Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'

This commit is contained in:
Albert ARIBAUD 2013-07-10 20:40:47 +02:00
commit 630aacb085
48 changed files with 1191 additions and 2023 deletions

View File

@ -22,10 +22,19 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS += clock.o power.o soc.o system.o pinmux.o tzpc.o
COBJS-y += clock.o power.o soc.o system.o pinmux.o tzpc.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_EXYNOS5) += clock_init_exynos5.o
COBJS-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o
COBJS-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o
COBJS-y += spl_boot.o
COBJS-y += lowlevel_init.o
endif
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
all: $(obj).depend $(LIB)

View File

@ -27,6 +27,10 @@
#include <asm/arch/clk.h>
#include <asm/arch/periph.h>
#define PLL_DIV_1024 1024
#define PLL_DIV_65535 65535
#define PLL_DIV_65536 65536
/* *
* This structure is to store the src bit, div bit and prediv bit
* positions of the peripheral clocks of the src and div registers
@ -85,6 +89,7 @@ static struct set_epll_con_val exynos5_epll_div[] = {
static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
{
unsigned long m, p, s = 0, mask, fout;
unsigned int div;
unsigned int freq;
/*
* APLL_CON: MIDV [25:16]
@ -110,14 +115,42 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
if (pllreg == EPLL) {
k = k & 0xffff;
/* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */
fout = (m + k / 65536) * (freq / (p * (1 << s)));
fout = (m + k / PLL_DIV_65536) * (freq / (p * (1 << s)));
} else if (pllreg == VPLL) {
k = k & 0xfff;
/* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */
fout = (m + k / 1024) * (freq / (p * (1 << s)));
/*
* Exynos4210
* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV)
*
* Exynos4412
* FOUT = (MDIV + K / 65535) * FIN / (PDIV * 2^SDIV)
*
* Exynos5250
* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV)
*/
if (proid_is_exynos4210())
div = PLL_DIV_1024;
else if (proid_is_exynos4412())
div = PLL_DIV_65535;
else if (proid_is_exynos5250())
div = PLL_DIV_65536;
else
return 0;
fout = (m + k / div) * (freq / (p * (1 << s)));
} else {
/* FOUT = MDIV * FIN / (PDIV * 2^SDIV) */
fout = m * (freq / (p * (1 << s)));
/*
* Exynos4210
* FOUT = MDIV * FIN / (PDIV * 2^SDIV)
*
* Exynos4412 / Exynos5250
* FOUT = MDIV * FIN / (PDIV * 2^(SDIV-1))
*/
if (proid_is_exynos4210())
fout = m * (freq / (p * (1 << s)));
else
fout = m * (freq / (p * (1 << (s - 1))));
}
return fout;

View File

@ -0,0 +1,95 @@
/*
* Clock Initialization for board based on EXYNOS4210
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <version.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/arch/clock.h>
#include "common_setup.h"
#include "exynos4_setup.h"
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
void system_clock_init(void)
{
struct exynos4_clock *clk =
(struct exynos4_clock *)samsung_get_base_clock();
writel(CLK_SRC_CPU_VAL, &clk->src_cpu);
sdelay(0x10000);
writel(CLK_SRC_TOP0_VAL, &clk->src_top0);
writel(CLK_SRC_TOP1_VAL, &clk->src_top1);
writel(CLK_SRC_DMC_VAL, &clk->src_dmc);
writel(CLK_SRC_LEFTBUS_VAL, &clk->src_leftbus);
writel(CLK_SRC_RIGHTBUS_VAL, &clk->src_rightbus);
writel(CLK_SRC_FSYS_VAL, &clk->src_fsys);
writel(CLK_SRC_PERIL0_VAL, &clk->src_peril0);
writel(CLK_SRC_CAM_VAL, &clk->src_cam);
writel(CLK_SRC_MFC_VAL, &clk->src_mfc);
writel(CLK_SRC_G3D_VAL, &clk->src_g3d);
writel(CLK_SRC_LCD0_VAL, &clk->src_lcd0);
sdelay(0x10000);
writel(CLK_DIV_CPU0_VAL, &clk->div_cpu0);
writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1);
writel(CLK_DIV_DMC0_VAL, &clk->div_dmc0);
writel(CLK_DIV_DMC1_VAL, &clk->div_dmc1);
writel(CLK_DIV_LEFTBUS_VAL, &clk->div_leftbus);
writel(CLK_DIV_RIGHTBUS_VAL, &clk->div_rightbus);
writel(CLK_DIV_TOP_VAL, &clk->div_top);
writel(CLK_DIV_FSYS1_VAL, &clk->div_fsys1);
writel(CLK_DIV_FSYS2_VAL, &clk->div_fsys2);
writel(CLK_DIV_FSYS3_VAL, &clk->div_fsys3);
writel(CLK_DIV_PERIL0_VAL, &clk->div_peril0);
writel(CLK_DIV_CAM_VAL, &clk->div_cam);
writel(CLK_DIV_MFC_VAL, &clk->div_mfc);
writel(CLK_DIV_G3D_VAL, &clk->div_g3d);
writel(CLK_DIV_LCD0_VAL, &clk->div_lcd0);
/* Set PLL locktime */
writel(PLL_LOCKTIME, &clk->apll_lock);
writel(PLL_LOCKTIME, &clk->mpll_lock);
writel(PLL_LOCKTIME, &clk->epll_lock);
writel(PLL_LOCKTIME, &clk->vpll_lock);
writel(APLL_CON1_VAL, &clk->apll_con1);
writel(APLL_CON0_VAL, &clk->apll_con0);
writel(MPLL_CON1_VAL, &clk->mpll_con1);
writel(MPLL_CON0_VAL, &clk->mpll_con0);
writel(EPLL_CON1_VAL, &clk->epll_con1);
writel(EPLL_CON0_VAL, &clk->epll_con0);
writel(VPLL_CON1_VAL, &clk->vpll_con1);
writel(VPLL_CON0_VAL, &clk->vpll_con0);
sdelay(0x30000);
}

View File

@ -31,7 +31,8 @@
#include <asm/arch/dwmmc.h>
#include "clock_init.h"
#include "setup.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#define FSYS1_MMC0_DIV_MASK 0xff0f
#define FSYS1_MMC0_DIV_VAL 0x0701
@ -214,10 +215,10 @@ struct mem_timings mem_timings[] = {
DMC_MEMCONTROL_BL_8 |
DMC_MEMCONTROL_PZQ_DISABLE |
DMC_MEMCONTROL_MRR_BYTE_7_0,
.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGx_CHIP_COL_10 |
DMC_MEMCONFIGx_CHIP_ROW_15 |
DMC_MEMCONFIGx_CHIP_BANK_8,
.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGX_CHIP_COL_10 |
DMC_MEMCONFIGX_CHIP_ROW_15 |
DMC_MEMCONFIGX_CHIP_BANK_8,
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
.prechconfig_tp_cnt = 0xff,
@ -317,10 +318,10 @@ struct mem_timings mem_timings[] = {
DMC_MEMCONTROL_BL_8 |
DMC_MEMCONTROL_PZQ_DISABLE |
DMC_MEMCONTROL_MRR_BYTE_7_0,
.memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGx_CHIP_COL_10 |
DMC_MEMCONFIGx_CHIP_ROW_15 |
DMC_MEMCONFIGx_CHIP_BANK_8,
.memconfig = DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED |
DMC_MEMCONFIGX_CHIP_COL_10 |
DMC_MEMCONFIGX_CHIP_ROW_15 |
DMC_MEMCONFIGX_CHIP_BANK_8,
.membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40),
.membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80),
.prechconfig_tp_cnt = 0xff,
@ -350,9 +351,8 @@ struct mem_timings mem_timings[] = {
* @param frequency_mhz Returns memory speed in MHz
* @param arm_freq Returns ARM clock speed in MHz
* @param mem_manuf Return Memory Manufacturer name
* @return 0 if all ok
*/
static int clock_get_mem_selection(enum ddr_mode *mem_type,
static void clock_get_mem_selection(enum ddr_mode *mem_type,
unsigned *frequency_mhz, unsigned *arm_freq,
enum mem_manuf *mem_manuf)
{
@ -363,8 +363,6 @@ static int clock_get_mem_selection(enum ddr_mode *mem_type,
*frequency_mhz = params->frequency_mhz;
*arm_freq = params->arm_freq_mhz;
*mem_manuf = params->mem_manuf;
return 0;
}
/* Get the ratios for setting ARM clock */
@ -376,9 +374,9 @@ struct arm_clk_ratios *get_arm_ratios(void)
unsigned frequency_mhz, arm_freq;
int i;
if (clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf))
;
clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf);
for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios);
i++, arm_ratio++) {
if (arm_ratio->arm_freq_mhz == arm_freq)
@ -400,15 +398,14 @@ struct mem_timings *clock_get_mem_timings(void)
unsigned frequency_mhz, arm_freq;
int i;
if (!clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf)) {
for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
i++, mem++) {
if (mem->mem_type == mem_type &&
mem->frequency_mhz == frequency_mhz &&
mem->mem_manuf == mem_manuf)
return mem;
}
clock_get_mem_selection(&mem_type, &frequency_mhz,
&arm_freq, &mem_manuf);
for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings);
i++, mem++) {
if (mem->mem_type == mem_type &&
mem->frequency_mhz == frequency_mhz &&
mem->mem_manuf == mem_manuf)
return mem;
}
/* will hang if failed to find memory timings */
@ -420,7 +417,8 @@ struct mem_timings *clock_get_mem_timings(void)
void system_clock_init()
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
struct mem_timings *mem;
struct arm_clk_ratios *arm_clk_ratio;
u32 val, tmp;
@ -660,7 +658,8 @@ void system_clock_init()
void clock_init_dp_clock(void)
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
/* DP clock enable */
setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW);
@ -675,7 +674,8 @@ void clock_init_dp_clock(void)
*/
void emmc_boot_clk_div_set(void)
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
unsigned int div_mmc;
div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK;

View File

@ -0,0 +1,45 @@
/*
* Common APIs for EXYNOS based board
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#define DMC_OFFSET 0x10000
/*
* Memory initialization
*
* @param reset Reset PHY during initialization.
*/
void mem_ctrl_init(int reset);
/* System Clock initialization */
void system_clock_init(void);
/*
* Init subsystems according to the reset status
*
* @return 0 for a normal boot, non-zero for a resume
*/
int do_lowlevel_init(void);
void sdelay(unsigned long);

View File

@ -26,7 +26,8 @@
#include <asm/arch/spl.h>
#include "clock_init.h"
#include "setup.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#define ZQ_INIT_TIMEOUT 10000
@ -175,7 +176,7 @@ void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc)
writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1);
}
void mem_ctrl_init()
void mem_ctrl_init(int reset)
{
struct spl_machine_param *param = spl_get_machine_params();
struct mem_timings *mem;
@ -185,7 +186,7 @@ void mem_ctrl_init()
/* If there are any other memory variant, add their init call below */
if (param->mem_type == DDR_MODE_DDR3) {
ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size);
ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size, reset);
if (ret) {
/* will hang if failed to init memory control */
while (1)

View File

@ -27,31 +27,36 @@
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dmc.h>
#include "setup.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#include "clock_init.h"
#define RDLVL_COMPLETE_TIMEOUT 10000
static void reset_phy_ctrl(void)
{
struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE;
struct exynos5_clock *clk =
(struct exynos5_clock *)samsung_get_base_clock();
writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl);
writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl);
}
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
int reset)
{
unsigned int val;
struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl;
struct exynos5_dmc *dmc;
int i;
phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE;
phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE;
dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE;
phy0_ctrl = (struct exynos5_phy_control *)samsung_get_base_dmc_phy();
phy1_ctrl = (struct exynos5_phy_control *)(samsung_get_base_dmc_phy()
+ DMC_OFFSET);
dmc = (struct exynos5_dmc *)samsung_get_base_dmc_ctrl();
reset_phy_ctrl();
if (reset)
reset_phy_ctrl();
/* Set Impedance Output Driver */
val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) |
@ -100,14 +105,14 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
/* Start DLL locking */
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
&phy0_ctrl->phy_con12);
&phy0_ctrl->phy_con12);
writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT),
&phy1_ctrl->phy_con12);
&phy1_ctrl->phy_con12);
update_reset_dll(dmc, DDR_MODE_DDR3);
writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT),
&dmc->concontrol);
&dmc->concontrol);
/* Memory Channel Inteleaving Size */
writel(mem->iv_size, &dmc->ivcontrol);
@ -119,7 +124,7 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size)
/* Precharge Configuration */
writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT,
&dmc->prechconfig);
&dmc->prechconfig);
/* Power Down mode Configuration */
writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT |

View File

@ -0,0 +1,213 @@
/*
* Memory setup for board based on EXYNOS4210
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <asm/arch/dmc.h>
#include "common_setup.h"
#include "exynos4_setup.h"
struct mem_timings mem = {
.direct_cmd_msr = {
DIRECT_CMD1, DIRECT_CMD2, DIRECT_CMD3, DIRECT_CMD4
},
.timingref = TIMINGREF_VAL,
.timingrow = TIMINGROW_VAL,
.timingdata = TIMINGDATA_VAL,
.timingpower = TIMINGPOWER_VAL,
.zqcontrol = ZQ_CONTROL_VAL,
.control0 = CONTROL0_VAL,
.control1 = CONTROL1_VAL,
.control2 = CONTROL2_VAL,
.concontrol = CONCONTROL_VAL,
.prechconfig = PRECHCONFIG,
.memcontrol = MEMCONTROL_VAL,
.memconfig0 = MEMCONFIG0_VAL,
.memconfig1 = MEMCONFIG1_VAL,
.dll_resync = FORCE_DLL_RESYNC,
.dll_on = DLL_CONTROL_ON,
};
static void phy_control_reset(int ctrl_no, struct exynos4_dmc *dmc)
{
if (ctrl_no) {
writel((mem.control1 | (1 << mem.dll_resync)),
&dmc->phycontrol1);
writel((mem.control1 | (0 << mem.dll_resync)),
&dmc->phycontrol1);
} else {
writel((mem.control0 | (0 << mem.dll_on)),
&dmc->phycontrol0);
writel((mem.control0 | (1 << mem.dll_on)),
&dmc->phycontrol0);
}
}
static void dmc_config_mrs(struct exynos4_dmc *dmc, int chip)
{
int i;
unsigned long mask = 0;
if (chip)
mask = DIRECT_CMD_CHIP1_SHIFT;
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
writel(mem.direct_cmd_msr[i] | mask,
&dmc->directcmd);
}
}
static void dmc_init(struct exynos4_dmc *dmc)
{
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
writel(mem.control1, &dmc->phycontrol1);
/*
* ZQ Calibration
* Termination: Disable
* Auto Calibration Start: Enable
*/
writel(mem.zqcontrol, &dmc->phyzqcontrol);
sdelay(0x100000);
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
phy_control_reset(1, dmc);
phy_control_reset(0, dmc);
/* Set DLL Parameters */
writel(mem.control1, &dmc->phycontrol1);
/* DLL Start */
writel((mem.control0 | CTRL_START | CTRL_DLL_ON), &dmc->phycontrol0);
writel(mem.control2, &dmc->phycontrol2);
/* Set Clock Ratio of Bus clock to Memory Clock */
writel(mem.concontrol, &dmc->concontrol);
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
writel(mem.memcontrol, &dmc->memcontrol);
writel(mem.memconfig0, &dmc->memconfig0);
writel(mem.memconfig1, &dmc->memconfig1);
/* Config Precharge Policy */
writel(mem.prechconfig, &dmc->prechconfig);
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
writel(mem.timingref, &dmc->timingref);
writel(mem.timingrow, &dmc->timingrow);
writel(mem.timingdata, &dmc->timingdata);
writel(mem.timingpower, &dmc->timingpower);
/* Chip0: NOP Command: Assert and Hold CKE to high level */
writel(DIRECT_CMD_NOP, &dmc->directcmd);
sdelay(0x100000);
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
dmc_config_mrs(dmc, 0);
sdelay(0x100000);
/* Chip0: ZQINIT */
writel(DIRECT_CMD_ZQ, &dmc->directcmd);
sdelay(0x100000);
writel((DIRECT_CMD_NOP | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
sdelay(0x100000);
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
dmc_config_mrs(dmc, 1);
sdelay(0x100000);
/* Chip1: ZQINIT */
writel((DIRECT_CMD_ZQ | DIRECT_CMD_CHIP1_SHIFT), &dmc->directcmd);
sdelay(0x100000);
phy_control_reset(1, dmc);
sdelay(0x100000);
/* turn on DREX0, DREX1 */
writel((mem.concontrol | AREF_EN), &dmc->concontrol);
}
void mem_ctrl_init(int reset)
{
struct exynos4_dmc *dmc;
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
writel(1, ASYNC_CONFIG);
#ifdef CONFIG_ORIGEN
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
/* Update MIU Configuration */
writel(APB_SFR_ARBRITATION_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_ARBRITATION_CONF_OFFSET);
#else
writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE +
APB_SFR_INTERLEAVE_CONF_OFFSET);
writel(INTERLEAVE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET);
writel(INTERLEAVE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET);
writel(INTERLEAVE_ADDR_MAP_EN, EXYNOS4_MIU_BASE +
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
#ifdef CONFIG_MIU_LINEAR
writel(SLAVE0_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET);
writel(SLAVE0_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET);
writel(SLAVE1_SINGLE_ADDR_MAP_START_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET);
writel(SLAVE1_SINGLE_ADDR_MAP_END_ADDR, EXYNOS4_MIU_BASE +
ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET);
writel(APB_SFR_SLV_ADDR_MAP_CONF_VAL, EXYNOS4_MIU_BASE +
ABP_SFR_SLV_ADDRMAP_CONF_OFFSET);
#endif
#endif
/* DREX0 */
dmc = (struct exynos4_dmc *)samsung_get_base_dmc_ctrl();
dmc_init(dmc);
dmc = (struct exynos4_dmc *)(samsung_get_base_dmc_ctrl()
+ DMC_OFFSET);
dmc_init(dmc);
}

View File

@ -1,5 +1,5 @@
/*
* Machine Specific Values for ORIGEN board based on S5PV310
* Machine Specific Values for EXYNOS4012 based board
*
* Copyright (C) 2011 Samsung Electronics
*
@ -29,98 +29,22 @@
#include <version.h>
#include <asm/arch/cpu.h>
/* Offsets of clock registers (sources and dividers) */
#define CLK_SRC_CPU_OFFSET 0x14200
#define CLK_DIV_CPU0_OFFSET 0x14500
#define CLK_DIV_CPU1_OFFSET 0x14504
#define CLK_SRC_DMC_OFFSET 0x10200
#define CLK_DIV_DMC0_OFFSET 0x10500
#define CLK_DIV_DMC1_OFFSET 0x10504
#define CLK_SRC_TOP0_OFFSET 0xC210
#define CLK_SRC_TOP1_OFFSET 0xC214
#define CLK_DIV_TOP_OFFSET 0xC510
#define CLK_SRC_LEFTBUS_OFFSET 0x4200
#define CLK_DIV_LEFTBUS_OFFSET 0x4500
#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
#define CLK_SRC_FSYS_OFFSET 0xC240
#define CLK_DIV_FSYS1_OFFSET 0xC544
#define CLK_DIV_FSYS2_OFFSET 0xC548
#define CLK_DIV_FSYS3_OFFSET 0xC54C
#define CLK_SRC_CAM_OFFSET 0xC220
#define CLK_SRC_TV_OFFSET 0xC224
#define CLK_SRC_MFC_OFFSET 0xC228
#define CLK_SRC_G3D_OFFSET 0xC22C
#define CLK_SRC_LCD0_OFFSET 0xC234
#define CLK_SRC_PERIL0_OFFSET 0xC250
#define CLK_DIV_CAM_OFFSET 0xC520
#define CLK_DIV_TV_OFFSET 0xC524
#define CLK_DIV_MFC_OFFSET 0xC528
#define CLK_DIV_G3D_OFFSET 0xC52C
#define CLK_DIV_LCD0_OFFSET 0xC534
#define CLK_DIV_PERIL0_OFFSET 0xC550
#define CLK_SRC_LCD0_OFFSET 0xC234
#define APLL_LOCK_OFFSET 0x14000
#define MPLL_LOCK_OFFSET 0x14008
#define APLL_CON0_OFFSET 0x14100
#define APLL_CON1_OFFSET 0x14104
#define MPLL_CON0_OFFSET 0x14108
#define MPLL_CON1_OFFSET 0x1410C
#define EPLL_LOCK_OFFSET 0xC010
#define VPLL_LOCK_OFFSET 0xC020
#define EPLL_CON0_OFFSET 0xC110
#define EPLL_CON1_OFFSET 0xC114
#define VPLL_CON0_OFFSET 0xC120
#define VPLL_CON1_OFFSET 0xC124
/* DMC: DRAM Controllor Register offsets */
#define DMC_CONCONTROL 0x00
#define DMC_MEMCONTROL 0x04
#define DMC_MEMCONFIG0 0x08
#define DMC_MEMCONFIG1 0x0C
#define DMC_DIRECTCMD 0x10
#define DMC_PRECHCONFIG 0x14
#define DMC_PHYCONTROL0 0x18
#define DMC_PHYCONTROL1 0x1C
#define DMC_PHYCONTROL2 0x20
#define DMC_TIMINGAREF 0x30
#define DMC_TIMINGROW 0x34
#define DMC_TIMINGDATA 0x38
#define DMC_TIMINGPOWER 0x3C
#define DMC_PHYZQCONTROL 0x44
#ifdef CONFIG_CLK_800_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_200_200
#define DRAM_CLK_200
#endif
#ifdef CONFIG_CLK_1000_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_400_200
#define DRAM_CLK_400
#endif
/* Bus Configuration Register Address */
#define ASYNC_CONFIG 0x10010350
/* MIU Config Register Offsets*/
#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
/* Offset for inform registers */
#define INFORM0_OFFSET 0x800
#define INFORM1_OFFSET 0x804
/* GPIO Offsets for UART: GPIO Contol Register */
#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00
#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20
/* UART Register offsets */
#define ULCON_OFFSET 0x00
#define UCON_OFFSET 0x04
#define UFCON_OFFSET 0x08
#define UBRDIV_OFFSET 0x28
#define UFRACVAL_OFFSET 0x2C
/* CLK_SRC_CPU */
#define MUX_HPM_SEL_MOUTAPLL 0x0
#define MUX_HPM_SEL_SCLKMPLL 0x1
@ -485,123 +409,186 @@
| (VPLL_MRR << 24) \
| (VPLL_MFR << 16) \
| (VPLL_K << 0))
/*
* UART GPIO_A0/GPIO_A1 Control Register Value
* 0x2: UART Function
*/
#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222
#define EXYNOS4_GPIO_A1_CON_VAL 0x222222
/* ULCON: UART Line Control Value 8N1 */
#define WORD_LEN_5_BIT 0x00
#define WORD_LEN_6_BIT 0x01
#define WORD_LEN_7_BIT 0x02
#define WORD_LEN_8_BIT 0x03
/* DMC */
#define DIRECT_CMD_NOP 0x07000000
#define DIRECT_CMD_ZQ 0x0a000000
#define DIRECT_CMD_CHIP1_SHIFT (1 << 20)
#define MEM_TIMINGS_MSR_COUNT 4
#define CTRL_START (1 << 0)
#define CTRL_DLL_ON (1 << 1)
#define AREF_EN (1 << 5)
#define DRV_TYPE (1 << 6)
#define STOP_BIT_1 0x00
#define STOP_BIT_2 0x01
struct mem_timings {
unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT];
unsigned timingref;
unsigned timingrow;
unsigned timingdata;
unsigned timingpower;
unsigned zqcontrol;
unsigned control0;
unsigned control1;
unsigned control2;
unsigned concontrol;
unsigned prechconfig;
unsigned memcontrol;
unsigned memconfig0;
unsigned memconfig1;
unsigned dll_resync;
unsigned dll_on;
};
#define NO_PARITY 0x00
#define ODD_PARITY 0x4
#define EVEN_PARITY 0x5
#define FORCED_PARITY_CHECK_AS_1 0x6
#define FORCED_PARITY_CHECK_AS_0 0x7
/* MIU */
/* MIU Config Register Offsets*/
#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
#define ABP_SFR_SLV_ADDRMAP_CONF_OFFSET 0x800
#define ABP_SFR_INTERLEAVE_ADDRMAP_START_OFFSET 0x808
#define ABP_SFR_INTERLEAVE_ADDRMAP_END_OFFSET 0x810
#define ABP_SFR_SLV0_SINGLE_ADDRMAP_START_OFFSET 0x818
#define ABP_SFR_SLV0_SINGLE_ADDRMAP_END_OFFSET 0x820
#define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828
#define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830
#define INFRAMODE_NORMAL 0x00
#define INFRAMODE_INFRARED 0x01
#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
| (NO_PARITY << 3) \
| (STOP_BIT_1 << 2) \
| (WORD_LEN_8_BIT << 0))
/*
* UCON: UART Control Value
* Tx_interrupt Type: Level
* Rx_interrupt Type: Level
* Rx Timeout Enabled: Yes
* Rx-Error Atatus_Int Enable: Yes
* Loop_Back: No
* Break Signal: No
* Transmit mode : Interrupt request/polling
* Receive mode : Interrupt request/polling
*/
#define TX_PULSE_INTERRUPT 0
#define TX_LEVEL_INTERRUPT 1
#define RX_PULSE_INTERRUPT 0
#define RX_LEVEL_INTERRUPT 1
#define RX_TIME_OUT ENABLE
#define RX_ERROR_STATE_INT_ENB ENABLE
#define LOOP_BACK DISABLE
#define BREAK_SIGNAL DISABLE
#define TX_MODE_DISABLED 0X00
#define TX_MODE_IRQ_OR_POLL 0X01
#define TX_MODE_DMA 0X02
#define RX_MODE_DISABLED 0X00
#define RX_MODE_IRQ_OR_POLL 0X01
#define RX_MODE_DMA 0X02
#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
| (RX_LEVEL_INTERRUPT << 8) \
| (RX_TIME_OUT << 7) \
| (RX_ERROR_STATE_INT_ENB << 6) \
| (LOOP_BACK << 5) \
| (BREAK_SIGNAL << 4) \
| (TX_MODE_IRQ_OR_POLL << 2) \
| (RX_MODE_IRQ_OR_POLL << 0))
/*
* UFCON: UART FIFO Control Value
* Tx FIFO Trigger LEVEL: 2 Bytes (001)
* Rx FIFO Trigger LEVEL: 2 Bytes (001)
* Tx Fifo Reset: No
* Rx Fifo Reset: No
* FIFO Enable: Yes
*/
#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
#define TX_FIFO_RESET DISABLE
#define RX_FIFO_RESET DISABLE
#define FIFO_ENABLE ENABLE
#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
| (RX_FIFO_TRIGGER_LEVEL << 4) \
| (TX_FIFO_RESET << 2) \
| (RX_FIFO_RESET << 1) \
| (FIFO_ENABLE << 0))
/*
* Baud Rate Division Value
* 115200 BAUD:
* UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
* UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
*/
#define UBRDIV_VAL 0x35
/*
* Fractional Part of Baud Rate Divisor:
* 115200 BAUD:
* UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
* UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
*/
#define UFRACVAL_VAL 0x4
#ifdef CONFIG_ORIGEN
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */
#define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507
#define APB_SFR_ARBRITATION_CONF_VAL 0x00000001
#endif
#define INTERLEAVE_ADDR_MAP_START_ADDR 0x40000000
#define INTERLEAVE_ADDR_MAP_END_ADDR 0xbfffffff
#define INTERLEAVE_ADDR_MAP_EN 0x00000001
#ifdef CONFIG_MIU_1BIT_INTERLEAVED
/* Interleave_bit0: 0xC*/
#define APB_SFR_INTERLEAVE_CONF_VAL 0x0000000c
#endif
#ifdef CONFIG_MIU_2BIT_INTERLEAVED
/* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0xc */
#define APB_SFR_INTERLEAVE_CONF_VAL 0x2000150c
#endif
#define SLAVE0_SINGLE_ADDR_MAP_START_ADDR 0x40000000
#define SLAVE0_SINGLE_ADDR_MAP_END_ADDR 0x7fffffff
#define SLAVE1_SINGLE_ADDR_MAP_START_ADDR 0x80000000
#define SLAVE1_SINGLE_ADDR_MAP_END_ADDR 0xbfffffff
/* Enable SME0 and SME1*/
#define APB_SFR_SLV_ADDR_MAP_CONF_VAL 0x00000006
#define FORCE_DLL_RESYNC 3
#define DLL_CONTROL_ON 1
#define DIRECT_CMD1 0x00020000
#define DIRECT_CMD2 0x00030000
#define DIRECT_CMD3 0x00010002
#define DIRECT_CMD4 0x00000328
#define CTRL_ZQ_MODE_NOTERM (0x1 << 0)
#define CTRL_ZQ_START (0x1 << 1)
#define CTRL_ZQ_DIV (0 << 4)
#define CTRL_ZQ_MODE_DDS (0x7 << 8)
#define CTRL_ZQ_MODE_TERM (0x2 << 11)
#define CTRL_ZQ_FORCE_IMPN (0x5 << 14)
#define CTRL_ZQ_FORCE_IMPP (0x6 << 17)
#define CTRL_DCC (0xE38 << 20)
#define ZQ_CONTROL_VAL (CTRL_ZQ_MODE_NOTERM | CTRL_ZQ_START\
| CTRL_ZQ_DIV | CTRL_ZQ_MODE_DDS\
| CTRL_ZQ_MODE_TERM | CTRL_ZQ_FORCE_IMPN\
| CTRL_ZQ_FORCE_IMPP | CTRL_DCC)
#define ASYNC (0 << 0)
#define CLK_RATIO (1 << 1)
#define DIV_PIPE (1 << 3)
#define AWR_ON (1 << 4)
#define AREF_DISABLE (0 << 5)
#define DRV_TYPE_DISABLE (0 << 6)
#define CHIP0_NOT_EMPTY (0 << 8)
#define CHIP1_NOT_EMPTY (0 << 9)
#define DQ_SWAP_DISABLE (0 << 10)
#define QOS_FAST_DISABLE (0 << 11)
#define RD_FETCH (0x3 << 12)
#define TIMEOUT_LEVEL0 (0xFFF << 16)
#define CONCONTROL_VAL (ASYNC | CLK_RATIO | DIV_PIPE | AWR_ON\
| AREF_DISABLE | DRV_TYPE_DISABLE\
| CHIP0_NOT_EMPTY | CHIP1_NOT_EMPTY\
| DQ_SWAP_DISABLE | QOS_FAST_DISABLE\
| RD_FETCH | TIMEOUT_LEVEL0)
#define CLK_STOP_DISABLE (0 << 1)
#define DPWRDN_DISABLE (0 << 2)
#define DPWRDN_TYPE (0 << 3)
#define TP_DISABLE (0 << 4)
#define DSREF_DIABLE (0 << 5)
#define ADD_LAT_PALL (1 << 6)
#define MEM_TYPE_DDR3 (0x6 << 8)
#define MEM_WIDTH_32 (0x2 << 12)
#define NUM_CHIP_2 (1 << 16)
#define BL_8 (0x3 << 20)
#define MEMCONTROL_VAL (CLK_STOP_DISABLE | DPWRDN_DISABLE\
| DPWRDN_TYPE | TP_DISABLE | DSREF_DIABLE\
| ADD_LAT_PALL | MEM_TYPE_DDR3 | MEM_WIDTH_32\
| NUM_CHIP_2 | BL_8)
#define CHIP_BANK_8 (0x3 << 0)
#define CHIP_ROW_14 (0x2 << 4)
#define CHIP_COL_10 (0x3 << 8)
#define CHIP_MAP_INTERLEAVED (1 << 12)
#define CHIP_MASK (0xe0 << 16)
#ifdef CONFIG_MIU_LINEAR
#define CHIP0_BASE (0x40 << 24)
#define CHIP1_BASE (0x60 << 24)
#else
#define CHIP0_BASE (0x20 << 24)
#define CHIP1_BASE (0x40 << 24)
#endif
#define MEMCONFIG0_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
| CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP0_BASE)
#define MEMCONFIG1_VAL (CHIP_BANK_8 | CHIP_ROW_14 | CHIP_COL_10\
| CHIP_MAP_INTERLEAVED | CHIP_MASK | CHIP1_BASE)
#define TP_CNT (0xff << 24)
#define PRECHCONFIG TP_CNT
#define CTRL_OFF (0 << 0)
#define CTRL_DLL_OFF (0 << 1)
#define CTRL_HALF (0 << 2)
#define CTRL_DFDQS (1 << 3)
#define DQS_DELAY (0 << 4)
#define CTRL_START_POINT (0x10 << 8)
#define CTRL_INC (0x10 << 16)
#define CTRL_FORCE (0x71 << 24)
#define CONTROL0_VAL (CTRL_OFF | CTRL_DLL_OFF | CTRL_HALF\
| CTRL_DFDQS | DQS_DELAY | CTRL_START_POINT\
| CTRL_INC | CTRL_FORCE)
#define CTRL_SHIFTC (0x6 << 0)
#define CTRL_REF (8 << 4)
#define CTRL_SHGATE (1 << 29)
#define TERM_READ_EN (1 << 30)
#define TERM_WRITE_EN (1 << 31)
#define CONTROL1_VAL (CTRL_SHIFTC | CTRL_REF | CTRL_SHGATE\
| TERM_READ_EN | TERM_WRITE_EN)
#define CONTROL2_VAL 0x00000000
#ifdef CONFIG_ORIGEN
#define TIMINGREF_VAL 0x000000BB
#define TIMINGROW_VAL 0x4046654f
#define TIMINGDATA_VAL 0x46400506
#define TIMINGPOWER_VAL 0x52000A3C
#else
#define TIMINGREF_VAL 0x000000BC
#ifdef DRAM_CLK_330
#define TIMINGROW_VAL 0x3545548d
#define TIMINGDATA_VAL 0x45430506
#define TIMINGPOWER_VAL 0x4439033c
#endif
#ifdef DRAM_CLK_400
#define TIMINGROW_VAL 0x45430506
#define TIMINGDATA_VAL 0x56500506
#define TIMINGPOWER_VAL 0x5444033d
#endif
#endif
#endif

View File

@ -93,17 +93,17 @@
#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25)
/* MEMCONFIG0 register bit fields */
#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12)
#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8)
#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4)
#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4)
#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0)
#define DMC_MEMCONFIGX_CHIP_MAP_INTERLEAVED (1 << 12)
#define DMC_MEMCONFIGX_CHIP_COL_10 (3 << 8)
#define DMC_MEMCONFIGX_CHIP_ROW_14 (2 << 4)
#define DMC_MEMCONFIGX_CHIP_ROW_15 (3 << 4)
#define DMC_MEMCONFIGX_CHIP_BANK_8 (3 << 0)
#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16)
#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0)
#define DMC_MEMBASECONFIGX_CHIP_BASE(x) (x << 16)
#define DMC_MEMBASECONFIGX_CHIP_MASK(x) (x << 0)
#define DMC_MEMBASECONFIG_VAL(x) ( \
DMC_MEMBASECONFIGx_CHIP_BASE(x) | \
DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \
DMC_MEMBASECONFIGX_CHIP_BASE(x) | \
DMC_MEMBASECONFIGX_CHIP_MASK(0x780) \
)
#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40)
@ -513,9 +513,11 @@ enum {
* which the DMC uses to decide how to split a memory
* chunk into smaller chunks to support concurrent
* accesses; may vary across boards.
* @param reset Reset DDR PHY during initialization.
* @return 0 if ok, SETUP_ERR_... if there is a problem
*/
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size);
int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size,
int reset);
/*
* Configure ZQ I/O interface
@ -562,8 +564,4 @@ void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc);
* @param ddr_mode Type of DDR memory
*/
void update_reset_dll(struct exynos5_dmc *, enum ddr_mode);
void sdelay(unsigned long);
void mem_ctrl_init(void);
void system_clock_init(void);
#endif

View File

@ -0,0 +1,73 @@
/*
* Lowlevel setup for EXYNOS5 based board
*
* Copyright (C) 2013 Samsung Electronics
* Rajeshwari Shinde <rajeshwari.s@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <asm/arch/cpu.h>
#include <asm/arch/dmc.h>
#include <asm/arch/power.h>
#include <asm/arch/tzpc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
#include "common_setup.h"
/* These are the things we can do during low-level init */
enum {
DO_WAKEUP = 1 << 0,
DO_CLOCKS = 1 << 1,
DO_MEM_RESET = 1 << 2,
DO_UART = 1 << 3,
};
int do_lowlevel_init(void)
{
uint32_t reset_status;
int actions = 0;
arch_cpu_init();
reset_status = get_reset_status();
switch (reset_status) {
case S5P_CHECK_SLEEP:
actions = DO_CLOCKS | DO_WAKEUP;
break;
case S5P_CHECK_DIDLE:
case S5P_CHECK_LPA:
actions = DO_WAKEUP;
break;
default:
/* This is a normal boot (not a wake from sleep) */
actions = DO_CLOCKS | DO_MEM_RESET;
}
if (actions & DO_CLOCKS) {
system_clock_init();
mem_ctrl_init(actions & DO_MEM_RESET);
tzpc_init();
}
return actions & DO_WAKEUP;
}

View File

@ -408,9 +408,49 @@ static int exynos4_mmc_config(int peripheral, int flags)
return 0;
}
static void exynos4_uart_config(int peripheral)
{
struct exynos4_gpio_part1 *gpio1 =
(struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
struct s5p_gpio_bank *bank;
int i, start, count;
switch (peripheral) {
case PERIPH_ID_UART0:
bank = &gpio1->a0;
start = 0;
count = 4;
break;
case PERIPH_ID_UART1:
bank = &gpio1->a0;
start = 4;
count = 4;
break;
case PERIPH_ID_UART2:
bank = &gpio1->a1;
start = 0;
count = 4;
break;
case PERIPH_ID_UART3:
bank = &gpio1->a1;
start = 4;
count = 2;
break;
}
for (i = start; i < start + count; i++) {
s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
}
}
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
case PERIPH_ID_UART0:
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
case PERIPH_ID_UART3:
exynos4_uart_config(peripheral);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
case PERIPH_ID_I2C2:

View File

@ -140,3 +140,53 @@ void set_hw_thermal_trip(void)
setbits_le32(&power->ps_hold_control, POWER_ENABLE_HW_TRIP);
}
}
static uint32_t exynos5_get_reset_status(void)
{
struct exynos5_power *power =
(struct exynos5_power *)samsung_get_base_power();
return power->inform1;
}
static uint32_t exynos4_get_reset_status(void)
{
struct exynos4_power *power =
(struct exynos4_power *)samsung_get_base_power();
return power->inform1;
}
uint32_t get_reset_status(void)
{
if (cpu_is_exynos5())
return exynos5_get_reset_status();
else
return exynos4_get_reset_status();
}
static void exynos5_power_exit_wakeup(void)
{
struct exynos5_power *power =
(struct exynos5_power *)samsung_get_base_power();
typedef void (*resume_func)(void);
((resume_func)power->inform0)();
}
static void exynos4_power_exit_wakeup(void)
{
struct exynos4_power *power =
(struct exynos4_power *)samsung_get_base_power();
typedef void (*resume_func)(void);
((resume_func)power->inform0)();
}
void power_exit_wakeup(void)
{
if (cpu_is_exynos5())
exynos5_power_exit_wakeup();
else
exynos4_power_exit_wakeup();
}

View File

@ -23,12 +23,18 @@
#include<common.h>
#include<config.h>
#include <asm/arch-exynos/dmc.h>
#include <asm/arch/clock.h>
#include <asm/arch/clk.h>
#include <asm/arch/dmc.h>
#include <asm/arch/power.h>
#include <asm/arch/spl.h>
#include "common_setup.h"
#include "clock_init.h"
DECLARE_GLOBAL_DATA_PTR;
#define OM_STAT (0x1f << 1)
/* Index into irom ptr table */
enum index {
MMC_INDEX,
@ -48,20 +54,12 @@ u32 irom_ptr_table[] = {
[USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/
};
enum boot_mode {
BOOT_MODE_MMC = 4,
BOOT_MODE_SERIAL = 20,
BOOT_MODE_EMMC = 8, /* EMMC4.4 */
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,
BOOT_MODE_USB, /* Boot using USB download */
};
void *get_irom_func(int index)
{
return (void *)*(u32 *)irom_ptr_table[index];
}
#ifdef CONFIG_USB_BOOTING
/*
* Set/clear program flow prediction and return the previous state.
*/
@ -75,6 +73,7 @@ static int config_branch_prediction(int set_cr_z)
return cr & CR_Z;
}
#endif
/*
* Copy U-boot from mmc to RAM:
@ -83,35 +82,42 @@ static int config_branch_prediction(int set_cr_z)
*/
void copy_uboot_to_ram(void)
{
int is_cr_z_set;
unsigned int sec_boot_check;
enum boot_mode bootmode = BOOT_MODE_OM;
u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst);
u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst);
u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst) = NULL;
u32 offset = 0, size = 0;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst);
void (*end_bootop_from_emmc)(void);
#endif
#ifdef CONFIG_USB_BOOTING
u32 (*usb_copy)(void);
int is_cr_z_set;
unsigned int sec_boot_check;
/* Read iRAM location to check for secondary USB boot mode */
sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
bootmode = BOOT_MODE_USB;
#endif
if (bootmode == BOOT_MODE_OM)
bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT;
bootmode = readl(samsung_get_base_power()) & OM_STAT;
switch (bootmode) {
#ifdef CONFIG_SPI_BOOTING
case BOOT_MODE_SERIAL:
spi_copy = get_irom_func(SPI_INDEX);
spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE,
CONFIG_SYS_TEXT_BASE);
offset = SPI_FLASH_UBOOT_POS;
size = CONFIG_BL2_SIZE;
copy_bl2 = get_irom_func(SPI_INDEX);
break;
#endif
case BOOT_MODE_MMC:
offset = BL2_START_OFFSET;
size = BL2_SIZE_BLOC_COUNT;
copy_bl2 = get_irom_func(MMC_INDEX);
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT,
CONFIG_SYS_TEXT_BASE);
break;
#ifdef CONFIG_SUPPORT_EMMC_BOOT
case BOOT_MODE_EMMC:
/* Set the FSYS1 clock divisor value for EMMC boot */
emmc_boot_clk_div_set();
@ -122,6 +128,8 @@ void copy_uboot_to_ram(void)
copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
end_bootop_from_emmc();
break;
#endif
#ifdef CONFIG_USB_BOOTING
case BOOT_MODE_USB:
/*
* iROM needs program flow prediction to be disabled
@ -132,14 +140,50 @@ void copy_uboot_to_ram(void)
usb_copy();
config_branch_prediction(is_cr_z_set);
break;
#endif
default:
break;
}
if (copy_bl2)
copy_bl2(offset, size, CONFIG_SYS_TEXT_BASE);
}
void memzero(void *s, size_t n)
{
char *ptr = s;
size_t i;
for (i = 0; i < n; i++)
*ptr++ = '\0';
}
/**
* Set up the U-Boot global_data pointer
*
* This sets the address of the global data, and sets up basic values.
*
* @param gdp Value to give to gd
*/
static void setup_global_data(gd_t *gdp)
{
gd = gdp;
memzero((void *)gd, sizeof(gd_t));
gd->flags |= GD_FLG_RELOC;
gd->baudrate = CONFIG_BAUDRATE;
gd->have_console = 1;
}
void board_init_f(unsigned long bootflag)
{
__aligned(8) gd_t local_gd;
__attribute__((noreturn)) void (*uboot)(void);
setup_global_data(&local_gd);
if (do_lowlevel_init())
power_exit_wakeup();
copy_uboot_to_ram();
/* Jump to U-Boot image */

View File

@ -202,4 +202,31 @@
interrupts = <0 78 0>;
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
id = <0>;
};
serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 52 0>;
id = <1>;
};
serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 53 0>;
id = <2>;
};
serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <0 54 0>;
id = <3>;
};
};

View File

@ -40,8 +40,7 @@
#define EXYNOS4_WATCHDOG_BASE 0x10060000
#define EXYNOS4_TZPC_BASE 0x10110000
#define EXYNOS4_MIU_BASE 0x10600000
#define EXYNOS4_DMC0_BASE 0x10400000
#define EXYNOS4_DMC1_BASE 0x10410000
#define EXYNOS4_DMC_CTRL_BASE 0x10400000
#define EXYNOS4_GPIO_PART2_BASE 0x11000000
#define EXYNOS4_GPIO_PART1_BASE 0x11400000
#define EXYNOS4_FIMD_BASE 0x11C00000
@ -64,6 +63,7 @@
#define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS4X12 */
#define EXYNOS4X12_GPIO_PART3_BASE 0x03860000
@ -76,8 +76,7 @@
#define EXYNOS4X12_SYSTIMER_BASE 0x10050000
#define EXYNOS4X12_WATCHDOG_BASE 0x10060000
#define EXYNOS4X12_TZPC_BASE 0x10110000
#define EXYNOS4X12_DMC0_BASE 0x10600000
#define EXYNOS4X12_DMC1_BASE 0x10610000
#define EXYNOS4X12_DMC_CTRL_BASE 0x10600000
#define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000
#define EXYNOS4X12_GPIO_PART2_BASE 0x11000000
#define EXYNOS4X12_GPIO_PART1_BASE 0x11400000
@ -99,6 +98,7 @@
#define EXYNOS4X12_SPI_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_SPI_ISP_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_ACE_SFR_BASE DEVICE_NOT_AVAILABLE
#define EXYNOS4X12_DMC_PHY_BASE DEVICE_NOT_AVAILABLE
/* EXYNOS5 Common*/
#define EXYNOS5_I2C_SPACING 0x10000
@ -112,8 +112,7 @@
#define EXYNOS5_TZPC_BASE 0x10100000
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
#define EXYNOS5_DMC_PHY0_BASE 0x10C00000
#define EXYNOS5_DMC_PHY1_BASE 0x10C10000
#define EXYNOS5_DMC_PHY_BASE 0x10C00000
#define EXYNOS5_GPIO_PART3_BASE 0x10D10000
#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000
#define EXYNOS5_GPIO_PART1_BASE 0x11400000
@ -237,6 +236,8 @@ SAMSUNG_BASE(power, POWER_BASE)
SAMSUNG_BASE(spi, SPI_BASE)
SAMSUNG_BASE(spi_isp, SPI_ISP_BASE)
SAMSUNG_BASE(tzpc, TZPC_BASE)
SAMSUNG_BASE(dmc_ctrl, DMC_CTRL_BASE)
SAMSUNG_BASE(dmc_phy, DMC_PHY_BASE)
#endif
#endif /* _EXYNOS4_CPU_H */

View File

@ -888,4 +888,16 @@ void set_ps_hold_ctrl(void);
* source as XXTI
*/
void set_xclkout(void);
/*
* Read inform1 to get the reset status.
* @return: the value can be either S5P_CHECK_SLEEP or
* S5P_CHECK_DIDLE or S5P_CHECK_LPA as stored in inform1
* if none of these then its normal booting.
*/
uint32_t get_reset_status(void);
/* Read the resume function and call it */
void power_exit_wakeup(void);
#endif

View File

@ -32,6 +32,7 @@ enum boot_mode {
* pin values are the same across Exynos4 and Exynos5.
*/
BOOT_MODE_MMC = 4,
BOOT_MODE_EMMC = 8, /* EMMC4.4 */
BOOT_MODE_SERIAL = 20,
/* Boot based on Operating Mode pin settings */
BOOT_MODE_OM = 32,

View File

@ -34,6 +34,8 @@
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
};
sromc@12250000 {

View File

@ -30,6 +30,12 @@
spi2 = "/spi@12d40000";
spi3 = "/spi@131a0000";
spi4 = "/spi@131b0000";
mmc0 = "/mmc@12200000";
mmc1 = "/mmc@12210000";
mmc2 = "/mmc@12220000";
mmc3 = "/mmc@12230000";
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
};
sound@12d60000 {
@ -56,6 +62,26 @@
};
};
mmc@12200000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
samsung,removable = <0>;
};
mmc@12210000 {
status = "disabled";
};
mmc@12220000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
samsung,removable = <1>;
};
mmc@12230000 {
status = "disabled";
};
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;

View File

@ -24,19 +24,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
SOBJS := mem_setup.o
SOBJS += lowlevel_init.o
ifndef CONFIG_SPL_BUILD
COBJS += origen.o
endif
ifdef CONFIG_SPL_BUILD
COBJS += mmc_boot.o
endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
ALL +=$(obj).depend $(LIB)

View File

@ -1,357 +0,0 @@
/*
* Lowlevel setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
#include "origen_setup.h"
/*
* Register usages:
*
* r5 has zero always
* r7 has GPIO part1 base 0x11400000
* r6 has GPIO part2 base 0x11000000
*/
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
push {lr}
/* r5 has always zero */
mov r5, #0
ldr r7, =EXYNOS4_GPIO_PART1_BASE
ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET)
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* LPA wakeup reset */
ldr r2, =S5P_CHECK_LPA
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*
* If U-boot is already running in ram, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_asm_init
1:
/* for UART */
bl uart_asm_init
bl arch_cpu_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
bl arch_cpu_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET)
/* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
push {lr}
ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =CLK_SRC_CPU_VAL
ldr r2, =CLK_SRC_CPU_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
2: subs r1, r1, #1
bne 2b
ldr r1, =CLK_SRC_TOP0_VAL
ldr r2, =CLK_SRC_TOP0_OFFSET
str r1, [r0, r2]
ldr r1, =CLK_SRC_TOP1_VAL
ldr r2, =CLK_SRC_TOP1_OFFSET
str r1, [r0, r2]
/* DMC */
ldr r1, =CLK_SRC_DMC_VAL
ldr r2, =CLK_SRC_DMC_OFFSET
str r1, [r0, r2]
/*CLK_SRC_LEFTBUS */
ldr r1, =CLK_SRC_LEFTBUS_VAL
ldr r2, =CLK_SRC_LEFTBUS_OFFSET
str r1, [r0, r2]
/*CLK_SRC_RIGHTBUS */
ldr r1, =CLK_SRC_RIGHTBUS_VAL
ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
ldr r1, =CLK_SRC_FSYS_VAL
ldr r2, =CLK_SRC_FSYS_OFFSET
str r1, [r0, r2]
/* UART[0:4] */
ldr r1, =CLK_SRC_PERIL0_VAL
ldr r2, =CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
/* CAM , FIMC 0-3 */
ldr r1, =CLK_SRC_CAM_VAL
ldr r2, =CLK_SRC_CAM_OFFSET
str r1, [r0, r2]
/* MFC */
ldr r1, =CLK_SRC_MFC_VAL
ldr r2, =CLK_SRC_MFC_OFFSET
str r1, [r0, r2]
/* G3D */
ldr r1, =CLK_SRC_G3D_VAL
ldr r2, =CLK_SRC_G3D_OFFSET
str r1, [r0, r2]
/* LCD0 */
ldr r1, =CLK_SRC_LCD0_VAL
ldr r2, =CLK_SRC_LCD0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
3: subs r1, r1, #1
bne 3b
/* CLK_DIV_CPU0 */
ldr r1, =CLK_DIV_CPU0_VAL
ldr r2, =CLK_DIV_CPU0_OFFSET
str r1, [r0, r2]
/* CLK_DIV_CPU1 */
ldr r1, =CLK_DIV_CPU1_VAL
ldr r2, =CLK_DIV_CPU1_OFFSET
str r1, [r0, r2]
/* CLK_DIV_DMC0 */
ldr r1, =CLK_DIV_DMC0_VAL
ldr r2, =CLK_DIV_DMC0_OFFSET
str r1, [r0, r2]
/*CLK_DIV_DMC1 */
ldr r1, =CLK_DIV_DMC1_VAL
ldr r2, =CLK_DIV_DMC1_OFFSET
str r1, [r0, r2]
/* CLK_DIV_LEFTBUS */
ldr r1, =CLK_DIV_LEFTBUS_VAL
ldr r2, =CLK_DIV_LEFTBUS_OFFSET
str r1, [r0, r2]
/* CLK_DIV_RIGHTBUS */
ldr r1, =CLK_DIV_RIGHTBUS_VAL
ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* CLK_DIV_TOP */
ldr r1, =CLK_DIV_TOP_VAL
ldr r2, =CLK_DIV_TOP_OFFSET
str r1, [r0, r2]
/* MMC[0:1] */
ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS1_OFFSET
str r1, [r0, r2]
/* MMC[2:3] */
ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS2_OFFSET
str r1, [r0, r2]
/* MMC4 */
ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
ldr r2, =CLK_DIV_FSYS3_OFFSET
str r1, [r0, r2]
/* CLK_DIV_PERIL0: UART Clock Divisors */
ldr r1, =CLK_DIV_PERIL0_VAL
ldr r2, =CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
/* CAM, FIMC 0-3: CAM Clock Divisors */
ldr r1, =CLK_DIV_CAM_VAL
ldr r2, =CLK_DIV_CAM_OFFSET
str r1, [r0, r2]
/* CLK_DIV_MFC: MFC Clock Divisors */
ldr r1, =CLK_DIV_MFC_VAL
ldr r2, =CLK_DIV_MFC_OFFSET
str r1, [r0, r2]
/* CLK_DIV_G3D: G3D Clock Divisors */
ldr r1, =CLK_DIV_G3D_VAL
ldr r2, =CLK_DIV_G3D_OFFSET
str r1, [r0, r2]
/* CLK_DIV_LCD0: LCD0 Clock Divisors */
ldr r1, =CLK_DIV_LCD0_VAL
ldr r2, =CLK_DIV_LCD0_OFFSET
str r1, [r0, r2]
/* Set PLL locktime */
ldr r1, =PLL_LOCKTIME
ldr r2, =APLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =MPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =EPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =PLL_LOCKTIME
ldr r2, =VPLL_LOCK_OFFSET
str r1, [r0, r2]
/* APLL_CON1 */
ldr r1, =APLL_CON1_VAL
ldr r2, =APLL_CON1_OFFSET
str r1, [r0, r2]
/* APLL_CON0 */
ldr r1, =APLL_CON0_VAL
ldr r2, =APLL_CON0_OFFSET
str r1, [r0, r2]
/* MPLL_CON1 */
ldr r1, =MPLL_CON1_VAL
ldr r2, =MPLL_CON1_OFFSET
str r1, [r0, r2]
/* MPLL_CON0 */
ldr r1, =MPLL_CON0_VAL
ldr r2, =MPLL_CON0_OFFSET
str r1, [r0, r2]
/* EPLL */
ldr r1, =EPLL_CON1_VAL
ldr r2, =EPLL_CON1_OFFSET
str r1, [r0, r2]
/* EPLL_CON0 */
ldr r1, =EPLL_CON0_VAL
ldr r2, =EPLL_CON0_OFFSET
str r1, [r0, r2]
/* VPLL_CON1 */
ldr r1, =VPLL_CON1_VAL
ldr r2, =VPLL_CON1_OFFSET
str r1, [r0, r2]
/* VPLL_CON0 */
ldr r1, =VPLL_CON0_VAL
ldr r2, =VPLL_CON0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x30000
4: subs r1, r1, #1
bne 4b
pop {pc}
/*
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
* void uart_asm_init(void)
*/
.globl uart_asm_init
uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =EXYNOS4_GPIO_A0_CON_VAL
str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET]
ldr r1, =EXYNOS4_GPIO_A1_CON_VAL
str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET]
ldr r0, =EXYNOS4_UART_BASE
add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =ULCON_VAL
str r1, [r0, #ULCON_OFFSET]
ldr r1, =UCON_VAL
str r1, [r0, #UCON_OFFSET]
ldr r1, =UFCON_VAL
str r1, [r0, #UFCON_OFFSET]
ldr r1, =UBRDIV_VAL
str r1, [r0, #UBRDIV_OFFSET]
ldr r1, =UFRACVAL_VAL
str r1, [r0, #UFRACVAL_OFFSET]
mov pc, lr
nop
nop
nop

View File

@ -1,421 +0,0 @@
/*
* Memory setup for ORIGEN board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include "origen_setup.h"
#define SET_MIU
.globl mem_ctrl_asm_init
mem_ctrl_asm_init:
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
ldr r0, =ASYNC_CONFIG
mov r1, #1
str r1, [r0]
#ifdef SET_MIU
ldr r0, =EXYNOS4_MIU_BASE
/* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
ldr r1, =0x20001507
str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
/* Update MIU Configuration */
ldr r1, =0x00000001
str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
#endif
/* DREX0 */
ldr r0, =EXYNOS4_DMC0_BASE
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/*
* ZQ Calibration
* Termination: Disable
* Auto Calibration Start: Enable
*/
ldr r1, =0xE3855703
str r1, [r0, #DMC_PHYZQCONTROL]
/* Wait ?us*/
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
/* Reset Force DLL Resyncronization */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Enable Differential DQS, DLL Off*/
ldr r1, =0x71101008
str r1, [r0, #DMC_PHYCONTROL0]
/* Activate PHY DLL: DLL On */
ldr r1, =0x7110100A
str r1, [r0, #DMC_PHYCONTROL0]
/* Set DLL Parameters */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* DLL Start */
ldr r1, =0x7110100B
str r1, [r0, #DMC_PHYCONTROL0]
ldr r1, =0x00000000
str r1, [r0, #DMC_PHYCONTROL2]
/* Set Clock Ratio of Bus clock to Memory Clock */
ldr r1, =0x0FFF301a
str r1, [r0, #DMC_CONCONTROL]
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
ldr r1, =0x00312640
str r1, [r0, #DMC_MEMCONTROL]
/*
* Memory Configuration Chip 0
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x20e01323
str r1, [r0, #DMC_MEMCONFIG0]
/*
* Memory Configuration Chip 1
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x40e01323
str r1, [r0, #DMC_MEMCONFIG1]
/* Config Precharge Policy */
ldr r1, =0xff000000
str r1, [r0, #DMC_PRECHCONFIG]
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
ldr r1, =0x000000BB
str r1, [r0, #DMC_TIMINGAREF]
ldr r1, =0x4046654f
str r1, [r0, #DMC_TIMINGROW]
ldr r1, =0x46400506
str r1, [r0, #DMC_TIMINGDATA]
ldr r1, =0x52000A3C
str r1, [r0, #DMC_TIMINGPOWER]
/* Chip0: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00020000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00030000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00010002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00000328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
/* Chip0: ZQINIT */
ldr r1, =0x0a000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
/* Chip1: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00120000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00130000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00110002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00100328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
/* Chip1: ZQINIT */
ldr r1, =0x0a100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Wait ?us*/
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* DREX1 */
ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
/*
* DLL Parameter Setting:
* Termination: Enable R/W
* Phase Delay for DQS Cleaning: 180' Shift
*/
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/*
* ZQ Calibration:
* Termination: Disable
* Auto Calibration Start: Enable
*/
ldr r1, =0xE3855703
str r1, [r0, #DMC_PHYZQCONTROL]
/* Wait ?us*/
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
/*
* Update DLL Information:
* Force DLL Resyncronization
*/
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
/* Reset Force DLL Resyncronization */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Enable Differential DQS, DLL Off*/
ldr r1, =0x71101008
str r1, [r0, #DMC_PHYCONTROL0]
/* Activate PHY DLL: DLL On */
ldr r1, =0x7110100A
str r1, [r0, #DMC_PHYCONTROL0]
/* Set DLL Parameters */
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* DLL Start */
ldr r1, =0x7110100B
str r1, [r0, #DMC_PHYCONTROL0]
ldr r1, =0x00000000
str r1, [r0, #DMC_PHYCONTROL2]
/* Set Clock Ratio of Bus clock to Memory Clock */
ldr r1, =0x0FFF301a
str r1, [r0, #DMC_CONCONTROL]
/*
* Memor Burst length: 8
* Number of chips: 2
* Memory Bus width: 32 bit
* Memory Type: DDR3
* Additional Latancy for PLL: 1 Cycle
*/
ldr r1, =0x00312640
str r1, [r0, #DMC_MEMCONTROL]
/*
* Memory Configuration Chip 0
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x20e01323
str r1, [r0, #DMC_MEMCONFIG0]
/*
* Memory Configuration Chip 1
* Address Mapping: Interleaved
* Number of Column address Bits: 10 bits
* Number of Rows Address Bits: 14
* Number of Banks: 8
*/
ldr r1, =0x40e01323
str r1, [r0, #DMC_MEMCONFIG1]
/* Config Precharge Policy */
ldr r1, =0xff000000
str r1, [r0, #DMC_PRECHCONFIG]
/*
* TimingAref, TimingRow, TimingData, TimingPower Setting:
* Values as per Memory AC Parameters
*/
ldr r1, =0x000000BB
str r1, [r0, #DMC_TIMINGAREF]
ldr r1, =0x4046654f
str r1, [r0, #DMC_TIMINGROW]
ldr r1, =0x46400506
str r1, [r0, #DMC_TIMINGDATA]
ldr r1, =0x52000A3C
str r1, [r0, #DMC_TIMINGPOWER]
/* Chip0: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
/* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00020000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00030000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00010002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00000328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
/* Chip 0: ZQINIT */
ldr r1, =0x0a000000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
/* Chip1: NOP Command: Assert and Hold CKE to high level */
ldr r1, =0x07100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
/* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
ldr r1, =0x00120000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00130000
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00110002
str r1, [r0, #DMC_DIRECTCMD]
ldr r1, =0x00100328
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
/* Chip1: ZQINIT */
ldr r1, =0x0a100000
str r1, [r0, #DMC_DIRECTCMD]
/* Wait ?us*/
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #DMC_PHYCONTROL1]
ldr r1, =0xe0000086
str r1, [r0, #DMC_PHYCONTROL1]
/* Wait ?us*/
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* turn on DREX0, DREX1 */
ldr r0, =EXYNOS4_DMC0_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
ldr r0, =EXYNOS4_DMC1_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #DMC_CONCONTROL]
mov pc, lr

View File

@ -1,58 +0,0 @@
/*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include<common.h>
#include<config.h>
/*
* Copy U-boot from mmc to RAM:
* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
* Pointer to API (Data transfer from mmc to ram)
*/
void copy_uboot_to_ram(void)
{
u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
}
void board_init_f(unsigned long bootflag)
{
__attribute__((noreturn)) void (*uboot)(void);
copy_uboot_to_ram();
/* Jump to U-Boot image */
uboot = (void *)CONFIG_SYS_TEXT_BASE;
(*uboot)();
/* Never returns Here */
}
/* Place Holders */
void board_init_r(gd_t *id, ulong dest_addr)
{
/* Function attribute is no-return */
/* This Function never executes */
while (1)
;
}
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}

View File

@ -25,6 +25,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos4_gpio_part1 *gpio1;
@ -39,6 +41,50 @@ int board_init(void)
return 0;
}
static int board_uart_init(void)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
return err;
}
#endif
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)

View File

@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
SOBJS := lowlevel_init.o
COBJS := clock_init.o
COBJS += dmc_common.o dmc_init_ddr3.o
COBJS += smdk5250_spl.o
ifndef CONFIG_SPL_BUILD
@ -38,14 +34,10 @@ COBJS += smdk5250.o
endif
endif
ifdef CONFIG_SPL_BUILD
COBJS += spl_boot.o
endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
ALL := $(obj).depend $(LIB)
ALL := $(obj).depend $(LIB)
all: $(ALL)

View File

@ -144,7 +144,7 @@ int power_init_board(void)
/* VDD_MIF */
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
MAX77686_BUCK1OUT_1V)) {
MAX77686_BUCK1OUT_1_05V)) {
debug("%s: PMIC %d register write failed\n", __func__,
MAX77686_REG_PMIC_BUCK1OUT);
return -1;
@ -332,6 +332,16 @@ static int board_uart_init(void)
return ret;
}
void board_i2c_init(const void *blob)
{
int i;
for (i = 0; i < CONFIG_MAX_I2C_NUM; i++) {
exynos_pinmux_config((PERIPH_ID_I2C0 + i),
PINMUX_FLAG_NONE);
}
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{

View File

@ -24,18 +24,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
SOBJS := mem_setup.o
SOBJS += lowlevel_init.o
ifndef CONFIG_SPL_BUILD
COBJS += smdkv310.o
endif
ifdef CONFIG_SPL_BUILD
COBJS += mmc_boot.o
endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
ALL := $(obj).depend $(LIB)

View File

@ -1,414 +0,0 @@
/*
* Lowlevel setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
/*
* Register usages:
*
* r5 has zero always
* r7 has GPIO part1 base 0x11400000
* r6 has GPIO part2 base 0x11000000
*/
#define MEM_DLLl_ON
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
push {lr}
/* r5 has always zero */
mov r5, #0
ldr r7, =EXYNOS4_GPIO_PART1_BASE
ldr r6, =EXYNOS4_GPIO_PART2_BASE
/* check reset status */
ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7
ldr r1, [r0]
/* AFTR wakeup reset */
ldr r2, =S5P_CHECK_DIDLE
cmp r1, r2
beq exit_wakeup
/* Sleep wakeup reset */
ldr r2, =S5P_CHECK_SLEEP
cmp r1, r2
beq wakeup_reset
/*
* If U-boot is already running in ram, no need to relocate U-Boot.
* Memory controller must be configured before relocating U-Boot
* in ram.
*/
ldr r0, =0x00ffffff /* r0 <- Mask Bits*/
bic r1, pc, r0 /* pc <- current addr of code */
/* r1 <- unmasked bits of pc */
ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
cmp r1, r2 /* compare r1, r2 */
beq 1f /* r0 == r1 then skip sdram init */
/* init system clock */
bl system_clock_init
/* Memory initialize */
bl mem_ctrl_asm_init
1:
/* for UART */
bl uart_asm_init
bl arch_cpu_init
bl tzpc_init
pop {pc}
wakeup_reset:
bl system_clock_init
bl mem_ctrl_asm_init
bl arch_cpu_init
bl tzpc_init
exit_wakeup:
/* Load return address and jump to kernel */
ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0
/* r1 = physical address of exynos4210_cpu_resume function */
ldr r1, [r0]
/* Jump to kernel*/
mov pc, r1
nop
nop
/*
* system_clock_init: Initialize core clock and bus clock.
* void system_clock_init(void)
*/
system_clock_init:
push {lr}
ldr r0, =EXYNOS4_CLOCK_BASE
/* APLL(1), MPLL(1), CORE(0), HPM(0) */
ldr r1, =0x0101
ldr r2, =0x14200 @CLK_SRC_CPU
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
2: subs r1, r1, #1
bne 2b
ldr r1, =0x00
ldr r2, =0x0C210 @CLK_SRC_TOP0
str r1, [r0, r2]
ldr r1, =0x00
ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET
str r1, [r0, r2]
/* DMC */
ldr r1, =0x00
ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET
str r1, [r0, r2]
/*CLK_SRC_LEFTBUS */
ldr r1, =0x00
ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET
str r1, [r0, r2]
/*CLK_SRC_RIGHTBUS */
ldr r1, =0x00
ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET
str r1, [r0, r2]
/* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
ldr r1, =0x066666
ldr r2, =0x0C240 @ CLK_SRC_FSYS
str r1, [r0, r2]
/* UART[0:4], PWM: SCLKMPLL(6) */
ldr r1, =0x06666666
ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
3: subs r1, r1, #1
bne 3b
/*
* CLK_DIV_CPU0:
*
* PCLK_DBG_RATIO[20] 0x1
* ATB_RATIO[16] 0x3
* PERIPH_RATIO[12] 0x3
* COREM1_RATIO[8] 0x7
* COREM0_RATIO[4] 0x3
*/
ldr r1, =0x0133730
ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET
str r1, [r0, r2]
/* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */
ldr r1, =0x03
ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_DMC0:
*
* CORE_TIMERS_RATIO[28] 0x1
* COPY2_RATIO[24] 0x3
* DMCP_RATIO[20] 0x1
* DMCD_RATIO[16] 0x1
* DMC_RATIO[12] 0x1
* DPHY_RATIO[8] 0x1
* ACP_PCLK_RATIO[4] 0x1
* ACP_RATIO[0] 0x3
*/
ldr r1, =0x13111113
ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_DMC1:
*
* DPM_RATIO[24] 0x1
* DVSEM_RATIO[16] 0x1
* PWI_RATIO[8] 0x1
*/
ldr r1, =0x01010100
ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_LEFRBUS:
*
* GPL_RATIO[4] 0x1
* GDL_RATIO[0] 0x3
*/
ldr r1, =0x013
ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_RIGHTBUS:
*
* GPR_RATIO[4] 0x1
* GDR_RATIO[0] 0x3
*/
ldr r1, =0x013
ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET
str r1, [r0, r2]
/*
* CLK_DIV_TOP:
*
* ONENAND_RATIO[16] 0x0
* ACLK_133_RATIO[12] 0x5
* ACLK_160_RATIO[8] 0x4
* ACLK_100_RATIO[4] 0x7
* ACLK_200_RATIO[0] 0x3
*/
ldr r1, =0x05473
ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET
str r1, [r0, r2]
/* MMC[0:1] */
ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C544 @ CLK_DIV_FSYS1
str r1, [r0, r2]
/* MMC[2:3] */
ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C548 @ CLK_DIV_FSYS2
str r1, [r0, r2]
/* MMC4 */
ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
ldr r2, =0x0C54C @ CLK_DIV_FSYS3
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x10000
4: subs r1, r1, #1
bne 4b
/*
* CLK_DIV_PERIL0:
*
* UART5_RATIO[20] 8
* UART4_RATIO[16] 8
* UART3_RATIO[12] 8
* UART2_RATIO[8] 8
* UART1_RATIO[4] 8
* UART0_RATIO[0] 8
*/
ldr r1, =0x774777
ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET
str r1, [r0, r2]
/* SLIMBUS: ???, PWM */
ldr r1, =0x8
ldr r2, =0x0C55C @ CLK_DIV_PERIL3
str r1, [r0, r2]
/* Set PLL locktime */
ldr r1, =0x01C20
ldr r2, =0x014000 @APLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x014008 @MPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x0C010 @EPLL_LOCK_OFFSET
str r1, [r0, r2]
ldr r1, =0x01C20
ldr r2, =0x0C020 @VPLL_LOCK_OFFSET
str r1, [r0, r2]
/*
* APLL_CON1:
*
* APLL_AFC_ENB[31] 0x1
* APLL_AFC[0] 0xC
*/
ldr r1, =0x8000000C
ldr r2, =0x014104 @APLL_CON1_OFFSET
str r1, [r0, r2]
/*
* APLL_CON0:
*
* APLL_MDIV[16] 0xFA
* APLL_PDIV[8] 0x6
* APLL_SDIV[0] 0x1
*/
ldr r1, =0x80FA0601
ldr r2, =0x014100 @APLL_CON0_OFFSET
str r1, [r0, r2]
/*
* MPLL_CON1:
*
* MPLL_AFC_ENB[31] 0x1
* MPLL_AFC[0] 0x1C
*/
ldr r1, =0x0000001C
ldr r2, =0x01410C @MPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* MPLL_CON0:
*
* MPLL_MDIV[16] 0xC8
* MPLL_PDIV[8] 0x6
* MPLL_SDIV[0] 0x1
*/
ldr r1, =0x80C80601
ldr r2, =0x014108 @MPLL_CON0_OFFSET
str r1, [r0, r2]
/* EPLL */
ldr r1, =0x0
ldr r2, =0x0C114 @EPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* EPLL_CON0:
*
* EPLL_MDIV[16] 0x30
* EPLL_PDIV[8] 0x3
* EPLL_SDIV[0] 0x2
*/
ldr r1, =0x80300302
ldr r2, =0x0C110 @EPLL_CON0_OFFSET
str r1, [r0, r2]
/*
* VPLL_CON1:
*
* VPLL_MRR[24] 0x11
* VPLL_MFR[16] 0x0
* VPLL_K[0] 0x400
*/
ldr r1, =0x11000400
ldr r2, =0x0C124 @VPLL_CON1_OFFSET
str r1, [r0, r2]
/*
* VPLL_CON0:
*
* VPLL_MDIV[16] 0x35
* VPLL_PDIV[8] 0x3
* VPLL_SDIV[0] 0x2
*/
ldr r1, =0x80350302
ldr r2, =0x0C120 @VPLL_CON0_OFFSET
str r1, [r0, r2]
/* wait ?us */
mov r1, #0x30000
3: subs r1, r1, #1
bne 3b
pop {pc}
/*
* uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
* void uart_asm_init(void)
*/
.globl uart_asm_init
uart_asm_init:
/* setup UART0-UART3 GPIOs (part1) */
mov r0, r7
ldr r1, =0x22222222
str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
ldr r1, =0x00222222
str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
ldr r0, =EXYNOS4_UART_BASE
add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
ldr r1, =0x3C5
str r1, [r0, #0x4]
ldr r1, =0x111
str r1, [r0, #0x8]
ldr r1, =0x3
str r1, [r0, #0x0]
ldr r1, =0x35
str r1, [r0, #0x28]
ldr r1, =0x4
str r1, [r0, #0x2c]
mov pc, lr
nop
nop
nop

View File

@ -1,365 +0,0 @@
/*
* Memory setup for SMDKV310 board based on EXYNOS4210
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#define SET_MIU
#define MEM_DLL
#ifdef CONFIG_CLK_800_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_200_200
#define DRAM_CLK_200
#endif
#ifdef CONFIG_CLK_1000_330_165
#define DRAM_CLK_330
#endif
#ifdef CONFIG_CLK_1000_400_200
#define DRAM_CLK_400
#endif
.globl mem_ctrl_asm_init
mem_ctrl_asm_init:
/*
* Async bridge configuration at CPU_core:
* 1: half_sync
* 0: full_sync
*/
ldr r0, =0x10010350
mov r1, #1
str r1, [r0]
#ifdef SET_MIU
ldr r0, =EXYNOS4_MIU_BASE @0x10600000
#ifdef CONFIG_MIU_1BIT_INTERLEAVED
ldr r1, =0x0000000c
str r1, [r0, #0x400] @MIU_INTLV_CONFIG
ldr r1, =0x40000000
str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
ldr r1, =0xbfffffff
str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
ldr r1, =0x00000001
str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
#endif
#ifdef CONFIG_MIU_2BIT_INTERLEAVED
ldr r1, =0x2000150c
str r1, [r0, #0x400] @MIU_INTLV_CONFIG
ldr r1, =0x40000000
str r1, [r0, #0x808] @MIU_INTLV_START_ADDR
ldr r1, =0xbfffffff
str r1, [r0, #0x810] @MIU_INTLV_END_ADDR
ldr r1, =0x00000001
str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
#endif
#ifdef CONFIG_MIU_LINEAR
ldr r1, =0x40000000
str r1, [r0, #0x818] @MIU_SINGLE_MAPPING0_START_ADDR
ldr r1, =0x7fffffff
str r1, [r0, #0x820] @MIU_SINGLE_MAPPING0_END_ADDR
ldr r1, =0x80000000
str r1, [r0, #0x828] @MIU_SINGLE_MAPPING1_START_ADDR
ldr r1, =0xbfffffff
str r1, [r0, #0x830] @MIU_SINGLE_MAPPING1_END_ADDR]
ldr r1, =0x00000006
str r1, [r0, #0x800] @MIU_MAPPING_UPDATE
#endif
#endif
/* DREX0 */
ldr r0, =EXYNOS4_DMC0_BASE @0x10400000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xE3855703
str r1, [r0, #0x44] @DMC_PHYZQCONTROL
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x71101008
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x7110100A
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x7110100B
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x00000000
str r1, [r0, #0x20] @DMC_PHYCONTROL2
ldr r1, =0x0FFF301a
str r1, [r0, #0x00] @DMC_CONCONTROL
ldr r1, =0x00312640
str r1, [r0, #0x04] @DMC_MEMCONTROL]
#ifdef CONFIG_MIU_LINEAR
ldr r1, =0x40e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x60e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
ldr r1, =0x20e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x40e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#endif
ldr r1, =0xff000000
str r1, [r0, #0x14] @DMC_PRECHCONFIG
ldr r1, =0x000000BC
str r1, [r0, #0x30] @DMC_TIMINGAREF
#ifdef DRAM_CLK_330
ldr r1, =0x3545548d
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x45430506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x4439033c
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
#ifdef DRAM_CLK_400
ldr r1, =0x4046654f
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x56500506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x5444033d
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
ldr r1, =0x07000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
ldr r1, =0x00020000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00030000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00010002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00000328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
ldr r1, =0x0a000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
ldr r1, =0x07100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
ldr r1, =0x00120000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00130000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00110002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00100328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
ldr r1, =0x0a100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* DREX1 */
ldr r0, =EXYNOS4_DMC1_BASE @0x10410000
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xE3855703
str r1, [r0, #0x44] @DMC_PHYZQCONTROL
mov r2, #0x100000
1: subs r2, r2, #1
bne 1b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x71101008
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x7110100A
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0x7110100B
str r1, [r0, #0x18] @DMC_PHYCONTROL0
ldr r1, =0x00000000
str r1, [r0, #0x20] @DMC_PHYCONTROL2
ldr r1, =0x0FFF301a
str r1, [r0, #0x00] @DMC_CONCONTROL
ldr r1, =0x00312640
str r1, [r0, #0x04] @DMC_MEMCONTROL]
#ifdef CONFIG_MIU_LINEAR
ldr r1, =0x40e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x60e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */
ldr r1, =0x20e01323
str r1, [r0, #0x08] @DMC_MEMCONFIG0
ldr r1, =0x40e01323
str r1, [r0, #0x0C] @DMC_MEMCONFIG1
#endif
ldr r1, =0xff000000
str r1, [r0, #0x14] @DMC_PRECHCONFIG
ldr r1, =0x000000BC
str r1, [r0, #0x30] @DMC_TIMINGAREF
#ifdef DRAM_CLK_330
ldr r1, =0x3545548d
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x45430506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x4439033c
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
#ifdef DRAM_CLK_400
ldr r1, =0x4046654f
str r1, [r0, #0x34] @DMC_TIMINGROW
ldr r1, =0x56500506
str r1, [r0, #0x38] @DMC_TIMINGDATA
ldr r1, =0x5444033d
str r1, [r0, #0x3C] @DMC_TIMINGPOWER
#endif
ldr r1, =0x07000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
2: subs r2, r2, #1
bne 2b
ldr r1, =0x00020000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00030000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00010002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00000328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
3: subs r2, r2, #1
bne 3b
ldr r1, =0x0a000000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
4: subs r2, r2, #1
bne 4b
ldr r1, =0x07100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
5: subs r2, r2, #1
bne 5b
ldr r1, =0x00120000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00130000
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00110002
str r1, [r0, #0x10] @DMC_DIRECTCMD
ldr r1, =0x00100328
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
6: subs r2, r2, #1
bne 6b
ldr r1, =0x0a100000
str r1, [r0, #0x10] @DMC_DIRECTCMD
mov r2, #0x100000
7: subs r2, r2, #1
bne 7b
ldr r1, =0xe000008e
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
ldr r1, =0xe0000086
str r1, [r0, #0x1C] @DMC_PHYCONTROL1
mov r2, #0x100000
8: subs r2, r2, #1
bne 8b
/* turn on DREX0, DREX1 */
ldr r0, =0x10400000 @APB_DMC_0_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #0x00] @DMC_CONCONTROL
ldr r0, =0x10410000 @APB_DMC_1_BASE
ldr r1, =0x0FFF303a
str r1, [r0, #0x00] @DMC_CONCONTROL
mov pc, lr

View File

@ -1,60 +0,0 @@
/*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include<common.h>
#include<config.h>
/*
* Copy U-boot from mmc to RAM:
* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
* API (Data transfer from mmc to ram)
*/
void copy_uboot_to_ram(void)
{
u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR;
copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
}
void board_init_f(unsigned long bootflag)
{
__attribute__((noreturn)) void (*uboot)(void);
copy_uboot_to_ram();
/* Jump to U-Boot image */
uboot = (void *)CONFIG_SYS_TEXT_BASE;
(*uboot)();
/* Never returns Here */
}
/* Place Holders */
void board_init_r(gd_t *id, ulong dest_addr)
{
/*Function attribute is no-return*/
/*This Function never executes*/
while (1)
;
}
void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
{
}

View File

@ -26,6 +26,8 @@
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/periph.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
@ -137,3 +139,47 @@ int board_mmc_init(bd_t *bis)
return err;
}
#endif
static int board_uart_init(void)
{
int err;
err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
if (err) {
debug("UART0 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
if (err) {
debug("UART1 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
if (err) {
debug("UART2 not configured\n");
return err;
}
err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
if (err) {
debug("UART3 not configured\n");
return err;
}
return 0;
}
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
int err;
err = board_uart_init();
if (err) {
debug("UART init failed\n");
return err;
}
return err;
}
#endif

View File

@ -61,7 +61,7 @@ int gpio_set_value(unsigned gpio, int value)
else
l &= ~bit;
return writel(port, l);
return writel(l, port);
}
int gpio_get_value(unsigned gpio)
@ -85,11 +85,11 @@ int gpio_free(unsigned gpio)
int gpio_direction_input(unsigned gpio)
{
return writel(GPIO_FULLPORT(gpio), GPIO_INPUT << GPIO_BIT(gpio));
return writel(GPIO_INPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
}
int gpio_direction_output(unsigned gpio, int value)
{
writel(GPIO_FULLPORT(gpio), GPIO_OUTPUT << GPIO_BIT(gpio));
writel(GPIO_OUTPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio));
return gpio_set_value(gpio, value);
}

View File

@ -48,15 +48,8 @@ void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
value = readl(&bank->dat);
value &= ~DAT_MASK(gpio);
if (en)
value |= DAT_SET(gpio);
writel(value, &bank->dat);
s5p_gpio_set_value(bank, gpio, en);
}
void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)

View File

@ -518,8 +518,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
#ifdef CONFIG_OF_CONTROL
void board_i2c_init(const void *blob)
{
int i;
int node_list[CONFIG_MAX_I2C_NUM];
int count, i;
int count;
count = fdtdec_find_aliases_for_id(blob, "i2c",
COMPAT_SAMSUNG_S3C2440_I2C, node_list,

View File

@ -41,18 +41,23 @@ static int power_battery_charge(struct pmic *bat)
for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) &&
bat->chrg->chrg_type(p_bat->muic) &&
battery->state_of_chrg < 100; k++) {
udelay(10000000);
puts(".");
udelay(2000000);
if (!(k % 5))
puts(".");
bat->fg->fg_battery_update(p_bat->fg, bat);
if (k == 100) {
if (k == 200) {
debug(" %d [V]", battery->voltage_uV);
puts("\n");
k = 0;
}
if (ctrlc()) {
printf("\nCharging disabled on request.\n");
goto exit;
}
}
exit:
bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0);
return 0;

View File

@ -205,7 +205,8 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (strcmp(argv[3], "charge") == 0) {
if (p->pbat) {
printf("PRINT BAT charge %s\n", p->name);
printf("BAT: %s charging (ctrl+c to break)\n",
p->name);
if (p->low_power_mode)
p->low_power_mode();
if (p->pbat->battery_charge)

View File

@ -22,6 +22,7 @@
*/
#include <common.h>
#include <fdtdec.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/uart.h>
@ -34,10 +35,21 @@ DECLARE_GLOBAL_DATA_PTR;
#define RX_FIFO_FULL_MASK (1 << 8)
#define TX_FIFO_FULL_MASK (1 << 24)
/* Information about a serial port */
struct fdt_serial {
u32 base_addr; /* address of registers in physical memory */
u8 port_id; /* uart port number */
u8 enabled; /* 1 if enabled, 0 if disabled */
} config __attribute__ ((section(".data")));
static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
#ifdef CONFIG_OF_CONTROL
return (struct s5p_uart *)(config.base_addr);
#else
u32 offset = dev_index * sizeof(struct s5p_uart);
return (struct s5p_uart *)(samsung_get_base_uart() + offset);
#endif
}
/*
@ -73,6 +85,16 @@ void serial_setbrg_dev(const int dev_index)
u32 baudrate = gd->baudrate;
u32 val;
#if defined(CONFIG_SILENT_CONSOLE) && \
defined(CONFIG_OF_CONTROL) && \
!defined(CONFIG_SPL_BUILD)
if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0))
gd->flags |= GD_FLG_SILENT;
#endif
if (!config.enabled)
return;
val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv);
@ -133,6 +155,9 @@ int serial_getc_dev(const int dev_index)
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
if (!config.enabled)
return 0;
/* wait for character to arrive */
while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
@ -150,6 +175,9 @@ void serial_putc_dev(const char c, const int dev_index)
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
if (!config.enabled)
return;
/* wait for room in the tx FIFO */
while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (serial_err_check(dev_index, 1))
@ -170,6 +198,9 @@ int serial_tstc_dev(const int dev_index)
{
struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
if (!config.enabled)
return 0;
return (int)(readl(&uart->utrstat) & 0x1);
}
@ -212,8 +243,54 @@ DECLARE_S5P_SERIAL_FUNCTIONS(3);
struct serial_device s5p_serial3_device =
INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3");
#ifdef CONFIG_OF_CONTROL
int fdtdec_decode_console(int *index, struct fdt_serial *uart)
{
const void *blob = gd->fdt_blob;
int node;
node = fdt_path_offset(blob, "console");
if (node < 0)
return node;
uart->base_addr = fdtdec_get_addr(blob, node, "reg");
if (uart->base_addr == FDT_ADDR_T_NONE)
return -FDT_ERR_NOTFOUND;
uart->port_id = fdtdec_get_int(blob, node, "id", -1);
uart->enabled = fdtdec_get_is_enabled(blob, node);
return 0;
}
#endif
__weak struct serial_device *default_serial_console(void)
{
#ifdef CONFIG_OF_CONTROL
int index = 0;
if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) {
debug("Cannot decode default console node\n");
return NULL;
}
switch (config.port_id) {
case 0:
return &s5p_serial0_device;
case 1:
return &s5p_serial1_device;
case 2:
return &s5p_serial2_device;
case 3:
return &s5p_serial3_device;
default:
debug("Unknown config.port_id: %d", config.port_id);
break;
}
return NULL;
#else
config.enabled = 1;
#if defined(CONFIG_SERIAL0)
return &s5p_serial0_device;
#elif defined(CONFIG_SERIAL1)
@ -225,6 +302,7 @@ __weak struct serial_device *default_serial_console(void)
#else
#error "CONFIG_SERIAL? missing."
#endif
#endif
}
void s5p_serial_initialize(void)

View File

@ -280,8 +280,9 @@ void exynos_fimd_lcd_init(vidinfo_t *vid)
node, "reg");
if (fimd_ctrl == NULL)
debug("Can't get the FIMD base address\n");
#endif
#else
fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd();
#endif
offset = exynos_fimd_get_base_offset();

View File

@ -78,9 +78,9 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL3 /* use SERIAL 3 */
#define CONFIG_BAUDRATE 115200
#define EXYNOS5_DEFAULT_UART_OFFSET 0x010000
#define CONFIG_SILENT_CONSOLE
/* Console configuration */
#define CONFIG_CONSOLE_MUX
@ -104,6 +104,7 @@
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_SKIP_LOWLEVEL_INIT
/* PWM */
#define CONFIG_PWM
@ -137,6 +138,7 @@
#define CONFIG_USB_STORAGE
/* USB boot mode */
#define CONFIG_USB_BOOTING
#define EXYNOS_COPY_USB_FNPTR_ADDR 0x02020070
#define EXYNOS_USB_SECONDARY_BOOT 0xfeed0002
#define EXYNOS_IRAM_SECONDARY_BASE 0x02020018
@ -152,8 +154,10 @@
#define CONFIG_SPL
#define COPY_BL2_FNPTR_ADDR 0x02020030
#define CONFIG_SPL_LIBCOMMON_SUPPORT
/* specific .lds file */
#define CONFIG_SPL_LDSCRIPT "board/samsung/smdk5250/smdk5250-uboot-spl.lds"
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x02023400
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
@ -229,7 +233,7 @@
#define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512)
#define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512)
#define OM_STAT (0x1f << 1)
#define CONFIG_SPI_BOOTING
#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058
#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
@ -241,7 +245,7 @@
#define CONFIG_IRAM_STACK 0x02050000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_IRAM_STACK
/* I2C */
#define CONFIG_SYS_I2C_INIT_BOARD

View File

@ -36,6 +36,7 @@
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
/* Keep L2 Cache Disabled */
#define CONFIG_L2_OFF 1
@ -67,6 +68,8 @@
#define CONFIG_BAUDRATE 115200
#define EXYNOS4_DEFAULT_UART_OFFSET 0x020000
#define CONFIG_SKIP_LOWLEVEL_INIT
/* SD/MMC configuration */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
@ -147,7 +150,10 @@
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
#define CONFIG_SYS_INIT_SP_ADDR 0x02040000
/* U-boot copy size from boot Media to DRAM.*/
#define COPY_BL2_SIZE 0x80000
@ -156,4 +162,5 @@
/* Enable devicetree support */
#define CONFIG_OF_LIBFDT
#endif /* __CONFIG_H */

View File

@ -36,6 +36,7 @@
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
/* Mach Type */
#define CONFIG_MACH_TYPE MACH_TYPE_SMDKV310
@ -57,6 +58,7 @@
/* Handling Sleep Mode*/
#define S5P_CHECK_SLEEP 0x00000BAD
#define S5P_CHECK_DIDLE 0xBAD00000
#define S5P_CHECK_LPA 0xABAD0000
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
@ -93,6 +95,7 @@
/* MMC SPL */
#define CONFIG_SPL
#define CONFIG_SKIP_LOWLEVEL_INIT
#define COPY_BL2_FNPTR_ADDR 0x00002488
#define CONFIG_SPL_TEXT_BASE 0x02021410
@ -146,7 +149,10 @@
#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds"
#define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024)
#define CONFIG_SYS_INIT_SP_ADDR 0x02040000
/* U-boot copy size from boot Media to DRAM.*/
#define COPY_BL2_SIZE 0x80000

View File

@ -66,7 +66,7 @@
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (16 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL2 /* use SERIAL 2 */

View File

@ -90,6 +90,7 @@ enum fdt_compat_id {
COMPAT_SAMSUNG_EXYNOS_FIMD, /* Exynos Display controller */
COMPAT_SAMSUNG_EXYNOS5_DP, /* Exynos Display port controller */
COMPAT_SAMSUNG_EXYNOS5_DWMMC, /* Exynos5 DWMMC controller */
COMPAT_SAMSUNG_EXYNOS_SERIAL, /* Exynos UART */
COMPAT_MAXIM_MAX77686_PMIC, /* MAX77686 PMIC */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */

View File

@ -157,6 +157,8 @@ enum {
/* Buck1 1 volt value */
#define MAX77686_BUCK1OUT_1V 0x5
/* Buck1 1.05 volt value */
#define MAX77686_BUCK1OUT_1_05V 0x6
#define MAX77686_BUCK1CTRL_EN (3 << 0)
/* Buck2 1.3 volt value */
#define MAX77686_BUCK2DVS1_1_3V 0x38

View File

@ -63,6 +63,7 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(SAMSUNG_EXYNOS_FIMD, "samsung,exynos-fimd"),
COMPAT(SAMSUNG_EXYNOS5_DP, "samsung,exynos5-dp"),
COMPAT(SAMSUNG_EXYNOS5_DWMMC, "samsung,exynos5250-dwmmc"),
COMPAT(SAMSUNG_EXYNOS_SERIAL, "samsung,exynos4210-uart"),
COMPAT(MAXIM_MAX77686_PMIC, "maxim,max77686_pmic"),
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),