Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

This commit is contained in:
Tom Rini 2015-07-31 20:16:21 -04:00
commit 8968b914be
48 changed files with 631 additions and 152 deletions

View File

@ -736,8 +736,12 @@ ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
else
ifneq ($(CONFIG_SECURE_BOOT), y)
# For Secure Boot The Image needs to be signed and Header must also
# be included. So The image has to be built explicitly
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
endif
endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin

View File

@ -1052,6 +1052,17 @@ create_init_ram_area:
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#elif defined(CONFIG_RAMBOOT_PBL) && defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS = 1 for mapping CONFIG_SYS_MONITOR_BASE
* to L3 Address configured by PBL for ISBC code
*/
create_tlb1_entry 15, \
1, BOOKE_PAGESZ_1M, \
CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \
CONFIG_SYS_INIT_L3_ADDR & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \
0, r6
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main

View File

@ -51,11 +51,10 @@ int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
#ifdef CONFIG_SYS_DPAA_FMAN
struct liodn_id_table fman1_liodn_tbl[] = {
SET_FMAN_RX_1G_LIODN(1, 0, 88),
SET_FMAN_RX_10G_TYPE2_LIODN(1, 0, 88),
SET_FMAN_RX_1G_LIODN(1, 1, 89),
SET_FMAN_RX_1G_LIODN(1, 2, 90),
SET_FMAN_RX_1G_LIODN(1, 3, 91),
SET_FMAN_RX_10G_LIODN(1, 0, 94),
};
int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
#endif

View File

@ -214,8 +214,8 @@ static const struct serdes_config serdes3_cfg_tbl[] = {
{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
{5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}},
{7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} },
{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}},
{7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
{10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
@ -266,37 +266,30 @@ static const struct serdes_config serdes4_cfg_tbl[] = {
#elif defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080)
static const struct serdes_config serdes1_cfg_tbl[] = {
/* SerDes 1 */
{1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
XAUI_FM1_MAC9, XAUI_FM1_MAC9,
{1, {NONE, NONE, NONE, NONE,
XAUI_FM1_MAC10, XAUI_FM1_MAC10,
XAUI_FM1_MAC10, XAUI_FM1_MAC10} },
{2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
{2, {NONE, NONE, NONE, NONE,
HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
{4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
{4, {NONE, NONE, NONE, NONE,
HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} },
{27, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
{27, {NONE, NONE, NONE, NONE,
SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
{28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
{28, {NONE, NONE, NONE, NONE,
SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
{35, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
{35, {NONE, NONE, NONE, NONE,
SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
{36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
{36, {NONE, NONE, NONE, NONE,
SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} },
{37, {NONE, NONE, QSGMII_FM1_B, NONE,
{37, {NONE, NONE, NONE, NONE,
NONE, NONE, QSGMII_FM1_A, NONE} },
{38, {NONE, NONE, QSGMII_FM1_B, NONE,
{38, {NONE, NONE, NONE, NONE,
NONE, NONE, QSGMII_FM1_A, NONE} },
{}
};
@ -363,45 +356,45 @@ static const struct serdes_config serdes2_cfg_tbl[] = {
SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} },
{37, {NONE, NONE, QSGMII_FM2_B, NONE,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{38, {NONE, NONE, QSGMII_FM2_B, NONE,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{39, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{45, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{47, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
NONE, QSGMII_FM1_A, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{49, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
XAUI_FM2_MAC9, XAUI_FM2_MAC9,
NONE, NONE, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
XAUI_FM2_MAC9, XAUI_FM2_MAC9,
NONE, NONE, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{51, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
NONE, NONE, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
NONE, NONE, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{53, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
NONE, NONE, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
NONE, NONE, NONE, NONE} },
NONE, NONE, QSGMII_FM2_A, NONE} },
{55, {NONE, XFI_FM1_MAC10,
XFI_FM2_MAC10, NONE,
SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
@ -424,51 +417,51 @@ static const struct serdes_config serdes3_cfg_tbl[] = {
{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
{5, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} },
{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} },
{7, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} },
{9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
{10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} },
{11, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
{11, {NONE, NONE, NONE, NONE,
PCIE2, PCIE2, PCIE2, PCIE2} },
{12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
{12, {NONE, NONE, NONE, NONE,
PCIE2, PCIE2, PCIE2, PCIE2} },
{13, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
PCIE2, PCIE2, PCIE2, PCIE2} },
{14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
PCIE2, PCIE2, PCIE2, PCIE2} },
{15, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
{15, {NONE, NONE, NONE, NONE,
SRIO1, SRIO1, SRIO1, SRIO1} },
{16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
{16, {NONE, NONE, NONE, NONE,
SRIO1, SRIO1, SRIO1, SRIO1} },
{17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
{17, {NONE, NONE, NONE, NONE,
SRIO1, SRIO1, SRIO1, SRIO1} },
{18, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
SRIO1, SRIO1, SRIO1, SRIO1} },
{19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
SRIO1, SRIO1, SRIO1, SRIO1} },
{20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
NONE, NONE, NONE, NONE} },
SRIO1, SRIO1, SRIO1, SRIO1} },
{}
};
static const struct serdes_config serdes4_cfg_tbl[] = {
/* SerDes 4 */
{3, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} },
{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} },
{5, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
{6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
{7, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
{8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} },
{9, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} },
{10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} },
{11, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} },
{12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} },
{13, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
{14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
{15, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
{16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} },
{18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} },
{3, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} },
{4, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, PCIE4, PCIE4} },
{5, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
{6, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
{7, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
{8, {NONE, NONE, NONE, NONE, SRIO2, SRIO2, SRIO2, SRIO2} },
{9, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} },
{10, {NONE, NONE, NONE, NONE, PCIE4, PCIE4, SATA1, SATA2} },
{11, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} },
{12, {NONE, NONE, NONE, NONE, AURORA, AURORA, SATA1, SATA2} },
{13, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
{14, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
{15, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
{16, {NONE, NONE, NONE, NONE, AURORA, AURORA, SRIO2, SRIO2} },
{18, {NONE, NONE, NONE, NONE, AURORA, AURORA, AURORA, AURORA} },
{}
}
;

View File

@ -334,7 +334,7 @@
#elif defined(CONFIG_P1025)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
@ -806,6 +806,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_SFP_VER_3_0
#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\
defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)

View File

@ -145,6 +145,12 @@ extern void fdt_fixup_liodn(void *blob);
FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 16), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_10G_OFFSET) \
/* enetNum is 0, 1, 2... so we + 8 for type-2 10g to get to HW Port ID */
#define SET_FMAN_RX_10G_TYPE2_LIODN(fmNum, enetNum, liodn) \
SET_LIODN_ENTRY_1("fsl,fman-port-10g-rx", liodn, \
FM_PPID_RX_PORT_OFFSET(fmNum, enetNum + 8), \
CONFIG_SYS_FSL_FM##fmNum##_RX##enetNum##_1G_OFFSET) \
/*
* handle both old and new versioned SEC properties:
* "fsl,secX.Y" became "fsl,sec-vX.Y" during development

View File

@ -37,7 +37,9 @@
defined(CONFIG_T2080QDS) || \
defined(CONFIG_T2080RDB) || \
defined(CONFIG_T1040QDS) || \
defined(CONFIG_T104xD4QDS) || \
defined(CONFIG_T104xRDB) || \
defined(CONFIG_T104xD4RDB) || \
defined(CONFIG_PPC_T1023) || \
defined(CONFIG_PPC_T1024)
#define CONFIG_SYS_CPC_REINIT_F
@ -46,6 +48,11 @@
#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000
#endif
#if defined(CONFIG_RAMBOOT_PBL)
#undef CONFIG_SYS_INIT_L3_ADDR
#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000
#endif
#if defined(CONFIG_C29XPCIE)
#define CONFIG_KEY_REVOCATION
#endif
@ -68,6 +75,18 @@
#endif
#ifndef CONFIG_FIT_SIGNATURE
/* If Boot Script is not on NOR and is required to be copied on RAM */
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BS_HDR_ADDR_RAM 0x00010000
#define CONFIG_BS_HDR_ADDR_FLASH 0x00800000
#define CONFIG_BS_HDR_SIZE 0x00002000
#define CONFIG_BS_ADDR_RAM 0x00012000
#define CONFIG_BS_ADDR_FLASH 0x00802000
#define CONFIG_BS_SIZE 0x00001000
#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM
#else
/* The bootscript header address is different for B4860 because the NOR
* mapping is different on B4 due to reduced NOR size.
*/
@ -83,6 +102,8 @@
#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xee020000
#endif
#endif
#include <config_fsl_secboot.h>
#endif

View File

@ -43,6 +43,8 @@ struct fsl_e_tlb_entry tlb_table[] = {
/* TLB 1 */
/* *I*** - Covers boot page */
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
#if !defined(CONFIG_SECURE_BOOT)
/*
* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
* SRAM is at 0xfff00000, it covered the 0xfffff000.
@ -50,6 +52,19 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
#else
/*
* *I*G - L3SRAM. When L3 is used as 1M SRAM, in case of Secure Boot
* the physical address of the SRAM is at CONFIG_SYS_INIT_L3_ADDR,
* and virtual address is CONFIG_SYS_MONITOR_BASE
*/
SET_TLB_ENTRY(1, CONFIG_SYS_MONITOR_BASE & 0xfff00000,
CONFIG_SYS_INIT_L3_ADDR & 0xfff00000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_1M, 1),
#endif
#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
/*
* SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the

View File

@ -28,3 +28,10 @@ F: configs/P5040DS_NAND_defconfig
F: configs/P5040DS_SDCARD_defconfig
F: configs/P5040DS_SPIFLASH_defconfig
F: configs/P5040DS_SECURE_BOOT_defconfig
CORENET_DS_SECURE_BOOT BOARD
M: Aneesh Bansal <aneesh.bansal@freescale.com>
S: Maintained
F: configs/P3041DS_NAND_SECURE_BOOT_defconfig
F: configs/P5020DS_NAND_SECURE_BOOT_defconfig
F: configs/P5040DS_NAND_SECURE_BOOT_defconfig

View File

@ -428,8 +428,13 @@ int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC)
const char *soc_usb_compat = "fsl-usb2-dr";
int err, usb1_off, usb2_off;
int usb_err, usb1_off, usb2_off;
#endif
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
int err;
#endif
ft_cpu_setup(blob, bd);
@ -473,6 +478,7 @@ int ft_board_setup(void *blob, bd_t *bd)
}
#endif
#if defined(CONFIG_P1020RDB_PD) || defined(CONFIG_P1020RDB_PC)
/* Delete USB2 node as it is muxed with eLBC */
usb1_off = fdt_node_offset_by_compatible(blob, -1,
soc_usb_compat);
@ -488,11 +494,12 @@ int ft_board_setup(void *blob, bd_t *bd)
soc_usb_compat);
return usb2_off;
}
err = fdt_del_node(blob, usb2_off);
if (err < 0) {
usb_err = fdt_del_node(blob, usb2_off);
if (usb_err < 0) {
printf("WARNING: could not remove %s\n", soc_usb_compat);
return err;
return usb_err;
}
#endif
return 0;
}

View File

@ -6,7 +6,7 @@
#Configure CPC1 as 256KB SRAM
09010100 00000000
09010104 fffc0007
09010f00 08000000
09010f00 081e000d
09010000 80000000
#Configure LAW for CPC1
09000cd0 00000000

View File

@ -70,6 +70,7 @@ Deep Sleep: yes no
I2C controller: 4 3
DDR: 64-bit 32-bit
IFC: 32-bit 28-bit
Package: 23x23 19x19
T1024RDB board Overview
@ -192,7 +193,7 @@ Software configurations and board settings
on T1024RDB:
set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
on T1023RDB:
set SW1[1:8] = '00010110', SW2[1] = '0', SW3[4] = '0' for NOR boot
set SW1[1:8] = '00010111', SW2[1] = '1', SW3[4] = '0' for NOR boot
Switching between default bank0 and alternate bank4 on NOR flash
To change boot source to vbank4:
@ -200,7 +201,7 @@ Software configurations and board settings
via software: run command 'cpld reset altbank' in u-boot.
via DIP-switch: set SW3[5:7] = '100'
on T1023RDB:
via software: run command 'gpio vbank4' in u-boot.
via software: run command 'switch bank4' in u-boot.
via DIP-switch: set SW3[5:7] = '100'
To change boot source to vbank0:
@ -208,7 +209,7 @@ Software configurations and board settings
via software: run command 'cpld reset' in u-boot.
via DIP-Switch: set SW3[5:7] = '000'
on T1023RDB:
via software: run command 'gpio vbank0' in u-boot.
via software: run command 'switch bank0' in u-boot.
via DIP-switch: set SW3[5:7] = '000'
2. NAND Boot:
@ -219,7 +220,7 @@ Software configurations and board settings
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> nand erase 0 $filesize
=> nand write 1000000 0 $filesize
set SW1[1:8] = '10001000', SW2[1] = '1', SW3[4] = '1' for NAND boot
set SW1[1:8] = '10000010', SW2[1] = '1', SW3[4] = '1' for NAND boot
3. SPI Boot:
a. build PBL image for SPI boot
@ -241,11 +242,14 @@ Software configurations and board settings
$ make
b. program u-boot-with-spl-pbl.bin to SD/MMC card
=> tftp 1000000 u-boot-with-spl-pbl.bin
=> mmc write 1000000 8 0x800
=> mmc write 1000000 8 0x7f0
=> tftp 1000000 fsl_fman_ucode_t1024_xx.bin
=> mmc write 1000000 0x820 80
set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
SW3[3] = '1' for SD card(or 'switch sd' by software)
SW3[3] = '0' for eMMC (or 'switch emmc' by software)
2-stage NAND/SPI/SD boot loader
-------------------------------
@ -292,7 +296,7 @@ Start End Definition Size
0x160000 0x17FFFF FMAN Ucode 128KB
SD Card memory Map on T1024RDB
SD Card memory Map on T102xRDB
----------------------------------------------------
Block #blocks Definition Size
0x008 2048 u-boot img 1MB
@ -313,5 +317,5 @@ Start End Definition Size
0xa00000 0x3FFFFFF rootfs 54MB
For more details, please refer to T1024RDB Reference Manual
For more details, please refer to T1024RDB/T1023RDB User Guide
and Freescale QorIQ SDK Infocenter document.

View File

@ -30,6 +30,30 @@ unsigned long get_board_ddr_clk(void)
return CONFIG_DDR_CLK_FREQ;
}
#if defined(CONFIG_SPL_MMC_BOOT)
#define GPIO1_SD_SEL 0x00020000
int board_mmc_getcd(struct mmc *mmc)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
/* GPIO1_14, 0: eMMC, 1: SD */
val &= GPIO1_SD_SEL;
return val ? -1 : 1;
}
int board_mmc_getwp(struct mmc *mmc)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
val &= GPIO1_SD_SEL;
return val ? -1 : 0;
}
#endif
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, ccb_clk;

View File

@ -4,5 +4,5 @@ aa55aa55 010e0100
#Core/DDR: 1400Mhz/1600MT/s with single source clock
0810000e 00000000 00000000 00000000
3b800003 00000012 e8104000 21000000
00000000 00000000 00000000 00020800
00000000 00000000 00000000 00022800
00000130 04020200 00000000 00000006

View File

@ -6,7 +6,7 @@
#Configure CPC1 as 256KB SRAM
09010100 00000000
09010104 fffc0007
09010f00 08000000
09010f00 081e000d
09010000 80000000
#Configure LAW for CPC1
09000cd0 00000000

View File

@ -20,6 +20,9 @@
#include "t102xrdb.h"
#ifdef CONFIG_T1024RDB
#include "cpld.h"
#elif defined(CONFIG_T1023RDB)
#include <i2c.h>
#include <mmc.h>
#endif
#include "../common/sleep.h"
@ -27,13 +30,14 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_T1023RDB
enum {
GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: EMMC, 1:SD/MMC */
GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */
GPIO1_EMMC_SEL,
GPIO1_VBANK0,
GPIO1_VBANK4 = 0x00008000, /* GPIO1_16/20/22, 100:vBank4 */
GPIO1_VBANK_MASK = 0x00008a00,
GPIO1_DIR_OUTPUT = 0x00028a00,
GPIO1_GET_VAL,
GPIO3_GET_VERSION, /* GPIO3_4/5, 00:RevB, 01: RevC */
GPIO3_BRD_VER_MASK = 0x0c000000,
GPIO3_OFFSET = 0x2000,
I2C_GET_BANK,
I2C_SET_BANK0,
I2C_SET_BANK4,
};
#endif
@ -48,9 +52,11 @@ int checkboard(void)
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
printf("Board: %sRDB, ", cpu->name);
#ifdef CONFIG_T1024RDB
#if defined(CONFIG_T1024RDB)
printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
CPLD_READ(hw_ver), CPLD_READ(sw_ver));
#elif defined(CONFIG_T1023RDB)
printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B');
#endif
printf("boot from ");
@ -73,8 +79,7 @@ int checkboard(void)
#ifdef CONFIG_NAND
puts("NAND\n");
#else
printf("NOR vBank%d\n", (t1023rdb_gpio_ctrl(GPIO1_GET_VAL) &
GPIO1_VBANK4) >> 15 ? 4 : 0);
printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK));
#endif
#endif
@ -196,64 +201,126 @@ int ft_board_setup(void *blob, bd_t *bd)
fdt_fixup_board_enet(blob);
#endif
#ifdef CONFIG_T1023RDB
if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0)
fdt_enable_nor(blob);
#endif
return 0;
}
#ifdef CONFIG_T1023RDB
static u32 t1023rdb_gpio_ctrl(u32 ctrl_type)
/* Enable NOR flash for RevC */
static void fdt_enable_nor(void *blob)
{
ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 gpioval;
int nodeoff = fdt_node_offset_by_compatible(blob, 0, "cfi-flash");
setbits_be32(&pgpio->gpdir, GPIO1_DIR_OUTPUT);
gpioval = in_be32(&pgpio->gpdat);
if (nodeoff >= 0)
fdt_status_okay(blob, nodeoff);
else
printf("WARNING unable to set status for NOR\n");
}
int board_mmc_getcd(struct mmc *mmc)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
/* GPIO1_14, 0: eMMC, 1: SD/MMC */
val &= GPIO1_SD_SEL;
return val ? -1 : 1;
}
int board_mmc_getwp(struct mmc *mmc)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val = in_be32(&pgpio->gpdat);
val &= GPIO1_SD_SEL;
return val ? -1 : 0;
}
static u32 t1023rdb_ctrl(u32 ctrl_type)
{
ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 val, orig_bus = i2c_get_bus_num();
u8 tmp;
switch (ctrl_type) {
case GPIO1_SD_SEL:
gpioval |= GPIO1_SD_SEL;
val = in_be32(&pgpio->gpdat);
val |= GPIO1_SD_SEL;
out_be32(&pgpio->gpdat, val);
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO1_EMMC_SEL:
gpioval &= ~GPIO1_SD_SEL;
val = in_be32(&pgpio->gpdat);
val &= ~GPIO1_SD_SEL;
out_be32(&pgpio->gpdat, val);
setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
break;
case GPIO1_VBANK0:
gpioval &= ~GPIO1_VBANK_MASK;
case GPIO3_GET_VERSION:
pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR
+ GPIO3_OFFSET);
val = in_be32(&pgpio->gpdat);
val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
if (val == 0x3) /* GPIO3_4/5 not used on RevB */
val = 0;
return val;
case I2C_GET_BANK:
i2c_set_bus_num(I2C_PCA6408_BUS_NUM);
i2c_read(I2C_PCA6408_ADDR, 0, 1, &tmp, 1);
tmp &= 0x7;
tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2);
i2c_set_bus_num(orig_bus);
return tmp;
case I2C_SET_BANK0:
i2c_set_bus_num(I2C_PCA6408_BUS_NUM);
tmp = 0x0;
i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
tmp = 0xf8;
i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
/* asserting HRESET_REQ */
out_be32(&gur->rstcr, 0x2);
break;
case GPIO1_VBANK4:
gpioval &= ~GPIO1_VBANK_MASK;
gpioval |= GPIO1_VBANK4;
case I2C_SET_BANK4:
i2c_set_bus_num(I2C_PCA6408_BUS_NUM);
tmp = 0x1;
i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
tmp = 0xf8;
i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
out_be32(&gur->rstcr, 0x2);
break;
case GPIO1_GET_VAL:
return gpioval;
default:
break;
}
out_be32(&pgpio->gpdat, gpioval);
return 0;
}
static int gpio_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
static int switch_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
if (argc < 2)
return CMD_RET_USAGE;
if (!strcmp(argv[1], "vbank0"))
t1023rdb_gpio_ctrl(GPIO1_VBANK0);
else if (!strcmp(argv[1], "vbank4"))
t1023rdb_gpio_ctrl(GPIO1_VBANK4);
if (!strcmp(argv[1], "bank0"))
t1023rdb_ctrl(I2C_SET_BANK0);
else if (!strcmp(argv[1], "bank4") || !strcmp(argv[1], "altbank"))
t1023rdb_ctrl(I2C_SET_BANK4);
else if (!strcmp(argv[1], "sd"))
t1023rdb_gpio_ctrl(GPIO1_SD_SEL);
else if (!strcmp(argv[1], "EMMC"))
t1023rdb_gpio_ctrl(GPIO1_EMMC_SEL);
t1023rdb_ctrl(GPIO1_SD_SEL);
else if (!strcmp(argv[1], "emmc"))
t1023rdb_ctrl(GPIO1_EMMC_SEL);
else
return CMD_RET_USAGE;
return 0;
}
U_BOOT_CMD(
gpio, 2, 0, gpio_cmd,
"for vbank0/vbank4/SD/eMMC switch control in runtime",
"command (e.g. gpio vbank4)"
switch, 2, 0, switch_cmd,
"for bank0/bank4/sd/emmc switch control in runtime",
"command (e.g. switch bank4)"
);
#endif

View File

@ -10,6 +10,7 @@
void fdt_fixup_board_enet(void *blob);
void pci_of_setup(void *blob, bd_t *bd);
#ifdef CONFIG_T1023RDB
static u32 t1023rdb_gpio_ctrl(u32 ctrl_type);
static u32 t1023rdb_ctrl(u32 ctrl_type);
static void fdt_enable_nor(void *blob);
#endif
#endif

View File

@ -6,7 +6,7 @@
#Configure CPC1 as 256KB SRAM
09010100 00000000
09010104 fffc0007
09010f00 08000000
09010f00 081e000d
09010000 80000000
#Configure LAW for CPC1
09000cf0 00000000

View File

@ -6,7 +6,13 @@ F: include/configs/T104xRDB.h
F: configs/T1040RDB_defconfig
F: configs/T1040RDB_NAND_defconfig
F: configs/T1040RDB_SPIFLASH_defconfig
F: configs/T1040D4RDB_defconfig
F: configs/T1040D4RDB_NAND_defconfig
F: configs/T1040D4RDB_SPIFLASH_defconfig
F: configs/T1042RDB_defconfig
F: configs/T1042D4RDB_defconfig
F: configs/T1042D4RDB_NAND_defconfig
F: configs/T1042D4RDB_SPIFLASH_defconfig
F: configs/T1042RDB_PI_defconfig
F: configs/T1042RDB_PI_NAND_defconfig
F: configs/T1042RDB_PI_SPIFLASH_defconfig
@ -15,10 +21,14 @@ T1040RDB_SDCARD BOARD
#M: -
S: Maintained
F: configs/T1040RDB_SDCARD_defconfig
F: configs/T1040D4RDB_SDCARD_defconfig
F: configs/T1042D4RDB_SDCARD_defconfig
F: configs/T1042RDB_PI_SDCARD_defconfig
T1040RDB_SECURE_BOOT BOARD
M: Aneesh Bansal <aneesh.bansal@freescale.com>
S: Maintained
F: configs/T1040RDB_SECURE_BOOT_defconfig
F: configs/T1040D4RDB_SECURE_BOOT_defconfig
F: configs/T1042RDB_SECURE_BOOT_defconfig
F: configs/T1042D4RDB_SECURE_BOOT_defconfig

View File

@ -12,6 +12,17 @@ The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
(a personality of T1040 SoC). The board is similar to T1040RDB but is
designed specially with low power features targeted for Printing Image Market.
The T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
The board is re-designed T1040RDB board with following changes :
- Support of DDR4 memory and some enhancements
The T1042D4RDB is a Freescale reference board that hosts the T1042 SoC.
The board is re-designed T1040RDB board with following changes :
- Support of DDR4 memory
- Support for 0x86 serdes protocol which can support following interfaces
- 2 RGMII's on DTSEC4, DTSEC5
- 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB
-------------------------------------------------------------------------
Board Si Protocol Targeted Market
@ -19,6 +30,8 @@ Board Si Protocol Targeted Market
T1040RDB T1040 0x66 Networking
T1040RDB T1042 0x86 Networking
T1042RDB_PI T1042 0x06 Printing & Imaging
T1040D4RDB T1040 0x66 Networking
T1042D4RDB T1042 0x86 Networking
T1040 SoC Overview
@ -70,7 +83,6 @@ The T1040/T1042 SoC includes the following function and features:
T1040 SoC Personalities
-------------------------
T1022 Personality:
T1022 is a reduced personality of T1040 with less core/clusters.
@ -268,8 +280,13 @@ SPI Flash memory Map on T104xRDB
Please note QE Firmware is only valid for T1040RDB
Switch Settings: (ON is 0, OFF is 1)
===============
Switch Settings for T104xRDB boards: (ON is 0, OFF is 1)
==========================================================
NOR boot SW setting:
SW1: 00010011
SW2: 10111011
SW3: 11100001
NAND boot SW setting:
SW1: 10001000
SW2: 00111011
@ -284,3 +301,67 @@ SD boot SW setting:
SW1: 00100000
SW2: 00111011
SW3: 11100001
Switch Settings for T104xD4RDB boards: (ON is 0, OFF is 1)
=============================================================
NOR boot SW setting:
SW1: 00010011
SW2: 10111001
SW3: 11100001
NAND boot SW setting:
SW1: 10001000
SW2: 00111001
SW3: 11110001
SPI boot SW setting:
SW1: 00100010
SW2: 10111001
SW3: 11100001
SD boot SW setting:
SW1: 00100000
SW2: 00111001
SW3: 11100001
PBL-based image generation
==========================
Changes only the required register bit in in PBI commands.
Provides reference code which might needs some
modification as per requirement.
example:
By default PBI_SRC=14 (which is for IFC-NAND/NOR) in rcw.cfg file
which needs to be changed for SPI and SD.
For SD-boot
==============
1. Set RCW[192:195], PBI_SRC bits as 6 in RCW file (t1040d4_rcw.cfg type files)
example:
RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
Change
66000002 40000002 ec027000 01000000
to
66000002 40000002 6c027000 01000000
2. SD does not support flush so remove flush from pbl, make changes in
tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
with 0x091380c0
For SPI-boot
==============
1. Set RCW[192:195], PBI_SRC bits as 5 in RCW file (t1040d4_rcw.cfg type files)
example:
RCW file: board/freescale/t104xrdb/t1040d4_rcw.cfg
Change
66000002 40000002 ec027000 01000000
to
66000002 40000002 5c027000 01000000
2. SPI does not support flush so remove flush from pbl, make changes in
tools/pblimage.c file, Update value of pbl_end_cmd[0] = 0x09138000
with 0x091380c0

View File

@ -69,7 +69,11 @@ static void cpld_dump_regs(void)
printf("int_status = 0x%02x\n", CPLD_READ(int_status));
printf("flash_ctl_status = 0x%02x\n", CPLD_READ(flash_ctl_status));
printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status));
#if defined(CONFIG_T104XD4RDB)
printf("int_mask = 0x%02x\n", CPLD_READ(int_mask));
#else
printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status));
#endif
printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status));
printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status));
printf("boot_override = 0x%02x\n", CPLD_READ(boot_override));

View File

@ -21,7 +21,11 @@ struct cpld_data {
u8 int_status; /* 0x12 - Interrupt status Register */
u8 flash_ctl_status; /* 0x13 - Flash control and status register */
u8 fan_ctl_status; /* 0x14 - Fan control and status register */
#if defined(CONFIG_T104XD4RDB)
u8 int_mask; /* 0x15 - Interrupt mask Register */
#else
u8 led_ctl_status; /* 0x15 - LED control and status register */
#endif
u8 sfp_ctl_status; /* 0x16 - SFP control and status register */
u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/
u8 boot_override; /* 0x18 - Boot override register */
@ -38,3 +42,5 @@ void cpld_write(unsigned int reg, u8 value);
#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
#define CPLD_WRITE(reg, value)\
cpld_write(offsetof(struct cpld_data, reg), value)
#define MISC_CTL_SG_SEL 0x80
#define MISC_CTL_AURORA_SEL 0x02

View File

@ -75,7 +75,11 @@ found:
* Factors to consider for half-strength driver enable:
* - number of DIMMs installed
*/
#ifdef CONFIG_SYS_FSL_DDR4
popts->half_strength_driver_enable = 1;
#else
popts->half_strength_driver_enable = 0;
#endif
/*
* Write leveling override
*/
@ -91,8 +95,14 @@ found:
popts->zq_en = 1;
/* DHC_EN =1, ODT = 75 Ohm */
#ifdef CONFIG_SYS_FSL_DDR4
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_120OHM);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_120OHM) |
DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
#else
popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
#endif
}
#if defined(CONFIG_DEEP_SLEEP)

View File

@ -28,6 +28,9 @@ static const struct board_specific_parameters udimm0[] = {
* num| hi| rank| clk| wrlvl | wrlvl
* ranks| mhz| GB |adjst| start | ctl2
*/
#ifdef CONFIG_SYS_FSL_DDR4
{2, 1600, 4, 4, 6, 0x07090A0c, 0x0e0f100a},
#elif defined(CONFIG_SYS_FSL_DDR3)
{2, 833, 4, 4, 6, 0x06060607, 0x08080807},
{2, 833, 0, 4, 6, 0x06060607, 0x08080807},
{2, 1350, 4, 4, 7, 0x0708080A, 0x0A0B0C09},
@ -40,10 +43,14 @@ static const struct board_specific_parameters udimm0[] = {
{1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09},
{1, 1666, 4, 4, 7, 0x0808090B, 0x0C0D0E0A},
{1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A},
#else
#error DDR type not defined
#endif
{}
};
#endif
static const struct board_specific_parameters *udimms[] = {
udimm0,
};
#endif

View File

@ -43,9 +43,11 @@ int board_eth_init(bd_t *bis)
int idx = i - FM1_DTSEC1;
switch (fm_info_get_enet_if(i)) {
#ifdef CONFIG_T1040RDB
#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
case PHY_INTERFACE_MODE_SGMII:
/* T1040RDB only supports SGMII on DTSEC3 */
/* T1040RDB & T1040D4RDB only supports SGMII on
* DTSEC3
*/
fm_info_set_phy_address(FM1_DTSEC3,
CONFIG_SYS_SGMII1_PHY_ADDR);
break;
@ -59,6 +61,20 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC3,
CONFIG_SYS_SGMII1_PHY_ADDR);
break;
#endif
#ifdef CONFIG_T1042D4RDB
case PHY_INTERFACE_MODE_SGMII:
/* T1042D4RDB supports SGMII on DTSEC1, DTSEC2
* & DTSEC3
*/
if (FM1_DTSEC1 == i)
phy_addr = CONFIG_SYS_SGMII1_PHY_ADDR;
if (FM1_DTSEC2 == i)
phy_addr = CONFIG_SYS_SGMII2_PHY_ADDR;
if (FM1_DTSEC3 == i)
phy_addr = CONFIG_SYS_SGMII3_PHY_ADDR;
fm_info_set_phy_address(i, phy_addr);
break;
#endif
case PHY_INTERFACE_MODE_RGMII:
if (FM1_DTSEC4 == i)

View File

@ -0,0 +1,7 @@
#PBL preamble and RCW header
aa55aa55 010e0100
# serdes protocol 0x66
0c18000e 0e000000 00000000 00000000
66000002 40000002 ec027000 01000000
00000000 00000000 00000000 00030810
00000000 0342580f 00000000 00000000

View File

@ -0,0 +1,7 @@
#PBL preamble and RCW header
aa55aa55 010e0100
# serdes protocol 0x86
0c18000e 0e000000 00000000 00000000
86000002 40000002 ec027000 01000000
00000000 00000000 00000000 00030810
00000000 0342500f 00000000 00000000

View File

@ -16,7 +16,7 @@
#Configure CPC1 as 256KB SRAM
09010100 00000000
09010104 fffc0007
09010f00 08000000
09010f00 081e000d
09010000 80000000
#Configure LAW for CPC1
09000cd0 00000000

View File

@ -28,17 +28,18 @@ int checkboard(void)
struct cpu_type *cpu = gd->arch.cpu;
u8 sw;
#ifdef CONFIG_T104XD4RDB
printf("Board: %sD4RDB\n", cpu->name);
#else
printf("Board: %sRDB\n", cpu->name);
#endif
printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
CPLD_READ(hw_ver), CPLD_READ(sw_ver));
sw = CPLD_READ(flash_ctl_status);
sw = ((sw & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
if (sw <= 7)
printf("vBank: %d\n", sw);
else
printf("Unsupported Bank=%x\n", sw);
printf("vBank: %d\n", sw);
return 0;
}
@ -91,6 +92,34 @@ int board_early_init_r(void)
int misc_init_r(void)
{
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
u32 srds_s1;
srds_s1 = in_be32(&gur->rcwsr[4]) >> 24;
printf("SERDES Reference : 0x%X\n", srds_s1);
/* select SGMII*/
if (srds_s1 == 0x86)
CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
MISC_CTL_SG_SEL);
/* select SGMII and Aurora*/
if (srds_s1 == 0x8E)
CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL);
#if defined(CONFIG_T1040D4RDB)
/* Mask all CPLD interrupt sources, except QSGMII interrupts */
if (CPLD_READ(sw_ver) < 0x03) {
debug("CPLD SW version 0x%02x doesn't support int_mask\n",
CPLD_READ(sw_ver));
} else {
CPLD_WRITE(int_mask, CPLD_INT_MASK_ALL &
~(CPLD_INT_MASK_QSGMII1 | CPLD_INT_MASK_QSGMII2));
}
#endif
return 0;
}

View File

@ -47,14 +47,8 @@ void cpld_set_altbank(void)
switch (curbank) {
case CPLD_SELECT_BANK0:
altbank = CPLD_SELECT_BANK4;
CPLD_WRITE(vbank, altbank);
override = CPLD_READ(software_on);
CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN);
CPLD_WRITE(sys_reset, CPLD_SYSTEM_RESET);
break;
case CPLD_SELECT_BANK4:
altbank = CPLD_SELECT_BANK0;
altbank = CPLD_SELECT_BANK4;
CPLD_WRITE(vbank, altbank);
override = CPLD_READ(software_on);
CPLD_WRITE(software_on, override | CPLD_BANK_SEL_EN);

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P3041DS=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P5020DS=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,NAND,SECURE_BOOT,SYS_TEXT_BASE=0xFFF40000"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_P5040DS=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,6 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,6 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,6 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1040,T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,6 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,6 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,6 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -0,0 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042D4RDB,T104XD4RDB,SYS_FSL_DDR4"
CONFIG_PPC=y
CONFIG_MPC85xx=y
CONFIG_TARGET_T104XRDB=y
CONFIG_SPI_FLASH=y

View File

@ -119,7 +119,7 @@ B4860QDS Default Settings
Switch Settings
----------------
SW1 OFF [0] OFF [1] OFF [1] OFF [0] OFF [1] OFF [0] OFF [1] OFF [1]
SW1 OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0]
SW2 ON ON ON ON ON ON OFF OFF
SW3 OFF OFF OFF ON OFF OFF ON OFF
SW5 OFF OFF OFF OFF OFF OFF ON ON

View File

@ -55,6 +55,22 @@
/* For secure boot flow, default environment used will be used */
#if defined(CONFIG_SYS_RAMBOOT)
#ifdef CONFIG_BOOTSCRIPT_COPY_RAM
#define CONFIG_BS_COPY_ENV \
"setenv bs_hdr_ram " __stringify(CONFIG_BS_HDR_ADDR_RAM)";" \
"setenv bs_hdr_flash " __stringify(CONFIG_BS_HDR_ADDR_FLASH)";" \
"setenv bs_hdr_size " __stringify(CONFIG_BS_HDR_SIZE)";" \
"setenv bs_ram " __stringify(CONFIG_BS_ADDR_RAM)";" \
"setenv bs_flash " __stringify(CONFIG_BS_ADDR_FLASH)";" \
"setenv bs_size " __stringify(CONFIG_BS_SIZE)";"
#if defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_BS_COPY_CMD \
"nand read $bs_hdr_ram $bs_hdr_flash $bs_hdr_size ;" \
"nand read $bs_ram $bs_flash $bs_size ;"
#endif /* CONFIG_RAMBOOT_NAND */
#endif /* CONFIG_BOOTSCRIPT_COPY_RAM */
#if defined(CONFIG_RAMBOOT_SPIFLASH)
#undef CONFIG_ENV_IS_IN_SPI_FLASH
#elif defined(CONFIG_RAMBOOT_NAND)
@ -68,6 +84,17 @@
#define CONFIG_ENV_IS_NOWHERE
#ifndef CONFIG_BS_COPY_ENV
#define CONFIG_BS_COPY_ENV
#endif
#ifndef CONFIG_BS_COPY_CMD
#define CONFIG_BS_COPY_CMD
#endif
#define CONFIG_SECBOOT_CMD CONFIG_BS_COPY_ENV \
CONFIG_BS_COPY_CMD \
CONFIG_SECBOOT
/*
* We don't want boot delay for secure boot flow
* before autoboot starts
@ -75,7 +102,7 @@
#undef CONFIG_BOOTDELAY
#define CONFIG_BOOTDELAY 0
#undef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND CONFIG_SECBOOT
#define CONFIG_BOOTCOMMAND CONFIG_SECBOOT_CMD
/*
* CONFIG_ZERO_BOOTDELAY_CHECK should not be defined for

View File

@ -11,12 +11,6 @@
#ifndef __T1024RDB_H
#define __T1024RDB_H
#if defined(CONFIG_T1023RDB)
#ifdef CONFIG_SPL
#define CONFIG_SYS_NO_FLASH
#endif
#endif
/* High Level Configuration Options */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_DISPLAY_BOARDINFO
@ -320,7 +314,7 @@ unsigned long get_board_ddr_clk(void);
#if defined(CONFIG_T1024RDB)
#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
#elif defined(CONFIG_T1023RDB)
#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \
CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN)
#endif
#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
@ -395,7 +389,9 @@ unsigned long get_board_ddr_clk(void);
| CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
#elif defined(CONFIG_T1023RDB)
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_RAL_3 /* RAL 3Bytes */ \
#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
| CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
| CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
| CSOR_NAND_RAL_3 /* RAL 3Bytes */ \
| CSOR_NAND_PGS_2K /* Page Size = 2K */ \
| CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \
@ -557,9 +553,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
#define I2C_MUX_PCA_ADDR 0x77
#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
#define I2C_PCA6408_BUS_NUM 1
#define I2C_PCA6408_ADDR 0x20
/* I2C bus multiplexer */
#define I2C_MUX_CH_DEFAULT 0x8
@ -757,8 +752,10 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_DPAA_FMAN
#ifdef CONFIG_T1024RDB
#define CONFIG_QE
#define CONFIG_U_QE
#endif
/* Default address of microcode for the Linux FMan driver */
#if defined(CONFIG_SPIFLASH)
/*

View File

@ -29,6 +29,14 @@
#ifdef CONFIG_T1042RDB
#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
#endif
#ifdef CONFIG_T1040D4RDB
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1040d4_rcw.cfg
#endif
#ifdef CONFIG_T1042D4RDB
#define CONFIG_SYS_FSL_PBL_RCW \
$(SRCTREE)/board/freescale/t104xrdb/t1042d4_rcw.cfg
#endif
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
@ -220,7 +228,9 @@
#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
#define CONFIG_DDR_SPD
#ifndef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDR3
#endif
#define CONFIG_SYS_SPD_BUS_NUM 0
#define SPD_EEPROM_ADDRESS 0x51
@ -278,8 +288,23 @@
#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK0 */
#define CPLD_LBMAP_RESET 0xFF
#define CPLD_LBMAP_SHIFT 0x03
#ifdef CONFIG_T1042RDB_PI
#if defined(CONFIG_T1042RDB_PI)
#define CPLD_DIU_SEL_DFP 0x80
#elif defined(CONFIG_T1042D4RDB)
#define CPLD_DIU_SEL_DFP 0xc0
#endif
#if defined(CONFIG_T1040D4RDB)
#define CPLD_INT_MASK_ALL 0xFF
#define CPLD_INT_MASK_THERM 0x80
#define CPLD_INT_MASK_DVI_DFP 0x40
#define CPLD_INT_MASK_QSGMII1 0x20
#define CPLD_INT_MASK_QSGMII2 0x10
#define CPLD_INT_MASK_SGMI1 0x08
#define CPLD_INT_MASK_SGMI2 0x04
#define CPLD_INT_MASK_TDMR1 0x02
#define CPLD_INT_MASK_TDMR2 0x01
#endif
#define CONFIG_SYS_CPLD_BASE 0xffdf0000
@ -447,7 +472,7 @@
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#ifdef CONFIG_T1042RDB_PI
#if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T1042D4RDB)
/* Video */
#define CONFIG_FSL_DIU_FB
@ -492,11 +517,11 @@
/* I2C bus multiplexer */
#define I2C_MUX_PCA_ADDR 0x70
#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
#define I2C_MUX_CH_DEFAULT 0x8
#endif
#ifdef CONFIG_T1042RDB_PI
#if defined(CONFIG_T1042RDB_PI) || defined(CONFIG_T104XD4RDB)
/* LDI/DVI Encoder for display */
#define CONFIG_SYS_I2C_LDI_ADDR 0x38
#define CONFIG_SYS_I2C_DVI_ADDR 0x75
@ -664,7 +689,7 @@
#define CONFIG_SYS_DPAA_FMAN
#define CONFIG_SYS_DPAA_PME
#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
#define CONFIG_QE
#define CONFIG_U_QE
#endif
@ -693,7 +718,7 @@
#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
#endif
#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
#if defined(CONFIG_T104xRDB) || defined(CONFIG_T104XD4RDB)
#if defined(CONFIG_SPIFLASH)
#define CONFIG_SYS_QE_FW_ADDR 0x130000
#elif defined(CONFIG_SDCARD)
@ -718,17 +743,32 @@
#ifdef CONFIG_FMAN_ENET
#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03
#define CONFIG_SYS_SGMII1_PHY_ADDR 0x03
#elif defined(CONFIG_T1040D4RDB) || defined(CONFIG_T1042D4RDB)
#define CONFIG_SYS_SGMII1_PHY_ADDR 0x02
#define CONFIG_SYS_SGMII2_PHY_ADDR 0x03
#define CONFIG_SYS_SGMII3_PHY_ADDR 0x01
#endif
#ifdef CONFIG_T104XD4RDB
#define CONFIG_SYS_RGMII1_PHY_ADDR 0x04
#define CONFIG_SYS_RGMII2_PHY_ADDR 0x05
#else
#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01
#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02
#endif
#define CONFIG_SYS_RGMII1_PHY_ADDR 0x01
#define CONFIG_SYS_RGMII2_PHY_ADDR 0x02
/* Enable VSC9953 L2 Switch driver on T1040 SoC */
#ifdef CONFIG_T1040RDB
#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
#define CONFIG_VSC9953
#define CONFIG_VSC9953_CMD
#ifdef CONFIG_T1040RDB
#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x04
#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x08
#else
#define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR 0x08
#define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR 0x0c
#endif
#endif
#define CONFIG_MII /* MII PHY management */
@ -836,6 +876,10 @@
#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb"
#elif defined(CONFIG_T1042RDB)
#define FDTFILE "t1042rdb/t1042rdb.dtb"
#elif defined(CONFIG_T1040D4RDB)
#define FDTFILE "t1042rdb/t1040d4rdb.dtb"
#elif defined(CONFIG_T1042D4RDB)
#define FDTFILE "t1042rdb/t1042d4rdb.dtb"
#endif
#ifdef CONFIG_FSL_DIU_FB

View File

@ -16,6 +16,14 @@
#include "../board/freescale/common/ics307_clk.h"
#ifdef CONFIG_RAMBOOT_PBL
#ifdef CONFIG_SECURE_BOOT
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#ifdef CONFIG_NAND
#define CONFIG_RAMBOOT_NAND
#endif
#define CONFIG_BOOTSCRIPT_COPY_RAM
#else
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/corenet_ds/pbi.cfg
@ -29,6 +37,7 @@
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/corenet_ds/rcw_p5040ds.cfg
#endif
#endif
#endif
#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
/* Set 1M boot space */