* Patch by Martin Krause, 27 May 2004:

Fix a MPC5xxx I2C timing issue in i2c_probe().

* Patch by Leif Lindholm, 27 May 2004:
  Fix board_init_f() for dbau1x00 board.
This commit is contained in:
wdenk 2004-06-09 15:29:49 +00:00
parent 3ff02c27d5
commit 697037fe9b
3 changed files with 9 additions and 2 deletions

View File

@ -2,6 +2,12 @@
Changes since U-Boot 1.1.1:
======================================================================
* Patch by Martin Krause, 27 May 2004:
Fix a MPC5xxx I2C timing issue in i2c_probe().
* Patch by Leif Lindholm, 27 May 2004:
Fix board_init_f() for dbau1x00 board.
* Patch by Imre Deak, 26 May 2004:
On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
Set flash base accordingly, and decide whether to do or skip board

View File

@ -104,17 +104,17 @@ int checkboard (void)
CFG_PCMCIA_ATTR_BASE, /* Hi */
0x3D000017, /* Lo0 */
0x3D200017); /* Lo1 */
#endif
#endif /* 0 */
write_one_tlb(22, /* index */
0x01ffe000, /* Pagemask, 16 MB pages */
CFG_PCMCIA_MEM_ADDR, /* Hi */
0x3E000017, /* Lo0 */
0x3E200017); /* Lo1 */
#endif /* CONFIG_IDE_PCMCIA */
/* Release reset of ethernet PHY chips */
/* Always do this, because linux does not know about it */
*phy = 3;
return 0;
#endif
}

View File

@ -285,6 +285,7 @@ int i2c_probe(uchar chip)
if (! do_address(chip, 0)) {
mpc_reg_out(&regs->mcr, 0, I2C_STA);
udelay(500);
break;
}