brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-11 21:56:21 +09:00
Code Issues Projects Releases Wiki Activity

omap4: IO settings

Browse Source 
Tuning some IO settings for better performance and power.
And consolidate all such IO settings at one place.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
This commit is contained in:
Aneesh V 2011-09-08 11:05:56 -04:00 committed by Albert ARIBAUD
parent 025bc4254b
commit 4ecfcfaa9e
4 changed files with 105 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
arch/arm/cpu/armv7/omap4/board.c
View File

@ -70,6 +70,67 @@ u32 omap_boot_mode(void)
{
return omap4_boot_mode;
}
/*
* Some tuning of IOs for optimal power and performance
*/
static void do_io_settings(void)
{
u32 lpddr2io;
struct control_lpddr2io_regs *lpddr2io_regs =
(struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
struct omap4_sys_ctrl_regs *const ctrl =
(struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
u32 omap4_rev = omap_revision();
if (omap4_rev == OMAP4430_ES1_0)
lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
else if (omap4_rev == OMAP4430_ES2_0)
lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
else
lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
/* EMIF1 */
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
&lpddr2io_regs->control_lpddr2io1_2);
writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
/* EMIF2 */
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
/* No pull for GR10 as per hw team's recommendation */
writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
&lpddr2io_regs->control_lpddr2io2_2);
writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
/*
* Some of these settings (TRIM values) come from eFuse and are
* in turn programmed in the eFuse at manufacturing time after
* calibration of the device. Do the software over-ride only if
* the device is not correctly trimmed
*/
if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
&ctrl->control_ldosram_iva_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
&ctrl->control_ldosram_mpu_voltage_ctrl);
writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
&ctrl->control_ldosram_core_voltage_ctrl);
}
if (!readl(&ctrl->control_efuse_1))
writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
if (!readl(&ctrl->control_efuse_2))
writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
}
#endif
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
@ -197,6 +258,7 @@ void s_init(void)
set_mux_conf_regs();
#ifdef CONFIG_SPL_BUILD
preloader_console_init();
do_io_settings();
#endif
prcm_init();
#ifdef CONFIG_SPL_BUILD

25
arch/arm/cpu/armv7/omap4/emif.c
View File

@ -1063,30 +1063,6 @@ static void do_sdram_init(u32 base)
debug("<<do_sdram_init() %x\n", base);
}
void sdram_init_pads(void)
{
u32 lpddr2io;
struct control_lpddr2io_regs *lpddr2io_regs =
(struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
u32 omap4_rev = omap_revision();
if (omap4_rev == OMAP4430_ES1_0)
lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
else if (omap4_rev == OMAP4430_ES2_0)
lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
else
return; /* Post ES2.1 reset values will work */
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_2);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_2);
writel(CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1, CONTROL_EFUSE_2);
}
static void emif_post_init_config(u32 base)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
@ -1243,7 +1219,6 @@ void sdram_init(void)
debug("in_sdram = %d\n", in_sdram);
if (!in_sdram) {
sdram_init_pads();
bypass_dpll(&prcm->cm_clkmode_dpll_core);
}

18
arch/arm/include/asm/arch-omap4/emif.h
View File

@ -593,17 +593,6 @@ struct dmm_lisa_map_regs {
u32 dmm_lisa_map_3;
};
struct control_lpddr2io_regs {
u32 control_lpddr2io1_0;
u32 control_lpddr2io1_1;
u32 control_lpddr2io1_2;
u32 control_lpddr2io1_3;
u32 control_lpddr2io2_0;
u32 control_lpddr2io2_1;
u32 control_lpddr2io2_2;
u32 control_lpddr2io2_3;
};
#define CS0 0
#define CS1 1
/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
@ -823,13 +812,6 @@ struct control_lpddr2io_regs {
/* MR16 value: refresh full array(no partial array self refresh) */
#define MR16_REF_FULL_ARRAY 0
/* LPDDR2 IO regs */
#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
/*
* Maximum number of entries we keep in our array of timing tables
* We need not keep all the speed bins supported by the device

45
arch/arm/include/asm/arch-omap4/omap4.h
View File

@ -54,8 +54,6 @@
/* LPDDR2 IO regs */
#define LPDDR2_IO_REGS_BASE 0x4A100638
#define CONTROL_EFUSE_2 0x4A100704
/* CONTROL_ID_CODE */
#define CONTROL_ID_CODE 0x4A002204
@ -84,6 +82,9 @@
/* GPMC */
#define OMAP44XX_GPMC_BASE 0x50000000
/* SYSTEM CONTROL MODULE */
#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
/*
* Hardware Register Details
*/
@ -108,6 +109,22 @@
#define PRM_RSTCTRL PRM_DEVICE_BASE
#define PRM_RSTCTRL_RESET 0x01
/* Control Module */
#define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5)
#define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f
#define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110
#define CONTROL_EFUSE_2_OVERRIDE 0x00084000
/* LPDDR2 IO regs */
#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C
#define LPDDR2IO_GR10_WD_MASK (3 << 17)
#define CONTROL_LPDDR2IO_3_VAL 0xA0888C00
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
#ifndef __ASSEMBLY__
struct s32ktimer {
@ -115,6 +132,30 @@ struct s32ktimer {
unsigned int s32k_cr; /* 0x10 */
};
struct omap4_sys_ctrl_regs {
unsigned int pad1[129];
unsigned int control_id_code; /* 0x4A002204 */
unsigned int pad11[22];
unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */
unsigned int pad2[47];
unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
unsigned int pad3[260341];
unsigned int control_efuse_1; /* 0x4A100700 */
unsigned int control_efuse_2; /* 0x4A100704 */
};
struct control_lpddr2io_regs {
unsigned int control_lpddr2io1_0;
unsigned int control_lpddr2io1_1;
unsigned int control_lpddr2io1_2;
unsigned int control_lpddr2io1_3;
unsigned int control_lpddr2io2_0;
unsigned int control_lpddr2io2_1;
unsigned int control_lpddr2io2_2;
unsigned int control_lpddr2io2_3;
};
#endif /* __ASSEMBLY__ */
/*