diff --git a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
index 10b070ea06..b5d74068c5 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-axg-pmx.c
@@ -142,6 +142,7 @@ const struct pinconf_param meson_axg_pinconf_params[] = {
 	{ "bias-disable", PIN_CONFIG_BIAS_DISABLE, 0 },
 	{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
 	{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
+	{ "drive-strength-microamp", PIN_CONFIG_DRIVE_STRENGTH_UA, 0 },
 };
 
 const struct pinctrl_ops meson_axg_pinctrl_ops = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson.c b/drivers/pinctrl/meson/pinctrl-meson.c
index eb40a84ed1..f664d76b54 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.c
+++ b/drivers/pinctrl/meson/pinctrl-meson.c
@@ -222,6 +222,47 @@ static int meson_pinconf_bias_set(struct udevice *dev, unsigned int pin,
 	return 0;
 }
 
+static int meson_pinconf_drive_strength_set(struct udevice *dev,
+					    unsigned int pin,
+					    unsigned int drive_strength_ua)
+{
+	struct meson_pinctrl *priv = dev_get_priv(dev);
+	unsigned int offset = pin - priv->data->pin_base;
+	unsigned int reg, bit;
+	unsigned int ds_val;
+	int ret;
+
+	if (!priv->reg_ds) {
+		dev_err(dev, "drive-strength-microamp not supported\n");
+		return -ENOTSUPP;
+	}
+
+	ret = meson_gpio_calc_reg_and_bit(dev, offset, REG_DS, &reg, &bit);
+	if (ret)
+		return ret;
+
+	bit = bit << 1;
+
+	if (drive_strength_ua <= 500) {
+		ds_val = MESON_PINCONF_DRV_500UA;
+	} else if (drive_strength_ua <= 2500) {
+		ds_val = MESON_PINCONF_DRV_2500UA;
+	} else if (drive_strength_ua <= 3000) {
+		ds_val = MESON_PINCONF_DRV_3000UA;
+	} else if (drive_strength_ua <= 4000) {
+		ds_val = MESON_PINCONF_DRV_4000UA;
+	} else {
+		dev_warn(dev,
+			 "pin %u: invalid drive-strength-microamp : %d , default to 4mA\n",
+			 pin, drive_strength_ua);
+		ds_val = MESON_PINCONF_DRV_4000UA;
+	}
+
+	clrsetbits_le32(priv->reg_ds + reg, 0x3 << bit, ds_val << bit);
+
+	return 0;
+}
+
 int meson_pinconf_set(struct udevice *dev, unsigned int pin,
 		      unsigned int param, unsigned int arg)
 {
@@ -233,7 +274,9 @@ int meson_pinconf_set(struct udevice *dev, unsigned int pin,
 	case PIN_CONFIG_BIAS_PULL_DOWN:
 		ret = meson_pinconf_bias_set(dev, pin, param);
 		break;
-
+	case PIN_CONFIG_DRIVE_STRENGTH_UA:
+		ret = meson_pinconf_drive_strength_set(dev, pin, arg);
+		break;
 	default:
 		dev_err(dev, "unsupported configuration parameter %u\n", param);
 		return -EINVAL;
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
index 0882dfe713..98010cdaf9 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.h
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -58,6 +58,16 @@ struct meson_reg_desc {
 	unsigned int bit;
 };
 
+/**
+ * enum meson_pinconf_drv - value of drive-strength supported
+ */
+enum meson_pinconf_drv {
+	MESON_PINCONF_DRV_500UA,
+	MESON_PINCONF_DRV_2500UA,
+	MESON_PINCONF_DRV_3000UA,
+	MESON_PINCONF_DRV_4000UA,
+};
+
 /**
  * enum meson_reg_type - type of registers encoded in @meson_reg_desc
  */
@@ -67,6 +77,7 @@ enum meson_reg_type {
 	REG_DIR,
 	REG_OUT,
 	REG_IN,
+	REG_DS,
 	NUM_REG,
 };
 
@@ -99,19 +110,24 @@ struct meson_bank {
 		.num_groups = ARRAY_SIZE(fn ## _groups),		\
 	}
 
-#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib)		\
-	{								\
-		.name	= n,						\
-		.first	= f,						\
-		.last	= l,						\
-		.regs	= {						\
-			[REG_PULLEN]	= { per, peb },			\
-			[REG_PULL]	= { pr, pb },			\
-			[REG_DIR]	= { dr, db },			\
-			[REG_OUT]	= { or, ob },			\
-			[REG_IN]	= { ir, ib },			\
-		},							\
-	 }
+#define BANK_DS(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib, \
+		dsr, dsb)                                                  \
+	{                                                                  \
+		.name = n,                                                 \
+		.first = f,                                                \
+		.last = l,                                                 \
+		.regs = {                                                  \
+		    [REG_PULLEN] = {per, peb},                             \
+		    [REG_PULL] = {pr, pb},                                 \
+		    [REG_DIR] = {dr, db},                                  \
+		    [REG_OUT] = { or, ob},                                 \
+		    [REG_IN] = {ir, ib},                                   \
+		    [REG_DS] = {dsr, dsb},                                 \
+		},                                                         \
+	}
+
+#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+	BANK_DS(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib, 0, 0)
 
 #define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)