From 67b2ed024373f830ffe10fd19b2533d093664ec8 Mon Sep 17 00:00:00 2001 From: Vabhav Sharma Date: Wed, 9 Dec 2020 10:42:04 +0530 Subject: [PATCH] drivers: serial: probe all uart devices U-Boot DM model probe only single device at a time which is enabled and configured using device tree or platform data method. PL011 UART IP is SBSA compliant and firmware does the serial port set-up, initialization and let the kernel use UART port for sending and receiving characters. Normally software talk to one serial port time but some LayerScape platform require all the UART devices enabled in Linux for various use case. Adding support to probe all enabled serial devices like SBSA compliant PL011 UART ports probe and initialization by firmware. Signed-off-by: Vabhav Sharma Reviewed-by: Stefan Roese Reviewed-by: Simon Glass Reviewed-by: Sean Anderson --- drivers/serial/Kconfig | 16 ++++++++++++++++ drivers/serial/serial-uclass.c | 9 +++++++++ 2 files changed, 25 insertions(+) diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index b4805a2e4e..129494322c 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -134,6 +134,22 @@ config SERIAL_SEARCH_ALL If unsure, say N. +config SERIAL_PROBE_ALL + bool "Probe all available serial devices" + depends on DM_SERIAL + default n + help + The serial subsystem only probes for a single serial device, + but does not probe for other remaining serial devices. + With this option set, we make probing and searching for + all available devices optional. + Normally, U-Boot talks to one serial port at a time, but SBSA + compliant UART devices like PL011 require initialization + by firmware and to let the kernel use serial port for sending + and receiving the characters. + + If unsure, say N. + config SPL_DM_SERIAL bool "Enable Driver Model for serial drivers in SPL" depends on DM_SERIAL && SPL_DM diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 58a6541d8c..ead0193ad4 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -172,6 +172,15 @@ int serial_init(void) /* Called after relocation */ int serial_initialize(void) { + /* Scanning uclass to probe devices */ + if (IS_ENABLED(CONFIG_SERIAL_PROBE_ALL)) { + int ret; + + ret = uclass_probe_all(UCLASS_SERIAL); + if (ret) + return ret; + } + return serial_init(); }