drivers: spi: Add SPI controller driver for Octeon

Adds support for SPI controllers found on Octeon II/III and Octeon TX
TX2 SoC platforms.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Suneel Garapati <sgarapati@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Chandrakala Chavva <cchavva@marvell.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
This commit is contained in:
Suneel Garapati 2020-07-30 13:56:18 +02:00 committed by Daniel Schwierzeck
parent a078c65172
commit 7853cc0598
3 changed files with 622 additions and 0 deletions

View File

@ -240,6 +240,14 @@ config NXP_FSPI
Enable the NXP FlexSPI (FSPI) driver. This driver can be used to
access the SPI NOR flash on platforms embedding this NXP IP core.
config OCTEON_SPI
bool "Octeon SPI driver"
depends on DM_PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
help
Enable the Octeon SPI driver. This driver can be used to
access the SPI NOR flash on Octeon II/III and OcteonTX/TX2
SoC platforms.
config OMAP3_SPI
bool "McSPI driver for OMAP"
help

View File

@ -43,6 +43,7 @@ obj-$(CONFIG_MXC_SPI) += mxc_spi.o
obj-$(CONFIG_MXS_SPI) += mxs_spi.o
obj-$(CONFIG_NXP_FSPI) += nxp_fspi.o
obj-$(CONFIG_ATCSPI200_SPI) += atcspi200_spi.o
obj-$(CONFIG_OCTEON_SPI) += octeon_spi.o
obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
obj-$(CONFIG_PIC32_SPI) += pic32_spi.o
obj-$(CONFIG_PL022_SPI) += pl022_spi.o

613
drivers/spi/octeon_spi.c Normal file
View File

@ -0,0 +1,613 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Marvell International Ltd.
*/
#include <clk.h>
#include <dm.h>
#include <malloc.h>
#include <spi.h>
#include <spi-mem.h>
#include <watchdog.h>
#include <asm/io.h>
#include <asm/unaligned.h>
#include <linux/bitfield.h>
#include <linux/compat.h>
#include <linux/delay.h>
#define OCTEON_SPI_MAX_BYTES 9
#define OCTEON_SPI_MAX_CLOCK_HZ 50000000
#define OCTEON_SPI_NUM_CS 4
#define OCTEON_SPI_CS_VALID(cs) ((cs) < OCTEON_SPI_NUM_CS)
#define MPI_CFG 0x0000
#define MPI_STS 0x0008
#define MPI_TX 0x0010
#define MPI_XMIT 0x0018
#define MPI_WIDE_DAT 0x0040
#define MPI_IO_CTL 0x0048
#define MPI_DAT(X) (0x0080 + ((X) << 3))
#define MPI_WIDE_BUF(X) (0x0800 + ((X) << 3))
#define MPI_CYA_CFG 0x1000
#define MPI_CLKEN 0x1080
#define MPI_CFG_ENABLE BIT_ULL(0)
#define MPI_CFG_IDLELO BIT_ULL(1)
#define MPI_CFG_CLK_CONT BIT_ULL(2)
#define MPI_CFG_WIREOR BIT_ULL(3)
#define MPI_CFG_LSBFIRST BIT_ULL(4)
#define MPI_CFG_CS_STICKY BIT_ULL(5)
#define MPI_CFG_CSHI BIT_ULL(7)
#define MPI_CFG_IDLECLKS GENMASK_ULL(9, 8)
#define MPI_CFG_TRITX BIT_ULL(10)
#define MPI_CFG_CSLATE BIT_ULL(11)
#define MPI_CFG_CSENA0 BIT_ULL(12)
#define MPI_CFG_CSENA1 BIT_ULL(13)
#define MPI_CFG_CSENA2 BIT_ULL(14)
#define MPI_CFG_CSENA3 BIT_ULL(15)
#define MPI_CFG_CLKDIV GENMASK_ULL(28, 16)
#define MPI_CFG_LEGACY_DIS BIT_ULL(31)
#define MPI_CFG_IOMODE GENMASK_ULL(35, 34)
#define MPI_CFG_TB100_EN BIT_ULL(49)
#define MPI_DAT_DATA GENMASK_ULL(7, 0)
#define MPI_STS_BUSY BIT_ULL(0)
#define MPI_STS_MPI_INTR BIT_ULL(1)
#define MPI_STS_RXNUM GENMASK_ULL(12, 8)
#define MPI_TX_TOTNUM GENMASK_ULL(4, 0)
#define MPI_TX_TXNUM GENMASK_ULL(12, 8)
#define MPI_TX_LEAVECS BIT_ULL(16)
#define MPI_TX_CSID GENMASK_ULL(21, 20)
#define MPI_XMIT_TOTNUM GENMASK_ULL(10, 0)
#define MPI_XMIT_TXNUM GENMASK_ULL(30, 20)
#define MPI_XMIT_BUF_SEL BIT_ULL(59)
#define MPI_XMIT_LEAVECS BIT_ULL(60)
#define MPI_XMIT_CSID GENMASK_ULL(62, 61)
/* Used on Octeon TX2 */
void board_acquire_flash_arb(bool acquire);
/* Local driver data structure */
struct octeon_spi {
void __iomem *base; /* Register base address */
struct clk clk;
u32 clkdiv; /* Clock divisor for device speed */
};
static u64 octeon_spi_set_mpicfg(struct udevice *dev)
{
struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev);
struct udevice *bus = dev_get_parent(dev);
struct octeon_spi *priv = dev_get_priv(bus);
u64 mpi_cfg;
uint max_speed = slave->max_hz;
bool cpha, cpol;
if (!max_speed)
max_speed = 12500000;
if (max_speed > OCTEON_SPI_MAX_CLOCK_HZ)
max_speed = OCTEON_SPI_MAX_CLOCK_HZ;
debug("\n slave params %d %d %d\n", slave->cs,
slave->max_hz, slave->mode);
cpha = !!(slave->mode & SPI_CPHA);
cpol = !!(slave->mode & SPI_CPOL);
mpi_cfg = FIELD_PREP(MPI_CFG_CLKDIV, priv->clkdiv & 0x1fff) |
FIELD_PREP(MPI_CFG_CSHI, !!(slave->mode & SPI_CS_HIGH)) |
FIELD_PREP(MPI_CFG_LSBFIRST, !!(slave->mode & SPI_LSB_FIRST)) |
FIELD_PREP(MPI_CFG_WIREOR, !!(slave->mode & SPI_3WIRE)) |
FIELD_PREP(MPI_CFG_IDLELO, cpha != cpol) |
FIELD_PREP(MPI_CFG_CSLATE, cpha) |
MPI_CFG_CSENA0 | MPI_CFG_CSENA1 |
MPI_CFG_CSENA2 | MPI_CFG_CSENA1 |
MPI_CFG_ENABLE;
debug("\n mpi_cfg %llx\n", mpi_cfg);
return mpi_cfg;
}
/**
* Wait until the SPI bus is ready
*
* @param dev SPI device to wait for
*/
static void octeon_spi_wait_ready(struct udevice *dev)
{
struct udevice *bus = dev_get_parent(dev);
struct octeon_spi *priv = dev_get_priv(bus);
void *base = priv->base;
u64 mpi_sts;
do {
mpi_sts = readq(base + MPI_STS);
WATCHDOG_RESET();
} while (mpi_sts & MPI_STS_BUSY);
debug("%s(%s)\n", __func__, dev->name);
}
/**
* Claim the bus for a slave device
*
* @param dev SPI bus
*
* @return 0 for success, -EINVAL if chip select is invalid
*/
static int octeon_spi_claim_bus(struct udevice *dev)
{
struct udevice *bus = dev_get_parent(dev);
struct octeon_spi *priv = dev_get_priv(bus);
void *base = priv->base;
u64 mpi_cfg;
debug("\n\n%s(%s)\n", __func__, dev->name);
if (!OCTEON_SPI_CS_VALID(spi_chip_select(dev)))
return -EINVAL;
if (IS_ENABLED(CONFIG_ARCH_OCTEONTX2))
board_acquire_flash_arb(true);
mpi_cfg = readq(base + MPI_CFG);
mpi_cfg &= ~MPI_CFG_TRITX;
mpi_cfg |= MPI_CFG_ENABLE;
writeq(mpi_cfg, base + MPI_CFG);
mpi_cfg = readq(base + MPI_CFG);
udelay(5); /** Wait for bus to settle */
return 0;
}
/**
* Release the bus to a slave device
*
* @param dev SPI bus
*
* @return 0 for success, -EINVAL if chip select is invalid
*/
static int octeon_spi_release_bus(struct udevice *dev)
{
struct udevice *bus = dev_get_parent(dev);
struct octeon_spi *priv = dev_get_priv(bus);
void *base = priv->base;
u64 mpi_cfg;
debug("%s(%s)\n\n", __func__, dev->name);
if (!OCTEON_SPI_CS_VALID(spi_chip_select(dev)))
return -EINVAL;
if (IS_ENABLED(CONFIG_ARCH_OCTEONTX2))
board_acquire_flash_arb(false);
mpi_cfg = readq(base + MPI_CFG);
mpi_cfg &= ~MPI_CFG_ENABLE;
writeq(mpi_cfg, base + MPI_CFG);
mpi_cfg = readq(base + MPI_CFG);
udelay(1);
return 0;
}
static int octeon_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev_get_parent(dev);
struct octeon_spi *priv = dev_get_priv(bus);
void *base = priv->base;
u64 mpi_tx;
u64 mpi_cfg;
u64 wide_dat = 0;
int len = bitlen / 8;
int i;
const u8 *tx_data = dout;
u8 *rx_data = din;
int cs = spi_chip_select(dev);
if (!OCTEON_SPI_CS_VALID(cs))
return -EINVAL;
debug("\n %s(%s, %u, %p, %p, 0x%lx), cs: %d\n",
__func__, dev->name, bitlen, dout, din, flags, cs);
mpi_cfg = octeon_spi_set_mpicfg(dev);
if (mpi_cfg != readq(base + MPI_CFG)) {
writeq(mpi_cfg, base + MPI_CFG);
mpi_cfg = readq(base + MPI_CFG);
udelay(10);
}
debug("\n mpi_cfg upd %llx\n", mpi_cfg);
/*
* Start by writing and reading 8 bytes at a time. While we can support
* up to 10, it's easier to just use 8 with the MPI_WIDE_DAT register.
*/
while (len > 8) {
if (tx_data) {
wide_dat = get_unaligned((u64 *)tx_data);
debug(" tx: %016llx \t", (unsigned long long)wide_dat);
tx_data += 8;
writeq(wide_dat, base + MPI_WIDE_DAT);
}
mpi_tx = FIELD_PREP(MPI_TX_CSID, cs) |
FIELD_PREP(MPI_TX_LEAVECS, 1) |
FIELD_PREP(MPI_TX_TXNUM, tx_data ? 8 : 0) |
FIELD_PREP(MPI_TX_TOTNUM, 8);
writeq(mpi_tx, base + MPI_TX);
octeon_spi_wait_ready(dev);
debug("\n ");
if (rx_data) {
wide_dat = readq(base + MPI_WIDE_DAT);
debug(" rx: %016llx\t", (unsigned long long)wide_dat);
*(u64 *)rx_data = wide_dat;
rx_data += 8;
}
len -= 8;
}
debug("\n ");
/* Write and read the rest of the data */
if (tx_data) {
for (i = 0; i < len; i++) {
debug(" tx: %02x\n", *tx_data);
writeq(*tx_data++, base + MPI_DAT(i));
}
}
mpi_tx = FIELD_PREP(MPI_TX_CSID, cs) |
FIELD_PREP(MPI_TX_LEAVECS, !(flags & SPI_XFER_END)) |
FIELD_PREP(MPI_TX_TXNUM, tx_data ? len : 0) |
FIELD_PREP(MPI_TX_TOTNUM, len);
writeq(mpi_tx, base + MPI_TX);
octeon_spi_wait_ready(dev);
debug("\n ");
if (rx_data) {
for (i = 0; i < len; i++) {
*rx_data = readq(base + MPI_DAT(i)) & 0xff;
debug(" rx: %02x\n", *rx_data);
rx_data++;
}
}
return 0;
}
static int octeontx2_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev_get_parent(dev);
struct octeon_spi *priv = dev_get_priv(bus);
void *base = priv->base;
u64 mpi_xmit;
u64 mpi_cfg;
u64 wide_dat = 0;
int len = bitlen / 8;
int rem;
int i;
const u8 *tx_data = dout;
u8 *rx_data = din;
int cs = spi_chip_select(dev);
if (!OCTEON_SPI_CS_VALID(cs))
return -EINVAL;
debug("\n %s(%s, %u, %p, %p, 0x%lx), cs: %d\n",
__func__, dev->name, bitlen, dout, din, flags, cs);
mpi_cfg = octeon_spi_set_mpicfg(dev);
mpi_cfg |= MPI_CFG_TRITX | MPI_CFG_LEGACY_DIS | MPI_CFG_CS_STICKY |
MPI_CFG_TB100_EN;
mpi_cfg &= ~MPI_CFG_IOMODE;
if (flags & (SPI_TX_DUAL | SPI_RX_DUAL))
mpi_cfg |= FIELD_PREP(MPI_CFG_IOMODE, 2);
if (flags & (SPI_TX_QUAD | SPI_RX_QUAD))
mpi_cfg |= FIELD_PREP(MPI_CFG_IOMODE, 3);
if (mpi_cfg != readq(base + MPI_CFG)) {
writeq(mpi_cfg, base + MPI_CFG);
mpi_cfg = readq(base + MPI_CFG);
udelay(10);
}
debug("\n mpi_cfg upd %llx\n\n", mpi_cfg);
/* Start by writing or reading 1024 bytes at a time. */
while (len > 1024) {
if (tx_data) {
/* 8 bytes per iteration */
for (i = 0; i < 128; i++) {
wide_dat = get_unaligned((u64 *)tx_data);
debug(" tx: %016llx \t",
(unsigned long long)wide_dat);
if ((i % 4) == 3)
debug("\n");
tx_data += 8;
writeq(wide_dat, base + MPI_WIDE_BUF(i));
}
}
mpi_xmit = FIELD_PREP(MPI_XMIT_CSID, cs) | MPI_XMIT_LEAVECS |
FIELD_PREP(MPI_XMIT_TXNUM, tx_data ? 1024 : 0) |
FIELD_PREP(MPI_XMIT_TOTNUM, 1024);
writeq(mpi_xmit, base + MPI_XMIT);
octeon_spi_wait_ready(dev);
debug("\n ");
if (rx_data) {
/* 8 bytes per iteration */
for (i = 0; i < 128; i++) {
wide_dat = readq(base + MPI_WIDE_BUF(i));
debug(" rx: %016llx\t",
(unsigned long long)wide_dat);
if ((i % 4) == 3)
debug("\n");
*(u64 *)rx_data = wide_dat;
rx_data += 8;
}
}
len -= 1024;
}
if (tx_data) {
rem = len % 8;
/* 8 bytes per iteration */
for (i = 0; i < len / 8; i++) {
wide_dat = get_unaligned((u64 *)tx_data);
debug(" tx: %016llx \t",
(unsigned long long)wide_dat);
if ((i % 4) == 3)
debug("\n");
tx_data += 8;
writeq(wide_dat, base + MPI_WIDE_BUF(i));
}
if (rem) {
memcpy(&wide_dat, tx_data, rem);
debug(" rtx: %016llx\t", wide_dat);
writeq(wide_dat, base + MPI_WIDE_BUF(i));
}
}
mpi_xmit = FIELD_PREP(MPI_XMIT_CSID, cs) |
FIELD_PREP(MPI_XMIT_LEAVECS, !(flags & SPI_XFER_END)) |
FIELD_PREP(MPI_XMIT_TXNUM, tx_data ? len : 0) |
FIELD_PREP(MPI_XMIT_TOTNUM, len);
writeq(mpi_xmit, base + MPI_XMIT);
octeon_spi_wait_ready(dev);
debug("\n ");
if (rx_data) {
rem = len % 8;
/* 8 bytes per iteration */
for (i = 0; i < len / 8; i++) {
wide_dat = readq(base + MPI_WIDE_BUF(i));
debug(" rx: %016llx\t",
(unsigned long long)wide_dat);
if ((i % 4) == 3)
debug("\n");
*(u64 *)rx_data = wide_dat;
rx_data += 8;
}
if (rem) {
wide_dat = readq(base + MPI_WIDE_BUF(i));
debug(" rrx: %016llx\t",
(unsigned long long)wide_dat);
memcpy(rx_data, &wide_dat, rem);
rx_data += rem;
}
}
return 0;
}
static bool octeon_spi_supports_op(struct spi_slave *slave,
const struct spi_mem_op *op)
{
/* For now, support only below combinations
* 1-1-1
* 1-1-2 1-2-2
* 1-1-4 1-4-4
*/
if (op->cmd.buswidth != 1)
return false;
return true;
}
static int octeon_spi_exec_op(struct spi_slave *slave,
const struct spi_mem_op *op)
{
unsigned long flags = SPI_XFER_BEGIN;
const void *tx;
void *rx;
u8 opcode, *buf;
u8 *addr;
int i, temp, ret;
if (op->cmd.buswidth != 1)
return -ENOTSUPP;
/* Send CMD */
i = 0;
opcode = op->cmd.opcode;
if (!op->data.nbytes && !op->addr.nbytes && !op->dummy.nbytes)
flags |= SPI_XFER_END;
ret = octeontx2_spi_xfer(slave->dev, 8, (void *)&opcode, NULL, flags);
if (ret < 0)
return ret;
/* Send Address and dummy */
if (op->addr.nbytes) {
/* Alloc buffer for address+dummy */
buf = (u8 *)calloc(1, op->addr.nbytes + op->dummy.nbytes);
if (!buf) {
printf("%s Out of memory\n", __func__);
return -ENOMEM;
}
addr = (u8 *)&op->addr.val;
for (temp = 0; temp < op->addr.nbytes; temp++)
buf[i++] = *(u8 *)(addr + op->addr.nbytes - 1 - temp);
for (temp = 0; temp < op->dummy.nbytes; temp++)
buf[i++] = 0xff;
if (op->addr.buswidth == 2)
flags |= SPI_RX_DUAL;
if (op->addr.buswidth == 4)
flags |= SPI_RX_QUAD;
if (!op->data.nbytes)
flags |= SPI_XFER_END;
ret = octeontx2_spi_xfer(slave->dev, i * 8, (void *)buf, NULL,
flags);
free(buf);
if (ret < 0)
return ret;
}
if (!op->data.nbytes)
return 0;
/* Send/Receive Data */
flags |= SPI_XFER_END;
if (op->data.buswidth == 2)
flags |= SPI_RX_DUAL;
if (op->data.buswidth == 4)
flags |= SPI_RX_QUAD;
rx = (op->data.dir == SPI_MEM_DATA_IN) ? op->data.buf.in : NULL;
tx = (op->data.dir == SPI_MEM_DATA_OUT) ? op->data.buf.out : NULL;
ret = octeontx2_spi_xfer(slave->dev, (op->data.nbytes * 8), tx, rx,
flags);
return ret;
}
static const struct spi_controller_mem_ops octeontx2_spi_mem_ops = {
.supports_op = octeon_spi_supports_op,
.exec_op = octeon_spi_exec_op,
};
/**
* Set the speed of the SPI bus
*
* @param bus bus to set
* @param max_hz maximum speed supported
*/
static int octeon_spi_set_speed(struct udevice *bus, uint max_hz)
{
struct octeon_spi *priv = dev_get_priv(bus);
ulong clk_rate;
u32 calc_hz;
if (max_hz > OCTEON_SPI_MAX_CLOCK_HZ)
max_hz = OCTEON_SPI_MAX_CLOCK_HZ;
clk_rate = clk_get_rate(&priv->clk);
if (IS_ERR_VALUE(clk_rate))
return -EINVAL;
debug("%s(%s, %u, %lu)\n", __func__, bus->name, max_hz, clk_rate);
priv->clkdiv = clk_rate / (2 * max_hz);
while (1) {
calc_hz = clk_rate / (2 * priv->clkdiv);
if (calc_hz <= max_hz)
break;
priv->clkdiv += 1;
}
if (priv->clkdiv > 8191)
return -EINVAL;
debug("%s: clkdiv=%d\n", __func__, priv->clkdiv);
return 0;
}
static int octeon_spi_set_mode(struct udevice *bus, uint mode)
{
/* We don't set it here */
return 0;
}
static struct dm_spi_ops octeon_spi_ops = {
.claim_bus = octeon_spi_claim_bus,
.release_bus = octeon_spi_release_bus,
.set_speed = octeon_spi_set_speed,
.set_mode = octeon_spi_set_mode,
.xfer = octeon_spi_xfer,
};
static int octeon_spi_probe(struct udevice *dev)
{
struct octeon_spi *priv = dev_get_priv(dev);
int ret;
/* Octeon TX & TX2 use PCI based probing */
if (device_is_compatible(dev, "cavium,thunder-8190-spi")) {
pci_dev_t bdf = dm_pci_get_bdf(dev);
debug("SPI PCI device: %x\n", bdf);
priv->base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
PCI_REGION_MEM);
/* Add base offset */
priv->base += 0x1000;
/*
* Octeon TX2 needs a different xfer function and supports
* mem_ops
*/
if (device_is_compatible(dev, "cavium,thunderx-spi")) {
octeon_spi_ops.xfer = octeontx2_spi_xfer;
octeon_spi_ops.mem_ops = &octeontx2_spi_mem_ops;
}
} else {
priv->base = dev_remap_addr(dev);
}
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0)
return ret;
ret = clk_enable(&priv->clk);
if (ret)
return ret;
debug("SPI bus %s %d at %p\n", dev->name, dev->seq, priv->base);
return 0;
}
static const struct udevice_id octeon_spi_ids[] = {
/* MIPS Octeon */
{ .compatible = "cavium,octeon-3010-spi" },
/* ARM Octeon TX / TX2 */
{ .compatible = "cavium,thunder-8190-spi" },
{ }
};
U_BOOT_DRIVER(octeon_spi) = {
.name = "spi_octeon",
.id = UCLASS_SPI,
.of_match = octeon_spi_ids,
.probe = octeon_spi_probe,
.priv_auto_alloc_size = sizeof(struct octeon_spi),
.ops = &octeon_spi_ops,
};