diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig index 232f33285d..286d36589d 100644 --- a/arch/arm/mach-imx/mx7/Kconfig +++ b/arch/arm/mach-imx/mx7/Kconfig @@ -28,6 +28,15 @@ config TARGET_CL_SOM_IMX7 select SUPPORT_SPL imply CMD_DM +config TARGET_MEERKAT96 + bool "NovTech Meerkat96 board" + select BOARD_LATE_INIT + select DM + select DM_SERIAL + select DM_THERMAL + select MX7D + imply CMD_DM + config TARGET_MX7DSABRESD bool "mx7dsabresd" select BOARD_LATE_INIT @@ -67,6 +76,7 @@ config SYS_SOC source "board/compulab/cl-som-imx7/Kconfig" source "board/freescale/mx7dsabresd/Kconfig" +source "board/novtech/meerkat96/Kconfig" source "board/technexion/pico-imx7d/Kconfig" source "board/toradex/colibri_imx7/Kconfig" source "board/warp7/Kconfig" diff --git a/board/novtech/meerkat96/Kconfig b/board/novtech/meerkat96/Kconfig new file mode 100644 index 0000000000..b0e46fcc1b --- /dev/null +++ b/board/novtech/meerkat96/Kconfig @@ -0,0 +1,12 @@ +if TARGET_MEERKAT96 + +config SYS_BOARD + default "meerkat96" + +config SYS_VENDOR + default "novtech" + +config SYS_CONFIG_NAME + default "meerkat96" + +endif diff --git a/board/novtech/meerkat96/MAINTAINERS b/board/novtech/meerkat96/MAINTAINERS new file mode 100644 index 0000000000..0eca2940d5 --- /dev/null +++ b/board/novtech/meerkat96/MAINTAINERS @@ -0,0 +1,6 @@ +MEERKAT96 BOARD +M: Shawn Guo +S: Maintained +F: board/novtech/meerkat96 +F: include/configs/meerkat96.h +F: configs/meerkat96_defconfig diff --git a/board/novtech/meerkat96/Makefile b/board/novtech/meerkat96/Makefile new file mode 100644 index 0000000000..f27e05641b --- /dev/null +++ b/board/novtech/meerkat96/Makefile @@ -0,0 +1 @@ +obj-y := meerkat96.o diff --git a/board/novtech/meerkat96/README b/board/novtech/meerkat96/README new file mode 100644 index 0000000000..bca2fad5a2 --- /dev/null +++ b/board/novtech/meerkat96/README @@ -0,0 +1,18 @@ +* Build U-Boot for Meerkat96 board + + $ make mrproper + $ make meerkat96_defconfig + $ make + + It will generate the U-Boot binary called u-boot-dtb.imx + +* Install U-Boot to MicroSD card + + Plug MicroSD card to a Linux machine (with card reader), find the + device name and replace sd[x] with the name in the following command. + + $ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=512 seek=2 + + It will install U-Boot to MicroSD card at 1KiB offset. Insert the + card to Meerkat96 MicroSD slot, power up the board, and U-Boot should + boot from the card. diff --git a/board/novtech/meerkat96/imximage.cfg b/board/novtech/meerkat96/imximage.cfg new file mode 100644 index 0000000000..3bd8cc55e5 --- /dev/null +++ b/board/novtech/meerkat96/imximage.cfg @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +#define __ASSEMBLY__ +#include + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : sd + */ + +BOOT_FROM sd + +/* + * Secure boot support + */ +#ifdef CONFIG_SECURE_BOOT +CSF CONFIG_CSF_SIZE +#endif + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* Enable OCRAM EPDC */ +DATA 4 0x30340004 0x4F400005 + +/* ============================================================================= + * DDR Controller Registers + * ============================================================================= + * Memory type: DDR3 + * Manufacturer: ISSI + * Device Part Number: IS43TR16256AL-125KBL + * Clock Freq.: 533MHz + * Density per CS in Gb: 4 + * Chip Selects used: 1 + * Number of Banks: 8 + * Row address: 15 + * Column address: 10 + * Data bus width: 16 + * ROW-BANK interleave: ENABLED + * ============================================================================= + */ + +DATA 4 0x30391000 0x00000002 // deassert presetn +DATA 4 0x307A0000 0x01041001 // DDRC_MSTR +DATA 4 0x307A0064 0x00400046 // DDRC_RFSHTMG +DATA 4 0x307a0490 0x00000001 // DDRC_PCTRL_0 +DATA 4 0x307A00D4 0x00690000 // DDRC_INIT1 +DATA 4 0x307A00D0 0x00020083 // DDRC_INIT0 +DATA 4 0x307A00DC 0x09300004 // DDRC_INIT3 +DATA 4 0x307A00E0 0x04080000 // DDRC_INIT4 +DATA 4 0x307A00E4 0x00100004 // DDRC_INIT5 +DATA 4 0x307A00F4 0x0000033F // DDRC_RANKCTL +DATA 4 0x307A0100 0x090B1109 // DDRC_DRAMTMG0 +DATA 4 0x307A0104 0x0007020D // DDRC_DRAMTMG1 +DATA 4 0x307A0108 0x03040407 // DDRC_DRAMTMG2 +DATA 4 0x307A010C 0x00002006 // DDRC_DRAMTMG3 +DATA 4 0x307A0110 0x04020205 // DDRC_DRAMTMG4 +DATA 4 0x307A0114 0x03030202 // DDRC_DRAMTMG5 +DATA 4 0x307A0120 0x00000803 // DDRC_DRAMTMG8 +DATA 4 0x307A0180 0x00800020 // DDRC_ZQCTL0 +DATA 4 0x307A0190 0x02098204 // DDRC_DFITMG0 +DATA 4 0x307A0194 0x00030303 // DDRC_DFITMG1 +DATA 4 0x307A01A0 0x80400003 // DDRC_DFIUPD0 +DATA 4 0x307A01A4 0x00100020 // DDRC_DFIUPD1 +DATA 4 0x307A01A8 0x80100004 // DDRC_DFIUPD2 +DATA 4 0x307A0200 0x00000015 // DDRC_ADDRMAP0 +DATA 4 0x307A0204 0x00070707 // DDRC_ADDRMAP1 +DATA 4 0x307A0210 0x00000F0F // DDRC_ADDRMAP4 +DATA 4 0x307A0214 0x06060606 // DDRC_ADDRMAP5 +DATA 4 0x307A0218 0x0F060606 // DDRC_ADDRMAP6 +DATA 4 0x307A0240 0x06000604 // DDRC_ODTCFG +DATA 4 0x307A0244 0x00000001 // DDRC_ODTMAP + + +/* ============================================================================= + * PHY Control Register + * ============================================================================= + */ + +DATA 4 0x30391000 0x00000000 // deassert presetn +DATA 4 0x30790000 0x17420F40 // DDR_PHY_PHY_CON0 +DATA 4 0x30790004 0x10210100 // DDR_PHY_PHY_CON1 +DATA 4 0x30790010 0x00060807 // DDR_PHY_PHY_CON4 +DATA 4 0x307900B0 0x1010007E // DDR_PHY_MDLL_CON0 +DATA 4 0x3079009C 0x00000D6E // DDR_PHY_DRVDS_CON0 +DATA 4 0x30790030 0x08080808 // DDR_PHY_OFFSET_WR_CON0 +DATA 4 0x30790020 0x08080808 // DDR_PHY_OFFSET_RD_CON0 +DATA 4 0x30790050 0x01000010 // DDR_PHY_OFFSETD_CON0 +DATA 4 0x30790050 0x00000010 // DDR_PHY_OFFSETD_CON0 +DATA 4 0x30790018 0x0000000F // DDR_PHY_LP_CON0 +DATA 4 0x307900C0 0x0E407304 // DDR_PHY_ZQ_CON0 - Start Manual ZQ +DATA 4 0x307900C0 0x0E447304 +DATA 4 0x307900C0 0x0E447306 +DATA 4 0x307900C0 0x0E447304 // <= NOTE: Depending on JTAG device used, may need ~ 7 us pause at this point. +DATA 4 0x307900C0 0x0E407304 // DDR_PHY_ZQ_CON0 - End Manual ZQ + + +/* ============================================================================= + * Final Initialization start sequence + * ============================================================================= + */ + +DATA 4 0x30384130 0x00000000 // Disable Clock +DATA 4 0x30340020 0x00000178 // IOMUX_GRP_GRP8 - Start input to PHY +DATA 4 0x30384130 0x00000002 // Enable Clock +/* <= NOTE: Depending on JTAG device used, may need ~ 250 us pause at this point. */ diff --git a/board/novtech/meerkat96/meerkat96.c b/board/novtech/meerkat96/meerkat96.c new file mode 100644 index 0000000000..5fb4d43997 --- /dev/null +++ b/board/novtech/meerkat96/meerkat96.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Linaro Ltd. + * Copyright (C) 2016 NXP Semiconductors + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ + PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) + +static iomux_v3_cfg_t const meerkat96_pads[] = { + /* UART6 as debug serial */ + MX7D_PAD_SD1_CD_B__UART6_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), + MX7D_PAD_SD1_WP__UART6_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), + /* WDOG1 for reset */ + MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int dram_init(void) +{ + gd->ram_size = PHYS_SDRAM_SIZE; + + return 0; +} + +int board_early_init_f(void) +{ + imx_iomux_v3_setup_multiple_pads(meerkat96_pads, + ARRAY_SIZE(meerkat96_pads)); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +int checkboard(void) +{ + char *mode; + + if (IS_ENABLED(CONFIG_ARMV7_BOOT_SEC_DEFAULT)) + mode = "secure"; + else + mode = "non-secure"; + + printf("Board: i.MX7D Meerkat96 in %s mode\n", mode); + + return 0; +} + +int board_late_init(void) +{ + set_wdog_reset((struct wdog_regs *)WDOG1_BASE_ADDR); + + return 0; +} diff --git a/configs/meerkat96_defconfig b/configs/meerkat96_defconfig new file mode 100644 index 0000000000..a2b5194679 --- /dev/null +++ b/configs/meerkat96_defconfig @@ -0,0 +1,52 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX7=y +CONFIG_SYS_TEXT_BASE=0x87800000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_TARGET_MEERKAT96=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_ARMV7_BOOT_SEC_DEFAULT=y +# CONFIG_ARMV7_VIRT is not set +CONFIG_IMX_RDC=y +CONFIG_IMX_BOOTAUX=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/novtech/meerkat96/imximage.cfg" +CONFIG_BOUNCE_BUFFER=y +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_BOOTD is not set +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMI is not set +# CONFIG_CMD_XIMG is not set +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx7d-meerkat96" +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_GPIO=y +CONFIG_MMC_BROKEN_CD=y +CONFIG_DM_MMC=y +CONFIG_FSL_ESDHC=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX7=y +CONFIG_DM_PMIC=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_MXC_USB_OTG_HACTIVE=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y diff --git a/include/configs/meerkat96.h b/include/configs/meerkat96.h new file mode 100644 index 0000000000..d0450af954 --- /dev/null +++ b/include/configs/meerkat96.h @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2019 Linaro Ltd. + * Copyright (C) 2016 NXP Semiconductors + * + * Configuration settings for Meerkat96 board. + */ + +#ifndef __MEERKAT96_CONFIG_H +#define __MEERKAT96_CONFIG_H + +#include "mx7_common.h" +#include + +#define PHYS_SDRAM_SIZE SZ_512M + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* Environment configs */ +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET (8 * SZ_64K) + +/* USB configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) + +#endif