brain-hackers_pepepper-mirror
/
u-boot-brain
mirror of https://github.com/brain-hackers/u-boot-brain
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

board: atmel: sama5d2_icp: add periph reset in SPL hw init 

Some periphs on the board need to be reset by holding their reset GPIO down
for a specific time period.
On a warm reset, the periphs are not being reset by any reset pin and may be
in a wrong state.
Reset them in the SPL to make sure we are booting into the correct state
machine of the specific board periphs (KSZ eth switch, USB hub, HSIC eth,
Ethercat)

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
This commit is contained in:
Eugen Hristev 2019-05-03 15:56:44 +03:00
parent 0c8baa619d
commit 57fbd36c66
1 changed files with 23 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
board/atmel/sama5d2_icp/sama5d2_icp.c
View File

@ -73,6 +73,23 @@ int misc_init_r(void)
/* SPL */
#ifdef CONFIG_SPL_BUILD
/* deassert reset lines for external periph in case of warm reboot */
static void board_reset_additional_periph(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 16, 0); /* LAN9252_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 2, 0); /* HSIC_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 17, 0); /* USB2534_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTD, 4, 0); /* KSZ8563_RST */
}
static void board_start_additional_periph(void)
{
atmel_pio4_set_pio_output(AT91_PIO_PORTB, 16, 1); /* LAN9252_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 2, 1); /* HSIC_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTC, 17, 1); /* USB2534_RST */
atmel_pio4_set_pio_output(AT91_PIO_PORTD, 4, 1); /* KSZ8563_RST */
}
#ifdef CONFIG_SD_BOOT
void spl_mmc_init(void)
{
@ -93,12 +110,18 @@ void spl_board_init(void)
#ifdef CONFIG_SD_BOOT
spl_mmc_init();
#endif
board_reset_additional_periph();
}
void spl_display_print(void)
{
}
void spl_board_prepare_for_boot(void)
{
board_start_additional_periph();
}
static void ddrc_conf(struct atmel_mpddrc_config *ddrc)
{
ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM);