ARM: uniphier: enable distro boot

Switch to the distro boot for UniPhier platform.

 - Remove the environment vairalbes used to load images from raw
   block devices.

 - Keep the command to download images via tftp.  This will be
   useful to boot the kernel when no valid kernel image is ready
   yet in the file system.

 - Use root.cpio.gz instead of root.cpio.uboot because we always know
   the file size of the init ramdisk; it is loaded via either a file
   system or network.

 - Rename fit_addr_r to kernel_addr_r, which the distro command
   checks to get the load address of FIT image.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit is contained in:
Masahiro Yamada 2018-07-20 21:47:18 +09:00
parent ae7a0d5b66
commit 7ef5b1e7ed
4 changed files with 100 additions and 48 deletions

View File

@ -1234,6 +1234,7 @@ config ARCH_UNIPHIER
select SPL_OF_CONTROL if SPL
select SPL_PINCTRL if SPL
select SUPPORT_SPL
imply DISTRO_DEFAULTS
imply FAT_WRITE
help
Support for UniPhier SoC family developed by Socionext Inc.

View File

@ -66,20 +66,20 @@ int board_late_init(void)
switch (uniphier_boot_device_raw()) {
case BOOT_DEVICE_MMC1:
printf("eMMC Boot");
env_set("bootmode", "emmcboot");
env_set("bootcmd", "run bootcmd_mmc0; run distro_bootcmd");
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot");
env_set("bootmode", "nandboot");
env_set("bootcmd", "run bootcmd_ubifs0; run distro_bootcmd");
nand_denali_wp_disable();
break;
case BOOT_DEVICE_NOR:
printf("NOR Boot");
env_set("bootmode", "norboot");
env_set("bootcmd", "run tftpboot; run distro_bootcmd");
break;
case BOOT_DEVICE_USB:
printf("USB Boot");
env_set("bootmode", "usbboot");
env_set("bootcmd", "run bootcmd_usb0; run distro_bootcmd");
break;
default:
printf("Unknown");

View File

@ -332,6 +332,61 @@ for kernel, DTB, and Init ramdisk.
If they are not displayed, the Verified Boot is not working.
Deployment for Distro Boot
--------------------------
UniPhier SoC family boot the kernel in a generic manner as described in
doc/README.distro .
To boot the kernel, you need to deploy necesssary components to a file
system on one of your block devices (eMMC, NAND, USB drive, etc.).
The components depend on the kernel image format.
[1] Bare images
- kernel
- init ramdisk
- device tree blob
- boot configuration file (extlinux.conf)
Here is an exmple of the configuration file.
-------------------->8--------------------
menu title UniPhier Boot Options.
timeout 50
default UniPhier
label UniPhier
kernel ../Image
initrd ../rootfs.cpio.gz
fdtdir ..
-------------------->8--------------------
Then, write 'Image', 'rootfs.cpio.gz', 'uniphier-ld20-ref.dtb' (DTB depends on
your board), and 'extlinux/extlinux.conf' to the file system.
[2] FIT
- FIT blob
- boot configuration file (extlinux.conf)
-------------------->8--------------------
menu title UniPhier Boot Options.
timeout 50
default UniPhier
label UniPhier
kernel ../fitImage
-------------------->8--------------------
Since the init ramdisk and DTB are contained in the FIT blob,
you do not need to describe them in the configuration file.
Write 'fitImage' and 'extlinux/extlinux.conf' to the file system.
UniPhier specific commands
--------------------------

View File

@ -10,6 +10,35 @@
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
#ifndef CONFIG_SPL_BUILD
#include <config_distro_bootcmd.h>
#ifdef CONFIG_CMD_MMC
#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
#else
#define BOOT_TARGET_DEVICE_MMC(func)
#endif
#ifdef CONFIG_CMD_UBIFS
#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
#else
#define BOOT_TARGET_DEVICE_UBIFS(func)
#endif
#ifdef CONFIG_CMD_USB
#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_DEVICE_USB(func)
#endif
#define BOOT_TARGET_DEVICES(func) \
BOOT_TARGET_DEVICE_MMC(func) \
BOOT_TARGET_DEVICE_UBIFS(func) \
BOOT_TARGET_DEVICE_USB(func)
#else
#define BOOTENV
#endif
#define CONFIG_ARMV7_PSCI_1_0
/*-----------------------------------------------------------------------
@ -98,8 +127,6 @@
"third_image=u-boot.bin\0"
#endif
#define CONFIG_BOOTCOMMAND "run $bootmode"
#define CONFIG_ROOTPATH "/nfs/root/path"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs $bootargs root=/dev/nfs rw " \
@ -110,64 +137,31 @@
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
#define LINUXBOOT_ENV_SETTINGS \
"fit_addr=0x00100000\0" \
"fit_addr_r=0x85100000\0" \
"fit_size=0x00f00000\0" \
"norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
"bootm $fit_addr\0" \
"nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
"bootm $fit_addr_r\0" \
"tftpboot=tftpboot $fit_addr_r $bootfile &&" \
"bootm $fit_addr_r\0" \
"kernel_addr_r=0x85100000\0" \
"tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
"bootm $kernel_addr_r\0" \
"__nfsboot=run tftpboot\0"
#else
#ifdef CONFIG_ARM64
#define CONFIG_BOOTFILE "Image.gz"
#define CONFIG_BOOTFILE "Image"
#define LINUXBOOT_CMD "booti"
#define KERNEL_ADDR_LOAD "kernel_addr_load=0x85200000\0"
#define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
#else
#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_CMD "bootz"
#define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0"
#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
#endif
#define LINUXBOOT_ENV_SETTINGS \
"fdt_addr=0x00100000\0" \
"fdt_addr_r=0x85100000\0" \
"fdt_size=0x00008000\0" \
"kernel_addr=0x00200000\0" \
KERNEL_ADDR_LOAD \
KERNEL_ADDR_R \
"kernel_size=0x00e00000\0" \
"ramdisk_addr=0x01000000\0" \
"ramdisk_addr_r=0x86000000\0" \
"ramdisk_size=0x00800000\0" \
"ramdisk_file=rootfs.cpio.uboot\0" \
"ramdisk_file=rootfs.cpio.gz\0" \
"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
"if test $kernel_addr_load = $kernel_addr_r; then " \
"true; " \
"else " \
"unzip $kernel_addr_load $kernel_addr_r; " \
"fi && " \
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
"norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \
"setexpr kernel_size_div4 $kernel_size / 4 && " \
"cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \
"setexpr ramdisk_addr_nor $nor_base + $ramdisk_addr && " \
"setexpr ramdisk_size_div4 $ramdisk_size / 4 && " \
"cp $ramdisk_addr_nor $ramdisk_addr_r $ramdisk_size_div4 && " \
"setexpr fdt_addr_nor $nor_base + $fdt_addr && " \
"setexpr fdt_size_div4 $fdt_size / 4 && " \
"cp $fdt_addr_nor $fdt_addr_r $fdt_size_div4 && " \
"run boot_common\0" \
"nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \
"nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
"nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
"run boot_common\0" \
"tftpboot=tftpboot $kernel_addr_load $bootfile && " \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"tftpboot=tftpboot $kernel_addr_r $bootfile && " \
"tftpboot $fdt_addr_r $fdtfile &&" \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
"setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
"run boot_common\0" \
"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
"tftpboot $fdt_addr_r $fdtfile &&" \
@ -178,6 +172,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"initrd_high=0xffffffffffffffff\0" \
"scriptaddr=0x85000000\0" \
"nor_base=0x42000000\0" \
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
"tftpboot $tmp_addr $second_image && " \
@ -201,7 +196,8 @@
"tftpboot $third_image && " \
"usb write $loadaddr 100 f00\0" \
BOOT_IMAGES \
LINUXBOOT_ENV_SETTINGS
LINUXBOOT_ENV_SETTINGS \
BOOTENV
#define CONFIG_SYS_BOOTMAPSZ 0x20000000