board/mpl/common: remove the old legacy flash

Signed-off-by: David Mueller <d.mueller@elsoft.ch>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
David Müller 2011-12-22 13:38:19 +01:00 committed by Stefan Roese
parent 06b174124e
commit 4b11dba975
3 changed files with 183 additions and 897 deletions

View File

@ -53,13 +53,156 @@ extern int mem_test(ulong start, ulong ramsize, int quiet);
#define I2C_BACKUP_ADDR 0x7C00 /* 0x200 bytes for backup */
#define IMAGE_SIZE CONFIG_SYS_MONITOR_LEN /* ugly, but it works for now */
extern flash_info_t flash_info[]; /* info for FLASH chips */
#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
/*-----------------------------------------------------------------------
* On PIP/MIP405 we have 3 (4) possible boot mode
*
* - Boot from Flash (Flash CS = CS0, MPS CS = CS1)
* - Boot from MPS (Flash CS = CS1, MPS CS = CS0)
* - Boot from PCI with Flash map (Flash CS = CS0, MPS CS = CS1)
* - Boot from PCI with MPS map (Flash CS = CS1, MPS CS = CS0)
* The flash init is the first board specific routine which is called
* after code relocation (running from SDRAM)
* The first thing we do is to map the Flash CS to the Flash area and
* the MPS CS to the MPS area. Since the flash size is unknown at this
* point, we use the max flash size and the lowest flash address as base.
*
* After flash detection we adjust the size of the CS area accordingly.
* update_flash_size() will fix in wrong values in the flash_info structure,
* misc_init_r() will fix the values in the board info structure
*/
int get_boot_mode(void)
{
unsigned long pbcr;
int res = 0;
pbcr = mfdcr(CPC0_PSR);
if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
/* boot via MPS or MPS mapping */
res = BOOT_MPS;
if (pbcr & PSR_ROM_LOC)
/* boot via PCI.. */
res |= BOOT_PCI;
return res;
}
/* Map the flash high (in boot area)
This code can only be executed from SDRAM (after relocation).
*/
void setup_cs_reloc(void)
{
int mode;
/*
* since we are relocated, we can set-up the CS finaly
* but first of all, switch off PCI mapping (in case it
* was a PCI boot)
*/
out32r(PMM0MA, 0L);
/* get boot mode */
mode = get_boot_mode();
/*
* we map the flash high in every case
* first find out to which CS the flash is attached to
*/
if (mode & BOOT_MPS) {
/* map flash high on CS1 and MPS on CS0 */
mtdcr(EBC0_CFGADDR, PB0AP);
mtdcr(EBC0_CFGDATA, MPS_AP);
mtdcr(EBC0_CFGADDR, PB0CR);
mtdcr(EBC0_CFGDATA, MPS_CR);
/*
* we use the default values (max values) for the flash
* because its real size is not yet known
*/
mtdcr(EBC0_CFGADDR, PB1AP);
mtdcr(EBC0_CFGDATA, FLASH_AP);
mtdcr(EBC0_CFGADDR, PB1CR);
mtdcr(EBC0_CFGDATA, FLASH_CR_B);
} else {
/* map flash high on CS0 and MPS on CS1 */
mtdcr(EBC0_CFGADDR, PB1AP);
mtdcr(EBC0_CFGDATA, MPS_AP);
mtdcr(EBC0_CFGADDR, PB1CR);
mtdcr(EBC0_CFGDATA, MPS_CR);
/*
* we use the default values (max values) for the flash
* because its real size is not yet known
*/
mtdcr(EBC0_CFGADDR, PB0AP);
mtdcr(EBC0_CFGDATA, FLASH_AP);
mtdcr(EBC0_CFGADDR, PB0CR);
mtdcr(EBC0_CFGDATA, FLASH_CR_B);
}
}
#endif /* #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) */
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
/* adjust flash start and protection info */
int update_flash_size(int flash_size)
{
int i = 0, mode;
flash_info_t *info = &flash_info[0];
unsigned long flashcr;
unsigned long flash_base = (0 - flash_size) & 0xFFF00000;
if (flash_size > 128*1024*1024) {
printf("\n ### ERROR, wrong flash size: %X, reset board ###\n",
flash_size);
hang();
}
if ((flash_size >> 20) != 0)
i = __ilog2(flash_size >> 20);
/* set up flash CS according to the size */
mode = get_boot_mode();
if (mode & BOOT_MPS) {
/* flash is on CS1 */
mtdcr(EBC0_CFGADDR, PB1CR);
flashcr = mfdcr(EBC0_CFGDATA);
/* we map the flash high in every case */
flashcr &= 0x0001FFFF; /* mask out address bits */
flashcr |= flash_base; /* start addr */
flashcr |= (i << 17); /* size addr */
mtdcr(EBC0_CFGADDR, PB1CR);
mtdcr(EBC0_CFGDATA, flashcr);
} else {
/* flash is on CS0 */
mtdcr(EBC0_CFGADDR, PB0CR);
flashcr = mfdcr(EBC0_CFGDATA);
/* we map the flash high in every case */
flashcr &= 0x0001FFFF; /* mask out address bits */
flashcr |= flash_base; /* start addr */
flashcr |= (i << 17); /* size addr */
mtdcr(EBC0_CFGADDR, PB0CR);
mtdcr(EBC0_CFGDATA, flashcr);
}
for (i = 0; i < info->sector_count; i++)
/* adjust sector start address */
info->start[i] = flash_base +
(info->start[i] - CONFIG_SYS_FLASH_BASE);
/* unprotect all sectors */
flash_protect(FLAG_PROTECT_CLEAR,
info->start[0],
0xFFFFFFFF,
info);
flash_protect_default();
/* protect reset vector too*/
flash_protect(FLAG_PROTECT_SET,
info->start[info->sector_count-1],
0xFFFFFFFF,
info);
return 0;
}
#endif
static int
mpl_prg(uchar *src, ulong size)
{
ulong start;
flash_info_t *info;
flash_info_t *info = &flash_info[0];
int i, rc;
#if defined(CONFIG_PATI)
int start_sect;
@ -69,8 +212,6 @@ mpl_prg(uchar *src, ulong size)
ulong *magic = (ulong *)src;
#endif
info = &flash_info[0];
#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405) || defined(CONFIG_PATI)
if (uimage_to_cpu (magic[0]) != IH_MAGIC) {
puts("Bad Magic number\n");
@ -96,12 +237,18 @@ mpl_prg(uchar *src, ulong size)
}
#if !defined(CONFIG_PATI)
start = 0 - size;
for (i = info->sector_count-1; i > 0; i--) {
info->protect[i] = 0; /* unprotect this sector */
/* unprotect sectors used by u-boot */
flash_protect(FLAG_PROTECT_CLEAR,
start,
0xFFFFFFFF,
info);
/* search start sector */
for (i = info->sector_count-1; i > 0; i--)
if (start >= info->start[i])
break;
}
/* set-up flash location */
/* now erase flash */
printf("Erasing at %lx (sector %d) (start %lx)\n",
start,i,info->start[i]);
@ -114,22 +261,24 @@ mpl_prg(uchar *src, ulong size)
#else /* #if !defined(CONFIG_PATI */
start = FIRM_START;
start_sect = -1;
for (i = 0; i < info->sector_count; i++) {
if (start < info->start[i]) {
start_sect = i - 1;
break;
}
}
info->protect[i - 1] = 0; /* unprotect this sector */
for (; i < info->sector_count; i++) {
if ((start + size) < info->start[i])
/* search start sector */
for (i = info->sector_count-1; i > 0; i--)
if (start >= info->start[i])
break;
info->protect[i] = 0; /* unprotect this sector */
}
i--;
/* set-up flash location */
start_sect = i;
for (i = info->sector_count-1; i > 0; i--)
if ((start + size) >= info->start[i])
break;
/* unprotect sectors used by u-boot */
flash_protect(FLAG_PROTECT_CLEAR,
start,
start + size,
info);
/* now erase flash */
printf ("Erasing at %lx to %lx (sector %d to %d) (%lx to %lx)\n",
start, start + size, start_sect, i,
@ -143,12 +292,17 @@ mpl_prg(uchar *src, ulong size)
#elif defined(CONFIG_VCMA9)
start = 0;
for (i = 0; i <info->sector_count; i++) {
info->protect[i] = 0; /* unprotect this sector */
/* search end sector */
for (i = 0; i < info->sector_count; i++)
if (size < info->start[i])
break;
}
/* set-up flash location */
flash_protect(FLAG_PROTECT_CLEAR,
start,
size,
info);
/* now erase flash */
printf("Erasing at %lx (sector %d) (start %lx)\n",
start,0,info->start[0]);

View File

@ -30,11 +30,15 @@ typedef struct {
char eth_addr[21]; /* "00:60:C2:0a:00:00" */
} backup_t;
extern flash_info_t flash_info[]; /* info for FLASH chips */
void get_backup_values(backup_t *buf);
#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
#define BOOT_MPS 0x01
#define BOOT_PCI 0x02
int get_boot_mode(void);
void setup_cs_reloc(void);
#endif
void check_env(void);

View File

@ -1,872 +0,0 @@
/*
* (C) Copyright 2000, 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Modified 4/5/2001
* Wait for completion of each sector erase command issued
* 4/5/2001
* Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
*/
/*
* Modified 3/7/2001
* - adapted for pip405, Denis Peter, MPL AG Switzerland
* TODO:
* clean-up
*/
#include <common.h>
#if !defined(CONFIG_PATI)
#include <asm/ppc4xx.h>
#include <asm/processor.h>
#include "common_util.h"
#if defined(CONFIG_MIP405)
#include "../mip405/mip405.h"
#endif
#if defined(CONFIG_PIP405)
#include "../pip405/pip405.h"
#endif
#include <asm/4xx_pci.h>
#else /* defined(CONFIG_PATI) */
#include <mpc5xx.h>
#endif
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info);
static int write_word (flash_info_t *info, ulong dest, ulong data);
void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt);
#define ADDR0 0x5555
#define ADDR1 0x2aaa
#define FLASH_WORD_SIZE unsigned short
#define FALSE 0
#define TRUE 1
#if !defined(CONFIG_PATI)
/*-----------------------------------------------------------------------
* Some CS switching routines:
*
* On PIP/MIP405 we have 3 (4) possible boot mode
*
* - Boot from Flash (Flash CS = CS0, MPS CS = CS1)
* - Boot from MPS (Flash CS = CS1, MPS CS = CS0)
* - Boot from PCI with Flash map (Flash CS = CS0, MPS CS = CS1)
* - Boot from PCI with MPS map (Flash CS = CS1, MPS CS = CS0)
* The flash init is the first board specific routine which is called
* after code relocation (running from SDRAM)
* The first thing we do is to map the Flash CS to the Flash area and
* the MPS CS to the MPS area. Since the flash size is unknown at this
* point, we use the max flash size and the lowest flash address as base.
*
* After flash detection we adjust the size of the CS area accordingly.
* The board_init_r will fill in wrong values in the board init structure,
* but this will be fixed in the misc_init_r routine:
* bd->bi_flashstart=0-flash_info[0].size
* bd->bi_flashsize=flash_info[0].size-CONFIG_SYS_MONITOR_LEN
* bd->bi_flashoffset=0
*
*/
int get_boot_mode(void)
{
unsigned long pbcr;
int res = 0;
pbcr = mfdcr (CPC0_PSR);
if ((pbcr & PSR_ROM_WIDTH_MASK) == 0)
/* boot via MPS or MPS mapping */
res = BOOT_MPS;
if(pbcr & PSR_ROM_LOC)
/* boot via PCI.. */
res |= BOOT_PCI;
return res;
}
/* Map the flash high (in boot area)
This code can only be executed from SDRAM (after relocation).
*/
void setup_cs_reloc(void)
{
int mode;
/* Since we are relocated, we can set-up the CS finaly
* but first of all, switch off PCI mapping (in case it was a PCI boot) */
out32r(PMM0MA,0L);
icache_enable (); /* we are relocated */
/* get boot mode */
mode=get_boot_mode();
/* we map the flash high in every case */
/* first findout on which cs the flash is */
if(mode & BOOT_MPS) {
/* map flash high on CS1 and MPS on CS0 */
mtdcr (EBC0_CFGADDR, PB0AP);
mtdcr (EBC0_CFGDATA, MPS_AP);
mtdcr (EBC0_CFGADDR, PB0CR);
mtdcr (EBC0_CFGDATA, MPS_CR);
/* we use the default values (max values) for the flash
* because its real size is not yet known */
mtdcr (EBC0_CFGADDR, PB1AP);
mtdcr (EBC0_CFGDATA, FLASH_AP);
mtdcr (EBC0_CFGADDR, PB1CR);
mtdcr (EBC0_CFGDATA, FLASH_CR_B);
}
else {
/* map flash high on CS0 and MPS on CS1 */
mtdcr (EBC0_CFGADDR, PB1AP);
mtdcr (EBC0_CFGDATA, MPS_AP);
mtdcr (EBC0_CFGADDR, PB1CR);
mtdcr (EBC0_CFGDATA, MPS_CR);
/* we use the default values (max values) for the flash
* because its real size is not yet known */
mtdcr (EBC0_CFGADDR, PB0AP);
mtdcr (EBC0_CFGDATA, FLASH_AP);
mtdcr (EBC0_CFGADDR, PB0CR);
mtdcr (EBC0_CFGDATA, FLASH_CR_B);
}
}
#endif /* #if !defined(CONFIG_PATI) */
unsigned long flash_init (void)
{
unsigned long size_b0;
int i;
#if !defined(CONFIG_PATI)
unsigned long flashcr,size_reg;
int mode;
extern char version_string;
char *p = &version_string;
/* Since we are relocated, we can set-up the CS finally */
setup_cs_reloc();
/* get and display boot mode */
mode=get_boot_mode();
if(mode & BOOT_PCI)
printf("(PCI Boot %s Map) ",(mode & BOOT_MPS) ?
"MPS" : "Flash");
else
printf("(%s Boot) ",(mode & BOOT_MPS) ?
"MPS" : "Flash");
#endif /* #if !defined(CONFIG_PATI) */
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size((vu_long *)CONFIG_SYS_MONITOR_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* protect the bootloader */
/* Monitor protection ON by default */
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_MONITOR_BASE,
CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
&flash_info[0]);
#endif
#if !defined(CONFIG_PATI)
/* protect reset vector */
flash_info[0].protect[flash_info[0].sector_count-1] = 1;
flash_info[0].size = size_b0;
/* set up flash cs according to the size */
size_reg=(flash_info[0].size >>20);
switch (size_reg) {
case 0:
case 1: i=0; break; /* <= 1MB */
case 2: i=1; break; /* = 2MB */
case 4: i=2; break; /* = 4MB */
case 8: i=3; break; /* = 8MB */
case 16: i=4; break; /* = 16MB */
case 32: i=5; break; /* = 32MB */
case 64: i=6; break; /* = 64MB */
case 128: i=7; break; /*= 128MB */
default:
printf("\n #### ERROR, wrong size %ld MByte reset board #####\n",size_reg);
while(1);
}
if(mode & BOOT_MPS) {
/* flash is on CS1 */
mtdcr(EBC0_CFGADDR, PB1CR);
flashcr = mfdcr (EBC0_CFGDATA);
/* we map the flash high in every case */
flashcr&=0x0001FFFF; /* mask out address bits */
flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
flashcr|= (i << 17); /* size addr */
mtdcr(EBC0_CFGADDR, PB1CR);
mtdcr(EBC0_CFGDATA, flashcr);
}
else {
/* flash is on CS0 */
mtdcr(EBC0_CFGADDR, PB0CR);
flashcr = mfdcr (EBC0_CFGDATA);
/* we map the flash high in every case */
flashcr&=0x0001FFFF; /* mask out address bits */
flashcr|= ((0-flash_info[0].size) & 0xFFF00000); /* start addr */
flashcr|= (i << 17); /* size addr */
mtdcr(EBC0_CFGADDR, PB0CR);
mtdcr(EBC0_CFGDATA, flashcr);
}
#if 0
/* enable this (PIP405/MIP405 only) if you want to test if
the relocation has be done ok.
This will disable both Chipselects */
mtdcr (EBC0_CFGADDR, PB0CR);
mtdcr (EBC0_CFGDATA, 0L);
mtdcr (EBC0_CFGADDR, PB1CR);
mtdcr (EBC0_CFGDATA, 0L);
printf("CS0 & CS1 switched off for test\n");
#endif
/* patch version_string */
for(i=0;i<0x100;i++) {
if(*p=='\n') {
*p=0;
break;
}
p++;
}
#else /* #if !defined(CONFIG_PATI) */
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
CONFIG_ENV_ADDR,
CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
&flash_info[0]);
#endif
#endif /* #if !defined(CONFIG_PATI) */
return (size_b0);
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t *info)
{
int i;
int k;
int size;
int erased;
volatile unsigned long *flash;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
case FLASH_MAN_INTEL: printf ("Intel "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
break;
case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
break;
case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
break;
case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
break;
case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
break;
case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
break;
case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
break;
case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
break;
case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
break;
case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
break;
case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
break;
case FLASH_INTEL320T: printf ("TE28F320C3 (32 Mbit, top sector size)\n");
break;
case FLASH_AM640U: printf ("AM29LV640U (64 Mbit, uniform sector size)\n");
break;
default: printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
/*
* Check if whole sector is erased
*/
if (i != (info->sector_count-1))
size = info->start[i+1] - info->start[i];
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
flash = (volatile unsigned long *)info->start[i];
size = size >> 2; /* divide by 4 for longword access */
for (k=0; k<size; k++) {
if (*flash++ != 0xffffffff) {
erased = 0;
break;
}
}
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s%s",
info->start[i],
erased ? " E" : " ",
info->protect[i] ? "RO " : " ");
}
printf ("\n");
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (vu_long *addr, flash_info_t *info)
{
short i;
FLASH_WORD_SIZE value;
ulong base;
volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
/* Write auto select command: read Manufacturer ID */
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
value = addr2[0];
/* printf("flash_get_size value: %x\n",value); */
switch (value) {
case (FLASH_WORD_SIZE)AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
case (FLASH_WORD_SIZE)FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
case (FLASH_WORD_SIZE)INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
case (FLASH_WORD_SIZE)SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
return (0); /* no or unknown flash */
}
value = addr2[1]; /* device ID */
/* printf("Device value %x\n",value); */
switch (value) {
case (FLASH_WORD_SIZE)AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
case (FLASH_WORD_SIZE)AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00080000;
break; /* => 0.5 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00100000;
break; /* => 1 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00200000;
break; /* => 2 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00200000;
break; /* => 2 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 67;
info->size = 0x00400000;
break; /* => 4 MB */
case (FLASH_WORD_SIZE)AMD_ID_LV640U:
info->flash_id += FLASH_AM640U;
info->sector_count = 128;
info->size = 0x00800000;
break; /* => 8 MB */
#if 0 /* enable when device IDs are available */
case (FLASH_WORD_SIZE)AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 67;
info->size = 0x00400000;
break; /* => 4 MB */
#endif
case (FLASH_WORD_SIZE)SST_ID_xF800A:
info->flash_id += FLASH_SST800A;
info->sector_count = 16;
info->size = 0x00100000;
break; /* => 1 MB */
case (FLASH_WORD_SIZE)INTEL_ID_28F320C3T:
info->flash_id += FLASH_INTEL320T;
info->sector_count = 71;
info->size = 0x00400000;
break; /* => 4 MB */
case (FLASH_WORD_SIZE)SST_ID_xF160A:
info->flash_id += FLASH_SST160A;
info->sector_count = 32;
info->size = 0x00200000;
break; /* => 2 MB */
default:
info->flash_id = FLASH_UNKNOWN;
return (0); /* => no or unknown flash */
}
/* base address calculation */
base=0-info->size;
/* set up sector start address table */
if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
(info->flash_id == FLASH_AM040) ||
(info->flash_id == FLASH_AM640U)){
for (i = 0; i < info->sector_count; i++)
info->start[i] = base + (i * 0x00010000);
}
else {
if (info->flash_id & FLASH_BTYPE) {
/* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
info->start[3] = base + 0x00008000;
for (i = 4; i < info->sector_count; i++)
info->start[i] = base + (i * 0x00010000) - 0x00030000;
}
else {
/* set sector offsets for top boot block type */
i = info->sector_count - 1;
if(info->sector_count==71) {
info->start[i--] = base + info->size - 0x00002000;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
info->start[i--] = base + info->size - 0x00008000;
info->start[i--] = base + info->size - 0x0000A000;
info->start[i--] = base + info->size - 0x0000C000;
info->start[i--] = base + info->size - 0x0000E000;
for (; i >= 0; i--)
info->start[i] = base + i * 0x000010000;
}
else {
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
info->start[i--] = base + info->size - 0x00008000;
for (; i >= 0; i--)
info->start[i] = base + i * 0x00010000;
}
}
}
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
info->protect[i] = 0;
else
info->protect[i] = addr2[2] & 1;
}
/*
* Prevent writes to uninitialized FLASH.
*/
if (info->flash_id != FLASH_UNKNOWN) {
addr2 = (FLASH_WORD_SIZE *)info->start[0];
*addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
}
return (info->size);
}
int wait_for_DQ7(flash_info_t *info, int sect)
{
ulong start, now, last;
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
start = get_timer (0);
last = start;
while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return ERR_TIMOUT;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
return ERR_OK;
}
int intel_wait_for_DQ7(flash_info_t *info, int sect)
{
ulong start, now, last, status;
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
start = get_timer (0);
last = start;
while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
return ERR_TIMOUT;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
status = addr[0] & (FLASH_WORD_SIZE)0x00280028;
/* clear status register */
addr[0] = (FLASH_WORD_SIZE)0x00500050;
/* check status for block erase fail and VPP low */
return (status == 0 ? ERR_OK : ERR_NOT_ERASED);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t *info, int s_first, int s_last)
{
volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
volatile FLASH_WORD_SIZE *addr2;
int flag, prot, sect;
int i, rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
if (info->flash_id == FLASH_UNKNOWN) {
printf ("Can't erase unknown flash type - aborted\n");
return 1;
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
/* Start erase on unprotected sectors */
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
/* printf("Erasing sector %p\n", addr2); */ /* CLH */
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
for (i=0; i<50; i++)
udelay(1000); /* wait 1 ms */
rcode |= wait_for_DQ7(info, sect);
}
else {
if((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
addr2[0] = (FLASH_WORD_SIZE)0x00600060; /* unlock sector */
addr2[0] = (FLASH_WORD_SIZE)0x00D000D0; /* sector erase */
intel_wait_for_DQ7(info, sect);
addr2[0] = (FLASH_WORD_SIZE)0x00200020; /* sector erase */
addr2[0] = (FLASH_WORD_SIZE)0x00D000D0; /* sector erase */
rcode |= intel_wait_for_DQ7(info, sect);
}
else {
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
rcode |= wait_for_DQ7(info, sect);
}
}
/*
* Wait for each sector to complete, it's more
* reliable. According to AMD Spec, you must
* issue all erase commands within a specified
* timeout. This has been seen to fail, especially
* if printf()s are included (for debug)!!
*/
/* wait_for_DQ7(info, sect); */
}
}
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
/* reset to read mode */
addr = (FLASH_WORD_SIZE *)info->start[0];
addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
if (!rcode)
printf (" done\n");
return rcode;
}
void unlock_intel_sectors(flash_info_t *info,ulong addr,ulong cnt)
{
int i;
volatile FLASH_WORD_SIZE *addr2;
long c;
c= (long)cnt;
for(i=info->sector_count-1;i>0;i--)
{
if(addr>=info->start[i])
break;
}
do {
addr2 = (FLASH_WORD_SIZE *)(info->start[i]);
addr2[0] = (FLASH_WORD_SIZE)0x00600060; /* unlock sector setup */
addr2[0] = (FLASH_WORD_SIZE)0x00D000D0; /* unlock sector */
intel_wait_for_DQ7(info, i);
i++;
c-=(info->start[i]-info->start[i-1]);
}while(c>0);
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp, data;
int i, l, rc;
if((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
unlock_intel_sectors(info,addr,cnt);
}
wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
for (; i<4 && cnt>0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt==0 && i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
}
/*
* handle word aligned part
*/
while (cnt >= 4) {
data = 0;
for (i=0; i<4; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_word(info, wp, data)) != 0) {
return (rc);
}
wp += 4;
if((wp % 0x10000)==0)
printf("."); /* show Progress */
cnt -= 4;
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i<4; ++i, ++cp) {
data = (data << 8) | (*(uchar *)cp);
}
rc=write_word(info, wp, data);
return rc;
}
/*-----------------------------------------------------------------------
* Write a word to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static FLASH_WORD_SIZE *read_val = (FLASH_WORD_SIZE *)0x200000;
static int write_word (flash_info_t *info, ulong dest, ulong data)
{
volatile FLASH_WORD_SIZE *addr2 = (volatile FLASH_WORD_SIZE *)(info->start[0]);
volatile FLASH_WORD_SIZE *dest2 = (volatile FLASH_WORD_SIZE *)dest;
volatile FLASH_WORD_SIZE *data2;
ulong start;
ulong *data_p;
int flag;
int i;
data_p = &data;
data2 = (volatile FLASH_WORD_SIZE *)data_p;
/* Check if Flash is (sufficiently) erased */
if ((*((volatile FLASH_WORD_SIZE *)dest) &
(FLASH_WORD_SIZE)data) != (FLASH_WORD_SIZE)data) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
for (i=0; i<4/sizeof(FLASH_WORD_SIZE); i++)
{
if((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
/* intel style writting */
dest2[i] = (FLASH_WORD_SIZE)0x00500050;
dest2[i] = (FLASH_WORD_SIZE)0x00400040;
*read_val++ = data2[i];
dest2[i] = data2[i];
if (flag)
enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
udelay(10);
while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080)
{
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
return (1);
}
dest2[i] = (FLASH_WORD_SIZE)0x00FF00FF; /* return to read mode */
udelay(10);
dest2[i] = (FLASH_WORD_SIZE)0x00FF00FF; /* return to read mode */
if(dest2[i]!=data2[i])
printf("Error at %p 0x%04X != 0x%04X\n",&dest2[i],dest2[i],data2[i]);
}
else {
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
addr2[ADDR0] = (FLASH_WORD_SIZE)0x00A000A0;
dest2[i] = data2[i];
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts();
/* data polling for D7 */
start = get_timer (0);
while ((dest2[i] & (FLASH_WORD_SIZE)0x00800080) !=
(data2[i] & (FLASH_WORD_SIZE)0x00800080)) {
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
return (1);
}
}
}
}
return (0);
}
/*-----------------------------------------------------------------------
*/