rockchip: rk3399: Add Nanopc T4 board support

Add initial support for Nanopc T4 board.

Specification
- Rockchip RK3399
- Dual-Channel 4GB LPDDR3-1866
- SD card slot
- 16GB eMMC
- RTL8211E 1Gbps
- AP6356S WiFI/BT
- HDMI In/Out, DP, MIPI DSI/CSI, eDP
- USB 3.0, 2.0
- USB Type C power and data
- GPIO expansion ports
- DC 12V/2A

Commit details of rk3399-nanopc-t4.dts sync from Linux 5.1-rc2:
"arm64: dts: rockchip: Add NanoPC-T4 IR receiver"
(sha1: 95658e21b1707ad7844f873db2fdaa295109a5a3)

Tested-by: Daniel Gröber <dxld@darkboxed.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki 2019-05-08 11:11:47 +05:30 committed by Kever Yang
parent b2f5da9dd0
commit 65cc7dcd77
5 changed files with 164 additions and 0 deletions

View File

@ -106,6 +106,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-ficus.dtb \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
rk3399-nanopc-t4.dtb \
rk3399-nanopi-m4.dtb \
rk3399-orangepi.dtb \
rk3399-puma-ddr1333.dtb \

View File

@ -0,0 +1,7 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
*/
#include "rk3399-nanopi4-u-boot.dtsi"
#include "rk3399-sdram-lpddr3-samsung-4GB-1866.dtsi"

View File

@ -0,0 +1,91 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* FriendlyElec NanoPC-T4 board device tree source
*
* Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
* (http://www.friendlyarm.com)
*
* Copyright (c) 2018 Collabora Ltd.
*/
/dts-v1/;
#include "rk3399-nanopi4.dtsi"
/ {
model = "FriendlyElec NanoPC-T4";
compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
vcc12v0_sys: vcc12v0-sys {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <12000000>;
regulator-min-microvolt = <12000000>;
regulator-name = "vcc12v0_sys";
};
vcc5v0_host0: vcc5v0-host0 {
compatible = "regulator-fixed";
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc5v0_host0";
vin-supply = <&vcc5v0_sys>;
};
adc-keys {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <18000>;
};
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_rx>;
};
};
&pinctrl {
ir {
ir_rx: ir-rx {
/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
};
};
};
&sdhci {
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
};
&u2phy0_host {
phy-supply = <&vcc5v0_host0>;
};
&u2phy1_host {
phy-supply = <&vcc5v0_host0>;
};
&vcc5v0_sys {
vin-supply = <&vcc12v0_sys>;
};
&vcc3v3_sys {
vin-supply = <&vcc12v0_sys>;
};
&vbus_typec {
enable-active-high;
gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_sys>;
};

View File

@ -6,6 +6,12 @@ F: include/configs/evb_rk3399.h
F: configs/evb-rk3399_defconfig
F: configs/firefly-rk3399_defconfig
NANOPC-T4
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained
F: configs/nanopc-t4-rk3399_defconfig
F: arch/arm/dts/rk3399-nanopc-t4-u-boot.dtsi
NANOPI-M4
M: Jagan Teki <jagan@amarulasolutions.com>
S: Maintained

View File

@ -0,0 +1,59 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_TEXT_BASE=0x00200000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_ROCKCHIP_RK3399=y
CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DEBUG_UART=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_TEXT_BASE=0xff8c2000
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TIME=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="rk3399-nanopc-t4"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_PMIC_RK8XX=y
CONFIG_REGULATOR_PWM=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_ASIX88179=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_RTL8152=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_ERRNO_STR=y