From 5d5bd838f76eade22c0ea40a500389f924d0da36 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 5 Jun 2008 13:12:01 +0200 Subject: [PATCH] TQM85xx: Fix CPM port pin configuration Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used as serial interface anyway. Worse, on some board variants configuring the pins for SCC1 leads to short circuits (for example on the TQM8541-BG). Signed-off-by: Martin Krause --- board/tqc/tqm85xx/tqm85xx.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 31364d3fcf..af8c170b36 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -165,9 +165,15 @@ const iop_conf_t iop_conf_tab[4][32] = { /* Port D: conf, ppar, psor, pdir, podr, pdat */ { +#ifdef CONFIG_TQM8560 {1, 1, 0, 0, 0, 0}, /* PD31: SCC1 EN RxD */ {1, 1, 1, 1, 0, 0}, /* PD30: SCC1 EN TxD */ {1, 1, 0, 1, 0, 0}, /* PD29: SCC1 EN TENA */ +#else /* !CONFIG_TQM8560 */ + {0, 0, 0, 0, 0, 0}, /* PD31: PD31 */ + {0, 0, 0, 0, 0, 0}, /* PD30: PD30 */ + {0, 0, 0, 0, 0, 0}, /* PD29: PD29 */ +#endif /* CONFIG_TQM8560 */ {1, 1, 0, 0, 0, 0}, /* PD28: PD28 */ {1, 1, 0, 1, 0, 0}, /* PD27: PD27 */ {1, 1, 0, 1, 0, 0}, /* PD26: PD26 */