lpc32xx: cpu: add support for soft reset

Add support for optional soft reset (i.e. "RESOUT_N" not asserted during reset).

To be compatible with the original U-Boot code, when the "addr" parameter is 0, a hard is performed; for any other values, a soft reset is done.

Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
This commit is contained in:
Sylvain Lemieux 2015-07-27 13:37:35 -04:00 committed by Tom Rini
parent d75b532a9e
commit 576007aec9

View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
* Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@ -20,12 +20,23 @@ void reset_cpu(ulong addr)
/* Enable watchdog clock */
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
/* Reset pulse length is 13005 peripheral clock frames */
writel(13000, &wdt->pulse);
/* To be compatible with the original U-Boot code:
* addr: - 0: perform hard reset.
* - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */
if (addr == 0) {
/* Reset pulse length is 13005 peripheral clock frames */
writel(13000, &wdt->pulse);
/* Force WDOG_RESET2 and RESOUT_N signal active */
writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
&wdt->mctrl);
/* Force WDOG_RESET2 and RESOUT_N signal active */
writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1
| WDTIM_MCTRL_M_RES2, &wdt->mctrl);
} else {
/* Force match output active */
writel(0x01, &wdt->emr);
/* Internal reset on match output (no pulse on "RESOUT_N") */
writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl);
}
while (1)
/* NOP */;