imx: Kconfig: Reduce default CONFIG_CSF_SIZE

The default CSF_SIZE defined in Kconfig is too high and SPL cannot
fit into the OCRAM in certain cases.

The CSF cannot achieve 0x2000 length when using RSA 4K key which is
the largest key size supported by HABv4.

According to AN12056 "Encrypted Boot on HABv4 and CAAM Enabled Devices"
it's recommended to pad CSF binary to 0x2000 and append DEK blob to
deploy encrypted boot images.

As the maximum DEK blob size is 0x58 we can reduce CSF_SIZE to 0x2060
which should cover both CSF and DEK blob length.

Update default_image.c and image.c to align with this change and avoid
a U-Boot proper authentication failure in HAB closed devices:

Authenticate image from DDR location 0x877fffc0...
bad magic magic=0x32 length=0x6131 version=0x38
bad length magic=0x32 length=0x6131 version=0x38
bad version magic=0x32 length=0x6131 version=0x38
spl: ERROR:  image authentication fail

Fixes: 96d27fb218 (Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets")

Reported-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
This commit is contained in:
Breno Matheus Lima 2019-09-23 18:39:47 +00:00 committed by Stefano Babic
parent 2845f86d95
commit 5b20d141f2
3 changed files with 9 additions and 5 deletions

View File

@ -45,7 +45,7 @@ config SECURE_BOOT
config CSF_SIZE
hex "Maximum size for Command Sequence File (CSF) binary"
default 0x4000
default 0x2060
help
Define the maximum size for Command Sequence File (CSF) binary
this information is used to define the image boot data.

View File

@ -61,6 +61,7 @@ static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch,
#endif /* !USE_HOSTCC*/
#include <u-boot/crc.h>
#include <imximage.h>
#ifndef CONFIG_SYS_BARGSIZE
#define CONFIG_SYS_BARGSIZE 512
@ -378,9 +379,9 @@ void image_print_contents(const void *ptr)
}
} else if (image_check_type(hdr, IH_TYPE_FIRMWARE_IVT)) {
printf("HAB Blocks: 0x%08x 0x0000 0x%08x\n",
image_get_load(hdr) - image_get_header_size(),
image_get_size(hdr) + image_get_header_size()
- 0x1FE0);
image_get_load(hdr) - image_get_header_size(),
(int)(image_get_size(hdr) + image_get_header_size()
+ sizeof(flash_header_v2_t) - 0x2060));
}
}

View File

@ -19,6 +19,7 @@
#include <image.h>
#include <tee/optee.h>
#include <u-boot/crc.h>
#include <imximage.h>
static image_header_t header;
@ -106,7 +107,9 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
if (params->type == IH_TYPE_FIRMWARE_IVT)
/* Add size of CSF minus IVT */
imagesize = sbuf->st_size - sizeof(image_header_t) + 0x1FE0;
imagesize = sbuf->st_size - sizeof(image_header_t)
+ 0x2060 - sizeof(flash_header_v2_t);
else
imagesize = sbuf->st_size - sizeof(image_header_t);