riscv : serial: use rx watermark to indicate rx data is present

In y-modem transfer mode, tstc/getc fail to check if there is any
data available / received in RX FIFO, and so y-modem transfer never
succeeds. Using receive watermark bit within ip register fixes the
issue.

This patch is based on commit c7392b7bc4e1 ("Use the RX watermark
interrupt pending bit for TSTC") available at[1]

[1] https://github.com/sifive/HiFive_U-Boot/tree/regression

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com>
Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
This commit is contained in:
Sagar Shrikant Kadam 2019-07-09 05:23:44 -07:00 committed by Andes
parent df33f86468
commit 8836384c75

View File

@ -22,6 +22,9 @@ DECLARE_GLOBAL_DATA_PTR;
#define UART_TXCTRL_TXEN 0x1
#define UART_RXCTRL_RXEN 0x1
/* IP register */
#define UART_IP_RXWM 0x2
struct uart_sifive {
u32 txfifo;
u32 rxfifo;
@ -34,7 +37,6 @@ struct uart_sifive {
struct sifive_uart_platdata {
unsigned long clock;
int saved_input_char;
struct uart_sifive *regs;
};
@ -94,7 +96,7 @@ static int _sifive_serial_getc(struct uart_sifive *regs)
return -EAGAIN;
ch &= UART_RXFIFO_DATA;
return (!ch) ? -EAGAIN : ch;
return ch;
}
static int sifive_serial_setbrg(struct udevice *dev, int baudrate)
@ -133,7 +135,6 @@ static int sifive_serial_probe(struct udevice *dev)
if (gd->flags & GD_FLG_RELOC)
return 0;
platdata->saved_input_char = 0;
_sifive_serial_init(platdata->regs);
return 0;
@ -145,12 +146,6 @@ static int sifive_serial_getc(struct udevice *dev)
struct sifive_uart_platdata *platdata = dev_get_platdata(dev);
struct uart_sifive *regs = platdata->regs;
if (platdata->saved_input_char > 0) {
c = platdata->saved_input_char;
platdata->saved_input_char = 0;
return c;
}
while ((c = _sifive_serial_getc(regs)) == -EAGAIN) ;
return c;
@ -171,14 +166,10 @@ static int sifive_serial_pending(struct udevice *dev, bool input)
struct sifive_uart_platdata *platdata = dev_get_platdata(dev);
struct uart_sifive *regs = platdata->regs;
if (input) {
if (platdata->saved_input_char > 0)
return 1;
platdata->saved_input_char = _sifive_serial_getc(regs);
return (platdata->saved_input_char > 0) ? 1 : 0;
} else {
if (input)
return (readl(&regs->ip) & UART_IP_RXWM);
else
return !!(readl(&regs->txfifo) & UART_TXFIFO_FULL);
}
}
static int sifive_serial_ofdata_to_platdata(struct udevice *dev)