post.c b/lib_blackfin/post.c index 0e76026adf..7c9478def5 100644 --- a/lib_blackfin/post.c +++ b/lib_blackfin/post.c @@ -132,9 +132,7 @@ void post_output_backlog(void) post_log("PASSED\n"); else { post_log("FAILED\n"); -#ifdef CONFIG_SHOW_BOOT_PROGRESS - show_boot_progress(-31); -#endif + show_boot_progress (-31); } } } @@ -245,9 +243,7 @@ static int post_run_single(struct post_test *test, } else { if ((*test->test) (flags) != 0) { post_log("FAILED\n"); -#ifdef CONFIG_SHOW_BOOT_PROGRESS - show_boot_progress(-32); -#endif + show_boot_progress (-32); } else post_log("PASSED\n"); } diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index f87f56ea8f..6c194f80aa 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -34,13 +34,6 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - extern image_header_t header; /* from cmd_bootm.c */ extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); @@ -73,7 +66,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], * Check if there is an initrd image */ if (argc >= 3) { - SHOW_BOOT_PROGRESS (9); + show_boot_progress (9); addr = simple_strtoul (argv[2], NULL, 16); @@ -84,7 +77,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], if (ntohl (hdr->ih_magic) != IH_MAGIC) { printf ("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS (-10); + show_boot_progress (-10); do_reset (cmdtp, flag, argc, argv); } @@ -96,11 +89,11 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], if (crc32 (0, (char *) data, len) != checksum) { printf ("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS (-11); + show_boot_progress (-11); do_reset (cmdtp, flag, argc, argv); } - SHOW_BOOT_PROGRESS (10); + show_boot_progress (10); print_image_hdr (hdr); @@ -114,19 +107,19 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], csum = crc32 (0, (char *) data, len); if (csum != ntohl (hdr->ih_dcrc)) { printf ("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS (-12); + show_boot_progress (-12); do_reset (cmdtp, flag, argc, argv); } printf ("OK\n"); } - SHOW_BOOT_PROGRESS (11); + show_boot_progress (11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_M68K) || (hdr->ih_type != IH_TYPE_RAMDISK)) { printf ("No Linux M68K Ramdisk Image\n"); - SHOW_BOOT_PROGRESS (-13); + show_boot_progress (-13); do_reset (cmdtp, flag, argc, argv); } @@ -137,7 +130,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong tail = ntohl (len_ptr[0]) % 4; int i; - SHOW_BOOT_PROGRESS (13); + show_boot_progress (13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -156,7 +149,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], /* * no initrd image */ - SHOW_BOOT_PROGRESS (14); + show_boot_progress (14); data = 0; } @@ -175,7 +168,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], initrd_end = 0; } - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); #ifdef DEBUG printf ("## Transferring control to Linux (at address %08lx) ...\n", diff --git a/lib_microblaze/microblaze_linux.c b/lib_microblaze/microblaze_linux.c index 2c7885c1f1..68b58d4be8 100644 --- a/lib_microblaze/microblaze_linux.c +++ b/lib_microblaze/microblaze_linux.c @@ -32,13 +32,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - extern image_header_t header; /* from cmd_bootm.c */ /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); @@ -59,7 +52,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], /* Check if there is an initrd image */ if (argc >= 3) { - SHOW_BOOT_PROGRESS (9); + show_boot_progress (9); addr = simple_strtoul (argv[2], NULL, 16); @@ -70,7 +63,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], if (ntohl (hdr->ih_magic) != IH_MAGIC) { printf ("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS (-10); + show_boot_progress (-10); do_reset (cmdtp, flag, argc, argv); } @@ -82,11 +75,11 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], if (crc32 (0, (char *)data, len) != checksum) { printf ("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS (-11); + show_boot_progress (-11); do_reset (cmdtp, flag, argc, argv); } - SHOW_BOOT_PROGRESS (10); + show_boot_progress (10); print_image_hdr (hdr); @@ -100,19 +93,19 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], csum = crc32 (0, (char *)data, len); if (csum != ntohl (hdr->ih_dcrc)) { printf ("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS (-12); + show_boot_progress (-12); do_reset (cmdtp, flag, argc, argv); } printf ("OK\n"); } - SHOW_BOOT_PROGRESS (11); + show_boot_progress (11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_MICROBLAZE) || (hdr->ih_type != IH_TYPE_RAMDISK)) { printf ("No Linux Microblaze Ramdisk Image\n"); - SHOW_BOOT_PROGRESS (-13); + show_boot_progress (-13); do_reset (cmdtp, flag, argc, argv); } @@ -122,7 +115,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], } else if ((hdr->ih_type == IH_TYPE_MULTI) && (len_ptr[1])) { ulong tail = ntohl (len_ptr[0]) % 4; - SHOW_BOOT_PROGRESS (13); + show_boot_progress (13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -141,7 +134,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], /* * no initrd image */ - SHOW_BOOT_PROGRESS (14); + show_boot_progress (14); data = 0; } @@ -160,7 +153,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], initrd_end = 0; } - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); #ifdef DEBUG printf ("## Transferring control to Linux (at address %08lx) ...\n", diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c index 952d5a90ee..556b1804e0 100644 --- a/lib_mips/mips_linux.c +++ b/lib_mips/mips_linux.c @@ -33,13 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 -#ifdef CONFIG_SHOW_BOOT_PROGRESS -# include -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - extern image_header_t header; /* from cmd_bootm.c */ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -73,7 +66,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], * Check if there is an initrd image */ if (argc >= 3) { - SHOW_BOOT_PROGRESS (9); + show_boot_progress (9); addr = simple_strtoul (argv[2], NULL, 16); @@ -84,7 +77,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], if (ntohl (hdr->ih_magic) != IH_MAGIC) { printf ("Bad Magic Number\n"); - SHOW_BOOT_PROGRESS (-10); + show_boot_progress (-10); do_reset (cmdtp, flag, argc, argv); } @@ -96,11 +89,11 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], if (crc32 (0, (uchar *) data, len) != checksum) { printf ("Bad Header Checksum\n"); - SHOW_BOOT_PROGRESS (-11); + show_boot_progress (-11); do_reset (cmdtp, flag, argc, argv); } - SHOW_BOOT_PROGRESS (10); + show_boot_progress (10); print_image_hdr (hdr); @@ -114,19 +107,19 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], csum = crc32 (0, (uchar *) data, len); if (csum != ntohl (hdr->ih_dcrc)) { printf ("Bad Data CRC\n"); - SHOW_BOOT_PROGRESS (-12); + show_boot_progress (-12); do_reset (cmdtp, flag, argc, argv); } printf ("OK\n"); } - SHOW_BOOT_PROGRESS (11); + show_boot_progress (11); if ((hdr->ih_os != IH_OS_LINUX) || (hdr->ih_arch != IH_CPU_MIPS) || (hdr->ih_type != IH_TYPE_RAMDISK)) { printf ("No Linux MIPS Ramdisk Image\n"); - SHOW_BOOT_PROGRESS (-13); + show_boot_progress (-13); do_reset (cmdtp, flag, argc, argv); } @@ -137,7 +130,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong tail = ntohl (len_ptr[0]) % 4; int i; - SHOW_BOOT_PROGRESS (13); + show_boot_progress (13); /* skip kernel length and terminator */ data = (ulong) (&len_ptr[2]); @@ -156,7 +149,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], /* * no initrd image */ - SHOW_BOOT_PROGRESS (14); + show_boot_progress (14); data = 0; } @@ -175,7 +168,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], initrd_end = 0; } - SHOW_BOOT_PROGRESS (15); + show_boot_progress (15); #ifdef DEBUG printf ("## Transferring control to Linux (at address %08lx) ...\n", diff --git a/lib_ppc/board.c b/lib_ppc/board.c index f5d18fa9f6..3b1bfeab4a 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -1117,9 +1117,7 @@ void board_init_r (gd_t *id, ulong dest_addr) void hang (void) { puts ("### ERROR ### Please RESET the board ###\n"); -#ifdef CONFIG_SHOW_BOOT_PROGRESS show_boot_progress(-30); -#endif for (;;); } diff --git a/net/eth.c b/net/eth.c index 7414d70a03..9fb3a10edb 100644 --- a/net/eth.c +++ b/net/eth.c @@ -28,14 +28,6 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) -#if defined(CONFIG_SHOW_BOOT_PROGRESS) -# include -extern void show_ethcfg_progress (int arg); -# define SHOW_BOOT_PROGRESS(arg) show_boot_progress (arg) -#else -# define SHOW_BOOT_PROGRESS(arg) -#endif - #ifdef CFG_GT_6426x extern int gt6426x_eth_initialize(bd_t *bis); #endif @@ -150,7 +142,7 @@ int eth_initialize(bd_t *bis) eth_devices = NULL; eth_current = NULL; - SHOW_BOOT_PROGRESS(64); + show_boot_progress (64); #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) miiphy_init(); #endif @@ -256,12 +248,12 @@ int eth_initialize(bd_t *bis) if (!eth_devices) { puts ("No ethernet found.\n"); - SHOW_BOOT_PROGRESS(-64); + show_boot_progress (-64); } else { struct eth_device *dev = eth_devices; char *ethprime = getenv ("ethprime"); - SHOW_BOOT_PROGRESS(65); + show_boot_progress (65); do { if (eth_number) puts (", "); diff --git a/post/post.c b/post/post.c index 28435cc4af..4ff75ee4b1 100644 --- a/post/post.c +++ b/post/post.c @@ -129,9 +129,7 @@ void post_output_backlog ( void ) post_log ("PASSED\n"); else { post_log ("FAILED\n"); -#ifdef CONFIG_SHOW_BOOT_PROGRESS - show_boot_progress(-31); -#endif + show_boot_progress (-31); } } } @@ -241,9 +239,7 @@ static int post_run_single (struct post_test *test, } else { if ((*test->test) (flags) != 0) { post_log ("FAILED\n"); -#ifdef CONFIG_SHOW_BOOT_PROGRESS - show_boot_progress(-32); -#endif + show_boot_progress (-32); } else post_log ("PASSED\n"); From 011595307731a7a67a7445d107c279d031e8ab97 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Sat, 14 Jul 2007 01:06:58 +0200 Subject: [PATCH 6/7] [PCS440EP] - fix compile error, if BUILD_DIR is used --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index bfa38460da..3af9962e67 100644 --- a/Makefile +++ b/Makefile @@ -268,7 +268,7 @@ $(obj)u-boot.img: $(obj)u-boot.bin -d $< $@ $(obj)u-boot.sha1: $(obj)u-boot.bin - $(obj)./tools/ubsha1 $(obj)u-boot.bin + $(obj)tools/ubsha1 $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ From 3a6cab844cf74f76639d795e0be8717e02c86af7 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 14 Jul 2007 22:51:02 +0200 Subject: [PATCH 7/7] Update CHANGELOG Signed-off-by: Wolfgang Denk --- CHANGELOG | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/CHANGELOG b/CHANGELOG index fef629ad46..bcbf36e78d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,34 @@ +commit 011595307731a7a67a7445d107c279d031e8ab97 +Author: Heiko Schocher +Date: Sat Jul 14 01:06:58 2007 +0200 + + [PCS440EP] - fix compile error, if BUILD_DIR is used + +commit fad63407154f46246ce80d53a9c669a44362ac67 +Author: Heiko Schocher +Date: Fri Jul 13 09:54:17 2007 +0200 + + make show_boot_progress () weak. + + Signed-off-by: Heiko Schocher + +commit 907902472391b6ca1876ec300687562ecaf459b1 +Author: Heiko Schocher +Date: Fri Jul 13 08:26:05 2007 +0200 + + [PCS440EP] - The DIAG LEDs are now blinking, if an error occur + - fix compile error, if BUILD_DIR is used + + Signed-off-by: Heiko Schocher + +commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 +Author: Wolfgang Denk +Date: Thu Jul 12 01:45:34 2007 +0200 + + Update CHANGELOG, minor coding style cleanup. + + Signed-off-by: Wolfgang Denk + commit fa1df308926a6f70e3504c57514ef27ac31fd13a Author: Bartlomiej Sieka Date: Wed Jul 11 20:11:07 2007 +0200