mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
x86: coral: Update config and device tree for ACPI
Enable new features and provide require device-tree config so that U-Boot produces the correct ACPI tables on Coral. Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass
Bin Meng
parent
ee3cb7c648
commit
49f5141ed3
|
|
@ -15,14 +15,20 @@
|
|||
#include "flashmap-16mb-rw.dtsi"
|
||||
#endif
|
||||
|
||||
#include <dt-bindings/clock/intel-clock.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/x86-irq.h>
|
||||
#include <asm/e820.h>
|
||||
#include <asm/intel_pinctrl_defs.h>
|
||||
#include <asm/arch-apollolake/cpu.h>
|
||||
#include <asm/arch-apollolake/gpe.h>
|
||||
#include <asm/arch-apollolake/gpio.h>
|
||||
#include <asm/arch-apollolake/iomap.h>
|
||||
#include <asm/arch-apollolake/pm.h>
|
||||
#include <dt-bindings/clock/intel-clock.h>
|
||||
#include <asm/arch-apollolake/fsp/fsp_m_upd.h>
|
||||
#include <asm/arch-apollolake/fsp/fsp_s_upd.h>
|
||||
#include <dt-bindings/sound/nhlt.h>
|
||||
|
||||
/ {
|
||||
model = "Google Coral";
|
||||
|
|
@ -40,6 +46,14 @@
|
|||
i2c5 = &i2c_5;
|
||||
i2c6 = &i2c_6;
|
||||
i2c7 = &i2c_7;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
board: board {
|
||||
compatible = "google,coral";
|
||||
recovery-gpios = <&gpio_nw (-1) GPIO_ACTIVE_LOW>;
|
||||
write-protect-gpios = <&gpio_nw GPIO_75 GPIO_ACTIVE_HIGH>;
|
||||
phase-enforce-gpios = <&gpio_n GPIO_10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
config {
|
||||
|
|
@ -48,6 +62,15 @@
|
|||
|
||||
chosen {
|
||||
stdout-path = &serial;
|
||||
e820-entries = /bits/ 64 <
|
||||
IOMAP_P2SB_BAR IOMAP_P2SB_SIZE E820_RESERVED
|
||||
MCH_BASE_ADDRESS MCH_SIZE E820_RESERVED>;
|
||||
u-boot,acpi-ssdt-order = <&cpu_0 &cpu_1 &cpu_2 &cpu_3
|
||||
&i2c_0 &i2c_1 &i2c_2 &i2c_3 &i2c_4 &i2c_5
|
||||
&sdmmc &maxim_codec &wifi &da_codec &tpm
|
||||
&elan_touchscreen &raydium_touchscreen
|
||||
&elan_touchpad &synaptics_touchpad &wacom_digitizer>;
|
||||
u-boot,acpi-dsdt-order = <&board &lpc>;
|
||||
};
|
||||
|
||||
clk: clock {
|
||||
|
|
@ -60,7 +83,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
cpu_0: cpu@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
device_type = "cpu";
|
||||
compatible = "intel,apl-cpu";
|
||||
|
|
@ -68,21 +91,21 @@
|
|||
intel,apic-id = <0>;
|
||||
};
|
||||
|
||||
cpu@1 {
|
||||
cpu_1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,apl-cpu";
|
||||
reg = <1>;
|
||||
intel,apic-id = <2>;
|
||||
};
|
||||
|
||||
cpu@2 {
|
||||
cpu_2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,apl-cpu";
|
||||
reg = <2>;
|
||||
intel,apic-id = <4>;
|
||||
};
|
||||
|
||||
cpu@3 {
|
||||
cpu_3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "intel,apl-cpu";
|
||||
reg = <3>;
|
||||
|
|
@ -128,6 +151,10 @@
|
|||
*/
|
||||
fsp_s: fsp-s {
|
||||
};
|
||||
|
||||
nhlt {
|
||||
intel,dmic-channels = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
punit@0,1 {
|
||||
|
|
@ -136,21 +163,29 @@
|
|||
compatible = "intel,apl-punit";
|
||||
};
|
||||
|
||||
gma@2,0 {
|
||||
reg = <0x00001000 0 0 0 0>;
|
||||
compatible = "fsp-fb";
|
||||
};
|
||||
|
||||
p2sb: p2sb@d,0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x02006810 0 0 0 0>;
|
||||
compatible = "intel,p2sb";
|
||||
early-regs = <IOMAP_P2SB_BAR 0x100000>;
|
||||
pci,no-autoconfig;
|
||||
|
||||
n {
|
||||
compatible = "intel,apl-pinctrl";
|
||||
u-boot,dm-pre-reloc;
|
||||
intel,p2sb-port-id = <PID_GPIO_N>;
|
||||
acpi,path = "\\_SB.GPO0";
|
||||
gpio_n: gpio-n {
|
||||
compatible = "intel,gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
linux-name = "INT3452:00";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -159,11 +194,13 @@
|
|||
compatible = "intel,apl-pinctrl";
|
||||
intel,p2sb-port-id = <PID_GPIO_NW>;
|
||||
#gpio-cells = <2>;
|
||||
acpi,path = "\\_SB.GPO1";
|
||||
gpio_nw: gpio-nw {
|
||||
compatible = "intel,gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
linux-name = "INT3452:01";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -172,11 +209,13 @@
|
|||
compatible = "intel,apl-pinctrl";
|
||||
intel,p2sb-port-id = <PID_GPIO_W>;
|
||||
#gpio-cells = <2>;
|
||||
acpi,path = "\\_SB.GPO2";
|
||||
gpio_w: gpio-w {
|
||||
compatible = "intel,gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
linux-name = "INT3452:02";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -185,11 +224,13 @@
|
|||
compatible = "intel,apl-pinctrl";
|
||||
intel,p2sb-port-id = <PID_GPIO_SW>;
|
||||
#gpio-cells = <2>;
|
||||
acpi,path = "\\_SB.GPO3";
|
||||
gpio_sw: gpio-sw {
|
||||
compatible = "intel,gpio";
|
||||
u-boot,dm-pre-reloc;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
linux-name = "INT3452:03";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -238,6 +279,24 @@
|
|||
gpe0-en = <0x30>;
|
||||
};
|
||||
|
||||
audio@e,0 {
|
||||
reg = <0x7000 0 0 0 0>;
|
||||
compatible = "simple-bus";
|
||||
acpi,name = "HDAS";
|
||||
i2s {
|
||||
compatible = "fred";
|
||||
};
|
||||
maxim_codec: maxim-codec {
|
||||
compatible = "maxim,max98357a";
|
||||
acpi,ddn = "Maxim Integrated 98357A Amplifier";
|
||||
sdmode-gpios = <&gpio_n GPIO_76 GPIO_ACTIVE_HIGH>;
|
||||
sdmode-delay = <5>;
|
||||
acpi,name = "MAXM";
|
||||
acpi,hid = "MX98357A";
|
||||
acpi,audio-link = <AUDIO_LINK_SSP5>;
|
||||
};
|
||||
};
|
||||
|
||||
spi: fast-spi@d,2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
reg = <0x02006a10 0 0 0 0>;
|
||||
|
|
@ -267,19 +326,63 @@
|
|||
};
|
||||
};
|
||||
|
||||
/* WiFi */
|
||||
pcie-a0@14,0 {
|
||||
reg = <0x0000a000 0 0 0 0>;
|
||||
acpi,name = "RP01";
|
||||
wifi: wifi {
|
||||
compatible = "intel,generic-wifi";
|
||||
acpi,ddn = "Intel WiFi";
|
||||
acpi,name = "WF00";
|
||||
acpi,wake = <GPE0_DW3_00>;
|
||||
interrupts-extended = <&acpi_gpe 0x3c 0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_0: i2c2@16,0 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b010 0 0 0 0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
i2c-scl-rising-time-ns = <104>;
|
||||
i2c-scl-falling-time-ns = <52>;
|
||||
clock-frequency = <400000>;
|
||||
i2c,speeds = <100000 400000 1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
da_codec: da-codec {
|
||||
reg = <0x1a>;
|
||||
compatible = "dlg,da7219";
|
||||
interrupts-extended = <&acpi_gpe GPIO_116_IRQ
|
||||
(IRQ_TYPE_LEVEL_LOW | X86_IRQ_TYPE_SHARED)>;
|
||||
acpi,name = "DLG7";
|
||||
acpi,ddn = "Dialog Semiconductor DA7219 Audio Codec";
|
||||
acpi,audio-link = <AUDIO_LINK_SSP1>;
|
||||
dlg,micbias-lvl = <2600>;
|
||||
dlg,mic-amp-in-sel = "diff";
|
||||
da7219_aad {
|
||||
dlg,btn-cfg = <50>;
|
||||
dlg,mic-det-thr = <500>;
|
||||
dlg,jack-ins-deb = <20>;
|
||||
dlg,jack-det-rate = "32ms_64ms";
|
||||
dlg,jack-rem-deb = <1>;
|
||||
dlg,a-d-btn-thr = <0xa>;
|
||||
dlg,d-b-btn-thr = <0x16>;
|
||||
dlg,b-c-btn-thr = <0x21>;
|
||||
dlg,c-mic-btn-thr = <0x3e>;
|
||||
dlg,btn-avg = <4>;
|
||||
dlg,adc-1bit-rpt = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c_1: i2c2@16,1 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b110 0 0 0 0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
status = "disabled";
|
||||
clock-frequency = <400000>;
|
||||
i2c,speeds = <100000 400000 1000000 3400000>;
|
||||
i2c-scl-rising-time-ns = <52>;
|
||||
i2c-scl-falling-time-ns = <52>;
|
||||
};
|
||||
|
||||
i2c_2: i2c2@16,2 {
|
||||
|
|
@ -288,53 +391,130 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-frequency = <400000>;
|
||||
i2c,speeds = <100000 400000 1000000>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
i2c-scl-rising-time-ns = <57>;
|
||||
i2c-scl-falling-time-ns = <28>;
|
||||
tpm@50 {
|
||||
tpm: tpm@50 {
|
||||
reg = <0x50>;
|
||||
compatible = "google,cr50";
|
||||
u-boot,i2c-offset-len = <0>;
|
||||
ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>;
|
||||
interrupts-extended = <&acpi_gpe 0x3c 0>;
|
||||
interrupts-extended = <&acpi_gpe GPIO_28_IRQ
|
||||
IRQ_TYPE_EDGE_FALLING>;
|
||||
acpi,hid = "GOOG0005";
|
||||
acpi,ddn = "I2C TPM";
|
||||
acpi,name = "TPMI";
|
||||
};
|
||||
};
|
||||
|
||||
i2c_3: i2c2@16,3 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b110 0 0 0 0>;
|
||||
reg = <0x0200b310 0 0 0 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
i2c-scl-rising-time-ns = <76>;
|
||||
i2c-scl-falling-time-ns = <164>;
|
||||
clock-frequency = <400000>;
|
||||
i2c,speeds = <100000 400000>;
|
||||
elan_touchscreen: elan-touchscreen@10 {
|
||||
compatible = "i2c-chip";
|
||||
reg = <0x10>;
|
||||
acpi,hid = "ELAN0001";
|
||||
acpi,ddn = "ELAN Touchscreen";
|
||||
interrupts-extended = <&acpi_gpe GPIO_21_IRQ
|
||||
IRQ_TYPE_EDGE_FALLING>;
|
||||
linux,probed;
|
||||
reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>;
|
||||
reset-delay-ms = <20>;
|
||||
enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>;
|
||||
enable-delay-ms = <1>;
|
||||
acpi,has-power-resource;
|
||||
};
|
||||
|
||||
raydium_touchscreen: raydium-touchscreen@39 {
|
||||
compatible = "i2c-chip";
|
||||
reg = <0x39>;
|
||||
acpi,hid = "RAYD0001";
|
||||
acpi,ddn = "Raydium Touchscreen";
|
||||
interrupts-extended = <&acpi_gpe GPIO_21_IRQ
|
||||
IRQ_TYPE_EDGE_FALLING>;
|
||||
linux,probed;
|
||||
reset-gpios = <&gpio_n GPIO_36 GPIO_ACTIVE_HIGH>;
|
||||
reset-delay-ms = <1>;
|
||||
enable-gpios = <&gpio_n GPIO_152 GPIO_ACTIVE_HIGH>;
|
||||
enable-delay-ms = <50>;
|
||||
acpi,has-power-resource;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_4: i2c2@17,0 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b110 0 0 0 0>;
|
||||
reg = <0x0200b810 0 0 0 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
i2c-sda-hold-time-ns = <350>;
|
||||
i2c-scl-rising-time-ns = <114>;
|
||||
i2c-scl-falling-time-ns = <164>;
|
||||
clock-frequency = <400000>;
|
||||
i2c,speeds = <100000 400000>;
|
||||
elan_touchpad: elan-touchpad@15 {
|
||||
compatible = "i2c-chip";
|
||||
reg = <0x15>;
|
||||
u-boot,i2c-offset-len = <0>;
|
||||
acpi,hid = "ELAN0000";
|
||||
acpi,ddn = "ELAN Touchpad";
|
||||
interrupts-extended = <&acpi_gpe GPIO_18_IRQ
|
||||
IRQ_TYPE_EDGE_FALLING>;
|
||||
acpi,wake = <GPE0_DW1_15>;
|
||||
linux,probed;
|
||||
};
|
||||
synaptics_touchpad: synaptics-touchpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
acpi,hid = "PNP0C50";
|
||||
acpi,ddn = "Synaptics Touchpad";
|
||||
interrupts-extended = <&acpi_gpe GPIO_18_IRQ
|
||||
IRQ_TYPE_EDGE_FALLING>;
|
||||
acpi,wake = <GPE0_DW1_15>;
|
||||
linux,probed;
|
||||
hid-descr-addr = <0x20>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_5: i2c2@17,1 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b110 0 0 0 0>;
|
||||
reg = <0x0200b910 0 0 0 0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
i2c-scl-rising-time-ns = <76>;
|
||||
i2c-scl-falling-time-ns = <164>;
|
||||
clock-frequency = <400000>;
|
||||
i2c,speeds = <100000 400000 1000000>;
|
||||
wacom_digitizer: wacom-digitizer@9 {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x9>;
|
||||
acpi,hid = "WCOM50C1";
|
||||
acpi,ddn = "WCOM Digitizer";
|
||||
interrupts-extended = <&acpi_gpe GPIO_13_IRQ
|
||||
(IRQ_TYPE_LEVEL_LOW | X86_IRQ_TYPE_SHARED)>;
|
||||
hid-descr-addr = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_6: i2c2@17,2 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b110 0 0 0 0>;
|
||||
reg = <0x0200ba10 0 0 0 0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_7: i2c2@17,3 {
|
||||
compatible = "intel,apl-i2c";
|
||||
reg = <0x0200b110 0 0 0 0>;
|
||||
reg = <0x0200bb10 0 0 0 0>;
|
||||
clocks = <&clk CLK_I2C>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -347,6 +527,15 @@
|
|||
reg-shift = <2>;
|
||||
clock-frequency = <1843200>;
|
||||
current-speed = <115200>;
|
||||
acpi,name = "URT3";
|
||||
pci,no-autoconfig;
|
||||
};
|
||||
|
||||
sdmmc: sdmmc@1b,0 {
|
||||
reg = <0x0000d800 0 0 0 0>;
|
||||
compatible = "intel,apl-sd";
|
||||
cd-gpios = <&gpio_n GPIO_177 GPIO_ACTIVE_LOW>;
|
||||
acpi,name = "SDCD";
|
||||
};
|
||||
|
||||
pch: pch@1f,0 {
|
||||
|
|
@ -356,7 +545,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
lpc {
|
||||
lpc: lpc {
|
||||
compatible = "intel,apl-lpc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -594,12 +783,17 @@
|
|||
* [6:0] steps of delay for HS200, each 125ps
|
||||
*/
|
||||
/* Enable DPTF */
|
||||
dptf-enable;
|
||||
fsps,dptf-enabled;
|
||||
fsps,emmc-tx-data-cntl1 = <0x0c16>;
|
||||
fsps,emmc-tx-data-cntl2 = <0x28162828>;
|
||||
fsps,emmc-rx-cmd-data-cntl1 = <0x00181717>;
|
||||
fsps,emmc-rx-cmd-data-cntl2 = <0x10008>;
|
||||
|
||||
/* Enable Audio Clock and Power gating */
|
||||
fsps,hd-audio-clk-gate = <1>;
|
||||
fsps,hd-audio-pwr-gate = <1>;
|
||||
fsps,bios-cfg-lock-down = <1>;
|
||||
|
||||
/* Enable WiFi */
|
||||
fsps,pcie-root-port-en = [01 00 00 00 00 00];
|
||||
fsps,pcie-rp-hot-plug = [00 00 00 00 00 00];
|
||||
|
|
@ -611,6 +805,10 @@
|
|||
fsps,port-usb20-per-port-pe-txi-set = [07 07 06 06 07 07 07 01];
|
||||
fsps,port-usb20-per-port-txi-set = [00 02 00 00 00 00 00 03];
|
||||
|
||||
fsps,lpss-s0ix-enable = <1>;
|
||||
fsps,usb-otg = <0>;
|
||||
fsps,monitor-mwait-enable = <0>;
|
||||
|
||||
/*
|
||||
* TODO(sjg@chromium.org): Move this to the I2C nodes
|
||||
* Intel Common SoC Config
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x3d00
|
|||
CONFIG_NR_DRAM_BANKS=8
|
||||
CONFIG_SPL_DM_SPI=y
|
||||
CONFIG_SPL_TEXT_BASE=0xfef10000
|
||||
CONFIG_MAX_CPUS=8
|
||||
CONFIG_SPL_SYS_MALLOC_F_LEN=0xf000
|
||||
CONFIG_BOOTSTAGE_STASH_ADDR=0xfef00000
|
||||
CONFIG_DEBUG_UART_BOARD_INIT=y
|
||||
|
|
@ -14,9 +15,10 @@ CONFIG_VENDOR_GOOGLE=y
|
|||
CONFIG_TARGET_CHROMEBOOK_CORAL=y
|
||||
CONFIG_DEBUG_UART=y
|
||||
CONFIG_FSP_VERSION2=y
|
||||
CONFIG_GENERATE_ACPI_TABLE=y
|
||||
CONFIG_HAVE_ACPI_RESUME=y
|
||||
CONFIG_INTEL_CAR_CQOS=y
|
||||
CONFIG_X86_OFFSET_U_BOOT=0xffe00000
|
||||
CONFIG_X86_OFFSET_U_BOOT=0xffd00000
|
||||
CONFIG_X86_OFFSET_SPL=0xffe80000
|
||||
CONFIG_INTEL_GENERIC_WIFI=y
|
||||
CONFIG_BOOTSTAGE=y
|
||||
|
|
@ -26,13 +28,14 @@ CONFIG_BOOTSTAGE_REPORT=y
|
|||
CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10
|
||||
CONFIG_BOOTSTAGE_STASH=y
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro earlyprintk console=tty0 console=ttyS0,115200"
|
||||
CONFIG_BOOTARGS="console=ttyS2,115200n8 cros_legacy loglevel=9 init=/sbin/init oops=panic panic=-1 root=PARTUUID=35c775e7-3735-d745-93e5-d9e0238f7ed0/PARTNROFF=1 rootwait rw noinitrd vt.global_cursor_default=0 add_efi_memmap boot=local noresume noswap i915.modeset=1 nmi_watchdog=panic,lapic disablevmx=off"
|
||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
||||
CONFIG_SPL_LOG=y
|
||||
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
||||
CONFIG_LAST_STAGE_INIT=y
|
||||
CONFIG_BLOBLIST=y
|
||||
# CONFIG_TPL_BLOBLIST is not set
|
||||
CONFIG_BLOBLIST_SIZE=0x30000
|
||||
CONFIG_BLOBLIST_ADDR=0x100000
|
||||
CONFIG_HANDOFF=y
|
||||
CONFIG_TPL_SYS_MALLOC_SIMPLE=y
|
||||
|
|
@ -74,8 +77,10 @@ CONFIG_SYSCON=y
|
|||
CONFIG_SPL_OF_TRANSLATE=y
|
||||
CONFIG_INTEL_ACPIGEN=y
|
||||
CONFIG_CPU=y
|
||||
CONFIG_BOARD=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_DW=y
|
||||
CONFIG_MISC=y
|
||||
CONFIG_TPL_MISC=y
|
||||
CONFIG_CROS_EC=y
|
||||
CONFIG_CROS_EC_LPC=y
|
||||
|
|
@ -87,7 +92,9 @@ CONFIG_PINCTRL=y
|
|||
CONFIG_DEBUG_UART_SHIFT=2
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SOUND_DA7219=y
|
||||
CONFIG_SOUND_I8254=y
|
||||
CONFIG_SOUND_MAX98357A=y
|
||||
CONFIG_SOUND_RT5677=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_ICH_SPI=y
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user