From 5c2f444c9b061dcc4e7d9988c2cacf64bb4be4e8 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 23 Feb 2013 02:42:57 +0000 Subject: [PATCH] mxs: Reset the EMI block on mx23 The real reason for memory instability was the fact that the EMI block was gated and not reset throughout the boards' operation. This patch resets the EMI block properly while also reverts the memory voltage bump. The memory stability issues were caused by the EMI not being reset properly and thus there is no longer need to run the memory at higher voltage than it ought to run at. This partly reverts 8303ed128a55519f19c5f11087032d4bc4e0537a . Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Otavio Salvador Cc: Stefano Babic --- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index f8392f6398..4a0a5aac7c 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include "mxs_init.h" @@ -229,7 +230,7 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_ILIMIT | POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_PULLDOWN_ACTIVE, @@ -237,13 +238,20 @@ static void mx23_mem_setup_vddmem(void) early_delay(10000); - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_LINREG, &power_regs->hw_power_vddmemctrl); } static void mx23_mem_init(void) { + /* + * Reset/ungate the EMI block. This is essential, otherwise the system + * suffers from memory instability. This thing is mx23 specific and is + * no longer present on mx28. + */ + mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE); + mx23_mem_setup_vddmem(); /*