gpio: fixes for gpio-hog support

recently added gpio hog patch was "in discussion"
state with Simon Glass. This patch now adds most
of comments from Simon Glass.

Signed-off-by: Heiko Schocher <hs@denx.de>
This commit is contained in:
Heiko Schocher 2019-07-17 06:59:51 +02:00 committed by Tom Rini
parent 5917d0b877
commit 49b10cb492
5 changed files with 95 additions and 41 deletions

View File

@ -49,7 +49,7 @@
#include <linux/err.h>
#include <efi_loader.h>
#include <wdt.h>
#if defined(CONFIG_DM_GPIO_HOG)
#if defined(CONFIG_GPIO_HOG)
#include <asm/gpio.h>
#endif
@ -799,7 +799,7 @@ static init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_CMD_NET
initr_ethaddr,
#endif
#if defined(CONFIG_DM_GPIO_HOG)
#if defined(CONFIG_GPIO_HOG)
gpio_hog_probe_all,
#endif
#ifdef CONFIG_BOARD_LATE_INIT

View File

@ -252,6 +252,7 @@ Example:
boot_rescue {
gpio-hog;
input;
line-name = "foo-bar-gpio";
gpios = <7 GPIO_ACTIVE_LOW>;
};
};
@ -259,9 +260,13 @@ Example:
For the above Example you can than access the gpio in your boardcode
with:
desc = gpio_hog_lookup_name("boot_rescue.gpio-hog");
if (desc) {
if (dm_gpio_get_value(desc))
printf("\nBooting into Rescue System\n");
else
printf("\nBoot normal\n");
struct gpio_desc *desc;
int ret;
ret = gpio_hog_lookup_name("boot_rescue", &desc);
if (ret)
return;
if (dm_gpio_get_value(desc) == 1)
printf("\nBooting into Rescue System\n");
else if (dm_gpio_get_value(desc) == 0)
printf("\nBoot normal\n");

View File

@ -14,7 +14,7 @@ config DM_GPIO
particular GPIOs that they provide. The uclass interface
is defined in include/asm-generic/gpio.h.
config DM_GPIO_HOG
config GPIO_HOG
bool "Enable GPIO hog support"
depends on DM_GPIO
default n

View File

@ -144,7 +144,7 @@ static int gpio_find_and_xlate(struct gpio_desc *desc,
return gpio_xlate_offs_flags(desc->dev, desc, args);
}
#if defined(CONFIG_DM_GPIO_HOG)
#if defined(CONFIG_GPIO_HOG)
struct gpio_hog_priv {
struct gpio_desc gpiod;
@ -181,9 +181,8 @@ static int gpio_hog_ofdata_to_platdata(struct udevice *dev)
return ret;
}
nodename = dev_read_string(dev, "line-name");
if (!nodename)
nodename = dev_read_name(dev);
device_set_name(dev, nodename);
if (nodename)
device_set_name(dev, nodename);
return 0;
}
@ -202,9 +201,15 @@ static int gpio_hog_probe(struct udevice *dev)
dev->name);
return ret;
}
dm_gpio_set_dir(&priv->gpiod);
if (plat->gpiod_flags == GPIOD_IS_OUT)
dm_gpio_set_value(&priv->gpiod, plat->value);
if (plat->gpiod_flags == GPIOD_IS_OUT) {
ret = dm_gpio_set_value(&priv->gpiod, plat->value);
if (ret < 0) {
debug("%s: node %s could not set gpio.\n", __func__,
dev->name);
return ret;
}
}
return 0;
}
@ -213,32 +218,38 @@ int gpio_hog_probe_all(void)
{
struct udevice *dev;
int ret;
int retval = 0;
for (uclass_first_device(UCLASS_NOP, &dev);
dev;
uclass_find_next_device(&dev)) {
if (dev->driver == DM_GET_DRIVER(gpio_hog)) {
ret = device_probe(dev);
if (ret)
return ret;
if (ret) {
printf("Failed to probe device %s err: %d\n",
dev->name, ret);
retval = ret;
}
}
}
return 0;
return retval;
}
struct gpio_desc *gpio_hog_lookup_name(const char *name)
int gpio_hog_lookup_name(const char *name, struct gpio_desc **desc)
{
struct udevice *dev;
*desc = NULL;
gpio_hog_probe_all();
if (!uclass_get_device_by_name(UCLASS_NOP, name, &dev)) {
struct gpio_hog_priv *priv = dev_get_priv(dev);
return &priv->gpiod;
*desc = &priv->gpiod;
return 0;
}
return NULL;
return -ENODEV;
}
U_BOOT_DRIVER(gpio_hog) = {
@ -250,9 +261,9 @@ U_BOOT_DRIVER(gpio_hog) = {
.platdata_auto_alloc_size = sizeof(struct gpio_hog_data),
};
#else
struct gpio_desc *gpio_hog_lookup_name(const char *name)
int gpio_hog_lookup_name(const char *name, struct gpio_desc **desc)
{
return NULL;
return 0;
}
#endif
@ -755,13 +766,45 @@ int dm_gpio_get_values_as_int(const struct gpio_desc *desc_list, int count)
return vector;
}
/**
* gpio_request_tail: common work for requesting a gpio.
*
* ret: return value from previous work in function which calls
* this function.
* This seems bogus (why calling this function instead not
* calling it and end caller function instead?).
* Because on error in caller function we want to set some
* default values in gpio desc and have a common error
* debug message, which provides this function.
* nodename: Name of node for which gpio gets requested
* used for gpio label name.
* args: pointer to output arguments structure
* list_name: Name of GPIO list
* used for gpio label name.
* index: gpio index in gpio list
* used for gpio label name.
* desc: pointer to gpio descriptor, filled from this
* function.
* flags: gpio flags to use.
* add_index: should index added to gpio label name
* gpio_dev: pointer to gpio device from which the gpio
* will be requested. If NULL try to get the
* gpio device with uclass_get_device_by_ofnode()
*
* return: In error case this function sets default values in
* gpio descriptor, also emmits a debug message.
* On success it returns 0 else the error code from
* function calls, or the error code passed through
* ret to this function.
*
*/
static int gpio_request_tail(int ret, const char *nodename,
struct ofnode_phandle_args *args,
const char *list_name, int index,
struct gpio_desc *desc, int flags,
bool add_index, struct udevice *dev)
bool add_index, struct udevice *gpio_dev)
{
desc->dev = dev;
desc->dev = gpio_dev;
desc->offset = 0;
desc->flags = 0;
if (ret)
@ -771,7 +814,8 @@ static int gpio_request_tail(int ret, const char *nodename,
ret = uclass_get_device_by_ofnode(UCLASS_GPIO, args->node,
&desc->dev);
if (ret) {
debug("%s: uclass_get_device_by_ofnode failed\n", __func__);
debug("%s: uclass_get_device_by_ofnode failed\n",
__func__);
goto err;
}
}
@ -989,10 +1033,8 @@ int gpio_dev_request_index(struct udevice *dev, const char *nodename,
static int gpio_post_bind(struct udevice *dev)
{
#if defined(CONFIG_DM_GPIO_HOG)
struct udevice *child;
ofnode node;
#endif
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
struct dm_gpio_ops *ops = (struct dm_gpio_ops *)device_get_ops(dev);
@ -1024,16 +1066,21 @@ static int gpio_post_bind(struct udevice *dev)
}
#endif
#if defined(CONFIG_DM_GPIO_HOG)
dev_for_each_subnode(node, dev) {
if (ofnode_read_bool(node, "gpio-hog")) {
const char *name = ofnode_get_name(node);
if (IS_ENABLED(CONFIG_GPIO_HOG)) {
dev_for_each_subnode(node, dev) {
if (ofnode_read_bool(node, "gpio-hog")) {
const char *name = ofnode_get_name(node);
int ret;
device_bind_driver_to_node(dev, "gpio_hog", name,
node, &child);
ret = device_bind_driver_to_node(dev,
"gpio_hog",
name, node,
&child);
if (ret)
return ret;
}
}
}
#endif
return 0;
}

View File

@ -352,9 +352,10 @@ int dm_gpio_lookup_name(const char *name, struct gpio_desc *desc);
* gpio_hog_lookup_name() - Look up a named GPIO and return the gpio descr.
*
* @name: Name to look up
* @return: Returns gpio_desc for gpio
* @desc: Returns GPIO description, on success, else NULL
* @return: Returns 0 if OK, else -ENODEV
*/
struct gpio_desc *gpio_hog_lookup_name(const char *name);
int gpio_hog_lookup_name(const char *name, struct gpio_desc **desc);
/**
* gpio_hog_probe_all() - probe all gpio devices with
@ -523,12 +524,13 @@ int gpio_request_list_by_name_nodev(ofnode node, const char *list_name,
* gpio_dev_request_index() - request single GPIO from gpio device
*
* @dev: GPIO device
* @nodename: Name of node
* @nodename: Name of node for which gpio gets requested, used
* for the gpio label name
* @list_name: Name of GPIO list (e.g. "board-id-gpios")
* @index: Index number of the GPIO in that list use request (0=first)
* @flags: GPIOD_* flags
* @dtflags: GPIO flags read from DT
* @desc: GPIO descriotor filled from this function
* @dtflags: GPIO flags read from DT defined see GPIOD_*
* @desc: returns GPIO descriptor filled from this function
* @return: return value from gpio_request_tail()
*/
int gpio_dev_request_index(struct udevice *dev, const char *nodename,