ARM: da850_am18xxevm: Remove config and references

This board has been abandonded for a while.  I do not have this hardware
and nobody has appeared to notice and/or care that it's orphaned.
Since much of this code is inserted into the da850evm code base, removing
it from support will make da850evm support easier going forward.
This patch removes the da850_am18xxevm_defconfig, README references to this
board and the reference to this board from the MAINTAINERS list.

Signed-off-by: Adam Ford <aford173@gmail.com>
This commit is contained in:
Adam Ford 2019-07-29 08:28:39 -05:00 committed by Tom Rini
parent 75551c8bfc
commit 8dd75d3a8d
3 changed files with 1 additions and 74 deletions

View File

@ -7,10 +7,6 @@ F: configs/da850evm_defconfig
F: configs/da850evm_nand_defconfig
F: configs/da850evm_direct_nor_defconfig
AM18XXEVM BOARD
S: Orphan
F: configs/da850_am18xxevm_defconfig
OMAPL138_LCDK BOARD
M: Peter Howard <phoward@gme.net.au>
S: Maintained

View File

@ -29,9 +29,7 @@ Compilation
===========
The exact build target you need will depend on the board you have. For
Logic PD boards, or other boards which store the ethernet MAC address at
the end of SPI flash, run 'make da850evm'. For boards which store the
ethernet MAC address in the i2c EEPROM located at 0x50, run
'make da850_am18xxevm'. Once this build completes you will have a
the end of SPI flash, run 'make da850evm'. Once this build completes you will have a
u-boot.ais file that needs to be written to the correct persistent
storage.

View File

@ -1,67 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_DAVINCI=y
CONFIG_SYS_TEXT_BASE=0xc1080000
CONFIG_TARGET_DA850EVM=y
CONFIG_MAC_ADDR_IN_EEPROM=y
CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x800
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="DA850_AM18X_EVM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50"
CONFIG_BOOTDELAY=3
CONFIG_MISC_INIT_R=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_TEXT_BASE=0x80000000
CONFIG_SPL_SPI_LOAD=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CRC32_VERIFY=y
# CONFIG_CMD_EEPROM is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_GPIO is not set
# CONFIG_CMD_GPT is not set
# CONFIG_CMD_PART is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_TIME is not set
# CONFIG_CMD_EXT4 is not set
# CONFIG_CMD_FS_GENERIC is not set
CONFIG_CMD_DIAG=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
CONFIG_SPL_OF_PLATDATA=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_DA8XX_GPIO=y
CONFIG_DM_I2C=y
CONFIG_DM_I2C_COMPAT=y
CONFIG_SYS_I2C_DAVINCI=y
CONFIG_MTD_DEVICE=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_DM_ETH=y
CONFIG_MII=y
CONFIG_DRIVER_TI_EMAC=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_DAVINCI_SPI=y
CONFIG_USB=y
CONFIG_DM_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_DA8XX=y
CONFIG_USB_STORAGE=y
# CONFIG_FAT_WRITE is not set