brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-09-30 00:20:44 +09:00
Code Issues Projects Releases Wiki Activity

ARM: UniPhier: optimize kicking secondary CPUs code

Browse Source 
Currently, the secondary CPU(s) are kicked three times:
Boot ROM ---(kick)--> SPL ---(kick)--> U-boot ---(kick)--> Linux.
It makes the boot sequence very complicated.

This commit merges the first and the second kicks, so the secondary
CPU(s) can directly jump from SPL to Linux.
arch/arm/mach-uniphier/smp.S is no longer necessary.

Linux boot test passed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit is contained in:
Masahiro Yamada 2015-03-23 00:07:31 +09:00
parent 4d13b1b708
commit 62118b7b01
4 changed files with 38 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/mach-uniphier/Makefile
View File

@ -22,7 +22,6 @@ obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
obj-y += reset.o
obj-y += cache_uniphier.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o

13
arch/arm/mach-uniphier/cache_uniphier.c
View File

@ -1,6 +1,7 @@
/*
* Copyright (C) 2012-2014 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
* Copyright (C) 2015 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@ -119,20 +120,10 @@ void v7_outer_cache_disable(void)
writel(tmp, SSCC);
}
void wakeup_secondary(void);
void enable_caches(void)
{
uint32_t reg;
#ifdef CONFIG_UNIPHIER_SMP
/*
* The secondary CPU must move to DDR,
* before L2 disable.
* On SPL, the Page Table is located on the L2.
*/
wakeup_secondary();
#endif
/*
* UniPhier SoCs must use L2 cache for init stack pointer.
* We disable L2 and L1 in this order.

42
arch/arm/mach-uniphier/lowlevel_init.S
View File

@ -48,6 +48,25 @@ ENTRY(lowlevel_init)
bl enable_mmu
#ifdef CONFIG_UNIPHIER_SMP
secondary_startup:
/*
* Entry point for secondary CPUs
*
* The Boot ROM has already enabled MMU for the secondary CPUs as well
* as for the primary one. The MMU table embedded in the Boot ROM
* prohibits the DRAM access, so it is impossible to bring the
* secondary CPUs into DRAM directly. They must jump here into SPL,
* which is run on L2 cache.
*
* Boot Sequence
* [primary CPU] [secondary CPUs]
* start from Boot ROM start from Boot ROM
* jump to SPL sleep in Boot ROM
* kick secondaries ---(sev)---> jump to SPL
* jump to U-Boot main sleep in SPL
* jump to Linux
* kick secondaries ---(sev)---> jump to Linux
*/
/*
* ACTLR (Auxiliary Control Register) for Cortex-A9
* bit[9] Parity on
@ -68,17 +87,28 @@ ENTRY(lowlevel_init)
and r0, r0, #0x3
cmp r0, #0x0
beq primary_cpu
ldr r1, =ROM_BOOT_ROMRSV2
/* only for secondary CPUs */
ldr r1, =ROM_BOOT_ROMRSV2 @ The last data access to L2 cache
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Control Register)
orr r0, r0, #CR_I @ Enable ICache
bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache must be disabled
mcr p15, 0, r0, c1, c0, 0 @ before jumping to Linux
mov r0, #0
str r0, [r1]
0: wfe
ldr r0, [r1]
b 1f
/*
* L2 cache is shared among all the CPUs and it might be disabled by
* the primary one. Before that, the following 5 lines must be cached
* on the Icaches of the secondary CPUs.
*/
0: wfe @ kicked by Linux
1: ldr r0, [r1]
cmp r0, #0
beq 0b
bx r0 @ r0: entry point of U-Boot main for the secondary CPU
bxne r0 @ r0: Linux entry for secondary CPUs
b 0b
primary_cpu:
ldr r1, =ROM_BOOT_ROMRSV2
ldr r0, =_start @ entry for the secondary CPU
ldr r0, =secondary_startup
str r0, [r1]
ldr r0, [r1] @ make sure str is complete before sev
sev @ kick the secondary CPU

54
arch/arm/mach-uniphier/smp.S
View File

@ -1,54 +0,0 @@
/*
* Copyright (C) 2013 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <linux/linkage.h>
#include <asm/system.h>
#include <mach/led.h>
#include <mach/sbc-regs.h>
/* Entry point of U-Boot main program for the secondary CPU */
LENTRY(secondary_entry)
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register)
bic r0, r0, #(CR_C | CR_M) @ MMU and Dcache disable
mcr p15, 0, r0, c1, c0, 0
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, r0, c7, c5, 0 @ invalidate icache
dsb
led_write(C,0,,)
ldr r1, =ROM_BOOT_ROMRSV2
mov r0, #0
str r0, [r1]
0: wfe
ldr r4, [r1] @ r4: entry point for secondary CPUs
cmp r4, #0
beq 0b
led_write(C, P, U, 1)
bx r4 @ secondary CPUs jump to linux
ENDPROC(secondary_entry)
ENTRY(wakeup_secondary)
ldr r1, =ROM_BOOT_ROMRSV2
0: ldr r0, [r1]
cmp r0, #0
bne 0b
/* set entry address and send event to the secondary CPU */
ldr r0, =secondary_entry
str r0, [r1]
ldr r0, [r1] @ make sure store is complete
mov r0, #0x100
0: subs r0, r0, #1 @ I don't know the reason, but without this wait
bne 0b @ fails to wake up the secondary CPU
sev
/* wait until the secondary CPU reach to secondary_entry */
0: ldr r0, [r1]
cmp r0, #0
bne 0b
bx lr
ENDPROC(wakeup_secondary)