diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a047552ed3..63ec02403a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1480,7 +1480,6 @@ source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" source "board/freescale/mx35pdk/Kconfig" source "board/freescale/s32v234evb/Kconfig" -source "board/gdsys/a38x/Kconfig" source "board/grinn/chiliboard/Kconfig" source "board/gumstix/pepper/Kconfig" source "board/h2200/Kconfig" diff --git a/arch/arm/dts/armada-388-clearfog-u-boot.dtsi b/arch/arm/dts/armada-388-clearfog-u-boot.dtsi new file mode 100644 index 0000000000..f31691ee94 --- /dev/null +++ b/arch/arm/dts/armada-388-clearfog-u-boot.dtsi @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ + +&spi1 { + u-boot,dm-spl; + + spi-flash@0 { + u-boot,dm-spl; + }; +}; diff --git a/arch/arm/dts/armada-388-clearfog.dts b/arch/arm/dts/armada-388-clearfog.dts index a0b566a5ae..16a47d59e6 100644 --- a/arch/arm/dts/armada-388-clearfog.dts +++ b/arch/arm/dts/armada-388-clearfog.dts @@ -50,6 +50,7 @@ #include #include #include "armada-388.dtsi" +#include "armada-38x-solidrun-microsom.dtsi" / { model = "SolidRun Clearfog A1"; @@ -70,11 +71,6 @@ stdout-path = "serial0:115200n8"; }; - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; /* 256 MB */ - }; - reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; @@ -84,211 +80,7 @@ }; soc { - ranges = ; - internal-regs { - ethernet@30000 { - mac-address = [00 50 43 02 02 02]; - phy-mode = "sgmii"; - status = "okay"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - ethernet@34000 { - mac-address = [00 50 43 02 02 03]; - managed = "in-band-status"; - phy-mode = "sgmii"; - status = "okay"; - }; - - ethernet@70000 { - mac-address = [00 50 43 02 02 01]; - pinctrl-0 = <&ge0_rgmii_pins>; - pinctrl-names = "default"; - phy = <&phy_dedicated>; - phy-mode = "rgmii-id"; - status = "okay"; - }; - - i2c@11000 { - /* Is there anything on this? */ - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - status = "okay"; - - /* - * PCA9655 GPIO expander, up to 1MHz clock. - * 0-CON3 CLKREQ# - * 1-CON3 PERST# - * 2-CON2 PERST# - * 3-CON3 W_DISABLE - * 4-CON2 CLKREQ# - * 5-USB3 overcurrent - * 6-USB3 power - * 7-CON2 W_DISABLE - * 8-JP4 P1 - * 9-JP4 P4 - * 10-JP4 P5 - * 11-m.2 DEVSLP - * 12-SFP_LOS - * 13-SFP_TX_FAULT - * 14-SFP_TX_DISABLE - * 15-SFP_MOD_DEF0 - */ - expander0: gpio-expander@20 { - /* - * This is how it should be: - * compatible = "onnn,pca9655", - * "nxp,pca9555"; - * but you can't do this because of - * the way I2C works. - */ - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - - pcie1_0_clkreq { - gpio-hog; - gpios = <0 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie1.0-clkreq"; - }; - pcie1_0_w_disable { - gpio-hog; - gpios = <3 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie1.0-w-disable"; - }; - pcie2_0_clkreq { - gpio-hog; - gpios = <4 GPIO_ACTIVE_LOW>; - input; - line-name = "pcie2.0-clkreq"; - }; - pcie2_0_w_disable { - gpio-hog; - gpios = <7 GPIO_ACTIVE_LOW>; - output-low; - line-name = "pcie2.0-w-disable"; - }; - usb3_ilimit { - gpio-hog; - gpios = <5 GPIO_ACTIVE_LOW>; - input; - line-name = "usb3-current-limit"; - }; - usb3_power { - gpio-hog; - gpios = <6 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "usb3-power"; - }; - m2_devslp { - gpio-hog; - gpios = <11 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "m.2 devslp"; - }; - }; - - /* The MCP3021 is 100kHz clock only */ - mikrobus_adc: mcp3021@4c { - compatible = "microchip,mcp3021"; - reg = <0x4c>; - }; - - /* Also something at 0x64 */ - }; - - i2c@11100 { - /* - * Routed to SFP, mikrobus, and PCIe. - * SFP limits this to 100kHz, and requires - * an AT24C01A/02/04 with address pins tied - * low, which takes addresses 0x50 and 0x51. - * Mikrobus doesn't specify beyond an I2C - * bus being present. - * PCIe uses ARP to assign addresses, or - * 0x63-0x64. - */ - clock-frequency = <100000>; - pinctrl-0 = <&clearfog_i2c1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - mdio@72004 { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - - pinctrl@18000 { - clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { - marvell,pins = "mpp46"; - marvell,function = "ref"; - }; - clearfog_dsa0_pins: clearfog-dsa0-pins { - marvell,pins = "mpp23", "mpp41"; - marvell,function = "gpio"; - }; - clearfog_i2c1_pins: i2c1-pins { - /* SFP, PCIe, mSATA, mikrobus */ - marvell,pins = "mpp26", "mpp27"; - marvell,function = "i2c1"; - }; - clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { - marvell,pins = "mpp20"; - marvell,function = "gpio"; - }; - clearfog_sdhci_pins: clearfog-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; - clearfog_spi1_cs_pins: spi1-cs-pins { - marvell,pins = "mpp55"; - marvell,function = "spi1"; - }; - mikro_pins: mikro-pins { - /* int: mpp22 rst: mpp29 */ - marvell,pins = "mpp22", "mpp29"; - marvell,function = "gpio"; - }; - mikro_spi_pins: mikro-spi-pins { - marvell,pins = "mpp43"; - marvell,function = "spi1"; - }; - mikro_uart_pins: mikro-uart-pins { - marvell,pins = "mpp24", "mpp25"; - marvell,function = "ua1"; - }; - rear_button_pins: rear-button-pins { - marvell,pins = "mpp34"; - marvell,function = "gpio"; - }; - }; - rtc@a3800 { /* * If the rtc doesn't work, run "date reset" @@ -311,7 +103,7 @@ bus-width = <4>; cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; no-1-8-v; - pinctrl-0 = <&clearfog_sdhci_pins + pinctrl-0 = <µsom_sdhci_pins &clearfog_sdhci_cd_pins>; pinctrl-names = "default"; status = "okay"; @@ -319,13 +111,6 @@ wp-inverted; }; - serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - status = "okay"; - u-boot,dm-pre-reloc; - }; - serial@12100 { /* mikrobus uart */ pinctrl-0 = <&mikro_uart_pins>; @@ -342,17 +127,10 @@ pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; pinctrl-names = "default"; status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor", "spi-flash"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - }; }; - usb3@f8000 { + usb0: usb3@f8000 { + /* CON7, USB-A port on back of device */ status = "okay"; }; }; @@ -376,72 +154,6 @@ }; }; - sfp: sfp { - compatible = "sff,sfp"; - i2c-bus = <&i2c1>; - los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>; - moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>; - sfp,ethernet = <ð2>; - tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; - }; - - dsa@0 { - compatible = "marvell,dsa"; - dsa,ethernet = <ð1>; - dsa,mii-bus = <&mdio>; - pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; - pinctrl-names = "default"; - #address-cells = <2>; - #size-cells = <0>; - - switch@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4 0>; - - port@0 { - reg = <0>; - label = "lan1"; - }; - - port@1 { - reg = <1>; - label = "lan2"; - }; - - port@2 { - reg = <2>; - label = "lan3"; - }; - - port@3 { - reg = <3>; - label = "lan4"; - }; - - port@4 { - reg = <4>; - label = "lan5"; - }; - - port@5 { - reg = <5>; - label = "cpu"; - }; - - port@6 { - /* 88E1512 external phy */ - reg = <6>; - label = "lan6"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&rear_button_pins>; @@ -457,6 +169,159 @@ }; }; +&w25q32 { + status = "okay"; +}; + +ð1 { + managed = "in-band-status"; + phy-mode = "sgmii"; + status = "okay"; +}; + +ð2 { + phy-mode = "sgmii"; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* + * PCA9655 GPIO expander, up to 1MHz clock. + * 0-CON3 CLKREQ# + * 1-CON3 PERST# + * 2-CON2 PERST# + * 3-CON3 W_DISABLE + * 4-CON2 CLKREQ# + * 5-USB3 overcurrent + * 6-USB3 power + * 7-CON2 W_DISABLE + * 8-JP4 P1 + * 9-JP4 P4 + * 10-JP4 P5 + * 11-m.2 DEVSLP + * 12-SFP_LOS + * 13-SFP_TX_FAULT + * 14-SFP_TX_DISABLE + * 15-SFP_MOD_DEF0 + */ + expander0: gpio-expander@20 { + /* + * This is how it should be: + * compatible = "onnn,pca9655", + * "nxp,pca9555"; + * but you can't do this because of + * the way I2C works. + */ + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + + pcie1_0_clkreq { + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie1.0-clkreq"; + }; + pcie1_0_w_disable { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie1.0-w-disable"; + }; + pcie2_0_clkreq { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "pcie2.0-clkreq"; + }; + pcie2_0_w_disable { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "pcie2.0-w-disable"; + }; + usb3_ilimit { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + input; + line-name = "usb3-current-limit"; + }; + usb3_power { + gpio-hog; + gpios = <6 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb3-power"; + }; + m2_devslp { + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "m.2 devslp"; + }; + }; + + mikrobus_adc: mcp3021@4c { + compatible = "microchip,mcp3021"; + reg = <0x4c>; + }; +}; + +&i2c1 { + /* + * Routed to SFP, mikrobus, and PCIe. + * SFP limits this to 100kHz, and requires + * an AT24C01A/02/04 with address pins tied + * low, which takes addresses 0x50 and 0x51. + * Mikrobus doesn't specify beyond an I2C + * bus being present. + * PCIe uses ARP to assign addresses, or + * 0x63-0x64. + */ + clock-frequency = <100000>; + pinctrl-0 = <&clearfog_i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pinctrl { + clearfog_i2c1_pins: i2c1-pins { + /* SFP, PCIe, mSATA, mikrobus */ + marvell,pins = "mpp26", "mpp27"; + marvell,function = "i2c1"; + }; + clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + clearfog_spi1_cs_pins: spi1-cs-pins { + marvell,pins = "mpp55"; + marvell,function = "spi1"; + }; + mikro_pins: mikro-pins { + /* int: mpp22 rst: mpp29 */ + marvell,pins = "mpp22", "mpp29"; + marvell,function = "gpio"; + }; + mikro_spi_pins: mikro-spi-pins { + marvell,pins = "mpp43"; + marvell,function = "spi1"; + }; + mikro_uart_pins: mikro-uart-pins { + marvell,pins = "mpp24", "mpp25"; + marvell,function = "ua1"; + }; + rear_button_pins: rear-button-pins { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; +}; + /* +#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 MPP18: gpio ? (pca9655 int?) diff --git a/arch/arm/dts/armada-388-helios4.dts b/arch/arm/dts/armada-388-helios4.dts index 049d322964..a154e0f4f4 100644 --- a/arch/arm/dts/armada-388-helios4.dts +++ b/arch/arm/dts/armada-388-helios4.dts @@ -248,7 +248,7 @@ bus-width = <4>; cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; no-1-8-v; - pinctrl-0 = <&helios_sdhci_pins + pinctrl-0 = <µsom_sdhci_pins &helios_sdhci_cd_pins>; pinctrl-names = "default"; status = "okay"; @@ -286,12 +286,6 @@ marvell,pins = "mpp20"; marvell,function = "gpio"; }; - helios_sdhci_pins: helios-sdhci-pins { - marvell,pins = "mpp21", "mpp28", - "mpp37", "mpp38", - "mpp39", "mpp40"; - marvell,function = "sd0"; - }; helios_led_pins: helios-led-pins { marvell,pins = "mpp24", "mpp25", "mpp49", "mpp50", diff --git a/arch/arm/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/dts/armada-38x-solidrun-microsom.dtsi index a2627223ce..74f58de85c 100644 --- a/arch/arm/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/dts/armada-38x-solidrun-microsom.dtsi @@ -86,7 +86,7 @@ w25q32: spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "w25q32", "jedec,spi-nor"; + compatible = "w25q32", "jedec,spi-nor", "spi-flash"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <3000000>; status = "disabled"; diff --git a/arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts b/arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts new file mode 100644 index 0000000000..c234449936 --- /dev/null +++ b/arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-98dx4122.dtsi" + +/ { + model = "Allied Telesis SBx81LIFXCAT Board"; + compatible = "atl,SBx8LIFXCAT", "marvell,kirkwood-98DX4122", + "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + stdout-path = &uart0; + }; + + aliases { + ethernet0 = ð0; + i2c0 = &i2c0; + spi0 = &spi0; + }; + + dsa { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + dsa,ethernet = <ð0>; + dsa,mii-bus = <&mdio>; + status = "okay"; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1 0>; + + port@0 { + reg = <0>; + label = "internal0"; + }; + port@1 { + reg = <1>; + label = "internal1"; + }; + port@8 { + reg = <8>; + label = "internal8"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@9 { + reg = <9>; + label = "internal9"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + port@10 { + reg = <10>; + label = "cpu"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + ledn { + label = "status:ledn"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + }; + + ledp { + label = "status:ledp"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor", "spi-flash"; + reg = <0>; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@u-boot { + reg = <0x00000000 0x00c00000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00c00000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00100000 0x00f00000>; + label = "unused"; + }; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; + + gpio3: gpio@76 { + #gpio-cells = <2>; + compatible = "nxp,pca9539"; + reg = <0x76>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&mdio { + status = "okay"; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + speed = <1000>; + duplex = <1>; + }; +}; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 5a5a63cea7..3b860c4f55 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -62,6 +62,9 @@ config TARGET_NSA310S config TARGET_SBx81LIFKW bool "Allied Telesis SBx81GS24/SBx81GT40/SBx81XS6/SBx81XS16" +config TARGET_SBx81LIFXCAT + bool "Allied Telesis SBx81GP24/SBx81GT24" + endchoice config SYS_SOC @@ -85,5 +88,6 @@ source "board/Seagate/goflexhome/Kconfig" source "board/Seagate/nas220/Kconfig" source "board/zyxel/nsa310s/Kconfig" source "board/alliedtelesis/SBx81LIFKW/Kconfig" +source "board/alliedtelesis/SBx81LIFXCAT/Kconfig" endif diff --git a/board/gdsys/a38x/.gitignore b/arch/arm/mach-mvebu/.gitignore similarity index 100% rename from board/gdsys/a38x/.gitignore rename to arch/arm/mach-mvebu/.gitignore diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 3df124c6a8..d1f71338ac 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -148,6 +148,7 @@ config SYS_BOARD default "ds414" if TARGET_DS414 default "maxbcm" if TARGET_MAXBCM default "theadorable" if TARGET_THEADORABLE + default "a38x" if TARGET_CONTROLCENTERDC config SYS_CONFIG_NAME default "clearfog" if TARGET_CLEARFOG @@ -163,6 +164,7 @@ config SYS_CONFIG_NAME default "theadorable" if TARGET_THEADORABLE default "turris_omnia" if TARGET_TURRIS_OMNIA default "turris_mox" if TARGET_TURRIS_MOX + default "controlcenterdc" if TARGET_CONTROLCENTERDC config SYS_VENDOR default "Marvell" if TARGET_DB_MV784MP_GP @@ -176,25 +178,26 @@ config SYS_VENDOR default "Synology" if TARGET_DS414 default "CZ.NIC" if TARGET_TURRIS_OMNIA default "CZ.NIC" if TARGET_TURRIS_MOX + default "gdsys" if TARGET_CONTROLCENTERDC config SYS_SOC default "mvebu" -if TARGET_TURRIS_OMNIA - choice - prompt "Turris Omnia boot method" + prompt "Boot method" -config TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI +config MVEBU_SPL_BOOT_DEVICE_SPI bool "SPI NOR flash" -config TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC +config MVEBU_SPL_BOOT_DEVICE_MMC bool "SDIO/MMC card" + select SPL_LIBDISK_SUPPORT + +config MVEBU_SPL_BOOT_DEVICE_UART + bool "UART" endchoice -endif - config MVEBU_EFUSE bool "Enable eFuse support" default n diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index ade7b87064..ee2eca9134 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -25,6 +25,39 @@ obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o obj-$(CONFIG_MVEBU_EFUSE) += efuse.o + +extra-y += kwbimage.cfg + +KWB_REPLACE += BOOT_FROM +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI),) + KWB_CFG_BOOT_FROM=spi +endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC),) + KWB_CFG_BOOT_FROM=sdio +endif +ifneq ($(CONFIG_MVEBU_SPL_BOOT_DEVICE_UART),) + KWB_CFG_BOOT_FROM=uart +endif + +ifneq ($(CONFIG_SECURED_MODE_IMAGE),) +KWB_REPLACE += CSK_INDEX +KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) + +KWB_REPLACE += SEC_BOOT_DEV +KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ + $(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ + $(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ + ) + +KWB_REPLACE += SEC_FUSE_DUMP +KWB_CFG_SEC_FUSE_DUMP = a38x +endif + +$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ + include/config/auto.conf + $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ + <$< >$(dir $<)$(@F) + endif # CONFIG_SPL_BUILD obj-y += gpio.o obj-y += mbus.o diff --git a/arch/arm/mach-mvebu/include/mach/config.h b/arch/arm/mach-mvebu/include/mach/config.h index 2acfd3314a..9f51411e43 100644 --- a/arch/arm/mach-mvebu/include/mach/config.h +++ b/arch/arm/mach-mvebu/include/mach/config.h @@ -32,12 +32,12 @@ #endif /* - * By default kwbimage.cfg from board specific folder is used + * By default the generated mvebu kwbimage.cfg is used * If for some board, different configuration file need to be used, * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file */ #ifndef CONFIG_SYS_KWD_CONFIG -#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_SYS_KWD_CONFIG arch/arm/mach-mvebu/kwbimage.cfg #endif /* CONFIG_SYS_KWD_CONFIG */ /* Add target to build it automatically upon "make" */ diff --git a/board/gdsys/a38x/kwbimage.cfg.in b/arch/arm/mach-mvebu/kwbimage.cfg.in similarity index 100% rename from board/gdsys/a38x/kwbimage.cfg.in rename to arch/arm/mach-mvebu/kwbimage.cfg.in diff --git a/board/CZ.NIC/turris_omnia/kwbimage.cfg b/board/CZ.NIC/turris_omnia/kwbimage.cfg deleted file mode 100644 index cc05792556..0000000000 --- a/board/CZ.NIC/turris_omnia/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl.bin 0000005b 00000068 diff --git a/board/Marvell/db-88f6720/kwbimage.cfg b/board/Marvell/db-88f6720/kwbimage.cfg deleted file mode 100644 index 1f748db37c..0000000000 --- a/board/Marvell/db-88f6720/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-88f6820-amc/kwbimage.cfg b/board/Marvell/db-88f6820-amc/kwbimage.cfg deleted file mode 100644 index 1f748db37c..0000000000 --- a/board/Marvell/db-88f6820-amc/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-88f6820-gp/kwbimage.cfg b/board/Marvell/db-88f6820-gp/kwbimage.cfg deleted file mode 100644 index 1f748db37c..0000000000 --- a/board/Marvell/db-88f6820-gp/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Marvell/db-mv784mp-gp/kwbimage.cfg b/board/Marvell/db-mv784mp-gp/kwbimage.cfg deleted file mode 100644 index 1f748db37c..0000000000 --- a/board/Marvell/db-mv784mp-gp/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/Synology/ds414/kwbimage.cfg b/board/Synology/ds414/kwbimage.cfg deleted file mode 100644 index 1f748db37c..0000000000 --- a/board/Synology/ds414/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/alliedtelesis/SBx81LIFXCAT/Kconfig b/board/alliedtelesis/SBx81LIFXCAT/Kconfig new file mode 100644 index 0000000000..524c290089 --- /dev/null +++ b/board/alliedtelesis/SBx81LIFXCAT/Kconfig @@ -0,0 +1,12 @@ +if TARGET_SBx81LIFXCAT + +config SYS_BOARD + default "SBx81LIFXCAT" + +config SYS_VENDOR + default "alliedtelesis" + +config SYS_CONFIG_NAME + default "SBx81LIFXCAT" + +endif diff --git a/board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS b/board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS new file mode 100644 index 0000000000..6b722ded25 --- /dev/null +++ b/board/alliedtelesis/SBx81LIFXCAT/MAINTAINERS @@ -0,0 +1,7 @@ +SBx81LIFXCAT BOARD +M: Chris Packham +S: Maintained +F: board/alliedtelesis/SBx81LIFXCAT/ +F: include/configs/SBx81LIFXCAT +F: configs/SBx81LIFXCAT_defconfig +F: arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts diff --git a/board/alliedtelesis/SBx81LIFXCAT/Makefile b/board/alliedtelesis/SBx81LIFXCAT/Makefile new file mode 100644 index 0000000000..f21c8ef9d6 --- /dev/null +++ b/board/alliedtelesis/SBx81LIFXCAT/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2010, 2018 +# Allied Telesis +# + +obj-y += sbx81lifxcat.o diff --git a/board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg b/board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg new file mode 100644 index 0000000000..53d4812f34 --- /dev/null +++ b/board/alliedtelesis/SBx81LIFXCAT/kwbimage.cfg @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# (C) Copyright 2018 Allied Telesis +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM spi # Boot from SPI flash + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed +DATA 0xffd100e0 0x1b1b1b1b +DATA 0xffd20134 0xffffffff +DATA 0xffd20138 0x009fffff +DATA 0xffd20154 0x00000000 +DATA 0xffd2014c 0x00000000 +DATA 0xffd20148 0x00000001 + +# Dram initalization for 1 x x16 +# DDR II Micron part number MT47H64M16HR-3 +# MClk 333MHz, Size 128MB, ECC disable +# +DATA 0xffd01400 0x43000618 +DATA 0xffd01404 0x38543000 +DATA 0xffd01408 0x23125441 +DATA 0xffd0140c 0x00000832 +DATA 0xffd01410 0x0000000D +DATA 0xffd01414 0x00000000 +DATA 0xffd01418 0x00000000 +DATA 0xffd0141c 0x00000652 +DATA 0xffd01420 0x00000042 +DATA 0xffd01424 0x0000F0FF +DATA 0xffd01428 0x00074410 +DATA 0xffd0147C 0x00007441 +DATA 0xffd01500 0x00000000 # SDRAM CS[0] Base address at 0x00000000 +DATA 0xffd01504 0x07FFFFF1 # SDRAM CS[0] Size 128MiB +DATA 0xffd01508 0x10000000 +DATA 0xffd0150c 0x00FFFFF4 # SDRAM CS[1] Size, window disabled +DATA 0xffd01514 0x00FFFFF8 # SDRAM CS[2] Size, window disabled +DATA 0xffd0151c 0x00FFFFFC # SDRAM CS[3] Size, window disabled +DATA 0xffd01494 0x84210000 +DATA 0xffd01498 0x00000000 +DATA 0xffd0149c 0x0000F80F +DATA 0xffd01480 0x00000001 + +# End of Header extension +DATA 0x0 0x0 diff --git a/board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c b/board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c new file mode 100644 index 0000000000..c584fc0e98 --- /dev/null +++ b/board/alliedtelesis/SBx81LIFXCAT/sbx81lifxcat.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2010, 2018 + * Allied Telesis + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SBX81LIFXCAT_OE_LOW (~0) +#define SBX81LIFXCAT_OE_HIGH (~BIT(11)) +#define SBX81LIFXCAT_OE_VAL_LOW (0) +#define SBX81LIFXCAT_OE_VAL_HIGH (BIT(11)) + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + mvebu_config_gpio(SBX81LIFXCAT_OE_VAL_LOW, + SBX81LIFXCAT_OE_VAL_HIGH, + SBX81LIFXCAT_OE_LOW, SBX81LIFXCAT_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + static const u32 kwmpp_config[] = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_GPIO, + MPP16_GPIO, + MPP17_GPIO, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GE1_8, + MPP29_GE1_9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GPIO, + MPP35_GPIO, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_GPIO, + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + MPP49_GPIO, + 0 + }; + + kirkwood_mpp_conf(kwmpp_config, NULL); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; + + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +/* automatically defined by kirkwood config.h */ +void reset_phy(void) +{ +} +#endif + +#ifdef CONFIG_MV88E61XX_SWITCH +int mv88e61xx_hw_reset(struct phy_device *phydev) +{ + phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; + + return 0; +} +#endif + +#ifdef CONFIG_MISC_INIT_R +int misc_init_r(void) +{ + struct udevice *dev; + int ret; + + ret = led_get_by_label("status:ledp", &dev); + if (!ret) + led_set_state(dev, LEDST_ON); + + ret = led_get_by_label("status:ledn", &dev); + if (!ret) + led_set_state(dev, LEDST_OFF); + + return 0; +} +#endif diff --git a/board/gdsys/a38x/Kconfig b/board/gdsys/a38x/Kconfig deleted file mode 100644 index 3fdef64b59..0000000000 --- a/board/gdsys/a38x/Kconfig +++ /dev/null @@ -1,36 +0,0 @@ -if TARGET_CONTROLCENTERDC - -config SYS_BOARD - default "a38x" - -config SYS_VENDOR - default "gdsys" - -config SYS_SOC - default "mvebu" - -config SYS_CONFIG_NAME - default "controlcenterdc" - -menu "Controlcenter DC board options" - -choice - prompt "Select boot method" - -config SPL_BOOT_DEVICE_SPI - bool "SPI" - -config SPL_BOOT_DEVICE_MMC - bool "MMC" - select SPL_LIBDISK_SUPPORT - -endchoice - -#config SPL_BOOT_DEVICE -# int -# default 1 if SPL_BOOT_DEVICE_SPI -# default 2 if SPL_BOOT_DEVICE_MMC - -endmenu - -endif diff --git a/board/gdsys/a38x/Makefile b/board/gdsys/a38x/Makefile index 43fec2edbb..32fffab467 100644 --- a/board/gdsys/a38x/Makefile +++ b/board/gdsys/a38x/Makefile @@ -7,36 +7,5 @@ obj-$(CONFIG_TARGET_CONTROLCENTERDC) += controlcenterdc.o hre.o spl.o keyprogram.o dt_helpers.o ifeq ($(CONFIG_SPL_BUILD),) - obj-$(CONFIG_TARGET_CONTROLCENTERDC) += hydra.o ihs_phys.o - -extra-$(CONFIG_TARGET_CONTROLCENTERDC) += kwbimage.cfg - -KWB_REPLACE += BOOT_FROM -ifneq ($(CONFIG_SPL_BOOT_DEVICE_SPI),) - KWB_CFG_BOOT_FROM=spi -endif -ifneq ($(CONFIG_SPL_BOOT_DEVICE_MMC),) - KWB_CFG_BOOT_FROM=sdio -endif - -ifneq ($(CONFIG_SECURED_MODE_IMAGE),) -KWB_REPLACE += CSK_INDEX -KWB_CFG_CSK_INDEX = $(CONFIG_SECURED_MODE_CSK_INDEX) - -KWB_REPLACE += SEC_BOOT_DEV -KWB_CFG_SEC_BOOT_DEV=$(patsubst "%",%, \ - $(if $(findstring BOOT_SPI_NOR_FLASH,$(CONFIG_SPL_BOOT_DEVICE)),0x34) \ - $(if $(findstring BOOT_SDIO_MMC_CARD,$(CONFIG_SPL_BOOT_DEVICE)),0x31) \ - ) - -KWB_REPLACE += SEC_FUSE_DUMP -KWB_CFG_SEC_FUSE_DUMP = a38x -endif - -$(src)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \ - include/config/auto.conf - $(Q)sed -ne '$(foreach V,$(KWB_REPLACE),s/^#@$(V)/$(V) $(KWB_CFG_$(V))/;)p' \ - <$< >$(dir $<)$(@F) - endif diff --git a/board/kobol/helios4/kwbimage.cfg b/board/kobol/helios4/kwbimage.cfg deleted file mode 100644 index 035063bc90..0000000000 --- a/board/kobol/helios4/kwbimage.cfg +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2015 Stefan Roese -# - -# Armada 38x use version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM sdio - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/maxbcm/kwbimage.cfg b/board/maxbcm/kwbimage.cfg deleted file mode 100644 index 1f748db37c..0000000000 --- a/board/maxbcm/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2014 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/solidrun/clearfog/kwbimage.cfg b/board/solidrun/clearfog/kwbimage.cfg deleted file mode 100644 index f41d25a8a1..0000000000 --- a/board/solidrun/clearfog/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2015 Stefan Roese -# - -# Armada 38x use version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM sdio - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/board/theadorable/kwbimage.cfg b/board/theadorable/kwbimage.cfg deleted file mode 100644 index 4f3b7b23f3..0000000000 --- a/board/theadorable/kwbimage.cfg +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2015-2016 Stefan Roese -# - -# Armada XP uses version 1 image format -VERSION 1 - -# Boot Media configurations -BOOT_FROM spi - -# Binary Header (bin_hdr) with DDR3 training code -BINARY spl/u-boot-spl-dtb.bin 0000005b 00000068 diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index 348f861a14..c786120e7f 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -35,5 +35,7 @@ CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=10 CONFIG_MV88E61XX_PHY_PORTS=0x003 CONFIG_MV88E61XX_FIXED_PORTS=0x300 +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SPI=y CONFIG_KIRKWOOD_SPI=y diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig new file mode 100644 index 0000000000..89921a5c0d --- /dev/null +++ b/configs/SBx81LIFXCAT_defconfig @@ -0,0 +1,44 @@ +CONFIG_ARM=y +CONFIG_KIRKWOOD=y +CONFIG_SYS_TEXT_BASE=0x00600000 +CONFIG_TARGET_SBx81LIFXCAT=y +CONFIG_IDENT_STRING="\nSBx81LIFXCAT" +CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifxcat" +# CONFIG_SYS_MALLOC_F is not set +CONFIG_BOOTDELAY=3 +CONFIG_SILENT_CONSOLE=y +CONFIG_SILENT_U_BOOT_ONLY=y +CONFIG_HUSH_PARSER=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_SF=y +CONFIG_CMD_DHCP=y +CONFIG_BOOTP_NTPSERVER=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_SNTP=y +# CONFIG_CMD_LED is not set +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_DM=y +CONFIG_DM_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +# CONFIG_MMC is not set +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_MV88E61XX_SWITCH=y +CONFIG_MV88E61XX_CPU_PORT=10 +CONFIG_MV88E61XX_PHY_PORTS=0x003 +CONFIG_MV88E61XX_FIXED_PORTS=0x300 +CONFIG_MV88E61XX_RGMII_DELAY=y +CONFIG_SPI=y +CONFIG_KIRKWOOD_SPI=y diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 7a9ee51017..2164e20a3f 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -6,12 +6,12 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_CLEARFOG=y +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xd0012000 CONFIG_DEBUG_UART_CLOCK=250000000 -CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog" CONFIG_DEBUG_UART=y CONFIG_DISTRO_DEFAULTS=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index f0ed209928..d77f7766ee 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_DNS325=y CONFIG_IDENT_STRING="\nD-Link DNS-325" CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325" +# CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,7 +17,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_CMD_JFFS2=y @@ -26,10 +26,13 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 8090c9a377..d7428ae9cd 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_DREAMPLUG=y CONFIG_IDENT_STRING="\nMarvell-DreamPlug" CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug" +# CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -15,19 +16,21 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_KIRKWOOD_SPI=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index c9207433b3..6428614c93 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_DS109=y CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ds109" +# CONFIG_SYS_MALLOC_F is not set CONFIG_HUSH_PARSER=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_IDE=y @@ -12,18 +13,22 @@ CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_DHCP=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_FAT=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_KIRKWOOD_SPI=y diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig index c0894c05ea..41d896a725 100644 --- a/configs/goflexhome_defconfig +++ b/configs/goflexhome_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_GOFLEXHOME=y CONFIG_IDENT_STRING="\nSeagate GoFlex Home" CONFIG_DEFAULT_DEVICE_TREE="kirkwood-goflexnet" +# CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 CONFIG_CONSOLE_MUX=y # CONFIG_DISPLAY_BOARDINFO is not set @@ -16,7 +17,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y @@ -27,10 +27,13 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index da3895d4db..d77922e2a7 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_GURUPLUG=y CONFIG_IDENT_STRING="\nMarvell-GuruPlug" CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus" +# CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -16,7 +17,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y @@ -27,10 +27,13 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/helios4_defconfig b/configs/helios4_defconfig index 441b3752d1..f1eddaff5d 100644 --- a/configs/helios4_defconfig +++ b/configs/helios4_defconfig @@ -5,6 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_HELIOS4=y +CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index ddf5689bf4..4ae69fe71a 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -4,6 +4,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_NAS220=y CONFIG_IDENT_STRING="\nNAS 220" CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220" +# CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -16,7 +17,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y @@ -27,10 +27,13 @@ CONFIG_EFI_PARTITION=y # CONFIG_PARTITION_UUIDS is not set CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y # CONFIG_MMC is not set CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/configs/sheevaplug_defconfig b/configs/sheevaplug_defconfig index d27698fcce..b965ff442a 100644 --- a/configs/sheevaplug_defconfig +++ b/configs/sheevaplug_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x600000 CONFIG_TARGET_SHEEVAPLUG=y CONFIG_IDENT_STRING="\nMarvell-Sheevaplug" CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug" +# CONFIG_SYS_MALLOC_F is not set CONFIG_BOOTDELAY=3 # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_HUSH_PARSER=y @@ -18,7 +19,6 @@ CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y -CONFIG_CMD_DATE=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y @@ -29,9 +29,12 @@ CONFIG_CMD_UBI=y CONFIG_ISO_PARTITION=y CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y +CONFIG_DM=y CONFIG_MVSATA_IDE=y CONFIG_NETDEVICES=y CONFIG_MVGBE=y +CONFIG_DM_RTC=y +CONFIG_RTC_MV=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index bcc2c201d2..24712662d4 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -109,11 +109,6 @@ #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ #endif /* CONFIG_CMD_NET */ -/* - * Time settings - */ -#define CONFIG_RTC_MV - #define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ #endif /* _CONFIG_SBX81LIFKW_H */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h new file mode 100644 index 0000000000..0491832fee --- /dev/null +++ b/include/configs/SBx81LIFXCAT.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * (C) Copyright 2016 Allied Telesis + */ + +#ifndef _CONFIG_SBX81LIFXCAT_H +#define _CONFIG_SBX81LIFXCAT_H + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#define CONFIG_BUILD_TARGET "u-boot.kwb" + +/* additions for new ARM relocation support */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 + +#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ +#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ +#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ +#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ +#define CONFIG_KIRKWOOD_GPIO 1 + +#define CONFIG_MISC_INIT_R /* call misc_init_r */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK +#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE + +/* + * Serial Port configuration + * The following definitions let you select what serial you want to use + * for your console driver. + */ + +#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ + +#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" +#define MTDPARTS_MTDOOPS "errlog" +#define CONFIG_DOS_PARTITION + +/* + * Environment variables configurations + */ +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */ +#define CONFIG_ENV_SIZE 0x02000 +#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here - 768K */ + +/* + * U-Boot bootcode configuration + */ + +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ + +/* size in bytes reserved for initial data */ + +#include +/* There is no PHY directly connected so don't ask it for link status */ +#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN + +/* + * Other required minimal configurations + */ +#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ +#define CONFIG_NR_DRAM_BANKS 4 +#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ +#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ +#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* specify more that one ports available */ +#define CONFIG_MII /* expose smi over miiphy interface */ +#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ +#define CONFIG_PHY_BASE_ADR 0x01 +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#endif /* CONFIG_CMD_NET */ + +#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ + +#endif /* _CONFIG_SBX81LIFXCAT_H */ diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h index 1141aee08b..7d56dfd86e 100644 --- a/include/configs/clearfog.h +++ b/include/configs/clearfog.h @@ -70,16 +70,6 @@ "initrd_high=0x10000000\0" /* SPL */ -/* - * Select the boot device here - * - * Currently supported are: - * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash - * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1) - */ -#define SPL_BOOT_SPI_NOR_FLASH 1 -#define SPL_BOOT_SDIO_MMC_CARD 2 -#define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD /* Defines for SPL */ #define CONFIG_SPL_SIZE (140 << 10) @@ -96,13 +86,11 @@ #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH +#if defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI) /* SPL related SPI defines */ #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS -#endif - -#if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD +#elif defined(CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC) /* SPL related MMC defines */ #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS diff --git a/include/configs/dns325.h b/include/configs/dns325.h index 0d52ffb4d7..8658c80fdc 100644 --- a/include/configs/dns325.h +++ b/include/configs/dns325.h @@ -54,13 +54,6 @@ #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif - /* * Enable GPI0 support */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h index 29e104f3c6..1d69a4e518 100644 --- a/include/configs/goflexhome.h +++ b/include/configs/goflexhome.h @@ -93,11 +93,4 @@ #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #endif /*CONFIG_MVSATA_IDE*/ -/* - * * RTC driver configuration - * */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/mv-plug-common.h b/include/configs/mv-plug-common.h index 81c07a889a..f424e2cc6c 100644 --- a/include/configs/mv-plug-common.h +++ b/include/configs/mv-plug-common.h @@ -22,11 +22,4 @@ */ #include "mv-common.h" -/* - * RTC driver configuration - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #endif /* _CONFIG_MARVELL_PLUG_H */ diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index d1331096f2..5015bc74bb 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -66,6 +66,8 @@ #define CONFIG_SF_DEFAULT_SPEED 1000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ /* Environment in SPI NOR flash */ #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ diff --git a/include/configs/nas220.h b/include/configs/nas220.h index b37705e26e..ca5cb2a838 100644 --- a/include/configs/nas220.h +++ b/include/configs/nas220.h @@ -107,13 +107,6 @@ * EFI partition */ -/* - * Date Time - */ -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_MV -#endif /* CONFIG_CMD_DATE */ - #define CONFIG_KIRKWOOD_GPIO #endif /* _CONFIG_NAS220_H */ diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index 9d4d0dfbb2..44d5016fbf 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -93,13 +93,13 @@ #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) #define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI /* SPL related SPI defines */ # define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 # define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS #endif -#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC +#ifdef CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC /* SPL related MMC defines */ # define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) # define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS diff --git a/tools/kwboot.c b/tools/kwboot.c index 8a421cda4e..50ae2b4b77 100644 --- a/tools/kwboot.c +++ b/tools/kwboot.c @@ -182,7 +182,7 @@ kwboot_tty_recv(int fd, void *buf, size_t len, int timeo) } n = read(fd, buf, len); - if (n < 0) + if (n <= 0) goto out; buf = (char *)buf + n; @@ -466,7 +466,7 @@ kwboot_term_pipe(int in, int out, char *quit, int *s) char _buf[128], *buf = _buf; nin = read(in, buf, sizeof(buf)); - if (nin < 0) + if (nin <= 0) return -1; if (quit) { @@ -821,7 +821,7 @@ main(int argc, char **argv) perror("debugmsg"); goto out; } - } else { + } else if (bootmsg) { rc = kwboot_bootmsg(tty, bootmsg); if (rc) { perror("bootmsg");