diff --git a/MAINTAINERS b/MAINTAINERS index de499940e5..c6dd9bf838 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -670,6 +670,7 @@ F: common/dfu.c F: common/update.c F: common/usb_storage.c F: doc/api/dfu.rst +F: doc/usage/dfu.rst F: drivers/dfu/ F: drivers/usb/gadget/ F: include/dfu.h diff --git a/doc/README.dfu b/doc/README.dfu deleted file mode 100644 index eacd5bbfb4..0000000000 --- a/doc/README.dfu +++ /dev/null @@ -1,311 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ - -Device Firmware Upgrade (DFU) - -Overview: - - The Device Firmware Upgrade (DFU) allows to download and upload firmware - to/from U-Boot connected over USB. - - U-boot follows the Universal Serial Bus Device Class Specification for - Device Firmware Upgrade Version 1.1 the USB forum (DFU v1.1 in www.usb.org). - - U-Boot implements this DFU capability (CONFIG_DFU) with the command dfu - (cmd/dfu.c / CONFIG_CMD_DFU) based on: - - the DFU stack (common/dfu.c and common/spl/spl_dfu.c), based on the - USB DFU download gadget (drivers/usb/gadget/f_dfu.c) - - The access to mediums is done in DFU backends (driver/dfu) - - Today the supported DFU backends are: - - MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT) - - NAND - - RAM - - SF (serial flash) - - MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...) - - virtual - - These DFU backends are also used by - - the dfutftp (see README.dfutftp) - - the thordown command (cmd/thordown.c and gadget/f_thor.c) - - The "virtual" backend is a generic DFU backend to support a board specific - target (for example OTP), only based on the weak functions: - - dfu_write_medium_virt - - dfu_get_medium_size_virt - - dfu_read_medium_virt - -Configuration Options: - CONFIG_DFU - CONFIG_DFU_OVER_USB - CONFIG_DFU_MMC - CONFIG_DFU_MTD - CONFIG_DFU_NAND - CONFIG_DFU_RAM - CONFIG_DFU_SF - CONFIG_DFU_SF_PART - CONFIG_DFU_TIMEOUT - CONFIG_DFU_VIRTUAL - CONFIG_CMD_DFU - -Environment variables: - the dfu command uses 3 environments variables: - "dfu_alt_info" : the DFU setting for the USB download gadget with a semicolon - separated string of information on each alternate: - dfu_alt_info=";;....;" - - when several devices are used, the format is: - - '='alternate list (';' separated) - - each interface is separated by '&' - dfu_alt_info=\ - " =;....;&"\ - " =;....;&"\ - ...\ - " =;....;&" - - "dfu_bufsiz" : size of the DFU buffer, when absent, use - CONFIG_SYS_DFU_DATA_BUF_SIZE (8 MiB by default) - - "dfu_hash_algo" : name of the hash algorithm to use - -Commands: - dfu [ ] list - list the alternate device defined in "dfu_alt_info" - - dfu [ ] [] - start the dfu stack on the USB instance with the selected medium - backend and use the "dfu_alt_info" variable to configure the - alternate setting and link each one with the medium - The dfu command continue until receive a ^C in console or - a DFU detach transaction from HOST. If CONFIG_DFU_TIMEOUT option - is enabled and parameter is present in the command line, - the DFU operation will be aborted automatically after - seconds of waiting remote to initiate DFU session. - - The possible values of are : - (with = 0 in the dfu command example) - - "mmc" (for eMMC and SD card) - cmd: dfu 0 mmc - each element in "dfu_alt_info" = - raw [mmcpart ] raw access to mmc device - part [mmcpart ] raw access to partition - fat [mmcpart ] file in FAT partition - ext4 [mmcpart ] file in EXT4 partition - skip 0 0 ignore flashed data - script 0 0 execute commands in shell - - with being the GPT or DOS partition index, - with being the eMMC hardware partition number. - - A value of environment variable dfu_alt_info for eMMC could be: - - "u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1" - - A value of environment variable dfu_alt_info for SD card could be: - - "u-boot raw 0x80 0x800;uImage ext4 0 2" - - If don't want to flash given image file to storage, use "skip" type - entity. - - It can be used to protect flashing wrong image for the specific board. - - Especailly, this layout will be useful when thor protocol is used, - which performs flashing in batch mode, where more than one file is - processed. - For example, if one makes a single tar file with support for the two - boards with u-boot-.bin and u-boot-.bin files, one - can use it to flash a proper u-boot image on both without a failure: - - "u-boot-.bin raw 0x80 0x800; u-boot-.bin skip 0 0" - - When flashing new system image requires do some more complex things - than just writing data to the storage medium, one can use 'script' - type. Data written to such entity will be executed as a command list - in the u-boot's shell. This for example allows to re-create partition - layout and even set new dfu_alt_info for the newly created paritions. - Such script would look like: - --->8--- - setenv dfu_alt_info ... - setenv mbr_parts ... - mbr write ... - --->8--- - Please note that this means that user will be able to execute any - arbitrary commands just like in the u-boot's shell. - - "nand" (raw slc nand device) - cmd: dfu 0 nand - each element in "dfu_alt_info" = - raw raw access to mmc device - part raw acces to partition - partubi raw acces to ubi partition - - with is the MTD partition index - - "ram" - cmd: dfu 0 ram - ( is not used for RAM target) - each element in "dfu_alt_info" = - ram raw access to ram - - "sf" (serial flash : NOR) - cmd: dfu 0 sf - each element in "dfu_alt_info" = - raw raw access to sf device - part raw acces to partition - partubi raw acces to ubi partition - - with is the MTD partition index - - "mtd" (all MTD device: NAND, SPI-NOR, SPI-NAND,...) - cmd: dfu 0 mtd - with the mtd identifier as defined in mtd command - (nand0, nor0, spi-nand0,...) - each element in "dfu_alt_info" = - raw raw access to mtd device - part raw acces to partition - partubi raw acces to ubi partition - - with is the MTD partition index - - "virt" - cmd: dfu 0 virt - each element in "dfu_alt_info" = - - - and are absent: - the dfu command to use multiple devices - cmd: dfu 0 list - cmd: dfu 0 - "dfu_alt_info" variable provides the list of with - alternate list separated by '&' with the same format for each - mmc =;....; - nand =;....; - ram =;....; - sf =;....; - mtd =;....; - virt =;....; - -Callbacks: - The weak callback functions can be implemented to manage specific behavior - - dfu_initiated_callback : called when the DFU transaction is started, - used to initiase the device - - dfu_flush_callback : called at the end of the DFU write after DFU - manifestation, used to manage the device when - DFU transaction is closed - -Host tools: - When U-Boot runs the dfu stack, the DFU host tools can be used - to send/receive firmwares on each configurated alternate. - - For example dfu-util is a host side implementation of the DFU 1.1 - specifications(http://dfu-util.sourceforge.net/) which works with U-Boot. - -Usage: - Example 1: firmware located in eMMC or SD card, with: - - alternate 1 (alt=1) for SPL partition (GPT partition 1) - - alternate 2 (alt=2) for U-Boot partition (GPT partition 2) - - The U-Boot configuration is: - - U-Boot> env set dfu_alt_info "spl part 0 1;u-boot part 0 2" - - U-Boot> dfu 0 mmc 0 list - DFU alt settings list: - dev: eMMC alt: 0 name: spl layout: RAW_ADDR - dev: eMMC alt: 1 name: u-boot layout: RAW_ADDR - - Boot> dfu 0 mmc 0 - - On the Host side: - - list the available alternate setting: - - $> dfu-util -l - dfu-util 0.9 - - Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. - Copyright 2010-2016 Tormod Volden and Stefan Schmidt - This program is Free Software and has ABSOLUTELY NO WARRANTY - Please report bugs to http://sourceforge.net/p/dfu-util/tickets/ - - Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \ - alt=1, name="u-boot", serial="003A00203438510D36383238" - Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \ - alt=0, name="spl", serial="003A00203438510D36383238" - - To download to U-Boot, use -D option - - $> dfu-util -a 0 -D u-boot-spl.bin - $> dfu-util -a 1 -D u-boot.bin - - To upload from U-Boot, use -U option - - $> dfu-util -a 0 -U u-boot-spl.bin - $> dfu-util -a 1 -U u-boot.bin - - To request a DFU detach and reset the USB connection: - $> dfu-util -a 0 -e -R - - - Example 2: firmware located in NOR (sf) and NAND, with: - - alternate 1 (alt=1) for SPL partition (NOR GPT partition 1) - - alternate 2 (alt=2) for U-Boot partition (NOR GPT partition 2) - - alternate 3 (alt=3) for U-Boot-env partition (NOR GPT partition 3) - - alternate 4 (alt=4) for UBI partition (NAND GPT partition 1) - - U-Boot> env set dfu_alt_info \ - "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \ - u-boot-env part 0 3&nand 0=UBI partubi 0,1" - - U-Boot> dfu 0 list - - DFU alt settings list: - dev: SF alt: 0 name: spl layout: RAW_ADDR - dev: SF alt: 1 name: ssbl layout: RAW_ADDR - dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR - dev: NAND alt: 3 name: UBI layout: RAW_ADDR - - U-Boot> dfu 0 - - $> dfu-util -l - Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ - intf=0, alt=3, name="UBI", serial="002700333338511934383330" - Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ - intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330" - Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ - intf=0, alt=1, name="u-boot", serial="002700333338511934383330" - Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ - intf=0, alt=0, name="spl", serial="002700333338511934383330" - - Same example with MTD backend - - U-Boot> env set dfu_alt_info \ - "mtd nor0=spl part 1;u-boot part 2;u-boot-env part 3&"\ - "mtd nand0=UBI partubi 1" - - U-Boot> dfu 0 list - using id 'nor0,0' - using id 'nor0,1' - using id 'nor0,2' - using id 'nand0,0' - DFU alt settings list: - dev: MTD alt: 0 name: spl layout: RAW_ADDR - dev: MTD alt: 1 name: u-boot layout: RAW_ADDR - dev: MTD alt: 2 name: u-boot-env layout: RAW_ADDR - dev: MTD alt: 3 name: UBI layout: RAW_ADDR - - Example 3: firmware located in SD Card (mmc) and virtual partition on - OTP and PMIC not volatile memory - - alternate 1 (alt=1) for scard - - alternate 2 (alt=2) for OTP (virtual) - - alternate 3 (alt=3) for PMIC NVM (virtual) - - U-Boot> env set dfu_alt_info \ - "mmc 0=sdcard raw 0 0x100000&"\ - "virt 0=otp" \ - "virt 1=pmic" - - U-Boot> dfu 0 list - DFU alt settings list: - dev: eMMC alt: 0 name: sdcard layout: RAW_ADDR - dev: VIRT alt: 1 name: otp layout: RAW_ADDR - dev: VIRT alt: 2 name: pmic layout: RAW_ADDR diff --git a/doc/usage/dfu.rst b/doc/usage/dfu.rst new file mode 100644 index 0000000000..11c88072b8 --- /dev/null +++ b/doc/usage/dfu.rst @@ -0,0 +1,404 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Device Firmware Upgrade (DFU) +============================= + +Overview +-------- + +The Device Firmware Upgrade (DFU) allows to download and upload firmware +to/from U-Boot connected over USB. + +U-boot follows the Universal Serial Bus Device Class Specification for +Device Firmware Upgrade Version 1.1 the USB forum (DFU v1.1 in www.usb.org). + +U-Boot implements this DFU capability (CONFIG_DFU) with the command dfu +(cmd/dfu.c / CONFIG_CMD_DFU) based on: + +- the DFU stack (common/dfu.c and common/spl/spl_dfu.c), based on the + USB DFU download gadget (drivers/usb/gadget/f_dfu.c) +- The access to mediums is done in DFU backends (driver/dfu) + +Today the supported DFU backends are: + +- MMC (RAW or FAT / EXT2 / EXT3 / EXT4 file system / SKIP / SCRIPT) +- NAND +- RAM +- SF (serial flash) +- MTD (all MTD device: NAND, SPI-NOR, SPI-NAND,...) +- virtual + +These DFU backends are also used by + +- the dfutftp (see README.dfutftp) +- the thordown command (cmd/thordown.c and gadget/f_thor.c) + +The "virtual" backend is a generic DFU backend to support a board specific +target (for example OTP), only based on the weak functions: + +- dfu_write_medium_virt +- dfu_get_medium_size_virt +- dfu_read_medium_virt + +Configuration Options +--------------------- + +The following configuration option are relevant for device firmware upgrade: + +* CONFIG_DFU +* CONFIG_DFU_OVER_USB +* CONFIG_DFU_MMC +* CONFIG_DFU_MTD +* CONFIG_DFU_NAND +* CONFIG_DFU_RAM +* CONFIG_DFU_SF +* CONFIG_DFU_SF_PART +* CONFIG_DFU_TIMEOUT +* CONFIG_DFU_VIRTUAL +* CONFIG_CMD_DFU + +Environment variables +--------------------- + +The dfu command uses 3 environments variables: + +dfu_alt_info + The DFU setting for the USB download gadget with a semicolon separated + string of information on each alternate:: + + dfu_alt_info=";;....;" + + When several devices are used, the format is: + + - '='alternate list (';' separated) + - each interface is separated by '&':: + + dfu_alt_info=\ + " =;....;&"\ + " =;....;&"\ + ...\ + " =;....;&" + +dfu_bufsiz + size of the DFU buffer, when absent, defaults to + CONFIG_SYS_DFU_DATA_BUF_SIZE (8 MiB by default) + +dfu_hash_algo + name of the hash algorithm to use + +Commands +-------- + +dfu [ ] list + list the alternate device defined in *dfu_alt_info* + +dfu [ ] [] + start the dfu stack on the USB instance with the selected medium + backend and use the *dfu_alt_info* variable to configure the + alternate setting and link each one with the medium + The dfu command continue until receive a ^C in console or + a DFU detach transaction from HOST. If CONFIG_DFU_TIMEOUT option + is enabled and parameter is present in the command line, + the DFU operation will be aborted automatically after + seconds of waiting remote to initiate DFU session. + +The possible values of are (with = 0 in the dfu +command example) + +mmc + for eMMC and SD card:: + + dfu 0 mmc + + each element in *dfu_alt_info* being + + * raw [mmcpart ] raw access to mmc device + * part [mmcpart ] raw access to partition + * fat [mmcpart ] file in FAT partition + * ext4 [mmcpart ] file in EXT4 partition + * skip 0 0 ignore flashed data + * script 0 0 execute commands in shell + + with + + partid + being the GPT or DOS partition index, + num + being the eMMC hardware partition number. + + A value of environment variable *dfu_alt_info* for eMMC could be:: + + u-boot raw 0x3e 0x800 mmcpart 1;bl2 raw 0x1e 0x1d mmcpart 1 + + A value of environment variable *dfu_alt_info* for SD card could be:: + + u-boot raw 0x80 0x800;uImage ext4 0 2 + + If don't want to flash given image file to storage, use "skip" type + entity. + + - It can be used to protect flashing wrong image for the specific board. + - Especailly, this layout will be useful when thor protocol is used, + which performs flashing in batch mode, where more than one file is + processed. + + For example, if one makes a single tar file with support for the two + boards with u-boot-.bin and u-boot-.bin files, one + can use it to flash a proper u-boot image on both without a failure:: + + u-boot-.bin raw 0x80 0x800; u-boot-.bin skip 0 0 + + When flashing new system image requires do some more complex things + than just writing data to the storage medium, one can use 'script' + type. Data written to such entity will be executed as a command list + in the u-boot's shell. This for example allows to re-create partition + layout and even set new *dfu_alt_info* for the newly created paritions. + Such script would look like:: + + setenv dfu_alt_info ... + setenv mbr_parts ... + mbr write ... + + Please note that this means that user will be able to execute any + arbitrary commands just like in the u-boot's shell. + +nand + raw slc nand device:: + + dfu 0 nand + + each element in *dfu_alt_info* being either of + + * raw raw access to mmc device + * part raw acces to partition + * partubi raw acces to ubi partition + + with + + partid + is the MTD partition index + +ram + raw access to ram:: + + dfu 0 ram + + dev + is not used for RAM target + + each element in *dfu_alt_info* being:: + + ram raw access to ram + +sf + serial flash : NOR:: + + cmd: dfu 0 sf + + each element in *dfu_alt_info* being either of: + + * raw raw access to sf device + * part raw acces to partition + * partubi raw acces to ubi partition + + with + + partid + is the MTD partition index + +mtd + all MTD device: NAND, SPI-NOR, SPI-NAND,...:: + + cmd: dfu 0 mtd + + with + + dev + the mtd identifier as defined in mtd command + (nand0, nor0, spi-nand0,...) + + each element in *dfu_alt_info* being either of: + + * raw forraw access to mtd device + * part for raw acces to partition + * partubi for raw acces to ubi partition + + with + + partid + is the MTD partition index + +virt + virtual flash back end for DFU + + :: + + cmd: dfu 0 virt + + each element in *dfu_alt_info* being: + + * + + and are absent, the dfu command to use multiple devices:: + + cmd: dfu 0 list + cmd: dfu 0 + +*dfu_alt_info* variable provides the list of with +alternate list separated by '&' with the same format for each :: + + mmc =;....; + nand =;....; + ram =;....; + sf =;....; + mtd =;....; + virt =;....; + +Callbacks +--------- + +The weak callback functions can be implemented to manage specific behavior + +dfu_initiated_callback + called when the DFU transaction is started, used to initiase the device + +dfu_flush_callback + called at the end of the DFU write after DFU manifestation, used to manage + the device when DFU transaction is closed + +Host tools +---------- + +When U-Boot runs the dfu stack, the DFU host tools can be used +to send/receive firmwares on each configurated alternate. + +For example dfu-util is a host side implementation of the DFU 1.1 +specifications(http://dfu-util.sourceforge.net/) which works with U-Boot. + +Usage +----- + +Example 1: firmware located in eMMC or SD card, with: + +- alternate 1 (alt=1) for SPL partition (GPT partition 1) +- alternate 2 (alt=2) for U-Boot partition (GPT partition 2) + +The U-Boot configuration is:: + + U-Boot> env set dfu_alt_info "spl part 0 1;u-boot part 0 2" + + U-Boot> dfu 0 mmc 0 list + DFU alt settings list: + dev: eMMC alt: 0 name: spl layout: RAW_ADDR + dev: eMMC alt: 1 name: u-boot layout: RAW_ADDR + + Boot> dfu 0 mmc 0 + +On the Host side: + +list the available alternate setting:: + + $> dfu-util -l + dfu-util 0.9 + + Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc. + Copyright 2010-2016 Tormod Volden and Stefan Schmidt + This program is Free Software and has ABSOLUTELY NO WARRANTY + Please report bugs to http://sourceforge.net/p/dfu-util/tickets/ + + Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \ + alt=1, name="u-boot", serial="003A00203438510D36383238" + Found DFU: [0483:5720] ver=0200, devnum=45, cfg=1, intf=0, path="3-1.3.1", \ + alt=0, name="spl", serial="003A00203438510D36383238" + + To download to U-Boot, use -D option + + $> dfu-util -a 0 -D u-boot-spl.bin + $> dfu-util -a 1 -D u-boot.bin + + To upload from U-Boot, use -U option + + $> dfu-util -a 0 -U u-boot-spl.bin + $> dfu-util -a 1 -U u-boot.bin + + To request a DFU detach and reset the USB connection: + $> dfu-util -a 0 -e -R + + +Example 2: firmware located in NOR (sf) and NAND, with: + +- alternate 1 (alt=1) for SPL partition (NOR GPT partition 1) +- alternate 2 (alt=2) for U-Boot partition (NOR GPT partition 2) +- alternate 3 (alt=3) for U-Boot-env partition (NOR GPT partition 3) +- alternate 4 (alt=4) for UBI partition (NAND GPT partition 1) + +:: + + U-Boot> env set dfu_alt_info \ + "sf 0:0:10000000:0=spl part 0 1;u-boot part 0 2; \ + u-boot-env part 0 3&nand 0=UBI partubi 0,1" + + U-Boot> dfu 0 list + + DFU alt settings list: + dev: SF alt: 0 name: spl layout: RAW_ADDR + dev: SF alt: 1 name: ssbl layout: RAW_ADDR + dev: SF alt: 2 name: u-boot-env layout: RAW_ADDR + dev: NAND alt: 3 name: UBI layout: RAW_ADDR + + U-Boot> dfu 0 + +:: + + $> dfu-util -l + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=3, name="UBI", serial="002700333338511934383330" + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=2, name="u-boot-env", serial="002700333338511934383330" + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=1, name="u-boot", serial="002700333338511934383330" + Found DFU: [0483:5720] ver=9999, devnum=96, cfg=1,\ + intf=0, alt=0, name="spl", serial="002700333338511934383330" + +Same example with MTD backend + +:: + + U-Boot> env set dfu_alt_info \ + "mtd nor0=spl part 1;u-boot part 2;u-boot-env part 3&"\ + "mtd nand0=UBI partubi 1" + + U-Boot> dfu 0 list + using id 'nor0,0' + using id 'nor0,1' + using id 'nor0,2' + using id 'nand0,0' + DFU alt settings list: + dev: MTD alt: 0 name: spl layout: RAW_ADDR + dev: MTD alt: 1 name: u-boot layout: RAW_ADDR + dev: MTD alt: 2 name: u-boot-env layout: RAW_ADDR + dev: MTD alt: 3 name: UBI layout: RAW_ADDR + +Example 3 + +firmware located in SD Card (mmc) and virtual partition on OTP and PMIC not +volatile memory + +- alternate 1 (alt=1) for scard +- alternate 2 (alt=2) for OTP (virtual) +- alternate 3 (alt=3) for PMIC NVM (virtual) + +:: + + U-Boot> env set dfu_alt_info \ + "mmc 0=sdcard raw 0 0x100000&"\ + "virt 0=otp" \ + "virt 1=pmic" + +:: + + U-Boot> dfu 0 list + DFU alt settings list: + dev: eMMC alt: 0 name: sdcard layout: RAW_ADDR + dev: VIRT alt: 1 name: otp layout: RAW_ADDR + dev: VIRT alt: 2 name: pmic layout: RAW_ADDR diff --git a/doc/usage/index.rst b/doc/usage/index.rst index 9169fff0be..6c59bbadab 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -4,6 +4,7 @@ Use U-Boot .. toctree:: :maxdepth: 1 + dfu fdt_overlays netconsole partitions