mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
sunxi: Add defconfig and dts for Orange Pi 2 SBC
The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot, 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header and a 40-pin GPIO header. The added dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
This commit is contained in:
Hans de Goede
parent
d1b7407c2f
commit
72cd013293
|
|
@ -201,6 +201,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
|
|||
sun8i-a83t-cubietruck-plus.dtb \
|
||||
sun8i-a83t-sinovoip-bpi-m3.dtb
|
||||
dtb-$(CONFIG_MACH_SUN8I_H3) += \
|
||||
sun8i-h3-orangepi-2.dtb \
|
||||
sun8i-h3-orangepi-pc.dtb \
|
||||
sun8i-h3-orangepi-plus.dtb
|
||||
dtb-$(CONFIG_MACH_SUN9I) += \
|
||||
|
|
|
|||
186
arch/arm/dts/sun8i-h3-orangepi-2.dts
Normal file
186
arch/arm/dts/sun8i-h3-orangepi-2.dts
Normal file
|
|
@ -0,0 +1,186 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "sun8i-h3.dtsi"
|
||||
#include "sunxi-common-regulators.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/sun4i-a10.h>
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi 2";
|
||||
compatible = "xunlong,orangepi-2", "allwinner,sun8i-h3";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
|
||||
|
||||
status_led {
|
||||
label = "orangepi:red:status";
|
||||
gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
pwr_led {
|
||||
label = "orangepi:green:pwr";
|
||||
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
};
|
||||
|
||||
r_gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sw_r_opc>;
|
||||
|
||||
sw2 {
|
||||
label = "sw2";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sw4 {
|
||||
label = "sw4";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi_pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_pwrseq_pin_orangepi>;
|
||||
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 WIFI_EN */
|
||||
};
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ir {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
|
||||
cd-inverted;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins_a>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pio {
|
||||
leds_opc: led_pins@0 {
|
||||
allwinner,pins = "PA15";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
&r_pio {
|
||||
leds_r_opc: led_pins@0 {
|
||||
allwinner,pins = "PL10";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
sw_r_opc: key_pins@0 {
|
||||
allwinner,pins = "PL3", "PL4";
|
||||
allwinner,function = "gpio_in";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
|
||||
wifi_pwrseq_pin_orangepi: wifi_pwrseq_pin@0 {
|
||||
allwinner,pins = "PL7";
|
||||
allwinner,function = "gpio_out";
|
||||
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
|
||||
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
|
||||
};
|
||||
};
|
||||
|
||||
®_usb1_vbus {
|
||||
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1_vbus_pin_a {
|
||||
allwinner,pins = "PG13";
|
||||
};
|
||||
|
||||
&usbphy {
|
||||
usb1_vbus-supply = <®_usb1_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -54,6 +54,7 @@ F: configs/Wits_Pro_A20_DKT_defconfig
|
|||
F: include/configs/sun8i.h
|
||||
F: configs/ga10h_v1_1_defconfig
|
||||
F: configs/gt90h_v4_defconfig
|
||||
F: configs/orangepi_2_defconfig
|
||||
F: configs/orangepi_pc_defconfig
|
||||
F: configs/orangepi_plus_defconfig
|
||||
F: configs/polaroid_mid2809pxe04_defconfig
|
||||
|
|
|
|||
18
configs/orangepi_2_defconfig
Normal file
18
configs/orangepi_2_defconfig
Normal file
|
|
@ -0,0 +1,18 @@
|
|||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_SUNXI=y
|
||||
CONFIG_MACH_SUN8I_H3=y
|
||||
CONFIG_DRAM_CLK=672
|
||||
CONFIG_DRAM_ZQ=3881979
|
||||
CONFIG_DRAM_ODT_EN=y
|
||||
CONFIG_MMC0_CD_PIN="PF6"
|
||||
# CONFIG_VIDEO is not set
|
||||
CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-2"
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_SPL=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_SY8106A_POWER=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB1_VBUS_PIN="PG13"
|
||||
Loading…
Reference in New Issue
Block a user