brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

UniPhier SoC updates for v2020.10

Browse Source 
- remove workaround for Cortex-A72
 
  - increase U-Boot proper size to 2MB
 
  - sync DT with Linux
 
  - add system bus controller driver
 
  - improve serial driver
 
  - add reset assertion to Denali NAND driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl8JxkseHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGWJwP/AoA+MrBcm5HebBI
 /jHfDbI0pXe+G+FsNf2ksoCbaeNQLQQZZJSFyvArRS2DB6uqdylQEK4COblXM4TN
 X2VTB0AzLoUhKeRD6wh5FOeeNfyM9ejm7yHu986dQ7imBjz5uDNUPV/WmP2zxYk+
 yLH9I1n2bStCd+b7OFG1yUA9HPLe0H9ZesuotMvRw+OkDaF89R53uJQpmemeRp0U
 78taiMTZctQ5LJOQWqsEmBBtk/eMiz2uu10+PgI807hNic4NDUQFP1bPnJvo2WBc
 T4s5G3y5KVbZGf3mcXJGqTtDBAqTJltAAN83U6yi92SmW9mpUAJ4db0hvKb90q1W
 5Zl/DVwjWfBmIWS8yObDDmjncenmbnxzUS9D/Gsw9sKflK9uDsk9O+NiVppYfD8R
 rIFwFjMqzcf+wcnM23TsjmDvy7PmlArpEHrqSLk5g56wW1urjQSN38VJfPY01TwA
 bNAGbCOwMH9809p0VzMNOuu0EKxGhWoeqREjUNVgEXVrzF9G7MZxVuNSJSUeqwsA
 oMT512gGd9WjOg4M13Hj0TzcvWo6p3wYf1pBcfZbqDdR5KxPasdnhz0AiFA7QvwR
 +EoczvPWJFgebFe9m9NmMdTb9AjF5PKheAlWe3imTdOINlVm5Qiudlwnd8lXkfVi
 pUBxiqNhaq/UjF3bpw7/Cq+CCRKu
 =lxb5
 -----END PGP SIGNATURE-----

Merge tag 'uniphier-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier

UniPhier SoC updates for v2020.10

 - remove workaround for Cortex-A72

 - increase U-Boot proper size to 2MB

 - sync DT with Linux

 - add system bus controller driver

 - improve serial driver

 - add reset assertion to Denali NAND driver
This commit is contained in:
Tom Rini 2020-07-11 11:50:49 -04:00
commit 610e1487c8
47 changed files with 432 additions and 593 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/dts/uniphier-ld11-global.dts
View File

@ -30,6 +30,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
ethernet0 = ð
};
memory@80000000 {

1
arch/arm/dts/uniphier-ld11-ref.dts
View File

@ -29,6 +29,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
ethernet0 = ð
};
memory@80000000 {

16
arch/arm/dts/uniphier-ld11.dtsi
View File

@ -129,6 +129,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
@ -140,11 +142,13 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 216 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 12>;
resets = <&peri_rst 12>;
};
serial0: serial@54006800 {
@ -566,6 +570,14 @@
};
};
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
interrupts = <0 188 4>;
dma-channels = <16>;
#dma-cells = <2>;
};
aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-ld11-aidet";
reg = <0x5fc20000 0x200>;

1
arch/arm/dts/uniphier-ld20-global.dts
View File

@ -30,6 +30,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
ethernet0 = &eth;
};
memory@80000000 {

1
arch/arm/dts/uniphier-ld20-ref.dts
View File

@ -29,6 +29,7 @@
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
ethernet0 = &eth;
};
memory@80000000 {

28
arch/arm/dts/uniphier-ld20.dtsi
View File

@ -234,6 +234,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
@ -245,33 +247,39 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 216 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 12>;
resets = <&peri_rst 12>;
};
spi2: spi@54006200 {
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006200 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 229 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 13>;
resets = <&peri_rst 13>;
};
spi3: spi@54006300 {
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006300 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 230 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi3>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 14>;
resets = <&peri_rst 14>;
};
serial0: serial@54006800 {
@ -664,6 +672,14 @@
};
};
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
interrupts = <0 188 4>;
dma-channels = <16>;
#dma-cells = <2>;
};
aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-ld20-aidet";
reg = <0x5fc20000 0x200>;

2
arch/arm/dts/uniphier-ld4.dtsi
View File

@ -67,6 +67,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;

1
arch/arm/dts/uniphier-ld6b-ref.dts
View File

@ -29,6 +29,7 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
ethernet0 = &eth;
};
memory@80000000 {

1
arch/arm/dts/uniphier-pro4-ace.dts
View File

@ -26,6 +26,7 @@
i2c3 = &i2c3;
i2c5 = &i2c5;
i2c6 = &i2c6;
ethernet0 = &eth;
};
memory@80000000 {

1
arch/arm/dts/uniphier-pro4-ref.dts
View File

@ -30,6 +30,7 @@
i2c5 = &i2c5;
i2c6 = &i2c6;
usb0 = &usb0;
ethernet0 = &eth;
};
memory@80000000 {

10
arch/arm/dts/uniphier-pro4.dtsi
View File

@ -75,6 +75,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
@ -426,6 +428,14 @@
};
};
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
interrupts = <0 188 4>;
dma-channels = <16>;
#dma-cells = <2>;
};
aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-pro4-aidet";
reg = <0x5fc20000 0x200>;

16
arch/arm/dts/uniphier-pro5.dtsi
View File

@ -160,6 +160,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
@ -171,11 +173,13 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 216 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 11>; /* common with spi0 */
resets = <&peri_rst 12>;
};
serial0: serial@54006800 {
@ -408,6 +412,14 @@
};
};
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
interrupts = <0 188 4>;
dma-channels = <16>;
#dma-cells = <2>;
};
aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-pro5-aidet";
reg = <0x5fc20000 0x200>;

1
arch/arm/dts/uniphier-pxs2-gentil.dts
View File

@ -26,6 +26,7 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
ethernet0 = &eth;
};
memory@80000000 {

1
arch/arm/dts/uniphier-pxs2-vodka.dts
View File

@ -24,6 +24,7 @@
i2c4 = &i2c4;
i2c5 = &i2c5;
i2c6 = &i2c6;
ethernet0 = &eth;
};
memory@80000000 {

16
arch/arm/dts/uniphier-pxs2.dtsi
View File

@ -173,6 +173,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
@ -184,11 +186,13 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 216 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 12>;
resets = <&peri_rst 12>;
};
serial0: serial@54006800 {
@ -508,6 +512,14 @@
};
};
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
interrupts = <0 188 4>;
dma-channels = <16>;
#dma-cells = <2>;
};
aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-pxs2-aidet";
reg = <0x5fc20000 0x200>;

28
arch/arm/dts/uniphier-pxs3-ref.dts
View File

@ -27,6 +27,10 @@
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c6 = &i2c6;
spi0 = &spi0;
spi1 = &spi1;
ethernet0 = &eth0;
ethernet1 = &eth1;
};
memory@80000000 {
@ -39,6 +43,14 @@
interrupts = <4 8>;
};
&spi0 {
status = "okay";
};
&spi1 {
status = "okay";
};
&serial0 {
status = "okay";
};
@ -116,3 +128,19 @@
&nand {
status = "okay";
};
&pinctrl_ether_rgmii {
tx {
pins = "RGMII0_TXCLK", "RGMII0_TXD0", "RGMII0_TXD1",
"RGMII0_TXD2", "RGMII0_TXD3", "RGMII0_TXCTL";
drive-strength = <9>;
};
};
&pinctrl_ether1_rgmii {
tx {
pins = "RGMII1_TXCLK", "RGMII1_TXD0", "RGMII1_TXD1",
"RGMII1_TXD2", "RGMII1_TXD3", "RGMII1_TXCTL";
drive-strength = <9>;
};
};

59
arch/arm/dts/uniphier-pxs3.dtsi
View File

@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "socionext,uniphier-pxs3";
@ -42,6 +43,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
cpu1: cpu@1 {
@ -51,6 +53,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
cpu2: cpu@2 {
@ -60,6 +63,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
cpu3: cpu@3 {
@ -69,6 +73,7 @@
clocks = <&sys_clk 33>;
enable-method = "psci";
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
};
@ -136,6 +141,37 @@
<1 10 4>;
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>; /* 250ms */
polling-delay = <1000>; /* 1000ms */
thermal-sensors = <&pvtctl>;
trips {
cpu_crit: cpu-crit {
temperature = <110000>; /* 110C */
hysteresis = <2000>;
type = "critical";
};
cpu_alert: cpu-alert {
temperature = <100000>; /* 100C */
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@ -157,6 +193,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
@ -168,11 +206,13 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006100 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 216 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
clocks = <&peri_clk 11>;
resets = <&peri_rst 11>;
clocks = <&peri_clk 12>;
resets = <&peri_rst 12>;
};
serial0: serial@54006800 {
@ -462,6 +502,14 @@
};
};
xdmac: dma-controller@5fc10000 {
compatible = "socionext,uniphier-xdmac";
reg = <0x5fc10000 0x5300>;
interrupts = <0 188 4>;
dma-channels = <16>;
#dma-cells = <2>;
};
aidet: interrupt-controller@5fc20000 {
compatible = "socionext,uniphier-pxs3-aidet";
reg = <0x5fc20000 0x200>;
@ -496,6 +544,13 @@
watchdog {
compatible = "socionext,uniphier-wdt";
};
pvtctl: pvtctl {
compatible = "socionext,uniphier-pxs3-thermal";
interrupts = <0 3 4>;
#thermal-sensor-cells = <0>;
socionext,tmod-calibration = <0x0f22 0x68ee>;
};
};
eth0: ethernet@65000000 {

2
arch/arm/dts/uniphier-sld8.dtsi
View File

@ -67,6 +67,8 @@
compatible = "socionext,uniphier-scssi";
status = "disabled";
reg = <0x54006000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 39 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;

34
arch/arm/mach-uniphier/Kconfig
View File

@ -3,25 +3,16 @@ if ARCH_UNIPHIER
config SYS_CONFIG_NAME
default "uniphier"
config ARCH_UNIPHIER_32BIT
bool
choice
prompt "UniPhier SoC select"
config ARCH_UNIPHIER_V7_MULTI
bool "UniPhier V7 SoCs"
select ARCH_SUPPORT_PSCI
select ARMV7_NONSEC
select CPU_V7A
select CPU_V7_HAS_NONSEC
choice
prompt "UniPhier SoC select"
default ARCH_UNIPHIER_V7_MULTI
config ARCH_UNIPHIER_LD4_SLD8
bool "UniPhier LD4/sLD8 SoCs"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_V7_MULTI
bool "UniPhier Pro4/Pro5/PXs2/LD6b SoCs"
select ARCH_UNIPHIER_32BIT
config ARCH_UNIPHIER_V8_MULTI
bool "UniPhier V8 SoCs"
depends on !SPL
@ -32,32 +23,38 @@ endchoice
config ARCH_UNIPHIER_LD4
bool "Enable UniPhier LD4 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
depends on ARCH_UNIPHIER_V7_MULTI
depends on !SPL || SPL_TEXT_BASE = 0x00040000
default y
config ARCH_UNIPHIER_SLD8
bool "Enable UniPhier sLD8 SoC support"
depends on ARCH_UNIPHIER_LD4_SLD8
depends on ARCH_UNIPHIER_V7_MULTI
depends on !SPL || SPL_TEXT_BASE = 0x00040000
default y
config ARCH_UNIPHIER_PRO4
bool "Enable UniPhier Pro4 SoC support"
depends on ARCH_UNIPHIER_V7_MULTI
depends on !SPL || SPL_TEXT_BASE = 0x00100000
default y
config ARCH_UNIPHIER_PRO5
bool "Enable UniPhier Pro5 SoC support"
depends on ARCH_UNIPHIER_V7_MULTI
depends on !SPL || SPL_TEXT_BASE = 0x00100000
default y
config ARCH_UNIPHIER_PXS2
bool "Enable UniPhier Pxs2 SoC support"
depends on ARCH_UNIPHIER_V7_MULTI
depends on !SPL || SPL_TEXT_BASE = 0x00100000
default y
config ARCH_UNIPHIER_LD6B
bool "Enable UniPhier LD6b SoC support"
depends on ARCH_UNIPHIER_V7_MULTI
depends on !SPL || SPL_TEXT_BASE = 0x00100000
default y
config ARCH_UNIPHIER_LD11
@ -78,7 +75,7 @@ config ARCH_UNIPHIER_PXS3
config CACHE_UNIPHIER
bool "Enable the UniPhier L2 cache controller"
depends on ARCH_UNIPHIER_32BIT
depends on ARCH_UNIPHIER_V7_MULTI
default y
select SYS_CACHE_SHIFT_7
help
@ -86,6 +83,7 @@ config CACHE_UNIPHIER
config MICRO_SUPPORT_CARD
bool "Use Micro Support Card"
depends on UNIPHIER_SYSTEM_BUS
help
This option provides support for the expansion board, available
on some UniPhier reference boards.
@ -118,5 +116,5 @@ config CMD_DDRMPHY_DUMP
training; it is useful for the evaluation of DDR Multi PHY training.
config SYS_SOC
default "uniphier-v7" if ARCH_UNIPHIER_LD4_SLD8 || ARCH_UNIPHIER_V7_MULTI
default "uniphier-v7" if ARCH_UNIPHIER_V7_MULTI
endif

2
arch/arm/mach-uniphier/Makefile
View File

@ -22,12 +22,10 @@ endif
obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
obj-y += pinctrl-glue.o
obj-$(CONFIG_MMC) += mmc-first-dev.o
obj-$(CONFIG_NAND_DENALI) += nand-reset.o
obj-y += fdt-fixup.o
endif
obj-y += sbc/
obj-y += soc-info.o
obj-y += boot-device/
obj-y += clk/

1
arch/arm/mach-uniphier/arm64/Makefile
View File

@ -1,4 +1,3 @@
# SPDX-License-Identifier: GPL-2.0+
obj-y += mem_map.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += lowlevel_init.o

13
arch/arm/mach-uniphier/arm64/lowlevel_init.S
View File

@ -1,13 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Socionext Inc.
*/
#include <linux/linkage.h>
ENTRY(lowlevel_init)
/* LD20 needs the following code to boot. I do not know why. */
mrs x0, sctlr_el1
msr sctlr_el1, x0
ret
ENDPROC(lowlevel_init)

44
arch/arm/mach-uniphier/board_init.c
View File

@ -13,6 +13,33 @@
#include "micro-support-card.h"
#include "soc-info.h"
#define PC0CTRL 0x598000c0
#if defined(CONFIG_ARCH_UNIPHIER_LD4) || defined(CONFIG_ARCH_UNIPHIER_SLD8)
static void uniphier_ld4_sbc_init(void)
{
u32 tmp;
/* system bus output enable */
tmp = readl(PC0CTRL);
tmp &= 0xfffffcff;
writel(tmp, PC0CTRL);
}
#endif
#if defined(CONFIG_ARCH_UNIPHIER_PXS2) || \
defined(CONFIG_ARCH_UNIPHIER_LD6B) || \
defined(CONFIG_ARCH_UNIPHIER_LD11) || \
defined(CONFIG_ARCH_UNIPHIER_LD20) || \
defined(CONFIG_ARCH_UNIPHIER_PXS3)
static void uniphier_pxs2_sbc_init(void)
{
/* necessary for ROM boot ?? */
/* system bus output enable */
writel(0x17, PC0CTRL);
}
#endif
#ifdef CONFIG_ARCH_UNIPHIER_LD20
static void uniphier_ld20_misc_init(void)
{
@ -45,7 +72,6 @@ static const struct uniphier_initdata uniphier_initdata[] = {
#if defined(CONFIG_ARCH_UNIPHIER_PRO4)
{
.soc_id = UNIPHIER_PRO4_ID,
.sbc_init = uniphier_sbc_init_savepin,
.pll_init = uniphier_pro4_pll_init,
.clk_init = uniphier_pro4_clk_init,
},
@ -60,7 +86,6 @@ static const struct uniphier_initdata uniphier_initdata[] = {
#if defined(CONFIG_ARCH_UNIPHIER_PRO5)
{
.soc_id = UNIPHIER_PRO5_ID,
.sbc_init = uniphier_sbc_init_savepin,
.clk_init = uniphier_pro5_clk_init,
},
#endif
@ -81,7 +106,7 @@ static const struct uniphier_initdata uniphier_initdata[] = {
#if defined(CONFIG_ARCH_UNIPHIER_LD11)
{
.soc_id = UNIPHIER_LD11_ID,
.sbc_init = uniphier_ld11_sbc_init,
.sbc_init = uniphier_pxs2_sbc_init,
.pll_init = uniphier_ld11_pll_init,
.clk_init = uniphier_ld11_clk_init,
},
@ -89,7 +114,7 @@ static const struct uniphier_initdata uniphier_initdata[] = {
#if defined(CONFIG_ARCH_UNIPHIER_LD20)
{
.soc_id = UNIPHIER_LD20_ID,
.sbc_init = uniphier_ld11_sbc_init,
.sbc_init = uniphier_pxs2_sbc_init,
.pll_init = uniphier_ld20_pll_init,
.clk_init = uniphier_ld20_clk_init,
.misc_init = uniphier_ld20_misc_init,
@ -118,7 +143,8 @@ int board_init(void)
return -EINVAL;
}
initdata->sbc_init();
if (initdata->sbc_init)
initdata->sbc_init();
support_card_init();
@ -137,14 +163,6 @@ int board_init(void)
if (initdata->misc_init)
initdata->misc_init();
led_puts("U3");
support_card_late_init();
led_puts("U4");
uniphier_nand_reset_assert();
led_puts("Uboo");
return 0;

9
arch/arm/mach-uniphier/boot-device/boot-device.c
View File

@ -14,11 +14,18 @@
#include <linux/log2.h>
#include "../init.h"
#include "../sbc/sbc-regs.h"
#include "../sg-regs.h"
#include "../soc-info.h"
#include "boot-device.h"
#define SBBASE0 0x58c00100
#define SBBASE_BANK_ENABLE BIT(0)
static int uniphier_sbc_boot_is_swapped(void)
{
return !(readl(SBBASE0) & SBBASE_BANK_ENABLE);
}
struct uniphier_boot_device_info {
unsigned int soc_id;
unsigned int boot_device_sel_shift;

35
arch/arm/mach-uniphier/init.h
View File

@ -34,34 +34,6 @@ int uniphier_sld8_init(const struct uniphier_board_data *bd);
int uniphier_pro5_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_init(const struct uniphier_board_data *bd);
#if defined(CONFIG_MICRO_SUPPORT_CARD)
void uniphier_sbc_init_admulti(void);
void uniphier_sbc_init_savepin(void);
void uniphier_ld4_sbc_init(void);
void uniphier_pxs2_sbc_init(void);
void uniphier_ld11_sbc_init(void);
#else
static inline void uniphier_sbc_init_admulti(void)
{
}
static inline void uniphier_sbc_init_savepin(void)
{
}
static inline void uniphier_ld4_sbc_init(void)
{
}
static inline void uniphier_pxs2_sbc_init(void)
{
}
static inline void uniphier_ld11_sbc_init(void)
{
}
#endif
void uniphier_ld4_bcu_init(const struct uniphier_board_data *bd);
int uniphier_memconf_2ch_init(const struct uniphier_board_data *bd);
@ -103,13 +75,6 @@ int uniphier_have_internal_stm(void);
int uniphier_boot_from_backend(void);
int uniphier_pin_init(const char *pinconfig_name);
#ifdef CONFIG_NAND_DENALI
void uniphier_nand_reset_assert(void);
#else
static inline void uniphier_nand_reset_assert(void)
{
}
#endif
#ifdef CONFIG_ARM64
void uniphier_mem_map_init(unsigned long dram_base, unsigned long dram_size);
#else

110
arch/arm/mach-uniphier/micro-support-card.c
View File

@ -5,8 +5,7 @@
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <config.h>
#include <dm/of.h>
#include <dm.h>
#include <fdt_support.h>
#include <linux/ctype.h>
#include <linux/delay.h>
@ -91,6 +90,17 @@ static int support_card_show_revision(void)
void support_card_init(void)
{
struct udevice *dev;
int ret;
/* The system bus must be initialized for access to the support card. */
ret = uclass_get_device_by_driver(UCLASS_SIMPLE_BUS,
DM_GET_DRIVER(uniphier_system_bus_driver),
&dev);
if (ret)
return;
/* Check DT to see if this board has the support card. */
support_card_detect();
if (!support_card_found)
@ -107,102 +117,6 @@ void support_card_init(void)
support_card_show_revision();
}
#if defined(CONFIG_MTD_NOR_FLASH)
#include <mtd/cfi_flash.h>
struct memory_bank {
phys_addr_t base;
unsigned long size;
};
static int mem_is_flash(const struct memory_bank *mem)
{
const int loop = 128;
u32 *scratch_addr;
u32 saved_value;
int ret = 1;
int i;
/* just in case, use the tail of the memory bank */
scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
sizeof(u32) * loop, MAP_NOCACHE);
for (i = 0; i < loop; i++, scratch_addr++) {
saved_value = readl(scratch_addr);
writel(~saved_value, scratch_addr);
if (readl(scratch_addr) != saved_value) {
/* We assume no memory or SRAM here. */
writel(saved_value, scratch_addr);
ret = 0;
break;
}
}
unmap_physmem(scratch_addr, MAP_NOCACHE);
return ret;
}
/* {address, size} */
static const struct memory_bank memory_banks[] = {
{0x42000000, 0x01f00000},
};
static const struct memory_bank
*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
phys_addr_t cfi_flash_bank_addr(int i)
{
return flash_banks_list[i]->base;
}
unsigned long cfi_flash_bank_size(int i)
{
return flash_banks_list[i]->size;
}
static void detect_num_flash_banks(void)
{
const struct memory_bank *memory_bank, *end;
cfi_flash_num_flash_banks = 0;
memory_bank = memory_banks;
end = memory_bank + ARRAY_SIZE(memory_banks);
for (; memory_bank < end; memory_bank++) {
if (cfi_flash_num_flash_banks >=
CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
break;
if (mem_is_flash(memory_bank)) {
flash_banks_list[cfi_flash_num_flash_banks] =
memory_bank;
debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
(unsigned long)memory_bank->base,
(unsigned long)memory_bank->size);
cfi_flash_num_flash_banks++;
}
}
debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
}
#else /* CONFIG_MTD_NOR_FLASH */
static void detect_num_flash_banks(void)
{
};
#endif /* CONFIG_MTD_NOR_FLASH */
void support_card_late_init(void)
{
if (!support_card_found)
return;
detect_num_flash_banks();
}
static const u8 ledval_num[] = {
0x7e, /* 0 */
0x0c, /* 1 */

43
arch/arm/mach-uniphier/nand-reset.c
View File

@ -1,43 +0,0 @@
// SPDX-License-Identifier: GPL-2.0 or later
/*
* Copyright (C) 2020 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <linux/errno.h>
#include <dm.h>
#include <dm/uclass-internal.h>
#include <reset.h>
#include "init.h"
/*
* Assert the Denali NAND controller reset if found.
*
* On LD4, the bootstrap process starts running after power-on reset regardless
* of the boot mode, here the pin-mux is not necessarily set up for NAND, then
* the controller is stuck. Assert the controller reset here, and should be
* deasserted in the driver after the pin-mux is correctly handled. For other
* SoCs, the bootstrap runs only when the boot mode selects ONFi, but it is yet
* effective when the boot swap is on. So, the reset should be asserted anyway.
*/
void uniphier_nand_reset_assert(void)
{
struct udevice *dev;
struct reset_ctl_bulk resets;
int ret;
ret = uclass_find_first_device(UCLASS_MTD, &dev);
if (ret || !dev)
return;
/* make sure this is the Denali NAND controller */
if (strcmp(dev->driver->name, "denali-nand-dt"))
return;
ret = reset_get_bulk(dev, &resets);
if (ret)
return;
reset_assert_bulk(&resets);
}

15
arch/arm/mach-uniphier/sbc/Makefile
View File

@ -1,15 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
obj-y += sbc-boot.o
ifndef CONFIG_SPL_BUILD
obj-y += sbc.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += sbc-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += sbc-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS2) += sbc-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD6B) += sbc-pxs2.o
obj-$(CONFIG_ARCH_UNIPHIER_LD11) += sbc-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_LD20) += sbc-ld11.o
obj-$(CONFIG_ARCH_UNIPHIER_PXS3) += sbc-pxs2.o
endif

13
arch/arm/mach-uniphier/sbc/sbc-boot.c
View File

@ -1,13 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
//
// Copyright (C) 2011-2014 Panasonic Corporation
// Copyright (C) 2015-2019 Socionext Inc.
#include <linux/io.h>
#include "sbc-regs.h"
int uniphier_sbc_boot_is_swapped(void)
{
return !(readl(SBBASE0) & SBBASE_BANK_ENABLE);
}

26
arch/arm/mach-uniphier/sbc/sbc-ld11.c
View File

@ -1,26 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016-2017 Socionext Inc.
*/
#include <spl.h>
#include <linux/io.h>
#include "../init.h"
#include "sbc-regs.h"
void uniphier_ld11_sbc_init(void)
{
if (!uniphier_sbc_is_enabled())
return;
uniphier_sbc_init_savepin();
/* necessary for ROM boot ?? */
/* system bus output enable */
writel(0x17, PC0CTRL);
/* pins for NAND and System Bus are multiplexed */
if (spl_boot_device() != BOOT_DEVICE_NAND)
uniphier_pin_init("system-bus");
}

25
arch/arm/mach-uniphier/sbc/sbc-ld4.c
View File

@ -1,25 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015-2017 Socionext Inc.
*/
#include <linux/io.h>
#include "../init.h"
#include "sbc-regs.h"
void uniphier_ld4_sbc_init(void)
{
u32 tmp;
if (!uniphier_sbc_is_enabled())
return;
uniphier_sbc_init_savepin();
/* system bus output enable */
tmp = readl(PC0CTRL);
tmp &= 0xfffffcff;
writel(tmp, PC0CTRL);
}

23
arch/arm/mach-uniphier/sbc/sbc-pxs2.c
View File

@ -1,23 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016-2017 Socionext Inc.
*/
#include <linux/io.h>
#include "../init.h"
#include "sbc-regs.h"
void uniphier_pxs2_sbc_init(void)
{
if (!uniphier_sbc_is_enabled())
return;
uniphier_sbc_init_savepin();
/* necessary for ROM boot ?? */
/* system bus output enable */
writel(0x17, PC0CTRL);
uniphier_pin_init("system-bus"); /* PXs3 */
}

82
arch/arm/mach-uniphier/sbc/sbc-regs.h
View File

@ -1,82 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* UniPhier SBC (System Bus Controller) registers
*
* Copyright (C) 2011-2014 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
*/
#ifndef ARCH_SBC_REGS_H
#define ARCH_SBC_REGS_H
#define SBBASE_BASE 0x58c00100
#define SBBASE(x) (SBBASE_BASE + (x) * 0x10)
#define SBBASE0 (SBBASE(0))
#define SBBASE1 (SBBASE(1))
#define SBBASE2 (SBBASE(2))
#define SBBASE3 (SBBASE(3))
#define SBBASE4 (SBBASE(4))
#define SBBASE5 (SBBASE(5))
#define SBBASE6 (SBBASE(6))
#define SBBASE7 (SBBASE(7))
#define SBBASE_BANK_ENABLE (0x00000001)
#define SBCTRL_BASE 0x58c00200
#define SBCTRL(x, y) (SBCTRL_BASE + (x) * 0x10 + (y) * 4)
#define SBCTRL00 SBCTRL(0, 0)
#define SBCTRL01 SBCTRL(0, 1)
#define SBCTRL02 SBCTRL(0, 2)
#define SBCTRL03 SBCTRL(0, 3)
#define SBCTRL04 (SBCTRL_BASE + 0x100)
#define SBCTRL10 SBCTRL(1, 0)
#define SBCTRL11 SBCTRL(1, 1)
#define SBCTRL12 SBCTRL(1, 2)
#define SBCTRL13 SBCTRL(1, 3)
#define SBCTRL14 (SBCTRL_BASE + 0x110)
#define SBCTRL20 SBCTRL(2, 0)
#define SBCTRL21 SBCTRL(2, 1)
#define SBCTRL22 SBCTRL(2, 2)
#define SBCTRL23 SBCTRL(2, 3)
#define SBCTRL24 (SBCTRL_BASE + 0x120)
#define SBCTRL30 SBCTRL(3, 0)
#define SBCTRL31 SBCTRL(3, 1)
#define SBCTRL32 SBCTRL(3, 2)
#define SBCTRL33 SBCTRL(3, 3)
#define SBCTRL34 (SBCTRL_BASE + 0x130)
#define SBCTRL40 SBCTRL(4, 0)
#define SBCTRL41 SBCTRL(4, 1)
#define SBCTRL42 SBCTRL(4, 2)
#define SBCTRL43 SBCTRL(4, 3)
#define SBCTRL44 (SBCTRL_BASE + 0x140)
#define SBCTRL50 SBCTRL(5, 0)
#define SBCTRL51 SBCTRL(5, 1)
#define SBCTRL52 SBCTRL(5, 2)
#define SBCTRL53 SBCTRL(5, 3)
#define SBCTRL54 (SBCTRL_BASE + 0x150)
#define SBCTRL60 SBCTRL(6, 0)
#define SBCTRL61 SBCTRL(6, 1)
#define SBCTRL62 SBCTRL(6, 2)
#define SBCTRL63 SBCTRL(6, 3)
#define SBCTRL64 (SBCTRL_BASE + 0x160)
#define SBCTRL70 SBCTRL(7, 0)
#define SBCTRL71 SBCTRL(7, 1)
#define SBCTRL72 SBCTRL(7, 2)
#define SBCTRL73 SBCTRL(7, 3)
#define SBCTRL74 (SBCTRL_BASE + 0x170)
#define PC0CTRL 0x598000c0
int uniphier_sbc_boot_is_swapped(void);
int uniphier_sbc_is_enabled(void);
#endif /* ARCH_SBC_REGS_H */

95
arch/arm/mach-uniphier/sbc/sbc.c
View File

@ -1,95 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Copyright (C) 2015-2017 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <linux/io.h>
#include <asm/global_data.h>
#include "../init.h"
#include "sbc-regs.h"
#define SBCTRL0_ADMULTIPLX_PERI_VALUE 0x33120000
#define SBCTRL1_ADMULTIPLX_PERI_VALUE 0x03005500
#define SBCTRL2_ADMULTIPLX_PERI_VALUE 0x14000020
#define SBCTRL0_ADMULTIPLX_MEM_VALUE 0x33120000
#define SBCTRL1_ADMULTIPLX_MEM_VALUE 0x03005500
#define SBCTRL2_ADMULTIPLX_MEM_VALUE 0x14000010
/* slower but LED works */
#define SBCTRL0_SAVEPIN_PERI_VALUE 0x55450000
#define SBCTRL1_SAVEPIN_PERI_VALUE 0x07168d00
#define SBCTRL2_SAVEPIN_PERI_VALUE 0x34000009
#define SBCTRL4_SAVEPIN_PERI_VALUE 0x02110110
/* faster but LED does not work */
#define SBCTRL0_SAVEPIN_MEM_VALUE 0x55450000
#define SBCTRL1_SAVEPIN_MEM_VALUE 0x06057700
/* NOR flash needs more wait counts than SRAM */
#define SBCTRL2_SAVEPIN_MEM_VALUE 0x34000009
#define SBCTRL4_SAVEPIN_MEM_VALUE 0x02110210
int uniphier_sbc_is_enabled(void)
{
DECLARE_GLOBAL_DATA_PTR;
const void *fdt = gd->fdt_blob;
int offset;
offset = fdt_node_offset_by_compatible(fdt, 0,
"socionext,uniphier-system-bus");
if (offset < 0)
return 0;
return fdtdec_get_is_enabled(fdt, offset);
}
static void __uniphier_sbc_init(int savepin)
{
/*
* Only CS1 is connected to support card.
* BKSZ[1:0] should be set to "01".
*/
if (savepin) {
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11);
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
} else {
writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10);
writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11);
writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12);
}
if (uniphier_sbc_boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
* 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
* 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
} else {
/*
* Boot Swap Off: boot from mask ROM
* 0x40000000-0x41ffffff: mask ROM
* 0x42000000-0x43efffff: memory bank (31MB)
* 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, SBBASE0); /* dummy */
writel(0x0200be01, SBBASE1);
}
}
void uniphier_sbc_init_admulti(void)
{
__uniphier_sbc_init(0);
}
void uniphier_sbc_init_savepin(void)
{
__uniphier_sbc_init(1);
}

4
configs/uniphier_ld4_sld8_defconfig
View File

@ -8,7 +8,6 @@ CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=3
CONFIG_SPL=y
CONFIG_ARCH_UNIPHIER_LD4_SLD8=y
CONFIG_MICRO_SUPPORT_CARD=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
@ -18,7 +17,6 @@ CONFIG_LOGLEVEL=6
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
@ -45,8 +43,6 @@ CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MTD=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_SPL_NAND_DENALI=y

3
configs/uniphier_v7_defconfig
View File

@ -17,7 +17,6 @@ CONFIG_LOGLEVEL=6
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
@ -45,8 +44,6 @@ CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_UNIPHIER=y
CONFIG_MTD=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_SPL_NAND_DENALI=y

3
configs/uniphier_v8_defconfig
View File

@ -14,7 +14,6 @@ CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="env exist ${bootdev}preboot && run ${bootdev}preboot"
CONFIG_LOGLEVEL=6
CONFIG_CMD_CONFIG=y
CONFIG_CMD_IMLS=y
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
@ -45,8 +44,6 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ADMA=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MTD=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_DENALI_DT=y
CONFIG_SNI_AVE=y

2
drivers/Kconfig
View File

@ -10,6 +10,8 @@ source "drivers/ata/Kconfig"
source "drivers/axi/Kconfig"
source "drivers/bus/Kconfig"
source "drivers/block/Kconfig"
source "drivers/bootcount/Kconfig"

1
drivers/Makefile
View File

@ -74,6 +74,7 @@ ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
obj-y += adc/
obj-y += ata/
obj-y += bus/
obj-$(CONFIG_DM_DEMO) += demo/
obj-$(CONFIG_BIOSEMU) += bios_emulator/
obj-y += block/

16
drivers/bus/Kconfig Normal file
View File

@ -0,0 +1,16 @@
# SPDX-License-Identifier: GPL-2.0
#
# Bus Devices
#
menu "Bus devices"
config UNIPHIER_SYSTEM_BUS
bool "UniPhier System Bus driver"
depends on ARCH_UNIPHIER
default y
help
Support for UniPhier System Bus, a simple external bus. This is
needed to use on-board devices connected to UniPhier SoCs.
endmenu

6
drivers/bus/Makefile Normal file
View File

@ -0,0 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the bus drivers.
#
obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o

100
drivers/bus/uniphier-system-bus.c Normal file
View File

@ -0,0 +1,100 @@
// SPDX-License-Identifier: GPL-2.0-or-later
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/sizes.h>
#include <linux/types.h>
#include <dm.h>
/* System Bus Controller registers */
#define UNIPHIER_SBC_BASE 0x100 /* base address of bank0 space */
#define UNIPHIER_SBC_BASE_BE BIT(0) /* bank_enable */
#define UNIPHIER_SBC_CTRL0 0x200 /* timing parameter 0 of bank0 */
#define UNIPHIER_SBC_CTRL1 0x204 /* timing parameter 1 of bank0 */
#define UNIPHIER_SBC_CTRL2 0x208 /* timing parameter 2 of bank0 */
#define UNIPHIER_SBC_CTRL3 0x20c /* timing parameter 3 of bank0 */
#define UNIPHIER_SBC_CTRL4 0x300 /* timing parameter 4 of bank0 */
#define UNIPHIER_SBC_STRIDE 0x10 /* register stride to next bank */
#if 1
/* slower but LED works */
#define SBCTRL0_VALUE 0x55450000
#define SBCTRL1_VALUE 0x07168d00
#define SBCTRL2_VALUE 0x34000009
#define SBCTRL4_VALUE 0x02110110
#else
/* faster but LED does not work */
#define SBCTRL0_VALUE 0x55450000
#define SBCTRL1_VALUE 0x06057700
/* NOR flash needs more wait counts than SRAM */
#define SBCTRL2_VALUE 0x34000009
#define SBCTRL4_VALUE 0x02110210
#endif
void uniphier_system_bus_set_reg(void __iomem *membase)
{
void __iomem *bank0_base = membase;
void __iomem *bank1_base = membase + UNIPHIER_SBC_STRIDE;
/*
* Only CS1 is connected to support card.
* BKSZ[1:0] should be set to "01".
*/
writel(SBCTRL0_VALUE, bank1_base + UNIPHIER_SBC_CTRL0);
writel(SBCTRL1_VALUE, bank1_base + UNIPHIER_SBC_CTRL1);
writel(SBCTRL2_VALUE, bank1_base + UNIPHIER_SBC_CTRL2);
writel(SBCTRL4_VALUE, bank1_base + UNIPHIER_SBC_CTRL4);
if (readl(bank1_base + UNIPHIER_SBC_BASE) & UNIPHIER_SBC_BASE_BE) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff.
*
* 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank
* 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals
*/
writel(0x0000bc01, bank0_base + UNIPHIER_SBC_BASE);
} else {
/*
* Boot Swap Off: boot from mask ROM
* 0x40000000-0x41ffffff: mask ROM
* 0x42000000-0x43efffff: memory bank (31MB)
* 0x43f00000-0x43ffffff: peripherals (1MB)
*/
writel(0x0000be01, bank0_base + UNIPHIER_SBC_BASE); /* dummy */
writel(0x0200be01, bank0_base + UNIPHIER_SBC_BASE);
}
}
static int uniphier_system_bus_probe(struct udevice *dev)
{
fdt_addr_t base;
void __iomem *membase;
base = dev_read_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
membase = devm_ioremap(dev, base, SZ_1K);
if (!membase)
return -ENOMEM;
uniphier_system_bus_set_reg(membase);
return 0;
}
static const struct udevice_id uniphier_system_bus_match[] = {
{ .compatible = "socionext,uniphier-system-bus" },
{ /* sentinel */ }
};
U_BOOT_DRIVER(uniphier_system_bus_driver) = {
.name = "uniphier-system-bus",
.id = UCLASS_SIMPLE_BUS,
.of_match = uniphier_system_bus_match,
.probe = uniphier_system_bus_probe,
};

11
drivers/mtd/nand/raw/denali.c
View File

@ -1220,6 +1220,17 @@ static int denali_multidev_fixup(struct denali_nand_info *denali)
return 0;
}
int denali_wait_reset_complete(struct denali_nand_info *denali)
{
u32 irq_status;
irq_status = denali_wait_for_irq(denali, INTR__RST_COMP);
if (!(irq_status & INTR__RST_COMP))
return -EIO;
return 0;
}
int denali_init(struct denali_nand_info *denali)
{
struct nand_chip *chip = &denali->nand;

1
drivers/mtd/nand/raw/denali.h
View File

@ -321,6 +321,7 @@ struct denali_nand_info {
#define DENALI_CAP_DMA_64BIT BIT(1)
int denali_calc_ecc_bytes(int step_size, int strength);
int denali_wait_reset_complete(struct denali_nand_info *denali);
int denali_init(struct denali_nand_info *denali);
#endif /* __DENALI_H__ */

8
drivers/mtd/nand/raw/denali_dt.c
View File

@ -148,6 +148,8 @@ static int denali_dt_probe(struct udevice *dev)
if (ret) {
dev_warn(dev, "Can't get reset: %d\n", ret);
} else {
reset_assert_bulk(&resets);
udelay(2);
reset_deassert_bulk(&resets);
/*
@ -155,7 +157,11 @@ static int denali_dt_probe(struct udevice *dev)
* kicked (bootstrap process). The driver must wait until it is
* finished. Otherwise, it will result in unpredictable behavior.
*/
udelay(200);
ret = denali_wait_reset_complete(denali);
if (ret) {
dev_err(denali->dev, "reset not completed.\n");
return ret;
}
}
return denali_init(denali);

90
drivers/serial/serial_uniphier.c
View File

@ -7,6 +7,8 @@
#include <common.h>
#include <dm.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/io.h>
#include <linux/serial_reg.h>
@ -15,77 +17,72 @@
#include <serial.h>
#include <fdtdec.h>
/*
* Note: Register map is slightly different from that of 16550.
*/
struct uniphier_serial {
u32 rx; /* In: Receive buffer */
#define tx rx /* Out: Transmit buffer */
u32 ier; /* Interrupt Enable Register */
u32 iir; /* In: Interrupt ID Register */
u32 char_fcr; /* Charactor / FIFO Control Register */
u32 lcr_mcr; /* Line/Modem Control Register */
#define LCR_SHIFT 8
#define LCR_MASK (0xff << (LCR_SHIFT))
u32 lsr; /* In: Line Status Register */
u32 msr; /* In: Modem Status Register */
u32 __rsv0;
u32 __rsv1;
u32 dlr; /* Divisor Latch Register */
};
#define UNIPHIER_UART_REGSHIFT 2
#define UNIPHIER_UART_RX (0 << (UNIPHIER_UART_REGSHIFT))
#define UNIPHIER_UART_TX UNIPHIER_UART_RX
/* bit[15:8] = CHAR, bit[7:0] = FCR */
#define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT))
#define UNIPHIER_UART_FCR_MASK GENMASK(7, 0)
/* bit[15:8] = LCR, bit[7:0] = MCR */
#define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT))
#define UNIPHIER_UART_LCR_MASK GENMASK(15, 8)
#define UNIPHIER_UART_LSR (5 << (UNIPHIER_UART_REGSHIFT))
/* Divisor Latch Register */
#define UNIPHIER_UART_DLR (9 << (UNIPHIER_UART_REGSHIFT))
struct uniphier_serial_priv {
struct uniphier_serial __iomem *membase;
void __iomem *membase;
unsigned int uartclk;
};
#define uniphier_serial_port(dev) \
((struct uniphier_serial_priv *)dev_get_priv(dev))->membase
static int uniphier_serial_setbrg(struct udevice *dev, int baudrate)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
const unsigned int mode_x_div = 16;
static const unsigned int mode_x_div = 16;
unsigned int divisor;
divisor = DIV_ROUND_CLOSEST(priv->uartclk, mode_x_div * baudrate);
writel(divisor, &port->dlr);
/* flush the trasmitter before changing hw setting */
while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT))
;
writel(divisor, priv->membase + UNIPHIER_UART_DLR);
return 0;
}
static int uniphier_serial_getc(struct udevice *dev)
{
struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
struct uniphier_serial_priv *priv = dev_get_priv(dev);
if (!(readl(&port->lsr) & UART_LSR_DR))
if (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_DR))
return -EAGAIN;
return readl(&port->rx);
return readl(priv->membase + UNIPHIER_UART_RX);
}
static int uniphier_serial_putc(struct udevice *dev, const char c)
{
struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
struct uniphier_serial_priv *priv = dev_get_priv(dev);
if (!(readl(&port->lsr) & UART_LSR_THRE))
if (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_THRE))
return -EAGAIN;
writel(c, &port->tx);
writel(c, priv->membase + UNIPHIER_UART_TX);
return 0;
}
static int uniphier_serial_pending(struct udevice *dev, bool input)
{
struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
struct uniphier_serial_priv *priv = dev_get_priv(dev);
if (input)
return readl(&port->lsr) & UART_LSR_DR;
return readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_DR;
else
return !(readl(&port->lsr) & UART_LSR_THRE);
return !(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_THRE);
}
/*
@ -113,7 +110,6 @@ static const struct uniphier_serial_clk_data uniphier_serial_clk_data[] = {
static int uniphier_serial_probe(struct udevice *dev)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
struct uniphier_serial __iomem *port;
const struct uniphier_serial_clk_data *clk_data;
ofnode root_node;
fdt_addr_t base;
@ -123,12 +119,10 @@ static int uniphier_serial_probe(struct udevice *dev)
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
port = devm_ioremap(dev, base, SZ_64);
if (!port)
priv->membase = devm_ioremap(dev, base, SZ_64);
if (!priv->membase)
return -ENOMEM;
priv->membase = port;
root_node = ofnode_path("/");
clk_data = uniphier_serial_clk_data;
while (clk_data->compatible) {
@ -143,10 +137,20 @@ static int uniphier_serial_probe(struct udevice *dev)
priv->uartclk = clk_data->clk_rate;
tmp = readl(&port->lcr_mcr);
tmp &= ~LCR_MASK;
tmp |= UART_LCR_WLEN8 << LCR_SHIFT;
writel(tmp, &port->lcr_mcr);
/* flush the trasmitter empty before changing hw setting */
while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT))
;
/* enable FIFO */
tmp = readl(priv->membase + UNIPHIER_UART_CHAR_FCR);
tmp &= ~UNIPHIER_UART_FCR_MASK;
tmp |= FIELD_PREP(UNIPHIER_UART_FCR_MASK, UART_FCR_ENABLE_FIFO);
writel(tmp, priv->membase + UNIPHIER_UART_CHAR_FCR);
tmp = readl(priv->membase + UNIPHIER_UART_LCR_MCR);
tmp &= ~UNIPHIER_UART_LCR_MASK;
tmp |= FIELD_PREP(UNIPHIER_UART_LCR_MASK, UART_LCR_WLEN8);
writel(tmp, priv->membase + UNIPHIER_UART_LCR_MCR);
return 0;
}

24
include/configs/uniphier.h
View File

@ -41,32 +41,12 @@
#define CONFIG_ARMV7_PSCI_1_0
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_TIMESTAMP
/* FLASH related */
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_MONITOR_BASE 0
#define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */
#define CONFIG_SYS_FLASH_BASE 0
/*
* flash_toggle does not work for our support card.
* We need to use flash_status_poll.
*/
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
/* serial console configuration */
#define CONFIG_SYS_MONITOR_LEN 0x00200000 /* 2MB */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
/* Boot Argument Buffer Size */
@ -221,7 +201,7 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */
#define CONFIG_SPL_STACK (0x00200000)
#define CONFIG_SPL_STACK (0x00100000)
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000