board: st: stm32mp1: Add usb gadget support

Enable USB gadget support using DWC2 driver
Populate board_usb_init() to initialize clocks,
phy, reset and data needed for DWC2 IP.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
This commit is contained in:
Patrice Chotard 2018-08-10 17:12:14 +02:00 committed by Tom Rini
parent 411bf0e17a
commit 4c834b965a

View File

@ -5,13 +5,181 @@
#include <config.h>
#include <common.h>
#include <led.h>
#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
#include <phy.h>
#include <reset.h>
#include <usb.h>
#include <asm/arch/stm32.h>
#include <asm/io.h>
#include <power/regulator.h>
#include <usb/dwc2_udc.h>
/*
* Get a global data pointer
*/
DECLARE_GLOBAL_DATA_PTR;
#define STM32MP_GUSBCFG 0x40002407
#define STM32MP_GGPIO 0x38
#define STM32MP_GGPIO_VBUS_SENSING BIT(21)
static struct dwc2_plat_otg_data stm32mp_otg_data = {
.usb_gusbcfg = STM32MP_GUSBCFG,
};
static struct reset_ctl usbotg_reset;
int board_usb_init(int index, enum usb_init_type init)
{
struct fdtdec_phandle_args args;
struct udevice *dev;
const void *blob = gd->fdt_blob;
struct clk clk;
struct phy phy;
int node;
int phy_provider;
int ret;
/* find the usb otg node */
node = fdt_node_offset_by_compatible(blob, -1, "snps,dwc2");
if (node < 0) {
debug("Not found usb_otg device\n");
return -ENODEV;
}
if (!fdtdec_get_is_enabled(blob, node)) {
debug("stm32 usbotg is disabled in the device tree\n");
return -ENODEV;
}
/* Enable clock */
ret = fdtdec_parse_phandle_with_args(blob, node, "clocks",
"#clock-cells", 0, 0, &args);
if (ret) {
debug("usbotg has no clocks defined in the device tree\n");
return ret;
}
ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &dev);
if (ret)
return ret;
if (args.args_count != 1) {
debug("Can't find clock ID in the device tree\n");
return -ENODATA;
}
clk.dev = dev;
clk.id = args.args[0];
ret = clk_enable(&clk);
if (ret) {
debug("Failed to enable usbotg clock\n");
return ret;
}
/* Reset */
ret = fdtdec_parse_phandle_with_args(blob, node, "resets",
"#reset-cells", 0, 0, &args);
if (ret) {
debug("usbotg has no resets defined in the device tree\n");
goto clk_err;
}
ret = uclass_get_device_by_of_offset(UCLASS_RESET, args.node, &dev);
if (ret || args.args_count != 1)
goto clk_err;
usbotg_reset.dev = dev;
usbotg_reset.id = args.args[0];
reset_assert(&usbotg_reset);
udelay(2);
reset_deassert(&usbotg_reset);
/* Get USB PHY */
ret = fdtdec_parse_phandle_with_args(blob, node, "phys",
"#phy-cells", 0, 0, &args);
if (!ret) {
phy_provider = fdt_parent_offset(blob, args.node);
ret = uclass_get_device_by_of_offset(UCLASS_PHY,
phy_provider, &dev);
if (ret)
goto clk_err;
phy.dev = dev;
phy.id = fdtdec_get_uint(blob, args.node, "reg", -1);
ret = generic_phy_power_on(&phy);
if (ret) {
debug("unable to power on the phy\n");
goto clk_err;
}
ret = generic_phy_init(&phy);
if (ret) {
debug("failed to init usb phy\n");
goto phy_power_err;
}
}
/* Parse and store data needed for gadget */
stm32mp_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg");
if (stm32mp_otg_data.regs_otg == FDT_ADDR_T_NONE) {
debug("usbotg: can't get base address\n");
ret = -ENODATA;
goto phy_init_err;
}
stm32mp_otg_data.rx_fifo_sz = fdtdec_get_int(blob, node,
"g-rx-fifo-size", 0);
stm32mp_otg_data.np_tx_fifo_sz = fdtdec_get_int(blob, node,
"g-np-tx-fifo-size", 0);
stm32mp_otg_data.tx_fifo_sz = fdtdec_get_int(blob, node,
"g-tx-fifo-size", 0);
/* Enable voltage level detector */
if (!(fdtdec_parse_phandle_with_args(blob, node, "usb33d-supply",
NULL, 0, 0, &args))) {
if (!uclass_get_device_by_of_offset(UCLASS_REGULATOR,
args.node, &dev)) {
ret = regulator_set_enable(dev, true);
if (ret) {
debug("Failed to enable usb33d\n");
goto phy_init_err;
}
}
}
/* Enable vbus sensing */
setbits_le32(stm32mp_otg_data.regs_otg + STM32MP_GGPIO,
STM32MP_GGPIO_VBUS_SENSING);
return dwc2_udc_probe(&stm32mp_otg_data);
phy_init_err:
generic_phy_exit(&phy);
phy_power_err:
generic_phy_power_off(&phy);
clk_err:
clk_disable(&clk);
return ret;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
/* Reset usbotg */
reset_assert(&usbotg_reset);
udelay(2);
reset_deassert(&usbotg_reset);
return 0;
}
int board_late_init(void)
{
return 0;