image: Add IH_OS_TEE for TEE chain-load boot

This patch adds a new type IH_OS_TEE. This new OS type will be used for
chain-loading to Linux via a TEE.

With this patch in-place you can generate a bootable OPTEE image like this:

mkimage -A arm -T kernel -O tee -C none -d tee.bin uTee.optee

where "tee.bin" is the input binary prefixed with an OPTEE header and
uTee.optee is the output prefixed with a u-boot wrapper header.

This image type "-T kernel -O tee" is differentiated from the existing
IH_TYPE_TEE "-T tee" in that the IH_TYPE is installed by u-boot (flow
control returns to u-boot) whereas for the new IH_OS_TEE control passes to
the OPTEE firmware and the firmware chainloads onto Linux.

Andrew Davis gave the following ASCII diagram:

IH_OS_TEE: (mkimage -T kernel -O tee)
Non-Secure       Secure

                 BootROM
                   |
      -------------
     |
     v
    SPL
     |
     v
   U-Boot ------>
          <-----  OP-TEE
      |
      V
    Linux

IH_TYPE_TEE: (mkimage -T tee)
Non-Secure       Secure

                 BootROM
                   |
      -------------
     |
     v
    SPL ------->
         <-----  OP-TEE
     |
     v
   U-Boot
      |
      V
    Linux

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Suggested-by: Andrew F. Davis <afd@ti.com>
Cc: Harinarayan Bhatta <harinarayan@ti.com>
Cc: Andrew F. Davis <afd@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Cc: Peng Fan <peng.fan@nxp.com>
Link: http://mrvan.github.io/optee-imx6ul
This commit is contained in:
Bryan O'Donoghue 2018-03-13 16:50:35 +00:00 committed by Tom Rini
parent 6ffc420045
commit 45b55712d4
3 changed files with 15 additions and 2 deletions

View File

@ -100,6 +100,7 @@ static const table_entry_t uimage_os[] = {
{ IH_OS_OSE, "ose", "Enea OSE", },
{ IH_OS_PLAN9, "plan9", "Plan 9", },
{ IH_OS_RTEMS, "rtems", "RTEMS", },
{ IH_OS_TEE, "tee", "Trusted Execution Environment" },
{ IH_OS_U_BOOT, "u-boot", "U-Boot", },
{ IH_OS_VXWORKS, "vxworks", "VxWorks", },
#if defined(CONFIG_CMD_ELF) || defined(USE_HOSTCC)

View File

@ -153,6 +153,7 @@ enum {
IH_OS_PLAN9, /* Plan 9 */
IH_OS_OPENRTOS, /* OpenRTOS */
IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */
IH_OS_TEE, /* Trusted Execution Environment */
IH_OS_COUNT,
};

View File

@ -18,6 +18,7 @@
#include "mkimage.h"
#include <image.h>
#include <tee/optee.h>
#include <u-boot/crc.h>
static image_header_t header;
@ -90,6 +91,8 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
uint32_t checksum;
time_t time;
uint32_t imagesize;
uint32_t ep;
uint32_t addr;
image_header_t * hdr = (image_header_t *)ptr;
@ -99,18 +102,26 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
sbuf->st_size - sizeof(image_header_t));
time = imagetool_get_source_date(params, sbuf->st_mtime);
ep = params->ep;
addr = params->addr;
if (params->type == IH_TYPE_FIRMWARE_IVT)
/* Add size of CSF minus IVT */
imagesize = sbuf->st_size - sizeof(image_header_t) + 0x1FE0;
else
imagesize = sbuf->st_size - sizeof(image_header_t);
if (params->os == IH_OS_TEE) {
addr = optee_image_get_load_addr(hdr);
ep = optee_image_get_entry_point(hdr);
}
/* Build new header */
image_set_magic(hdr, IH_MAGIC);
image_set_time(hdr, time);
image_set_size(hdr, imagesize);
image_set_load(hdr, params->addr);
image_set_ep(hdr, params->ep);
image_set_load(hdr, addr);
image_set_ep(hdr, ep);
image_set_dcrc(hdr, checksum);
image_set_os(hdr, params->os);
image_set_arch(hdr, params->arch);