brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-06 03:06:16 +09:00
Code Issues Projects Releases Wiki Activity

dts: exynos: pit: Add a new node for the parade video bridge driver

Browse Source 
The new driver supports driver model and configuration via device tree. Add
a node for pit, which needs this driver.

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2015-07-02 18:16:18 -06:00
parent 59408eb205
commit 48b6c32d77
1 changed files with 123 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

128
arch/arm/dts/exynos5420-peach-pit.dts
View File

@ -65,11 +65,129 @@
compatible = "maxim,max98090-codec";
};
edp-lvds-bridge@48 {
compatible = "parade,ps8625";
reg = <0x48>;
sleep-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
reset-gpio = <&gpy7 7 GPIO_ACTIVE_HIGH>;
edp-lvds-bridge@48 {
compatible = "parade,ps8625";
reg = <0x48>;
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpy7 7 GPIO_ACTIVE_LOW>;
parade,regs = /bits/ 8 <
0x02 0xa1 0x01 /* HPD low */
/*
* SW setting
* [1:0] SW output 1.2V voltage is lower to 96%
*/
0x04 0x14 0x01
/*
* RCO SS setting
* [5:4] = b01 0.5%, b10 1%, b11 1.5%
*/
0x04 0xe3 0x20
0x04 0xe2 0x80 /* [7] RCO SS enable */
/*
* RPHY Setting
* [3:2] CDR tune wait cycle before
* measure for fine tune b00: 1us,
* 01: 0.5us, 10:2us, 11:4us.
*/
0x04 0x8a 0x0c
0x04 0x89 0x08 /* [3] RFD always on */
/*
* CTN lock in/out:
* 20000ppm/80000ppm. Lock out 2
* times.
*/
0x04 0x71 0x2d
/*
* 2.7G CDR settings
* NOF=40LSB for HBR CDR setting
*/
0x04 0x7d 0x07
0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
/*
* 1.62G CDR settings
* [5:2]NOF=64LSB [1:0]DCO scale is 2/5
*/
0x04 0xc0 0x12
0x04 0xc1 0x92 /* Gitune=-37% */
0x04 0xc2 0x1c /* Fbstep=100% */
0x04 0x32 0x80 /* [7]LOS signal disable */
/*
* RPIO Setting
* [7:4] LVDS driver bias current :
* 75% (250mV swing)
*/
0x04 0x00 0xb0
/*
* [7:6] Right-bar GPIO output strength is 8mA
*/
0x04 0x15 0x40
/* EQ Training State Machine Setting */
0x04 0x54 0x10 /* RCO calibration start */
/* [4:0] MAX_LANE_COUNT set to one lane */
0x01 0x02 0x81
/* [4:0] LANE_COUNT_SET set to one lane */
0x01 0x21 0x81
0x00 0x52 0x20
0x00 0xf1 0x03 /* HPD CP toggle enable */
0x00 0x62 0x41
/* Counter number add 1ms counter delay */
0x00 0xf6 0x01
/*
* [6]PWM function control by
* DPCD0040f[7], default is PWM
* block always works.
*/
0x00 0x77 0x06
/*
* 04h Adjust VTotal tolerance to
* fix the 30Hz no display issue
*/
0x00 0x4c 0x04
/* DPCD00400='h00, Parade OUI = 'h001cf8 */
0x01 0xc0 0x00
0x01 0xc1 0x1c /* DPCD00401='h1c */
0x01 0xc2 0xf8 /* DPCD00402='hf8 */
/*
* DPCD403~408 = ASCII code
* D2SLV5='h4432534c5635
*/
0x01 0xc3 0x44
0x01 0xc4 0x32 /* DPCD404 */
0x01 0xc5 0x53 /* DPCD405 */
0x01 0xc6 0x4c /* DPCD406 */
0x01 0xc7 0x56 /* DPCD407 */
0x01 0xc8 0x35 /* DPCD408 */
/*
* DPCD40A, Initial Code major revision
* '01'
*/
0x01 0xca 0x01
/* DPCD40B Initial Code minor revision '05' */
0x01 0xcb 0x05
/* DPCD720 Select internal PWM */
0x01 0xa5 0xa0
/*
* FFh for 100% PWM of brightness, 0h for 0%
* brightness
*/
0x01 0xa7 0xff
/*
* Set LVDS output as 6bit-VESA mapping,
* single LVDS channel
*/
0x01 0xcc 0x13
/* Enable SSC set by register */
0x02 0xb1 0x20
/*
* Set SSC enabled and +/-1% central
* spreading
*/
0x04 0x10 0x16
/* MPU Clock source: LC => RCO */
0x04 0x59 0x60
0x04 0x54 0x14 /* LC -> RCO */
0x02 0xa1 0x91>; /* HPD high */
};
};