From 82d9c9ec29a1bec1b03ba616425ebaed231072c8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Wed, 1 Nov 2006 01:34:29 +0100 Subject: [PATCH] Changed MarelV38B board make target to lowercase. Config file cleanup. --- Makefile | 2 +- include/configs/{V38B.h => v38b.h} | 191 +++++++++++++---------------- 2 files changed, 84 insertions(+), 109 deletions(-) rename include/configs/{V38B.h => v38b.h} (63%) diff --git a/Makefile b/Makefile index 62dafc5ed9..ca35dc1586 100644 --- a/Makefile +++ b/Makefile @@ -412,7 +412,7 @@ icecube_5100_config: unconfig @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube v38b_config: unconfig - @./mkconfig -a V38B ppc mpc5xxx v38b + @./mkconfig -a v38b ppc mpc5xxx v38b inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 diff --git a/include/configs/V38B.h b/include/configs/v38b.h similarity index 63% rename from include/configs/V38B.h rename to include/configs/v38b.h index 8eea504742..cf2d031c9f 100644 --- a/include/configs/V38B.h +++ b/include/configs/v38b.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering, + * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering, * wd@denx.de. * * See file CREDITS for list of people who contributed to this project. @@ -11,7 +11,7 @@ * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License along @@ -22,51 +22,41 @@ #ifndef __CONFIG_H #define __CONFIG_H -#if 0 -#define DEBUG 0xFFF -#endif - -#if 0 -#define DEBUG 0x01 -#endif - /* * High Level Configuration Options * (easy to change) -*/ + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ +#define CONFIG_V38B 1 /* ...on V38B board */ +#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_V38B 1 /* ... on V38B board */ -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ +#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ -#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ -#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ -#define CONFIG_HW_WATCHDOG 1 /* has watchdog */ +#define CONFIG_HW_WATCHDOG 1 /* has watchdog */ #define CONFIG_NETCONSOLE 1 -#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */ +#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ -#define CFG_XLB_PIPELINING 1 /* gives better performance */ +#define CFG_XLB_PIPELINING 1 /* gives better performance */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - /* * DDR */ @@ -79,7 +69,6 @@ #define SDRAM_CONFIG2 0x47770000 #define SDRAM_TAPDELAY 0x10000000 - /* * PCI - no suport */ @@ -96,13 +85,13 @@ */ #define CONFIG_USB_OHCI #define CONFIG_USB_STORAGE - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 /* * Supported commands */ -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_FAT | \ CFG_CMD_I2C | \ CFG_CMD_IDE | \ @@ -112,53 +101,63 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_MII | \ - CFG_CMD_SDRAMi | \ + CFG_CMD_SDRAMi | \ CFG_CMD_DATE | \ CFG_CMD_USB | \ CFG_CMD_FAT) +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include /* * Boot low with 16 MB Flash */ -# define CFG_LOWBOOT 1 -# define CFG_LOWBOOT16 1 +#define CFG_LOWBOOT 1 +#define CFG_LOWBOOT16 1 /* * Autobooting */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -#define CONFIG_PREBOOT "echo;" \ +#define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" -#undef CONFIG_BOOTARGS +#undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "devno=5\0" \ - "hostname=V38B_$(devno)\0" \ - "ipaddr=10.100.99.$(devno)\0" \ - "netmask=255.255.0.0\0" \ - "serverip=10.100.10.90\0" \ - "gatewayip=10.100.254.254\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=mpc5200/uImage\0" \ "bootcmd=run net_nfs\0" \ + "bootdelay=3\0" \ + "baudrate=115200\0" \ + "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ + "filesystem over NFS; echo\0" \ + "netdev=eth0\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):" \ "$(netmask):$(hostname):$(netdev):off panic=1\0" \ "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ "flash_self=run ramargs addip;bootm $(kernel_addr) " \ "$(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs " \ - "addip;bootm\0" \ + "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=$(serverip):$(rootpath)\0" \ + "hostname=v38b\0" \ + "ethact=FEC ETHERNET\0" \ + "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ + "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \ + "cp.b 200000 ff000000 $(filesize);" \ + "prot on ff000000 ff03ffff\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.18\0" \ + "serverip=192.168.1.1\0" \ + "ethaddr=00:e0:ee:00:05:2e\0" \ + "bootfile=/tftpboot/v38b/uImage\0" \ + "u-boot=/tftpboot/v38b/u-boot.bin\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -169,13 +168,13 @@ */ #undef CFG_IPBSPEED_133 /* define for 133MHz speed */ #endif + /* * I2C configuration */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ #define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ #define CFG_I2C_SLAVE 0x7F /* @@ -196,7 +195,7 @@ */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CFG_FLASH_CFI_AMD_RESET 1 +#define CFG_FLASH_CFI_AMD_RESET 1 #define CFG_FLASH_BASE 0xFF000000 #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } @@ -224,19 +223,18 @@ #define CFG_INIT_RAM_ADDR MPC5XXX_SRAM #define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ - #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_BASE TEXT_BASE #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) # define CFG_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */ /* * Ethernet configuration @@ -253,19 +251,19 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ #define CFG_LOAD_ADDR 0x100000 /* default load address */ @@ -274,14 +272,8 @@ /* * Various low-level settings */ -#if defined(CONFIG_MPC5200) #define CFG_HID0_INIT HID0_ICE | HID0_ICFI #define CFG_HID0_FINAL HID0_ICE -#else -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL 0 -#endif - #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE @@ -294,55 +286,39 @@ #define CFG_RESET_ADDRESS 0xff000000 -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- +/* + * IDE/ATA (supports IDE harddisk) */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 +#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_RESET /* reset for ide supported */ #define CONFIG_IDE_PREINIT -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ #define CFG_ATA_IDE0_OFFSET 0x0000 #define CFG_ATA_BASE_ADDR MPC5XXX_ATA -/* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET (0x0060) +#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */ -/* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */ -/* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET (0x005C) +#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */ -/* Interval between registers */ -#define CFG_ATA_STRIDE 4 +#define CFG_ATA_STRIDE 4 /* Interval between registers */ -/* Status LED */ - -#define CONFIG_STATUS_LED /* Status LED enabled */ -#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ - -#define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */ +/* + * Status LED + */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */ +#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ #ifndef __ASSEMBLY__ -/* LEDs */ typedef unsigned int led_id_t; #define __led_toggle(_msk) \ @@ -359,10 +335,9 @@ typedef unsigned int led_id_t; } while(0) #define __led_init(_msk, st) \ - { \ + do { \ *((volatile long *) (CFG_LED_BASE)) |= 0x34; \ - } - -#endif + } while(0) +#endif /* __ASSEMBLY__ */ #endif /* __CONFIG_H */