i2c: atmel: add i2c driver

Add i2c driver.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Songjun Wu 2016-06-20 13:22:38 +08:00 committed by Andreas Bießmann
parent f4b0df1823
commit 8800e0fa20
4 changed files with 426 additions and 0 deletions

View File

@ -58,6 +58,16 @@ config DM_I2C_GPIO
bindings are supported.
Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
config SYS_I2C_AT91
bool "Atmel I2C driver"
depends on DM_I2C && ARCH_AT91
help
Add support for the Atmel I2C driver. A serious problem is that there
is no documented way to issue repeated START conditions for more than
two messages, as needed to support combined I2C messages. Use the
i2c-gpio driver unless your system can cope with this limitation.
Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
config SYS_I2C_FSL
bool "Freescale I2C bus driver"
depends on DM_I2C

View File

@ -16,6 +16,7 @@ obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
obj-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o
obj-$(CONFIG_SYS_I2C) += i2c_core.o
obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o

338
drivers/i2c/at91_i2c.c Normal file
View File

@ -0,0 +1,338 @@
/*
* Atmel I2C driver.
*
* (C) Copyright 2016 Songjun Wu <songjun.wu@atmel.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/io.h>
#include <common.h>
#include <clk_client.h>
#include <dm.h>
#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
#include <linux/bitops.h>
#include <mach/clk.h>
#include "at91_i2c.h"
DECLARE_GLOBAL_DATA_PTR;
#define I2C_TIMEOUT_MS 100
static int at91_wait_for_xfer(struct at91_i2c_bus *bus, u32 status)
{
struct at91_i2c_regs *reg = bus->regs;
ulong start_time = get_timer(0);
u32 sr;
bus->status = 0;
do {
sr = readl(&reg->sr);
bus->status |= sr;
if (sr & TWI_SR_NACK)
return -EREMOTEIO;
else if (sr & status)
return 0;
} while (get_timer(start_time) < I2C_TIMEOUT_MS);
return -ETIMEDOUT;
}
static int at91_i2c_xfer_msg(struct at91_i2c_bus *bus, struct i2c_msg *msg)
{
struct at91_i2c_regs *reg = bus->regs;
bool is_read = msg->flags & I2C_M_RD;
u32 i;
int ret = 0;
readl(&reg->sr);
if (is_read) {
writel(TWI_CR_START, &reg->cr);
for (i = 0; !ret && i < (msg->len - 1); i++) {
ret = at91_wait_for_xfer(bus, TWI_SR_RXRDY);
msg->buf[i] = readl(&reg->rhr);
}
if (ret)
goto error;
writel(TWI_CR_STOP, &reg->cr);
ret = at91_wait_for_xfer(bus, TWI_SR_RXRDY);
if (ret)
goto error;
msg->buf[i] = readl(&reg->rhr);
} else {
writel(msg->buf[0], &reg->thr);
for (i = 1; !ret && (i < msg->len); i++) {
writel(msg->buf[i], &reg->thr);
ret = at91_wait_for_xfer(bus, TWI_SR_TXRDY);
}
if (ret)
goto error;
writel(TWI_CR_STOP, &reg->cr);
}
if (!ret)
ret = at91_wait_for_xfer(bus, TWI_SR_TXCOMP);
if (ret)
goto error;
if (bus->status & (TWI_SR_OVRE | TWI_SR_UNRE | TWI_SR_LOCK)) {
ret = -EIO;
goto error;
}
return 0;
error:
if (bus->status & TWI_SR_LOCK)
writel(TWI_CR_LOCKCLR, &reg->cr);
return ret;
}
static int at91_i2c_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
{
struct at91_i2c_bus *bus = dev_get_priv(dev);
struct at91_i2c_regs *reg = bus->regs;
struct i2c_msg *m_start = msg;
bool is_read;
u32 int_addr_flag = 0;
int ret = 0;
if (nmsgs == 2) {
int internal_address = 0;
int i;
/* 1st msg is put into the internal address, start with 2nd */
m_start = &msg[1];
/* the max length of internal address is 3 bytes */
if (msg->len > 3)
return -EFAULT;
for (i = 0; i < msg->len; ++i) {
const unsigned addr = msg->buf[msg->len - 1 - i];
internal_address |= addr << (8 * i);
int_addr_flag += TWI_MMR_IADRSZ_1;
}
writel(internal_address, &reg->iadr);
}
is_read = m_start->flags & I2C_M_RD;
writel((m_start->addr << 16) | int_addr_flag |
(is_read ? TWI_MMR_MREAD : 0), &reg->mmr);
ret = at91_i2c_xfer_msg(bus, m_start);
return ret;
}
/*
* Calculate symmetric clock as stated in datasheet:
* twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
*/
static void at91_calc_i2c_clock(struct udevice *dev, int i2c_clk)
{
struct at91_i2c_bus *bus = dev_get_priv(dev);
const struct at91_i2c_pdata *pdata = bus->pdata;
int offset = pdata->clk_offset;
int max_ckdiv = pdata->clk_max_div;
int ckdiv, cdiv, div;
unsigned long src_rate;
src_rate = bus->bus_clk_rate;
div = max(0, (int)DIV_ROUND_UP(src_rate, 2 * i2c_clk) - offset);
ckdiv = fls(div >> 8);
cdiv = div >> ckdiv;
if (ckdiv > max_ckdiv) {
ckdiv = max_ckdiv;
cdiv = 255;
}
bus->speed = DIV_ROUND_UP(src_rate,
(cdiv * (1 << ckdiv) + offset) * 2);
bus->cwgr_val = (ckdiv << 16) | (cdiv << 8) | cdiv;
}
static int at91_i2c_enable_clk(struct udevice *dev)
{
struct at91_i2c_bus *bus = dev_get_priv(dev);
struct udevice *dev_clk;
struct clk clk;
ulong clk_rate;
int periph;
int ret;
ret = clk_get_by_index(dev, 0, &clk);
if (ret)
return -EINVAL;
periph = fdtdec_get_uint(gd->fdt_blob, clk.dev->of_offset, "reg", -1);
if (periph < 0)
return -EINVAL;
dev_clk = dev_get_parent(clk.dev);
ret = clk_request(dev_clk, &clk);
if (ret)
return ret;
clk.id = periph;
ret = clk_enable(&clk);
if (ret)
return ret;
ret = clk_get_by_index(dev_clk, 0, &clk);
if (ret)
return ret;
clk_rate = clk_get_rate(&clk);
if (!clk_rate)
return -ENODEV;
bus->bus_clk_rate = clk_rate;
clk_free(&clk);
return 0;
}
static int at91_i2c_probe(struct udevice *dev, uint chip, uint chip_flags)
{
struct at91_i2c_bus *bus = dev_get_priv(dev);
struct at91_i2c_regs *reg = bus->regs;
int ret;
ret = at91_i2c_enable_clk(dev);
if (ret)
return ret;
writel(TWI_CR_SWRST, &reg->cr);
at91_calc_i2c_clock(dev, bus->clock_frequency);
writel(bus->cwgr_val, &reg->cwgr);
writel(TWI_CR_MSEN, &reg->cr);
writel(TWI_CR_SVDIS, &reg->cr);
return 0;
}
static int at91_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
{
struct at91_i2c_bus *bus = dev_get_priv(dev);
at91_calc_i2c_clock(dev, speed);
writel(bus->cwgr_val, &bus->regs->cwgr);
return 0;
}
int at91_i2c_get_bus_speed(struct udevice *dev)
{
struct at91_i2c_bus *bus = dev_get_priv(dev);
return bus->speed;
}
static int at91_i2c_ofdata_to_platdata(struct udevice *dev)
{
const void *blob = gd->fdt_blob;
struct at91_i2c_bus *bus = dev_get_priv(dev);
int node = dev->of_offset;
bus->regs = (struct at91_i2c_regs *)dev_get_addr(dev);
bus->pdata = (struct at91_i2c_pdata *)dev_get_driver_data(dev);
bus->clock_frequency = fdtdec_get_int(blob, node,
"clock-frequency", 100000);
return 0;
}
static const struct dm_i2c_ops at91_i2c_ops = {
.xfer = at91_i2c_xfer,
.probe_chip = at91_i2c_probe,
.set_bus_speed = at91_i2c_set_bus_speed,
.get_bus_speed = at91_i2c_get_bus_speed,
};
static const struct at91_i2c_pdata at91rm9200_config = {
.clk_max_div = 5,
.clk_offset = 3,
};
static const struct at91_i2c_pdata at91sam9261_config = {
.clk_max_div = 5,
.clk_offset = 4,
};
static const struct at91_i2c_pdata at91sam9260_config = {
.clk_max_div = 7,
.clk_offset = 4,
};
static const struct at91_i2c_pdata at91sam9g20_config = {
.clk_max_div = 7,
.clk_offset = 4,
};
static const struct at91_i2c_pdata at91sam9g10_config = {
.clk_max_div = 7,
.clk_offset = 4,
};
static const struct at91_i2c_pdata at91sam9x5_config = {
.clk_max_div = 7,
.clk_offset = 4,
};
static const struct at91_i2c_pdata sama5d4_config = {
.clk_max_div = 7,
.clk_offset = 4,
};
static const struct at91_i2c_pdata sama5d2_config = {
.clk_max_div = 7,
.clk_offset = 3,
};
static const struct udevice_id at91_i2c_ids[] = {
{ .compatible = "atmel,at91rm9200-i2c", .data = (long)&at91rm9200_config },
{ .compatible = "atmel,at91sam9260-i2c", .data = (long)&at91sam9260_config },
{ .compatible = "atmel,at91sam9261-i2c", .data = (long)&at91sam9261_config },
{ .compatible = "atmel,at91sam9g20-i2c", .data = (long)&at91sam9g20_config },
{ .compatible = "atmel,at91sam9g10-i2c", .data = (long)&at91sam9g10_config },
{ .compatible = "atmel,at91sam9x5-i2c", .data = (long)&at91sam9x5_config },
{ .compatible = "atmel,sama5d4-i2c", .data = (long)&sama5d4_config },
{ .compatible = "atmel,sama5d2-i2c", .data = (long)&sama5d2_config },
{ }
};
U_BOOT_DRIVER(i2c_at91) = {
.name = "i2c_at91",
.id = UCLASS_I2C,
.of_match = at91_i2c_ids,
.ofdata_to_platdata = at91_i2c_ofdata_to_platdata,
.per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
.priv_auto_alloc_size = sizeof(struct at91_i2c_bus),
.ops = &at91_i2c_ops,
};

77
drivers/i2c/at91_i2c.h Normal file
View File

@ -0,0 +1,77 @@
#ifndef _AT91_I2C_H
#define _AT91_I2C_H
#define TWI_CR_START BIT(0) /* Send a Start Condition */
#define TWI_CR_MSEN BIT(2) /* Master Transfer Enable */
#define TWI_CR_STOP BIT(1) /* Send a Stop Condition */
#define TWI_CR_SVDIS BIT(5) /* Slave Transfer Disable */
#define TWI_CR_SWRST BIT(7) /* Software Reset */
#define TWI_CR_ACMEN BIT(16) /* Alternative Command Mode Enable */
#define TWI_CR_ACMDIS BIT(17) /* Alternative Command Mode Disable */
#define TWI_CR_LOCKCLR BIT(26) /* Lock Clear */
#define TWI_MMR_MREAD BIT(12) /* Master Read Direction */
#define TWI_MMR_IADRSZ_1 BIT(8) /* Internal Device Address Size */
#define TWI_SR_TXCOMP BIT(0) /* Transmission Complete */
#define TWI_SR_RXRDY BIT(1) /* Receive Holding Register Ready */
#define TWI_SR_TXRDY BIT(2) /* Transmit Holding Register Ready */
#define TWI_SR_OVRE BIT(6) /* Overrun Error */
#define TWI_SR_UNRE BIT(7) /* Underrun Error */
#define TWI_SR_NACK BIT(8) /* Not Acknowledged */
#define TWI_SR_LOCK BIT(23) /* TWI Lock due to Frame Errors */
#define TWI_ACR_DATAL(len) ((len) & 0xff)
#define TWI_ACR_DIR_READ BIT(8)
#define TWI_CWGR_HOLD_MAX 0x1f
#define TWI_CWGR_HOLD(x) (((x) & TWI_CWGR_HOLD_MAX) << 24)
struct at91_i2c_regs {
u32 cr;
u32 mmr;
u32 smr;
u32 iadr;
u32 cwgr;
u32 rev_0[3];
u32 sr;
u32 ier;
u32 idr;
u32 imr;
u32 rhr;
u32 thr;
u32 smbtr;
u32 rev_1;
u32 acr;
u32 filtr;
u32 rev_2;
u32 swmr;
u32 fmr;
u32 flr;
u32 rev_3;
u32 fsr;
u32 fier;
u32 fidr;
u32 fimr;
u32 rev_4[29];
u32 wpmr;
u32 wpsr;
u32 rev_5[6];
};
struct at91_i2c_pdata {
unsigned clk_max_div;
unsigned clk_offset;
};
struct at91_i2c_bus {
struct at91_i2c_regs *regs;
u32 status;
ulong bus_clk_rate;
u32 clock_frequency;
u32 speed;
u32 cwgr_val;
const struct at91_i2c_pdata *pdata;
};
#endif