diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1cf134624a..bbb1e2738b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1368,6 +1368,7 @@ config TARGET_LS1028ARDB
 	select ARM64
 	select ARMV8_MULTIENTRY
 	select ARCH_SUPPORT_TFABOOT
+	select BOARD_LATE_INIT
 	help
 	  Support for Freescale LS1028ARDB platform
 	  The LS1028A Development System (RDB) is a high-performance
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 275c66d992..b25639183f 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -74,11 +74,11 @@ config ARCH_LS1043A
 	select SYS_FSL_HAS_DDR4
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply CMD_PCI
 
 config ARCH_LS1046A
@@ -107,11 +107,11 @@ config ARCH_LS1046A
 	select SYS_FSL_SRDS_2
 	select ARCH_EARLY_INIT_R
 	select BOARD_EARLY_INIT_F
-	select SYS_I2C_MXC
-	select SYS_I2C_MXC_I2C1
-	select SYS_I2C_MXC_I2C2
-	select SYS_I2C_MXC_I2C3
-	select SYS_I2C_MXC_I2C4
+	select SYS_I2C_MXC if !DM_I2C
+	select SYS_I2C_MXC_I2C1 if !DM_I2C
+	select SYS_I2C_MXC_I2C2 if !DM_I2C
+	select SYS_I2C_MXC_I2C3 if !DM_I2C
+	select SYS_I2C_MXC_I2C4 if !DM_I2C
 	imply SCSI
 	imply SCSI_AHCI
 
diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts
index 3fd37beedf..029a8e386b 100644
--- a/arch/arm/dts/fsl-ls1028a-qds.dts
+++ b/arch/arm/dts/fsl-ls1028a-qds.dts
@@ -49,6 +49,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index a8f40855b6..85b4815b2e 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -48,6 +48,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts
index 3d41e3bd44..d39159322a 100644
--- a/arch/arm/dts/fsl-ls1046a-frwy.dts
+++ b/arch/arm/dts/fsl-ls1046a-frwy.dts
@@ -32,3 +32,6 @@
 
 };
 
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
index c95f44fc36..76dc397328 100644
--- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -80,3 +80,7 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index a05c9e9b9e..83e34ab02a 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -43,3 +43,11 @@
 &sata {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/fsl-lx2160a-qds.dts b/arch/arm/dts/fsl-lx2160a-qds.dts
index 34df0f5106..592fd5977e 100644
--- a/arch/arm/dts/fsl-lx2160a-qds.dts
+++ b/arch/arm/dts/fsl-lx2160a-qds.dts
@@ -13,6 +13,9 @@
 / {
 	model = "NXP Layerscape LX2160AQDS Board";
 	compatible = "fsl,lx2160aqds", "fsl,lx2160a";
+	aliases {
+		spi0 = &fspi;
+	};
 };
 
 &esdhc0 {
@@ -46,6 +49,20 @@
 	};
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &sata0 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/fsl-lx2160a-rdb.dts b/arch/arm/dts/fsl-lx2160a-rdb.dts
index e542c6992a..87617ca51f 100644
--- a/arch/arm/dts/fsl-lx2160a-rdb.dts
+++ b/arch/arm/dts/fsl-lx2160a-rdb.dts
@@ -39,6 +39,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <0>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 
 	mt35xu512aba1: flash@1 {
@@ -47,6 +49,8 @@
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <50000000>;
 		reg = <1>;
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
 	};
 };
 
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 84e5cb46e5..333e407b66 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,7 +4,8 @@
 	!defined(CONFIG_ARCH_ROCKCHIP) && !defined(CONFIG_ARCH_LX2160A) && \
 	!defined(CONFIG_ARCH_LS1028A) && !defined(CONFIG_ARCH_LS2080A) && \
 	!defined(CONFIG_ARCH_LS1088A) && !defined(CONFIG_ARCH_ASPEED) && \
-	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_U8500) && \
+	!defined(CONFIG_ARCH_LS1012A) && !defined(CONFIG_ARCH_LS1043A) && \
+	!defined(CONFIG_ARCH_LS1046A) && !defined(CONFIG_ARCH_U8500) && \
 	!defined(CONFIG_CORTINA_PLATFORM)
 #include <asm/arch/gpio.h>
 #endif
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 639353a94b..5a2fa91f6b 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -35,7 +35,7 @@ config SYS_LS_PFE_FW_ADDR
 
 config SYS_LS_PFE_ESBC_ADDR
 	hex "PFE Firmware HDR Addr"
-	default 0x40700000
+	default 0x40640000
 
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index 8c96b962b7..2d4b18cdbc 100644
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -271,11 +272,24 @@ unsigned long get_board_ddr_clk(void)
 	return 66666666;
 }
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -290,8 +304,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -304,16 +320,83 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 void board_retimer_init(void)
 {
 	u8 reg;
+	int bus_num = 0;
 
 	/* Retimer is connected to I2C1_CH7_CH5 */
-	select_i2c_ch_pca9547(I2C_MUX_CH7);
+	select_i2c_ch_pca9547(I2C_MUX_CH7, bus_num);
 	reg = I2C_MUX_CH5;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_SEC,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return;
+	}
+	dm_i2c_write(dev, 0, &reg, 1);
+
+	/* Access to Control/Shared register */
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_RETIMER_ADDR,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return;
+	}
+
+	reg = 0x0;
+	dm_i2c_write(dev, 0xff, &reg, 1);
+
+	/* Read device revision and ID */
+	dm_i2c_read(dev, 1, &reg, 1);
+	debug("Retimer version id = 0x%x\n", reg);
+
+	/* Enable Broadcast. All writes target all channel register sets */
+	reg = 0x0c;
+	dm_i2c_write(dev, 0xff, &reg, 1);
+
+	/* Reset Channel Registers */
+	dm_i2c_read(dev, 0, &reg, 1);
+	reg |= 0x4;
+	dm_i2c_write(dev, 0, &reg, 1);
+
+	/* Enable override divider select and Enable Override Output Mux */
+	dm_i2c_read(dev, 9, &reg, 1);
+	reg |= 0x24;
+	dm_i2c_write(dev, 9, &reg, 1);
+
+	/* Select VCO Divider to full rate (000) */
+	dm_i2c_read(dev, 0x18, &reg, 1);
+	reg &= 0x8f;
+	dm_i2c_write(dev, 0x18, &reg, 1);
+
+	/* Selects active PFD MUX Input as Re-timed Data (001) */
+	dm_i2c_read(dev, 0x1e, &reg, 1);
+	reg &= 0x3f;
+	reg |= 0x20;
+	dm_i2c_write(dev, 0x1e, &reg, 1);
+
+	/* Set data rate as 10.3125 Gbps */
+	reg = 0x0;
+	dm_i2c_write(dev, 0x60, &reg, 1);
+	reg = 0xb2;
+	dm_i2c_write(dev, 0x61, &reg, 1);
+	reg = 0x90;
+	dm_i2c_write(dev, 0x62, &reg, 1);
+	reg = 0xb3;
+	dm_i2c_write(dev, 0x63, &reg, 1);
+	reg = 0xcd;
+	dm_i2c_write(dev, 0x64, &reg, 1);
+#else
 	i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
 
 	/* Access to Control/Shared register */
@@ -360,9 +443,10 @@ void board_retimer_init(void)
 	i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
 	reg = 0xcd;
 	i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+#endif
 
 	/* Return the default channel */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, bus_num);
 }
 
 int board_early_init_f(void)
@@ -375,8 +459,10 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
+#endif
 #endif
 	fsl_lsch2_early_init_f();
 
@@ -457,7 +543,7 @@ int board_init(void)
 	erratum_a010315();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	board_retimer_init();
 
 #ifdef CONFIG_SYS_FSL_SERDES
diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c
index db8b3a5b92..8c0abb63a9 100644
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@@ -36,11 +36,24 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
 
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
+
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -149,7 +162,7 @@ val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
 	sec_init();
 #endif
 
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	return 0;
 }
 
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index aac5d9aa84..cabd7ee648 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -269,11 +270,23 @@ u32 get_lpuart_clk(void)
 }
 #endif
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
 	int ret;
+#ifdef CONFIG_DM_I2C
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       bus_num);
+		return ret;
+	}
+	ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
 	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
 	if (ret) {
 		puts("PCA: failed to select proper channel\n");
 		return ret;
@@ -288,8 +301,10 @@ int dram_init(void)
 	 * When resuming from deep sleep, the I2C channel may not be
 	 * in the default channel. So, switch to the default channel
 	 * before accessing DDR SPD.
+	 *
+	 * PCA9547 mount on I2C1 bus
 	 */
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 	fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
 	defined(CONFIG_SPL_BUILD)
@@ -302,7 +317,7 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 int board_early_init_f(void)
@@ -315,8 +330,10 @@ int board_early_init_f(void)
 	u8 uart;
 #endif
 
+#ifdef CONFIG_SYS_I2C
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
 	i2c_early_init_f();
+#endif
 #endif
 	fsl_lsch2_early_init_f();
 
@@ -394,7 +411,7 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_SYS_FSL_SERDES
 	config_serdes_mux();
diff --git a/board/freescale/lx2160a/lx2160a.c b/board/freescale/lx2160a/lx2160a.c
index 103b0cc659..4b20bb440f 100644
--- a/board/freescale/lx2160a/lx2160a.c
+++ b/board/freescale/lx2160a/lx2160a.c
@@ -29,11 +29,14 @@
 #include "../common/vid.h"
 #include <fsl_immap.h>
 #include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include <asm/gic-v3.h>
+#include <cpu_func.h>
 
 #ifdef CONFIG_EMC2305
 #include "../common/emc2305.h"
 #endif
 
+#define GIC_LPI_SIZE                             0x200000
 #ifdef CONFIG_TARGET_LX2160AQDS
 #define CFG_MUX_I2C_SDHC(reg, value)		((reg & 0x3f) | value)
 #define SET_CFG_MUX1_SDHC1_SDHC(reg)		(reg & 0x3f)
@@ -149,6 +152,7 @@ int board_fix_fdt(void *fdt)
 
 		reg_name = reg_names;
 		remaining_names_len = names_len - (reg_name - reg_names);
+		i = 0;
 		while ((i < ARRAY_SIZE(reg_names_map)) && remaining_names_len) {
 			old_name_len = strlen(reg_names_map[i].old_str);
 			new_name_len = strlen(reg_names_map[i].new_str);
@@ -274,7 +278,14 @@ int i2c_multiplexer_select_vid_channel(u8 channel)
 
 int init_func_vid(void)
 {
-	if (adjust_vdd(0) < 0)
+	int set_vid;
+
+	if (IS_SVR_REV(get_svr(), 1, 0))
+		set_vid = adjust_vdd(800);
+	else
+		set_vid = adjust_vdd(0);
+
+	if (set_vid < 0)
 		printf("core voltage not adjusted\n");
 
 	return 0;
@@ -469,10 +480,16 @@ int config_board_mux(void)
 		reg11 = SET_CFG_MUX3_SDHC1_SPI(reg11, 0x01);
 		QIXIS_WRITE(brdcfg[11], reg11);
 	} else {
-		/*  Routes {SDHC1_DAT4} to SDHC1 adapter slot */
+		/*
+		 * If {SDHC1_DAT4} has been configured to route to SDHC1_VS,
+		 * do not change it.
+		 * Otherwise route {SDHC1_DAT4} to SDHC1 adapter slot.
+		 */
 		reg11 = QIXIS_READ(brdcfg[11]);
-		reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
-		QIXIS_WRITE(brdcfg[11], reg11);
+		if ((reg11 & 0x30) != 0x30) {
+			reg11 = SET_CFG_MUX2_SDHC1_SPI(reg11, 0x00);
+			QIXIS_WRITE(brdcfg[11], reg11);
+		}
 
 		/* - Routes {SDHC1_DAT5, SDHC1_DAT6} to SDHC1 adapter slot.
 		 * {SDHC1_DAT7, SDHC1_DS } to SDHC1 adapter slot.
@@ -627,8 +644,22 @@ void board_quiesce_devices(void)
 }
 #endif
 
-#ifdef CONFIG_OF_BOARD_SETUP
+#ifdef CONFIG_GIC_V3_ITS
+void fdt_fixup_gic_lpi_memory(void *blob, u64 gic_lpi_base)
+{
+	u32 phandle;
+	int err;
+	struct fdt_memory gic_lpi;
 
+	gic_lpi.start = gic_lpi_base;
+	gic_lpi.end = gic_lpi_base + GIC_LPI_SIZE - 1;
+	err = fdtdec_add_reserved_memory(blob, "gic-lpi", &gic_lpi, &phandle);
+	if (err < 0)
+		debug("failed to add reserved memory: %d\n", err);
+}
+#endif
+
+#ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	int i;
@@ -639,6 +670,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 	u64 mc_memory_base = 0;
 	u64 mc_memory_size = 0;
 	u16 total_memory_banks;
+	u64 gic_lpi_base;
 
 	ft_cpu_setup(blob, bd);
 
@@ -658,6 +690,12 @@ int ft_board_setup(void *blob, bd_t *bd)
 		size[i] = gd->bd->bi_dram[i].size;
 	}
 
+#ifdef CONFIG_GIC_V3_ITS
+	gic_lpi_base = gd->arch.resv_ram - GIC_LPI_SIZE;
+	gic_lpi_tables_init(gic_lpi_base, cpu_numcores());
+	fdt_fixup_gic_lpi_memory(blob, gic_lpi_base);
+#endif
+
 #ifdef CONFIG_RESV_RAM
 	/* reduce size if reserved memory is within this bank */
 	if (gd->arch.resv_ram >= base[0] &&
diff --git a/configs/ls1012afrdm_qspi_defconfig b/configs/ls1012afrdm_qspi_defconfig
index 11d0cee39a..1e601484ee 100644
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@@ -5,6 +5,7 @@ CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x300000
 CONFIG_DM_GPIO=y
+CONFIG_BLK=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig
index 2818bdf0d2..420a2f416c 100644
--- a/configs/ls1012afrdm_tfa_defconfig
+++ b/configs/ls1012afrdm_tfa_defconfig
@@ -6,6 +6,7 @@ CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_DM_GPIO=y
+CONFIG_BLK=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index 2f48da82e4..4e937e53ee 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
diff --git a/configs/ls1012ardb_tfa_defconfig b/configs/ls1012ardb_tfa_defconfig
index 4dec4181b7..fdf2324a63 100644
--- a/configs/ls1012ardb_tfa_defconfig
+++ b/configs/ls1012ardb_tfa_defconfig
@@ -40,7 +40,6 @@ CONFIG_DM=y
 CONFIG_SATA_CEVA=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1021aiot_qspi_defconfig b/configs/ls1021aiot_qspi_defconfig
index 7ba0c47a5b..512f775303 100644
--- a/configs/ls1021aiot_qspi_defconfig
+++ b/configs/ls1021aiot_qspi_defconfig
@@ -45,5 +45,6 @@ CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
 CONFIG_FSL_QSPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
index 3ef5520969..7ffd1c3bc6 100644
--- a/configs/ls1028ardb_tfa_defconfig
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -45,7 +45,6 @@ CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
diff --git a/configs/ls1043aqds_defconfig b/configs/ls1043aqds_defconfig
index 2885552ef3..93b86af607 100644
--- a/configs/ls1043aqds_defconfig
+++ b/configs/ls1043aqds_defconfig
@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_lpuart_defconfig b/configs/ls1043aqds_lpuart_defconfig
index 9d9229ac03..f89c2ee3a4 100644
--- a/configs/ls1043aqds_lpuart_defconfig
+++ b/configs/ls1043aqds_lpuart_defconfig
@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig
index c45eaea02a..a169bfef8f 100644
--- a/configs/ls1043aqds_nand_defconfig
+++ b/configs/ls1043aqds_nand_defconfig
@@ -78,3 +78,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_nor_ddr3_defconfig b/configs/ls1043aqds_nor_ddr3_defconfig
index 8d28fe1baf..01d0af30b1 100644
--- a/configs/ls1043aqds_nor_ddr3_defconfig
+++ b/configs/ls1043aqds_nor_ddr3_defconfig
@@ -63,3 +63,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_qspi_defconfig b/configs/ls1043aqds_qspi_defconfig
index 86b2eb56b8..65eff7c40b 100644
--- a/configs/ls1043aqds_qspi_defconfig
+++ b/configs/ls1043aqds_qspi_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig
index bf3f0d0990..c5042a345d 100644
--- a/configs/ls1043aqds_sdcard_ifc_defconfig
+++ b/configs/ls1043aqds_sdcard_ifc_defconfig
@@ -79,3 +79,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig
index 0449469b89..12706a48dc 100644
--- a/configs/ls1043aqds_sdcard_qspi_defconfig
+++ b/configs/ls1043aqds_sdcard_qspi_defconfig
@@ -72,3 +72,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 0ece698350..b7335bcd33 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -63,3 +63,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043aqds_tfa_defconfig b/configs/ls1043aqds_tfa_defconfig
index 24db72a39d..6e594ed07c 100644
--- a/configs/ls1043aqds_tfa_defconfig
+++ b/configs/ls1043aqds_tfa_defconfig
@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 5e030e2586..153a62866f 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index 0676cbccdd..d1e534388b 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -55,3 +55,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index 1f4c5705d5..252c7c8313 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -75,3 +75,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index e7fe2de309..de18aaa063 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -74,3 +74,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 6529c7334c..149b25ffe5 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -74,3 +74,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 228262477c..b386fc668c 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -73,3 +73,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 # CONFIG_SPL_USE_TINY_PRINTF is not set
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 94ca502f3b..36eb0fcff7 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -56,3 +56,5 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index 4154075986..eaddbca79f 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -59,3 +59,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig
index 2c258785d1..616984f7d7 100644
--- a/configs/ls1046afrwy_tfa_defconfig
+++ b/configs/ls1046afrwy_tfa_defconfig
@@ -62,3 +62,5 @@ CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_USB_ETHER_RTL8152=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index 6ea27c7ba4..ed25b7a680 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -60,3 +60,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_defconfig b/configs/ls1046aqds_defconfig
index 04c1176d85..0a50bb14c0 100644
--- a/configs/ls1046aqds_defconfig
+++ b/configs/ls1046aqds_defconfig
@@ -62,3 +62,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_lpuart_defconfig b/configs/ls1046aqds_lpuart_defconfig
index b0a24f297e..17d1685081 100644
--- a/configs/ls1046aqds_lpuart_defconfig
+++ b/configs/ls1046aqds_lpuart_defconfig
@@ -64,3 +64,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig
index 3ffe6a6ef9..0bafcbe168 100644
--- a/configs/ls1046aqds_nand_defconfig
+++ b/configs/ls1046aqds_nand_defconfig
@@ -70,3 +70,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig
index d6253c790a..ff0fd45c9e 100644
--- a/configs/ls1046aqds_qspi_defconfig
+++ b/configs/ls1046aqds_qspi_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig
index fad33163b6..78edb456b8 100644
--- a/configs/ls1046aqds_sdcard_ifc_defconfig
+++ b/configs/ls1046aqds_sdcard_ifc_defconfig
@@ -80,3 +80,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig
index 3571a6f9e9..d085daf384 100644
--- a/configs/ls1046aqds_sdcard_qspi_defconfig
+++ b/configs/ls1046aqds_sdcard_qspi_defconfig
@@ -74,3 +74,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index e173747923..6a9391478b 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -61,3 +61,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig
index 824fc518ca..04e6b2392c 100644
--- a/configs/ls1046aqds_tfa_defconfig
+++ b/configs/ls1046aqds_tfa_defconfig
@@ -71,3 +71,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 768ce7a821..bbb352db31 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -73,3 +73,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index aff9bf81fc..b9c8a8822c 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -55,3 +55,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index b482e73bef..51edada3f8 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -57,3 +57,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 1e2770a9c0..84e059671c 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -77,3 +77,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_SPL_GZIP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 1f5fa8ff03..9954e894da 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -70,3 +70,5 @@ CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index 197090474b..3502809756 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -72,3 +72,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 1dde0ae73b..9e3042b797 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -54,3 +54,5 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_RSA=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 280ca83d42..2f7686bafd 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -58,3 +58,5 @@ CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_DM_I2C=y
+CONFIG_DM_GPIO=y
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 7c3b82700d..319f710382 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -65,6 +65,7 @@ CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_DSPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -73,3 +74,4 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160aqds_tfa_defconfig b/configs/lx2160aqds_tfa_defconfig
index 449b3cbcf1..0161dba9a7 100644
--- a/configs/lx2160aqds_tfa_defconfig
+++ b/configs/lx2160aqds_tfa_defconfig
@@ -4,6 +4,7 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_DM_GPIO=y
 CONFIG_FSPI_AHB_EN_4BYTE=y
@@ -32,6 +33,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-qds"
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
@@ -65,8 +68,10 @@ CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index d1fffb399e..10098ab5a9 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -60,6 +60,7 @@ CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
@@ -68,3 +69,4 @@ CONFIG_RSA=y
 CONFIG_SPL_RSA=y
 CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/configs/lx2160ardb_tfa_defconfig b/configs/lx2160ardb_tfa_defconfig
index 93f3e200c0..c8582aa40d 100644
--- a/configs/lx2160ardb_tfa_defconfig
+++ b/configs/lx2160ardb_tfa_defconfig
@@ -4,6 +4,7 @@ CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
 CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x500000
 CONFIG_DM_GPIO=y
 CONFIG_EMC2305=y
@@ -33,6 +34,8 @@ CONFIG_OF_CONTROL=y
 CONFIG_OF_BOARD_FIXUP=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb"
 CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_ENV_ADDR=0x20500000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 CONFIG_SATA_CEVA=y
@@ -41,7 +44,6 @@ CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_I2C_DEFAULT_BUS_NUMBER=0
 CONFIG_DM_MMC=y
-CONFIG_MMC_HS200_SUPPORT=y
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
@@ -64,8 +66,10 @@ CONFIG_DM_SCSI=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
+CONFIG_GIC_V3_ITS=y
diff --git a/drivers/net/fm/ls1043.c b/drivers/net/fm/ls1043.c
index cd510f2955..ba4da69423 100644
--- a/drivers/net/fm/ls1043.c
+++ b/drivers/net/fm/ls1043.c
@@ -65,12 +65,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (port == FM1_DTSEC3)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
 				FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII) {
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 		}
 	if (port == FM1_DTSEC4)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
 				FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII) {
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 		}
 
 	/* handle SGMII */
diff --git a/drivers/net/fm/ls1046.c b/drivers/net/fm/ls1046.c
index 3617ad93e4..49b540bd30 100644
--- a/drivers/net/fm/ls1046.c
+++ b/drivers/net/fm/ls1046.c
@@ -71,12 +71,12 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	if (port == FM1_DTSEC3)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC1) ==
 				FSL_CHASSIS2_RCWSR13_EC1_DTSEC3_RGMII)
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 
 	if (port == FM1_DTSEC4)
 		if ((rcwsr13 & FSL_CHASSIS2_RCWSR13_EC2) ==
 				FSL_CHASSIS2_RCWSR13_EC2_DTSEC4_RGMII)
-			return PHY_INTERFACE_MODE_RGMII_TXID;
+			return PHY_INTERFACE_MODE_RGMII_ID;
 
 	/* handle SGMII, only MAC 2/5/6/9/10 available */
 	switch (port) {
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 2c499513f9..bed8f14aee 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -83,6 +83,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= IF_MODE_GMII;
 		break;
 	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
 		if_mode |= (IF_MODE_GMII | IF_MODE_RG);
 		break;
@@ -107,6 +109,8 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac,
 		if_mode |= IF_MODE_EN_AUTO;
 
 	if (type == PHY_INTERFACE_MODE_RGMII ||
+	    type == PHY_INTERFACE_MODE_RGMII_ID ||
+	    type == PHY_INTERFACE_MODE_RGMII_RXID ||
 	    type == PHY_INTERFACE_MODE_RGMII_TXID) {
 		if_mode &= ~IF_MODE_EN_AUTO;
 		if_mode &= ~IF_MODE_SETSP_MASK;
diff --git a/drivers/pci/pcie_ecam_generic.c b/drivers/pci/pcie_ecam_generic.c
index c875f3a5b7..890b6a8fb6 100644
--- a/drivers/pci/pcie_ecam_generic.c
+++ b/drivers/pci/pcie_ecam_generic.c
@@ -19,6 +19,8 @@
  */
 struct generic_ecam_pcie {
 	void *cfg_base;
+	pci_size_t size;
+	int first_busno;
 };
 
 /**
@@ -43,7 +45,7 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus,
 	void *addr;
 
 	addr = pcie->cfg_base;
-	addr += PCI_BUS(bdf) << 20;
+	addr += (PCI_BUS(bdf) - pcie->first_busno) << 20;
 	addr += PCI_DEV(bdf) << 15;
 	addr += PCI_FUNC(bdf) << 12;
 	addr += offset;
@@ -52,6 +54,16 @@ static int pci_generic_ecam_conf_address(const struct udevice *bus,
 	return 0;
 }
 
+static bool pci_generic_ecam_addr_valid(const struct udevice *bus,
+					pci_dev_t bdf)
+{
+	struct generic_ecam_pcie *pcie = dev_get_priv(bus);
+	int num_buses = DIV_ROUND_UP(pcie->size, 1 << 16);
+
+	return (PCI_BUS(bdf) >= pcie->first_busno &&
+		PCI_BUS(bdf) < pcie->first_busno + num_buses);
+}
+
 /**
  * pci_generic_ecam_read_config() - Read from configuration space
  * @bus: Pointer to the PCI bus
@@ -68,6 +80,11 @@ static int pci_generic_ecam_read_config(const struct udevice *bus,
 					pci_dev_t bdf, uint offset,
 					ulong *valuep, enum pci_size_t size)
 {
+	if (!pci_generic_ecam_addr_valid(bus, bdf)) {
+		*valuep = pci_get_ff(size);
+		return 0;
+	}
+
 	return pci_generic_mmap_read_config(bus, pci_generic_ecam_conf_address,
 					    bdf, offset, valuep, size);
 }
@@ -88,6 +105,9 @@ static int pci_generic_ecam_write_config(struct udevice *bus, pci_dev_t bdf,
 				    uint offset, ulong value,
 				    enum pci_size_t size)
 {
+	if (!pci_generic_ecam_addr_valid(bus, bdf))
+		return 0;
+
 	return pci_generic_mmap_write_config(bus, pci_generic_ecam_conf_address,
 					     bdf, offset, value, size);
 }
@@ -116,9 +136,17 @@ static int pci_generic_ecam_ofdata_to_platdata(struct udevice *dev)
 		return err;
 	}
 
-	pcie->cfg_base = map_physmem(reg_res.start,
-				     fdt_resource_size(&reg_res),
-				     MAP_NOCACHE);
+	pcie->size = fdt_resource_size(&reg_res);
+	pcie->cfg_base = map_physmem(reg_res.start, pcie->size, MAP_NOCACHE);
+
+	return 0;
+}
+
+static int pci_generic_ecam_probe(struct udevice *dev)
+{
+	struct generic_ecam_pcie *pcie = dev_get_priv(dev);
+
+	pcie->first_busno = dev->seq;
 
 	return 0;
 }
@@ -138,6 +166,7 @@ U_BOOT_DRIVER(pci_generic_ecam) = {
 	.id			= UCLASS_PCI,
 	.of_match		= pci_generic_ecam_ids,
 	.ops			= &pci_generic_ecam_ops,
+	.probe			= pci_generic_ecam_probe,
 	.ofdata_to_platdata	= pci_generic_ecam_ofdata_to_platdata,
 	.priv_auto_alloc_size	= sizeof(struct generic_ecam_pcie),
 };
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index bcddff2d7a..b30f223a5c 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -7,6 +7,7 @@
  * Stefano Babic, DENX Software Engineering, sbabic@denx.de
  *
  * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2019 NXP
  */
 
 #include <common.h>
@@ -21,8 +22,20 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 
 	if (check_reg(p, reg))
 		return -EINVAL;
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+	int ret;
 
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+#else /* Non DM I2C support - will be removed */
 	I2C_SET_BUS(p->bus);
+#endif
 
 	switch (pmic_i2c_tx_num) {
 	case 3:
@@ -53,7 +66,11 @@ int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
 		return -EINVAL;
 	}
 
+#if defined(CONFIG_DM_I2C)
+	return dm_i2c_write(dev, reg, buf, pmic_i2c_tx_num);
+#else
 	return i2c_write(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
 }
 
 int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
@@ -65,9 +82,21 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 	if (check_reg(p, reg))
 		return -EINVAL;
 
-	I2C_SET_BUS(p->bus);
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
 
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+	ret = dm_i2c_read(dev, reg, buf, pmic_i2c_tx_num);
+#else /* Non DM I2C support - will be removed */
+	I2C_SET_BUS(p->bus);
 	ret = i2c_read(pmic_i2c_addr, reg, 1, buf, pmic_i2c_tx_num);
+#endif
 	if (ret)
 		return ret;
 
@@ -100,12 +129,25 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val)
 
 int pmic_probe(struct pmic *p)
 {
-	i2c_set_bus_num(p->bus);
 	debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name);
+#if defined(CONFIG_DM_I2C)
+	struct udevice *dev;
+	int ret;
+
+	ret = i2c_get_chip_for_busnum(p->bus, pmic_i2c_addr,
+				      1, &dev);
+	if (ret) {
+		printf("%s: Cannot find udev for a bus %d\n", __func__,
+		       p->bus);
+		return -ENXIO;
+	}
+#else /* Non DM I2C support - will be removed */
+	i2c_set_bus_num(p->bus);
 	if (i2c_probe(pmic_i2c_addr)) {
 		printf("Can't find PMIC:%s\n", p->name);
 		return -ENODEV;
 	}
+#endif
 
 	return 0;
 }
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index dde4369c97..899dfdbdf1 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -8,6 +8,9 @@
 
 #include "ls1012a_common.h"
 
+#undef CONFIG_SYS_BOARD
+#define CONFIG_SYS_BOARD "ls1012afrwy"
+
 /* Board Rev*/
 #define BOARD_REV_A_B			0x0
 #define BOARD_REV_C			0x00080000
@@ -63,9 +66,9 @@
 	"fdtheader_addr_r=0x80100000\0"		\
 	"kernelheader_addr_r=0x80200000\0"	\
 	"kernelheader_size=0x40000\0"		\
-	"kernel_addr_r=0x96000000\0"		\
+	"kernel_addr_r=0x92000000\0"		\
 	"fdt_addr_r=0x90000000\0"		\
-	"load_addr=0x96000000\0"		\
+	"load_addr=0x92000000\0"		\
 	"kernel_size=0x2800000\0"		\
 	"kernelheader_size=0x40000\0"		\
 	"console=ttyS0,115200\0"		\
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index 1d218aa703..7821e98a27 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -207,12 +207,13 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-"initrd_high=0xffffffff\0"	\
-"fdt_high=0xffffffff\0"
+"initrd_high=0xffffffff\0"
 
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 8bac2d2561..5a2bd754c4 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -460,13 +460,11 @@ unsigned long get_board_ddr_clk(void);
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
 	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
-	"fdt_high=0xffffffff\0"         \
 	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
-	"fdt_high=0xffffffff\0"		\
 	"initrd_high=0xffffffff\0"      \
 	"hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=null\0"
 #endif
@@ -474,6 +472,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h
index 984df6249f..46c60aaf5c 100644
--- a/include/configs/ls1021atsn.h
+++ b/include/configs/ls1021atsn.h
@@ -154,7 +154,6 @@
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0"		\
 	"initrd_high=0xffffffff\0"					\
-	"fdt_high=0xffffffff\0"						\
 	"fdt_addr=0x64f00000\0"						\
 	"kernel_addr=0x61000000\0"					\
 	"kernelheader_addr=0x60800000\0"				\
@@ -216,6 +215,8 @@
 		"bootm $load_addr#$board\0"
 
 /* Miscellaneous configurable options */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
+
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		\
 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 8e2784b14b..a6289850ca 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -297,9 +297,8 @@
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
-	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyLP0,115200 $othbootargs\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"		\
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x65000000\0"	\
 	"scriptaddr=0x80000000\0"	\
@@ -313,7 +312,6 @@
 	"kernel_size=0x2800000\0"	\
 	"kernel_addr_sd=0x8000\0"	\
 	"kernel_size_sd=0x14000\0"	\
-	"$othbootargs\0"		\
 	"othbootargs=cma=64M@0x0-0xb0000000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
@@ -355,9 +353,8 @@
 		"$kernel_size && bootm $load_addr#$board\0"
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS	\
-	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+	"bootargs=root=/dev/ram0 rw console=ttyS0,115200 $othbootargs\0" \
 	"initrd_high=0xffffffff\0"      \
-	"fdt_high=0xffffffff\0"		\
 	"fdt_addr=0x64f00000\0"		\
 	"kernel_addr=0x61000000\0"	\
 	"kernelheader_addr=0x60800000\0"	\
@@ -375,7 +372,6 @@
 	"kernel_size_sd=0x14000\0"	\
 	"kernelhdr_addr_sd=0x4000\0"		\
 	"kernelhdr_size_sd=0x10\0"		\
-	"$othbootargs\0"			\
 	"othbootargs=cma=64M@0x0-0xb0000000\0"	\
 	BOOTENV				\
 	"boot_scripts=ls1021atwr_boot.scr\0"	\
@@ -441,6 +437,7 @@
 /*
  * Miscellaneous configurable options
  */
+#define CONFIG_SYS_BOOTMAPSZ		(256 << 20)
 
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 05b8cf00ee..6905694d10 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #ifndef __L1028A_COMMON_H
@@ -70,96 +70,10 @@
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
 	func(MMC, mmc, 1) \
-	func(USB, usb, 0)
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS		\
-	"board=ls1028ardb\0"			\
-	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
-	"ramdisk_addr=0x800000\0"		\
-	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
-	"fdt_addr=0x00f00000\0"                 \
-	"kernel_addr=0x01000000\0"              \
-	"scriptaddr=0x80000000\0"               \
-	"scripthdraddr=0x80080000\0"		\
-	"fdtheader_addr_r=0x80100000\0"         \
-	"kernelheader_addr_r=0x80200000\0"      \
-	"load_addr=0xa0000000\0"            \
-	"kernel_addr_r=0x81000000\0"            \
-	"fdt_addr_r=0x90000000\0"               \
-	"ramdisk_addr_r=0xa0000000\0"           \
-	"kernel_start=0x1000000\0"		\
-	"kernelheader_start=0x800000\0"		\
-	"kernel_load=0xa0000000\0"		\
-	"kernel_size=0x2800000\0"		\
-	"kernelheader_size=0x40000\0"		\
-	"kernel_addr_sd=0x8000\0"		\
-	"kernel_size_sd=0x14000\0"		\
-	"kernelhdr_addr_sd=0x4000\0"		\
-	"kernelhdr_size_sd=0x10\0"		\
-	"console=ttyS0,115200\0"                \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
-	BOOTENV					\
-	"boot_scripts=ls1028ardb_boot.scr\0"    \
-	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
-	"scan_dev_for_boot_part="               \
-		"part list ${devtype} ${devnum} devplist; "   \
-		"env exists devplist || setenv devplist 1; "  \
-		"for distro_bootpart in ${devplist}; do "     \
-		  "if fstype ${devtype} "                  \
-			"${devnum}:${distro_bootpart} "      \
-			"bootfstype; then "                  \
-			"run scan_dev_for_boot; "            \
-		  "fi; "                                   \
-		"done\0"                                   \
-	"scan_dev_for_boot="				  \
-		"echo Scanning ${devtype} "		  \
-				"${devnum}:${distro_bootpart}...; "  \
-		"for prefix in ${boot_prefixes}; do "	  \
-			"run scan_dev_for_scripts; "	  \
-		"done;"					  \
-		"\0"					  \
-	"boot_a_script="				  \
-		"load ${devtype} ${devnum}:${distro_bootpart} "  \
-			"${scriptaddr} ${prefix}${script}; "    \
-		"env exists secureboot && load ${devtype} "     \
-			"${devnum}:${distro_bootpart} "		\
-			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
-			"&& esbc_validate ${scripthdraddr};"    \
-		"source ${scriptaddr}\0"	  \
-	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
-		"sf probe 0:0 && sf read $load_addr " \
-		"$kernel_start $kernel_size ; env exists secureboot &&" \
-		"sf read $kernelheader_addr_r $kernelheader_start " \
-		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
-		" bootm $load_addr#$board\0" \
-	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
-		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
-		"&& hdp load $load_addr 0x2000\0"			\
-	"sd_bootcmd=echo Trying load from SD ...;" \
-		"mmcinfo; mmc read $load_addr "		\
-		"$kernel_addr_sd $kernel_size_sd && "	\
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
-		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"		\
-	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
-		"mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
-		"&& hdp load $load_addr 0x2000\0"	\
-	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
-		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
-		"$kernel_addr_sd $kernel_size_sd && "	\
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
-		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"			\
-	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
-		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
-		"&& hdp load $load_addr 0x2000\0"
-
 #undef CONFIG_BOOTCOMMAND
 
 #define XSPI_NOR_BOOTCOMMAND	\
diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h
index 982df07bb0..818b994b90 100644
--- a/include/configs/ls1028aqds.h
+++ b/include/configs/ls1028aqds.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #ifndef __LS1028A_QDS_H
@@ -90,8 +90,6 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0" \
 	"ramdisk_addr=0x800000\0" \
 	"ramdisk_size=0x2000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
-	"initrd_high=0xffffffffffffffff\0" \
 	"fdt_addr=0x00f00000\0" \
 	"kernel_addr=0x01000000\0" \
 	"scriptaddr=0x80000000\0" \
@@ -101,15 +99,16 @@
 	"load_addr=0xa0000000\0" \
 	"kernel_addr_r=0x81000000\0" \
 	"fdt_addr_r=0x90000000\0" \
+	"fdt2_addr_r=0x90010000\0" \
 	"ramdisk_addr_r=0xa0000000\0" \
 	"kernel_start=0x1000000\0" \
-	"kernelheader_start=0x800000\0" \
+	"kernelheader_start=0x600000\0" \
 	"kernel_load=0xa0000000\0" \
 	"kernel_size=0x2800000\0" \
 	"kernelheader_size=0x40000\0" \
 	"kernel_addr_sd=0x8000\0" \
 	"kernel_size_sd=0x14000\0" \
-	"kernelhdr_addr_sd=0x4000\0" \
+	"kernelhdr_addr_sd=0x3000\0" \
 	"kernelhdr_size_sd=0x10\0" \
 	"console=ttyS0,115200\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
@@ -141,19 +140,35 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};" \
 		"source ${scriptaddr}\0" \
-	"sd_bootcmd=echo Trying load from SD ..;" \
-		"mmcinfo; mmc read $load_addr " \
-		"$kernel_addr_sd $kernel_size_sd && " \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0; mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd " \
-		" && esbc_validate ${kernelheader_addr_r};" \
-		"bootm $load_addr#$board\0" \
-	"emmc_bootcmd=echo Trying load from EMMC ..;" \
-		"mmcinfo; mmc dev 1; mmc read $load_addr " \
-		"$kernel_addr_sd $kernel_size_sd && " \
-		"env exists secureboot && mmc read $kernelheader_addr_r " \
-		"$kernelhdr_addr_sd $kernelhdr_size_sd " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+		"mmc dev 0;mmcinfo; mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+
 #endif
 #endif /* __LS1028A_QDS_H */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
index a4c3d73d2a..0f289cb078 100644
--- a/include/configs/ls1028ardb.h
+++ b/include/configs/ls1028ardb.h
@@ -72,4 +72,92 @@
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
 
+/* Initial environment variables */
+#ifndef SPL_NO_ENV
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"board=ls1028ardb\0"			\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"bootm_size=0x10000000\0"		\
+	"fdt_addr=0x00f00000\0"                 \
+	"kernel_addr=0x01000000\0"              \
+	"scriptaddr=0x80000000\0"               \
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"         \
+	"kernelheader_addr_r=0x80200000\0"      \
+	"load_addr=0xa0000000\0"            \
+	"kernel_addr_r=0x81000000\0"            \
+	"fdt_addr_r=0x90000000\0"               \
+	"ramdisk_addr_r=0xa0000000\0"           \
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x600000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
+	"kernelhdr_addr_sd=0x3000\0"		\
+	"kernelhdr_size_sd=0x20\0"		\
+	"console=ttyS0,115200\0"                \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1028ardb_boot.scr\0"    \
+	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="               \
+		"part list ${devtype} ${devnum} devplist; "   \
+		"env exists devplist || setenv devplist 1; "  \
+		"for distro_bootpart in ${devplist}; do "     \
+		  "if fstype ${devtype} "                  \
+			"${devnum}:${distro_bootpart} "      \
+			"bootfstype; then "                  \
+			"run scan_dev_for_boot; "            \
+		  "fi; "                                   \
+		"done\0"                                   \
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_bootcmd=echo Trying load from SD ...;" \
+		"mmc dev 0;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"	\
+		"mmc dev 0;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmc dev 1;mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+#endif
 #endif /* __LS1028A_RDB_H */
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index bf24d4036d..985f40412c 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2015 Freescale Semiconductor
+ * Copyright (C) 2019 NXP
  */
 
 #ifndef __LS1043A_COMMON_H
@@ -141,7 +142,17 @@
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
 /* PCIe */
 #ifndef SPL_NO_PCIE
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 3944f87794..e80c2996ef 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -16,6 +16,7 @@
 #define SPL_NO_QSPI
 #define SPL_NO_USB
 #define SPL_NO_SATA
+#undef CONFIG_DM_I2C
 #endif
 #if defined(CONFIG_SPL_BUILD) && \
 	(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
@@ -126,7 +127,17 @@
 #endif
 
 /* I2C */
+#ifndef CONFIG_DM_I2C
 #define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_MXC_I2C4		/* enable I2C bus 4 */
+#else
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0
+#endif
 
 /* PCIe */
 #define CONFIG_PCIE1		/* PCIE controller 1 */
@@ -217,8 +228,7 @@
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"ramdisk_addr=0x800000\0"		\
 	"ramdisk_size=0x2000000\0"		\
-	"fdt_high=0xffffffffffffffff\0"		\
-	"initrd_high=0xffffffffffffffff\0"	\
+	"bootm_size=0x10000000\0"		\
 	"fdt_addr=0x64f00000\0"                 \
 	"kernel_addr=0x65000000\0"              \
 	"scriptaddr=0x80000000\0"               \
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 361c72fc8c..4ac4a8d856 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -443,19 +443,47 @@ unsigned long get_board_ddr_clk(void);
 	"mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
 	"sf read 0x80100000 0xE00000 0x100000;" \
 	"fsl_mc start mc 0x80000000 0x80100000\0"	\
-	"mcmemsize=0x70000000 \0"
-#define QSPI_NOR_BOOTCOMMAND	"sf probe 0:0;" \
-				"sf read 0x80001000 0xd00000 0x100000;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" sf read $kernel_load $kernel_start" \
-				" $kernel_size && bootm $kernel_load"
-#define SD_BOOTCOMMAND		"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
-				" fsl_mc lazyapply dpl 0x80001000 &&" \
-				" mmc read $kernel_load $kernel_start_sd" \
-				" $kernel_size_sd && bootm $kernel_load"
-#define IFC_NOR_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
-				" cp.b $kernel_start $kernel_load" \
-				" $kernel_size && bootm $kernel_load"
+	"mcmemsize=0x70000000 \0"		\
+	"BOARD=ls1088aqds\0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
+	BOOTENV					\
+	"boot_scripts=ls1088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls1088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} " \
+		"${scriptaddr} ${prefix}${script}; "		\
+	"env exists secureboot && load ${devtype} "		\
+		"${devnum}:${distro_bootpart} "			\
+		"${scripthdraddr} ${prefix}${boot_script_hdr}; "\
+		"env exists secureboot "			\
+		"&& esbc_validate ${scripthdraddr};"		\
+		"source ${scriptaddr}\0"			\
+	"qspi_bootcmd=echo Trying load from qspi..; " \
+		"sf probe 0:0; " \
+		"sf read 0x80001000 0xd00000 0x100000; " \
+		"fsl_mc lazyapply dpl 0x80001000 && " \
+		"sf read $kernel_load $kernel_start " \
+		"$kernel_size && bootm $kernel_load#$BOARD\0" \
+	"sd_bootcmd=echo Trying load from sd card..; " \
+		"mmcinfo;mmc read 0x80001000 0x6800 0x800; "\
+		"fsl_mc lazyapply dpl 0x80001000 && " \
+		"mmc read $kernel_load $kernel_start_sd " \
+		"$kernel_size_sd && bootm $kernel_load#$BOARD\0" \
+	"nor_bootcmd=echo Trying load from nor..; " \
+		"fsl_mc lazyapply dpl 0x580d00000 && " \
+		"cp.b $kernel_start $kernel_load " \
+		"$kernel_size && bootm $kernel_load#$BOARD\0"
 #else
 #if defined(CONFIG_QSPI_BOOT)
 #undef CONFIG_EXTRA_ENV_SETTINGS
@@ -510,6 +538,15 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_TFABOOT */
 #endif /* CONFIG_NXP_ESBC */
 
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define IFC_NOR_BOOTCOMMAND "run distro_bootcmd; run nor_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#endif
+
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
 #define	CONFIG_PHYLIB
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 88da69f36f..e93faab9a4 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -383,7 +383,30 @@ unsigned long get_board_ddr_clk(void);
 	"kernelheader_size=0x40000\0"		\
 	"BOARD=ls2088aqds\0" \
 	"mcmemsize=0x70000000 \0" \
+	"scriptaddr=0x80000000\0"		\
+	"scripthdraddr=0x80080000\0"		\
 	IFC_MC_INIT_CMD				\
+	BOOTENV					\
+	"boot_scripts=ls2088aqds_boot.scr\0"	\
+	"boot_script_hdr=hdr_ls2088aqds_bs.out\0"	\
+	"scan_dev_for_boot_part="		\
+		"part list ${devtype} ${devnum} devplist; "	\
+		"env exists devplist || setenv devplist 1; "	\
+		"for distro_bootpart in ${devplist}; do "	\
+			"if fstype ${devtype} "			\
+				"${devnum}:${distro_bootpart} "	\
+				"bootfstype; then "		\
+				"run scan_dev_for_boot; "	\
+			"fi; "					\
+		"done\0"					\
+	"boot_a_script="					\
+		"load ${devtype} ${devnum}:${distro_bootpart} "	\
+			"${scriptaddr} ${prefix}${script}; "	\
+		"env exists secureboot && load ${devtype} "	\
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} "	\
+			"&& esbc_validate ${scripthdraddr};"	\
+		"source ${scriptaddr}\0"			\
 	"nor_bootcmd=echo Trying load from nor..;"		\
 		"cp.b $kernel_addr $load_addr "			\
 		"$kernel_size ; env exists secureboot && "	\
@@ -429,6 +452,13 @@ unsigned long get_board_ddr_clk(void);
 #endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
+#define BOOT_TARGET_DEVICES(func) \
+	func(USB, usb, 0) \
+	func(MMC, mmc, 0) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
 #define SD_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& mmcinfo && mmc read $load_addr 0x3600 0x800 " \
@@ -436,14 +466,14 @@ unsigned long get_board_ddr_clk(void);
 			"env exists mcinitcmd && run mcinitcmd "	\
 			"&& mmc read 0x80d00000 0x6800 0x800 "		\
 			"&& fsl_mc lazyapply dpl 0x80d00000; "		\
-			"run sd_bootcmd; "		\
+			"run distro_bootcmd;run sd_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
 #define IFC_NOR_BOOTCOMMAND						\
 			"env exists mcinitcmd && env exists secureboot "\
 			"&& esbc_validate 0x5806C0000; env exists mcinitcmd "\
 			"&& fsl_mc lazyapply dpl 0x580d00000;"		\
-			"run nor_bootcmd; "		\
+			"run distro_bootcmd;run nor_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 #endif
 
diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h
index 373daebfbc..d47abf6e65 100644
--- a/include/configs/lx2160a_common.h
+++ b/include/configs/lx2160a_common.h
@@ -187,11 +187,15 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
 /* Initial environment variables */
-#define XSPI_MC_INIT_CMD			\
-	"env exists secureboot && "		\
-	"esbc_validate 0x20640000 && "		\
-	"esbc_validate 0x20680000 ;"		\
-	"fsl_mc start mc 0x20a00000 0x20e00000\0"
+#define XSPI_MC_INIT_CMD				\
+	"sf probe 0:0 && "				\
+	"sf read 0x80640000 0x640000 0x80000 && "	\
+	"env exists secureboot && "			\
+	"esbc_validate 0x80640000 && "			\
+	"esbc_validate 0x80680000; "			\
+	"sf read 0x80a00000 0xa00000 0x300000 && "	\
+	"sf read 0x80e00000 0xe00000 0x100000; "	\
+	"fsl_mc start mc 0x80a00000 0x80e00000\0"
 
 #define SD_MC_INIT_CMD				\
 	"mmc read 0x80a00000 0x5000 0x1200;"	\
@@ -249,10 +253,13 @@ unsigned long get_board_ddr_clk(void);
 		"source ${scriptaddr}\0"
 
 #define XSPI_NOR_BOOTCOMMAND						\
-			"env exists mcinitcmd && env exists secureboot "\
-			"&& esbc_validate 0x206C0000; "			\
+			"sf probe 0:0; "				\
+			"sf read 0x806c0000 0x6c0000 0x40000; "		\
+			"env exists mcinitcmd && env exists secureboot"	\
+			" && esbc_validate 0x806c0000; "		\
+			"sf read 0x80d00000 0xd00000 0x100000; "	\
 			"env exists mcinitcmd && "			\
-			"fsl_mc lazyapply dpl 0x20d00000; "		\
+			"fsl_mc lazyapply dpl 0x80d00000; "		\
 			"run distro_bootcmd;run xspi_bootcmd; "		\
 			"env exists secureboot && esbc_halt;"
 
@@ -266,10 +273,22 @@ unsigned long get_board_ddr_clk(void);
 		"run distro_bootcmd;run sd_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 
+#define SD2_BOOTCOMMAND						\
+		"env exists mcinitcmd && mmcinfo; "		\
+		"mmc read 0x80d00000 0x6800 0x800; "		\
+		"env exists mcinitcmd && env exists secureboot "	\
+		" && mmc read 0x80780000 0x3C00 0x20 "		\
+		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
+		"&& fsl_mc lazyapply dpl 0x80d00000;"		\
+		"run distro_bootcmd;run sd2_bootcmd;"		\
+		"env exists secureboot && esbc_halt;"
+
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 0) \
-	func(SCSI, scsi, 0)
+	func(MMC, mmc, 1) \
+	func(SCSI, scsi, 0) \
+	func(DHCP, dhcp, na)
 #include <config_distro_bootcmd.h>
 
 #endif /* __LX2_COMMON_H */
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
index 1eb63d826f..3dd071fa25 100644
--- a/include/configs/lx2160aqds.h
+++ b/include/configs/lx2160aqds.h
@@ -121,7 +121,6 @@ u8 qixis_esdhc_detect_quirk(void);
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	EXTRA_ENV_SETTINGS			\
-	"lx2160aqds_vdd_mv=800\0"		\
 	"boot_scripts=lx2160aqds_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160aqds_bs.out\0"	\
 	"BOARD=lx2160aqds\0"			\
@@ -137,6 +136,13 @@ u8 qixis_esdhc_detect_quirk(void);
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
 
 #include <asm/fsl_secure_boot.h>
diff --git a/include/configs/lx2160ardb.h b/include/configs/lx2160ardb.h
index 82d49e53ab..f54edf356a 100644
--- a/include/configs/lx2160ardb.h
+++ b/include/configs/lx2160ardb.h
@@ -93,7 +93,6 @@
 	EXTRA_ENV_SETTINGS			\
 	"boot_scripts=lx2160ardb_boot.scr\0"	\
 	"boot_script_hdr=hdr_lx2160ardb_bs.out\0"	\
-	"lx2160ardb_vdd_mv=800\0"		\
 	"BOARD=lx2160ardb\0"			\
 	"xspi_bootcmd=echo Trying load from flexspi..;"		\
 		"sf probe 0:0 && sf read $load_addr "		\
@@ -107,6 +106,13 @@
 		"env exists secureboot && mmc read $kernelheader_addr_r "\
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
 		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$BOARD\0"			\
+	"sd2_bootcmd=echo Trying load from emmc card..;"	\
+		"mmc dev 1; mmcinfo; mmc read $load_addr "	\
+		"$kernel_addr_sd $kernel_size_sd ;"		\
+		"env exists secureboot && mmc read $kernelheader_addr_r "\
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "	\
+		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$BOARD\0"
 
 #include <asm/fsl_secure_boot.h>