freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name

Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-07 16:11:32 +00:00 · 2019-11-07 16:11:32 +00:00 · 5536c3c9d0
parent 56e6f810b0
commit 5536c3c9d0
46 changed files with 57 additions and 57 deletions
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@ -50,8 +50,8 @@ config MAX_CPUS
 	  cores, count the reserved ports. This will allocate enough memory
 	  in spin table to properly handle all cores.

-config SECURE_BOOT
-	bool	"Secure Boot"
+config NXP_ESBC
+	bool	"NXP_ESBC"
 	help
 		Enable Freescale Secure Boot feature. Normally selected
 		by defconfig. If unsure, do not change.
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@ -376,8 +376,8 @@ config EMC2305
 	 Enable the EMC2305 fan controller for configuration of fan
 	 speed.

-config SECURE_BOOT
-	bool "Secure Boot"
+config NXP_ESBC
+	bool "NXP_ESBC"
 	help
 		Enable Freescale Secure Boot feature

--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@ -34,7 +34,7 @@ u32 spl_boot_device(void)

 void spl_board_init(void)
 {
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_LSCH2)
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_LSCH2)
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@ -1,5 +1,5 @@
 config CHAIN_OF_TRUST
-	depends on !FIT_SIGNATURE && SECURE_BOOT
+	depends on !FIT_SIGNATURE && NXP_ESBC
 	imply CMD_BLOB
 	imply CMD_HASH if ARM
 	select FSL_CAAM
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@ -75,7 +75,7 @@ obj-$(CONFIG_TARGET_P5040DS)	+= p_corenet/

 obj-$(CONFIG_LAYERSCAPE_NS_ACCESS)	+= ns_access.o

-ifdef CONFIG_SECURE_BOOT
+ifdef CONFIG_NXP_ESBC
 obj-$(CONFIG_CMD_ESBC_VALIDATE) += fsl_validate.o cmd_esbc_validate.o
 endif
 obj-$(CONFIG_CHAIN_OF_TRUST) += fsl_chain_of_trust.o
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@ -196,7 +196,7 @@ int board_init(void)
 	init_final_memctl_regs();
 #endif

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/* In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
 	 * SMMU must be reset in bypass mode.
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@ -126,7 +126,7 @@ int checkboard(void)

 int board_init(void)
 {
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@ -407,7 +407,7 @@ int board_init(void)
 	ppa_init();
 #endif

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
--- a/board/freescale/ls1046ardb/ls1046ardb.c
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@ -69,7 +69,7 @@ int board_init(void)
 {
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
--- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1012AFRWY=y
 CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_AHCI=y
--- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1012AFRWY=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
--- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1012AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1012ARDB=y
 CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1012ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_F is not set
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1028ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1043AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_DISTRO_DEFAULTS=y
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1043ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_AHCI=y
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_TARGET_LS1046ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
 CONFIG_SYS_TEXT_BASE=0x20100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS1088ARDB=y
 CONFIG_SYS_TEXT_BASE=0x80400000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS1088ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/ls2080aqds_SECURE_BOOT_defconfig
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_AHCI=y
--- a/configs/ls2080ardb_SECURE_BOOT_defconfig
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_AHCI=y
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SYS_TEXT_BASE=0x20100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LS2080ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LX2160AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@ -3,7 +3,7 @@ CONFIG_TARGET_LX2160ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_EMC2305=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@ -66,13 +66,13 @@
 	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 #endif

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 /*
 * HDR would be appended at end of image and copied to DDR along
 * with U-Boot image.
 */
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */

 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@ -192,7 +192,7 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #include <asm/fsl_secure_boot.h>
 #endif

--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@ -74,7 +74,7 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
 * HDR would be appended at end of image and copied to DDR along
@ -85,7 +85,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN		0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif

 /* NAND SPL */
@ -100,9 +100,9 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */

 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@ -73,7 +73,7 @@
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
 * HDR would be appended at end of image and copied to DDR along
@ -84,7 +84,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN		0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif

 #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@ -235,7 +235,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000

-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*
 * HDR would be appended at end of image and copied to DDR along
@ -246,7 +246,7 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */

 #endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@ -407,7 +407,7 @@ unsigned long get_board_ddr_clk(void);
 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)

 /* Initial environment variables */
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
@ -426,7 +426,7 @@ unsigned long get_board_ddr_clk(void);
 	"sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"	\
 	"fsl_mc start mc 0xa0a00000 0xa0e00000\0"			\
 	"mcmemsize=0x70000000 \0"
-#else /* if !(CONFIG_SECURE_BOOT) */
+#else /* if !(CONFIG_NXP_ESBC) */
 #ifdef CONFIG_TFABOOT
 #define QSPI_MC_INIT_CMD				\
 	"sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
@ -522,7 +522,7 @@ unsigned long get_board_ddr_clk(void);
 	"mcmemsize=0x70000000 \0"
 #endif
 #endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */

 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@ -352,7 +352,7 @@ unsigned long get_board_ddr_clk(void);

 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"loadaddr=0x80100000\0"			\
@ -442,7 +442,7 @@ unsigned long get_board_ddr_clk(void);
 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
 	" 0x580e00000 \0"
 #endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */

 #ifdef CONFIG_TFABOOT
 #define SD_BOOTCOMMAND						\