spl: common: Support for USB MSD FAT image loading

Add SPL support to be able to detect a USB Mass Storage device
connected to a USB host.  Once a USB Mass storage device is detected
the SPL will load the u-boot.img from a FAT partition to target address.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
This commit is contained in:
Dan Murphy 2014-01-16 11:23:30 -06:00 committed by Tom Rini
parent 773b5940b5
commit 8cffe5bd0d
8 changed files with 92 additions and 11 deletions

View File

@ -19,6 +19,7 @@
#define BOOT_DEVICE_MMC1 7
#define BOOT_DEVICE_MMC2 8
#define BOOT_DEVICE_SPI 10
#define BOOT_DEVICE_USB 13
#define BOOT_DEVICE_UART 65
#define BOOT_DEVICE_CPGMAC 71
#else
@ -38,9 +39,16 @@
#endif
#define BOOT_DEVICE_MMC2_2 0xFF
#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX)
#if defined(CONFIG_AM33XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
#elif defined(CONFIG_AM43XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#ifdef CONFIG_SPL_USB_SUPPORT
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_USB
#else
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
#endif
#elif defined(CONFIG_TI81XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1

View File

@ -197,6 +197,10 @@ obj-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_attr.o
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_flags.o
obj-$(CONFIG_SPL_ENV_SUPPORT) += env_callback.o
ifdef CONFIG_SPL_USB_HOST_SUPPORT
obj-$(CONFIG_SPL_USB_SUPPORT) += usb.o usb_hub.o
obj-$(CONFIG_USB_STORAGE) += usb_storage.o
endif
ifneq ($(CONFIG_SPL_NET_SUPPORT),y)
obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
obj-$(CONFIG_ENV_IS_IN_MMC) += env_mmc.o

View File

@ -16,5 +16,6 @@ obj-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
obj-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o
obj-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
obj-$(CONFIG_SPL_MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_SPL_USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_SPL_FAT_SUPPORT) += spl_fat.o
endif

View File

@ -204,6 +204,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2)
case BOOT_DEVICE_USBETH:
spl_net_load_image("usb_ether");
break;
#endif
#ifdef CONFIG_SPL_USB_SUPPORT
case BOOT_DEVICE_USB:
spl_usb_load_image();
break;
#endif
default:
debug("SPL: Un-supported Boot Device\n");

View File

@ -28,7 +28,7 @@ static int spl_register_fat_device(block_dev_desc_t *block_dev, int partition)
err = fat_register_device(block_dev, partition);
if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: fat register err - %d\n", err);
printf("%s: fat register err - %d\n", __func__, err);
#endif
hang();
}
@ -46,7 +46,7 @@ int spl_load_image_fat(block_dev_desc_t *block_dev,
struct image_header *header;
err = spl_register_fat_device(block_dev, partition);
if (err <= 0)
if (err)
goto end;
header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
@ -63,8 +63,8 @@ int spl_load_image_fat(block_dev_desc_t *block_dev,
end:
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
if (err <= 0)
printf("spl: error reading image %s, err - %d\n",
filename, err);
printf("%s: error reading image %s, err - %d\n",
__func__, filename, err);
#endif
return (err <= 0);
@ -76,15 +76,15 @@ int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition)
int err;
err = spl_register_fat_device(block_dev, partition);
if (err <= 0)
return -1;
if (err)
return err;
err = file_fat_read(CONFIG_SPL_FAT_LOAD_ARGS_NAME,
(void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
if (err <= 0) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("spl: error reading image %s, err - %d\n",
CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
printf("%s: error reading image %s, err - %d\n",
__func__, CONFIG_SPL_FAT_LOAD_ARGS_NAME, err);
#endif
return -1;
}

58
common/spl/spl_usb.c Normal file
View File

@ -0,0 +1,58 @@
/*
* (C) Copyright 2014
* Texas Instruments, <www.ti.com>
*
* Dan Murphy <dmurphy@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* Derived work from spl_mmc.c
*/
#include <common.h>
#include <spl.h>
#include <asm/u-boot.h>
#include <usb.h>
#include <fat.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_STORAGE
static int usb_stor_curr_dev = -1; /* current device */
#endif
void spl_usb_load_image(void)
{
int err;
block_dev_desc_t *stor_dev;
usb_stop();
err = usb_init();
if (err) {
#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
printf("%s: usb init failed: err - %d\n", __func__, err);
#endif
hang();
}
#ifdef CONFIG_USB_STORAGE
/* try to recognize storage devices immediately */
usb_stor_curr_dev = usb_stor_scan(1);
stor_dev = usb_stor_get_dev(usb_stor_curr_dev);
#endif
debug("boot mode - FAT\n");
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spl_load_image_fat_os(stor_dev,
CONFIG_SYS_USB_FAT_BOOT_PARTITION))
#endif
err = spl_load_image_fat(stor_dev,
CONFIG_SYS_USB_FAT_BOOT_PARTITION,
CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME);
if (err) {
puts("Error loading USB device\n");
hang();
}
}

View File

@ -61,6 +61,9 @@ void spl_spi_load_image(void);
/* Ethernet SPL functions */
void spl_net_load_image(const char *device);
/* USB SPL functions */
void spl_usb_load_image(void);
/* SPL FAT image functions */
int spl_load_image_fat(block_dev_desc_t *block_dev, int partition, const char *filename);
int spl_load_image_fat_os(block_dev_desc_t *block_dev, int partition);

View File

@ -83,6 +83,8 @@ LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
LIBS-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
LIBS-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
LIBS-y += arch/$(ARCH)/imx-common/