diff --git a/arch/Kconfig b/arch/Kconfig index 7023223927..dd1ff9d963 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -162,6 +162,8 @@ config SANDBOX imply CMD_CLONE imply SILENT_CONSOLE imply BOOTARGS_SUBST + imply PHY_FIXED + imply DM_DSA config SH bool "SuperH architecture" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 01b5ba58de..b39b043efe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1463,6 +1463,24 @@ config TARGET_LS1021ATWR select DM_SPI_FLASH if FSL_DSPI || FSL_QSPI imply SCSI +config TARGET_PG_WCOM_SELI8 + bool "Support Hitachi-Powergrids SELI8 service unit card" + select ARCH_LS1021A + select ARCH_SUPPORT_PSCI + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + select CPU_V7A + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT + select SYS_FSL_DDR + select FSL_DDR_INTERACTIVE + select VENDOR_KM + imply SCSI + help + Support for Hitachi-Powergrids SELI8 service unit card. + SELI8 is a QorIQ LS1021a based service unit card used + in XMC20 and FOX615 product families. + config TARGET_LS1021ATSN bool "Support ls1021atsn" select ARCH_LS1021A @@ -1587,6 +1605,26 @@ config TARGET_SL28 select ARMV8_MULTIENTRY select SUPPORT_SPL select BINMAN + select DM + select DM_GPIO + select DM_I2C + select DM_MMC + select DM_SPI_FLASH + select DM_ETH + select DM_MDIO + select DM_PCI + select DM_RNG + select DM_RTC + select DM_SCSI + select DM_SERIAL + select DM_SPI + select DM_USB + select SPL_DM if SPL + select SPL_DM_SPI if SPL + select SPL_DM_SPI_FLASH if SPL + select SPL_DM_I2C if SPL + select SPL_DM_MMC if SPL + select SPL_DM_SERIAL if SPL help Support for Kontron SMARC-sAL28 board. @@ -1972,6 +2010,7 @@ source "board/variscite/dart_6ul/Kconfig" source "board/vscom/baltos/Kconfig" source "board/phytium/durian/Kconfig" source "board/xen/xenguest_arm64/Kconfig" +source "board/keymile/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c index d5131bcf4b..01dd6a30e8 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c @@ -6,7 +6,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -67,10 +69,19 @@ void spl_board_init(void) void board_init_f(ulong dummy) { + int ret; + icache_enable(); /* Clear global data */ memset((void *)gd, 0, sizeof(gd_t)); + if (IS_ENABLED(CONFIG_DEBUG_UART)) + debug_uart_init(); board_early_init_f(); + ret = spl_early_init(); + if (ret) { + debug("spl_early_init() failed: %d\n", ret); + hang(); + } timer_init(); #ifdef CONFIG_ARCH_LS2080A env_init(); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index b58f841472..1dd6c4b2e8 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -398,6 +398,8 @@ dtb-$(CONFIG_ARCH_LS1021A) += ls1021a-qds-duart.dtb \ ls1021a-qds-lpuart.dtb \ ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb \ ls1021a-iot-duart.dtb ls1021a-tsn.dtb +dtb-$(CONFIG_TARGET_PG_WCOM_SELI8) += ls1021a-pg-wcom-seli8.dtb + dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls2080a-qds-42-x.dtb \ fsl-ls2080a-rdb.dtb \ diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi index 240178ab4e..b3861ed98c 100644 --- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi +++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi @@ -133,6 +133,14 @@ }; }; +#ifdef CONFIG_SL28_ENABLE_SER0_CONSOLE +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; +}; +#endif + #ifdef CONFIG_SL28_SPL_LOADS_ATF_BL31 &binman { fit { @@ -250,6 +258,10 @@ u-boot,dm-pre-reloc; }; +&lpuart1 { + u-boot,dm-pre-reloc; +}; + &serial0 { u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi new file mode 100644 index 0000000000..23816da8ee --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 1xxx + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using a SCH-30842 card with AQR112 PHY in slot 1 for ENETC + * port 0 USXGMII. + */ +&slot1 { + #include "fsl-sch-30842.dtsi" +}; + +&enetc0 { + status = "okay"; + phy-mode = "usxgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi new file mode 100644 index 0000000000..c6558ae2e0 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 6xxx + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using SCH-30842 cards with AQR112 PHY. + */ +&slot1 { + #include "fsl-sch-30842.dtsi" +}; + +&enetc0 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi new file mode 100644 index 0000000000..fb1836a8ae --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 7777 + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using a SCH-30841 card with AQR412 10G quad PHY. + * + * Switch ports are mapped 1:1 to AQR412 card ports seated in slot 1. + * Bottom port is port 0. + * Note that this is only usable for: + * - QDS boards WITHOUT lane B rework, + * - AQR412 card WITHOUT lane A -> lane C rework + * + * The following DTS assumes DIP SW5[1-3] = 000b. + */ +&slot1 { +#include "fsl-sch-30841.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>; +}; + +&mscc_felix_port1 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>; +}; + +&mscc_felix_port2 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; +}; + +&mscc_felix_port3 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi new file mode 100644 index 0000000000..1d02a3e11d --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 7xx7 + * + * Copyright 2019-2021 NXP Semiconductors + */ + +&slot1 { +#include "fsl-sch-30841.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>; +}; + +&mscc_felix_port3 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi new file mode 100644 index 0000000000..7d4702e4ff --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 8xxx + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using SCH-24801 cards with VSC8234 quad SGMII PHY in slot 1. + */ +&slot1 { + #include "fsl-sch-24801.dtsi" +}; + +&enetc0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi new file mode 100644 index 0000000000..c92dd1bd2e --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 9999 + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using SCH-24801 cards with VSC8234 quad SGMII PHY. + * LS1028A QDS boards with lane B rework require two cards for the 4 switch + * ports, QDS boards without the lane B rework only require one card. + * + * Switch ports are routed as follows: + * Port 0 goes to 1st port of VSC8234 quad card in slot 1, + * Port 1: + * - if the QDS has had lane B rework, it is 1st port in slot 2, + * - otherwise it is 2nd port in slot 1. + * Port 2: + * - if DIP SW5[1] = 0 it is 3rd port in slot 1, + * - otherwise it is 1st port in slot 3. + * Port 3: + * - if DIP SW5[2-3] = 00b it is 4th port in slot 1, + * - if DIP SW5[2-3] = 01b it is 2nd port in slot 3, + * - if DIP SW5[2-3] = 11b it is 1st port in slot 4. + * + * The following DTS assumes QDS lane B rework and DIP SW5[1-3] = 000b. Two + * SCH-24801 cards are required in slots 1 and 2. + */ +&slot1 { + #include "fsl-sch-24801.dtsi" +}; + +&slot2 { + #include "fsl-sch-24801.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; +}; + +&mscc_felix_port1 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>; +}; + +&mscc_felix_port2 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; +}; + +&mscc_felix_port3 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi new file mode 100644 index 0000000000..941f7472eb --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 9999 + * + * Copyright 2019-2021 NXP Semiconductors + * + */ + +/* + * This set-up is using SCH-24801 cards with VSC8234 quad SGMII PHY. + * + * Switch ports are mapped 1:1 to VSC8234 card ports seated in slot 1. + * Top port is port 0. + * + * The following DTS assumes DIP SW5[1-3] = 000b. + */ + +&slot1 { + #include "fsl-sch-24801.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>; +}; + +&mscc_felix_port1 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>; +}; + +&mscc_felix_port2 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>; +}; + +&mscc_felix_port3 { + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi new file mode 100644 index 0000000000..7e483e656e --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW x3xx + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using a SCH-30841-R card with AQR412 quad PHY in slot 2. This + * is used for the 4 integrated ethernet switch in a multiplexes USXGMII set-up. + * + * We're including the normal .dsti file, not the reworked card .dtsi + * intentionally. We are using multiplexing of the 4 interfaces on a single + * lane and the rework doesn't actually disable any port. The rework is in fact + * needed, otherwise the PHY won't work with the default wiring on the QDS/PHY + * card. + */ +&slot2 { +#include "fsl-sch-30841.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + status = "okay"; + phy-mode = "usxgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>; +}; + +&mscc_felix_port1 { + status = "okay"; + phy-mode = "usxgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>; +}; + +&mscc_felix_port2 { + status = "okay"; + phy-mode = "usxgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; +}; + +&mscc_felix_port3 { + status = "okay"; + phy-mode = "usxgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi new file mode 100644 index 0000000000..49fffdb9cb --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW x5xx + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * This setup is using SCH-28021 cards with VSC8514 QSGMII PHY in slot 2. + * This is only available on LS1028A QDS boards with lane B rework. + */ +&slot2 { + #include "fsl-sch-28021.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + status = "okay"; + phy-mode = "qsgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>; +}; + +&mscc_felix_port1 { + status = "okay"; + phy-mode = "qsgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>; +}; + +&mscc_felix_port2 { + status = "okay"; + phy-mode = "qsgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>; +}; + +&mscc_felix_port3 { + status = "okay"; + phy-mode = "qsgmii"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi new file mode 100644 index 0000000000..8347462f4c --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 7777 + * + * Copyright 2019-2021 NXP Semiconductors + */ + +&slot2 { +#include "fsl-sch-30842.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port1 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi new file mode 100644 index 0000000000..6be3b5094c --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP LS1028A-QDS device tree fragment for RCW 7777 + * + * Copyright 2019-2021 NXP Semiconductors + */ + +&slot3 { +#include "fsl-sch-30842.dtsi" +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port2 { + status = "okay"; + phy-mode = "sgmii-2500"; + phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>; +}; diff --git a/arch/arm/dts/fsl-ls1028a-qds.dtsi b/arch/arm/dts/fsl-ls1028a-qds.dtsi index 6cdcce1b92..da89ff96e9 100644 --- a/arch/arm/dts/fsl-ls1028a-qds.dtsi +++ b/arch/arm/dts/fsl-ls1028a-qds.dtsi @@ -258,3 +258,6 @@ &mdio0 { status = "okay"; }; + +#include "fsl-ls1028a-qds-8xxx-sch-24801.dtsi" +#include "fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi" diff --git a/arch/arm/dts/fsl-sch-24801.dtsi b/arch/arm/dts/fsl-sch-24801.dtsi new file mode 100644 index 0000000000..304afdabc5 --- /dev/null +++ b/arch/arm/dts/fsl-sch-24801.dtsi @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Device tree fragment for RCW SCH-24801 card + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * SCH-24801 is a 4xSGMII add-on card used with various FSL QDS boards. + * It integrates a VSC8234 quad PHY which supports 4 SGMII interfaces. + * PHY addresses are 0x1c - 0x1f. + * On the card the first port is the top port (farthest from PEX connector). + */ +phy@1c { + reg = <0x1c>; +}; + +phy@1d { + reg = <0x1d>; +}; + +phy@1e { + reg = <0x1e>; +}; + +phy@1f { + reg = <0x1f>; +}; diff --git a/arch/arm/dts/fsl-sch-28021.dtsi b/arch/arm/dts/fsl-sch-28021.dtsi new file mode 100644 index 0000000000..584f3fa68c --- /dev/null +++ b/arch/arm/dts/fsl-sch-28021.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Device tree fragment for RCW SCH-28021 card + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * SCH-28021 is a QSGMII add-on card used with various FSL QDS boards. + * It integrates a VSC8514 quad PHY which supports 4 interfaces muxed on a + * single QSGMII lane. + * PHY addresses are 0x08 - 0x0b. + * On the card the first port is the top port (farthest from PEX connector). + */ +phy@08 { + reg = <0x08>; +}; + +phy@09 { + reg = <0x09>; +}; + +phy@0a { + reg = <0x0a>; +}; + +phy@0b { + reg = <0x0b>; +}; diff --git a/arch/arm/dts/fsl-sch-30841.dtsi b/arch/arm/dts/fsl-sch-30841.dtsi new file mode 100644 index 0000000000..ca437d1782 --- /dev/null +++ b/arch/arm/dts/fsl-sch-30841.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Device tree fragment for RCW SCH-30841 card + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * SCH-30841 is a 4 port add-on card used with various FSL QDS boards. + * It integrates a AQR412C quad PHY which supports 4 interfaces either muxed + * together on a single lane or mapped 1:1 to serdes lanes. + * It supports several protocols - SGMII, SGMII-2500, USXGMII, M-USX, XFI. + * PHY addresses are 0x00 - 0x03. + * On the card the first port is the bottom port (closest to PEX connector). + */ +phy@00 { + reg = <0x00>; + mdi-reversal = <1>; + smb-addr = <0x25>; +}; + +phy@01 { + reg = <0x01>; + mdi-reversal = <1>; + smb-addr = <0x26>; +}; + +phy@02 { + reg = <0x02>; + mdi-reversal = <1>; + smb-addr = <0x27>; +}; + +phy@03 { + reg = <0x03>; + mdi-reversal = <1>; + smb-addr = <0x28>; +}; diff --git a/arch/arm/dts/fsl-sch-30842.dtsi b/arch/arm/dts/fsl-sch-30842.dtsi new file mode 100644 index 0000000000..fa0f2cdb10 --- /dev/null +++ b/arch/arm/dts/fsl-sch-30842.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Device tree fragment for RCW SCH-30842 card + * + * Copyright 2019-2021 NXP Semiconductors + */ + +/* + * SCH-30842 is a single port add-on card used with various FSL QDS boards. + * It integrates a AQR112 PHY, which supports several protocols - SGMII, + * SGMII-2500, USXGMII, XFI. + * PHY address is 0x02. + */ +phy@02 { + reg = <0x02>; + mdi-reversal = <1>; + smb-addr = <0x25>; +}; diff --git a/arch/arm/dts/ls1021a-pg-wcom-seli8.dts b/arch/arm/dts/ls1021a-pg-wcom-seli8.dts new file mode 100644 index 0000000000..e335188bc6 --- /dev/null +++ b/arch/arm/dts/ls1021a-pg-wcom-seli8.dts @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2013-2015 Freescale Semiconductor, Inc. + * Copyright 2020 Hitachi Power Grids. All rights reserved. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "Hitachi-Powergrids SELI8 Service Unit for XMC and FOX"; + + chosen { + stdout-path = &uart0; + }; +}; + +&enet0 { + status = "okay"; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet1 { + status = "okay"; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&enet2 { + phy-handle = <&debug_phy>; + phy-connection-type = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR Flash on board */ + ranges = <0x0 0x0 0x60000000 0x04000000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "rcw"; + reg = <0x0 0x20000>; + read-only; + }; + partition@20000 { + label = "qe"; + reg = <0x20000 0x20000>; + }; + partition@40000 { + label = "envred"; + reg = <0x40000 0x20000>; + }; + partition@60000 { + label = "env"; + reg = <0x60000 0x20000>; + }; + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; + }; + partition@200000 { + label = "ubi0"; + reg = <0x200000 0x3E00000>; + }; + }; +}; + +&mdio0 { + debug_phy: ethernet-phy@11 { + reg = <0x11>; + }; + + tbi0: tbi-phy@0xb { + reg = <0xb>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + tbi1: tbi-phy@0xd { + reg = <0xd>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/powerpc/dts/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/dts/qoriq-fman3-1-10g-0.dtsi index 889c8d450e..65bb8a4b0b 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-10g-0.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-10g-0.dtsi @@ -30,7 +30,7 @@ fman@500000 { pcsphy-handle = <&pcsphy14>; }; - mdio@f1000 { + mdio@5f1000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/dts/qoriq-fman3-1-10g-1.dtsi index 2e45698337..eb39d29b39 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-10g-1.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-10g-1.dtsi @@ -30,7 +30,7 @@ fman@500000 { pcsphy-handle = <&pcsphy15>; }; - mdio@f3000 { + mdio@5f3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/dts/qoriq-fman3-1-1g-0.dtsi index b4ff19bf49..2f2209dbc9 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-1g-0.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-1g-0.dtsi @@ -29,7 +29,7 @@ fman@500000 { pcsphy-handle = <&pcsphy8>; }; - mdio@e1000 { + mdio@5e1000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/dts/qoriq-fman3-1-1g-1.dtsi index 239c56ad1f..11653c58b5 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-1g-1.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-1g-1.dtsi @@ -29,7 +29,7 @@ fman@500000 { pcsphy-handle = <&pcsphy9>; }; - mdio@e3000 { + mdio@5e3000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/dts/qoriq-fman3-1-1g-2.dtsi index 6e2bb009d9..ae27c7bc6d 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-1g-2.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-1g-2.dtsi @@ -29,7 +29,7 @@ fman@500000 { pcsphy-handle = <&pcsphy10>; }; - mdio@e5000 { + mdio@5e5000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/dts/qoriq-fman3-1-1g-3.dtsi index 29dd94ba74..55ae549917 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-1g-3.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-1g-3.dtsi @@ -29,7 +29,7 @@ fman@500000 { pcsphy-handle = <&pcsphy11>; }; - mdio@e7000 { + mdio@5e7000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/dts/qoriq-fman3-1-1g-4.dtsi index a5b4935827..833cf3e23d 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-1g-4.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-1g-4.dtsi @@ -29,7 +29,7 @@ fman@500000 { pcsphy-handle = <&pcsphy12>; }; - mdio@e9000 { + mdio@5e9000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/dts/qoriq-fman3-1-1g-5.dtsi index 486c84bf98..81da55dfbe 100644 --- a/arch/powerpc/dts/qoriq-fman3-1-1g-5.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1-1g-5.dtsi @@ -29,7 +29,7 @@ fman@500000 { pcsphy-handle = <&pcsphy13>; }; - mdio@eb000 { + mdio@5eb000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/qoriq-fman3-1.dtsi b/arch/powerpc/dts/qoriq-fman3-1.dtsi index d8609c3ecf..9efcf26c4a 100644 --- a/arch/powerpc/dts/qoriq-fman3-1.dtsi +++ b/arch/powerpc/dts/qoriq-fman3-1.dtsi @@ -61,14 +61,14 @@ fman1: fman@500000 { reg = <0x87000 0x1000>; }; - mdio1: mdio@fc000 { + mdio1: mdio@5fc000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; reg = <0xfc000 0x1000>; }; - mdio@fd000 { + mdio@5fd000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; diff --git a/arch/powerpc/dts/t1042d4rdb.dts b/arch/powerpc/dts/t1042d4rdb.dts index 3584c06aa8..5e9fab7a10 100644 --- a/arch/powerpc/dts/t1042d4rdb.dts +++ b/arch/powerpc/dts/t1042d4rdb.dts @@ -3,7 +3,7 @@ * T1042D4RDB Device Tree Source * * Copyright 2013 - 2015 Freescale Semiconductor Inc. - * Copyright 2019 NXP + * Copyright 2019-2021 NXP */ /include/ "t104x.dtsi" @@ -20,6 +20,57 @@ }; }; +&soc { + fman0: fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio0: mdio@fc000 { + phy_sgmii_0: ethernet-phy@2 { + reg = <0x02>; + }; + + phy_sgmii_1: ethernet-phy@3 { + reg = <0x03>; + }; + + phy_sgmii_2: ethernet-phy@1 { + reg = <0x01>; + }; + + phy_rgmii_0: ethernet-phy@4 { + reg = <0x04>; + }; + + phy_rgmii_1: ethernet-phy@5 { + reg = <0x05>; + }; + }; + }; +}; + &espi0 { status = "okay"; flash@0 { @@ -30,3 +81,5 @@ spi-max-frequency = <10000000>; /* input clock */ }; }; + +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/dts/t1042si-post.dtsi b/arch/powerpc/dts/t1042si-post.dtsi new file mode 100644 index 0000000000..5c60944e60 --- /dev/null +++ b/arch/powerpc/dts/t1042si-post.dtsi @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * T1042 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * Copyright 2021 NXP + * + */ +&soc { +/include/ "qoriq-clockgen2.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; +}; diff --git a/arch/powerpc/dts/t2080rdb.dts b/arch/powerpc/dts/t2080rdb.dts index 74bbb20e2a..25f8c978c6 100644 --- a/arch/powerpc/dts/t2080rdb.dts +++ b/arch/powerpc/dts/t2080rdb.dts @@ -3,7 +3,7 @@ * T2080RDB Device Tree Source * * Copyright 2013 - 2015 Freescale Semiconductor Inc. - * Copyright 2019 NXP + * Copyright 2019-2021 NXP */ /include/ "t2080.dtsi" @@ -20,6 +20,71 @@ }; }; +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&xg_aq1202_phy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@e2000 { + phy-handle = <&xg_aq1202_phy4>; + phy-connection-type = "xgmii"; + }; + + ethernet@e4000 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii"; + }; + + ethernet@e6000 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii"; + }; + + ethernet@f0000 { + phy-handle = <&xg_cs4315_phy2>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xg_cs4315_phy1>; + phy-connection-type = "xgmii"; + }; + + mdio@fc000 { + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + mdio@fd000 { + xg_cs4315_phy1: ethernet-phy@c { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0xc>; + }; + + xg_cs4315_phy2: ethernet-phy@d { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0xd>; + }; + + xg_aq1202_phy3: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + xg_aq1202_phy4: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + }; + }; +}; + &espi0 { status = "okay"; flash@0 { @@ -38,3 +103,5 @@ reg = <0x68>; }; }; + +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/dts/t2080si-post.dtsi b/arch/powerpc/dts/t2080si-post.dtsi new file mode 100644 index 0000000000..d8ef579cb7 --- /dev/null +++ b/arch/powerpc/dts/t2080si-post.dtsi @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * T2080 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * Copyright 2021 NXP + * + */ +&soc { + +/include/ "qoriq-clockgen2.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" + +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" +/include/ "qoriq-fman3-0-10g-1-best-effort.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; +}; diff --git a/arch/powerpc/dts/t4240rdb.dts b/arch/powerpc/dts/t4240rdb.dts index 635065a036..b3251e330d 100644 --- a/arch/powerpc/dts/t4240rdb.dts +++ b/arch/powerpc/dts/t4240rdb.dts @@ -3,7 +3,7 @@ * T4240RDB Device Tree Source * * Copyright 2013 - 2015 Freescale Semiconductor Inc. - * Copyright 2019 NXP + * Copyright 2019-2021 NXP */ /include/ "t4240.dtsi" @@ -20,6 +20,144 @@ }; }; +&soc { + fman@400000 { + ethernet@e0000 { + phy-handle = <&sgmiiphy21>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmiiphy22>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&sgmiiphy23>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&sgmiiphy24>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + status = "disabled"; + }; + + ethernet@f0000 { + phy-handle = <&xfiphy1>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xfiphy2>; + phy-connection-type = "xgmii"; + }; + }; + + fman@500000 { + ethernet@e0000 { + phy-handle = <&sgmiiphy41>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&sgmiiphy42>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&sgmiiphy43>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&sgmiiphy44>; + phy-connection-type = "sgmii"; + }; + + ethernet@e8000 { + status = "disabled"; + }; + + ethernet@ea000 { + status = "disabled"; + }; + + ethernet@f0000 { + phy-handle = <&xfiphy3>; + phy-connection-type = "xgmii"; + }; + + ethernet@f2000 { + phy-handle = <&xfiphy4>; + phy-connection-type = "xgmii"; + }; + + mdio@5fc000 { + sgmiiphy21: ethernet-phy@0 { + reg = <0x0>; + }; + + sgmiiphy22: ethernet-phy@1 { + reg = <0x1>; + }; + + sgmiiphy23: ethernet-phy@2 { + reg = <0x2>; + }; + + sgmiiphy24: ethernet-phy@3 { + reg = <0x3>; + }; + + sgmiiphy41: ethernet-phy@4 { + reg = <0x4>; + }; + + sgmiiphy42: ethernet-phy@5 { + reg = <0x5>; + }; + + sgmiiphy43: ethernet-phy@6 { + reg = <0x6>; + }; + + sgmiiphy44: ethernet-phy@7 { + reg = <0x7>; + }; + }; + + mdio@5fd000 { + xfiphy1: ethernet-phy@10 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x10>; + }; + + xfiphy2: ethernet-phy@11 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x11>; + }; + + xfiphy3: ethernet-phy@13 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x13>; + }; + + xfiphy4: ethernet-phy@12 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x12>; + }; + }; + }; +}; + &espi0 { status = "okay"; flash@0 { @@ -30,3 +168,5 @@ spi-max-frequency = <10000000>; /* input clock */ }; }; + +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/dts/t4240si-post.dtsi b/arch/powerpc/dts/t4240si-post.dtsi new file mode 100644 index 0000000000..a596f48b54 --- /dev/null +++ b/arch/powerpc/dts/t4240si-post.dtsi @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * T4240 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * Copyright 2021 NXP + * + */ +&soc { +/include/ "qoriq-clockgen2.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" + +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + status = "disabled"; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; + +/include/ "qoriq-fman3-1.dtsi" +/include/ "qoriq-fman3-1-1g-0.dtsi" +/include/ "qoriq-fman3-1-1g-1.dtsi" +/include/ "qoriq-fman3-1-1g-2.dtsi" +/include/ "qoriq-fman3-1-1g-3.dtsi" +/include/ "qoriq-fman3-1-1g-4.dtsi" +/include/ "qoriq-fman3-1-1g-5.dtsi" +/include/ "qoriq-fman3-1-10g-0.dtsi" +/include/ "qoriq-fman3-1-10g-1.dtsi" + fman@500000 { + enet8: ethernet@e0000 { + }; + + enet9: ethernet@e2000 { + }; + + enet10: ethernet@e4000 { + }; + + enet11: ethernet@e6000 { + }; + + enet12: ethernet@e8000 { + }; + + enet13: ethernet@ea000 { + }; + + enet14: ethernet@f0000 { + }; + + enet15: ethernet@f2000 { + }; + + mdio@5fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@5fd000 { + interrupts = <101 1 0 0>; + }; + }; +}; diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 8c4c2bfddd..dde4efb933 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -15,7 +15,9 @@ aliases { console = &uart0; eth0 = "/eth@10002000"; + eth2 = &swp_0; eth3 = ð_3; + eth4 = &dsa_eth0; eth5 = ð_5; gpio1 = &gpio_a; gpio2 = &gpio_b; @@ -478,6 +480,48 @@ fake-host-hwaddr = [00 00 66 44 22 22]; }; + dsa_eth0: dsa-test-eth { + compatible = "sandbox,eth"; + reg = <0x10006000 0x1000>; + fake-host-hwaddr = [00 00 66 44 22 66]; + }; + + dsa-test { + compatible = "sandbox,dsa"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + swp_0: port@0 { + reg = <0>; + label = "lan0"; + phy-mode = "rgmii-rxid"; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + swp_1: port@1 { + reg = <1>; + label = "lan1"; + phy-mode = "rgmii-txid"; + fixed-link = <0 1 100 0 0>; + }; + + port@2 { + reg = <2>; + ethernet = <&dsa_eth0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + firmware { sandbox_firmware: sandbox-firmware { compatible = "sandbox,firmware"; diff --git a/board/emulation/qemu-ppce500/Kconfig b/board/emulation/qemu-ppce500/Kconfig index 4312d986d8..1c5aa18aa9 100644 --- a/board/emulation/qemu-ppce500/Kconfig +++ b/board/emulation/qemu-ppce500/Kconfig @@ -9,4 +9,10 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "qemu-ppce500" +config PLATFORM_BUS_MAP_ADDR + hex + default 0xf0000000 + help + The QEMU platform bus base mapped address in the virtual memory space. + endif diff --git a/board/emulation/qemu-ppce500/qemu-ppce500.c b/board/emulation/qemu-ppce500/qemu-ppce500.c index daa103c564..924cc02c4b 100644 --- a/board/emulation/qemu-ppce500/qemu-ppce500.c +++ b/board/emulation/qemu-ppce500/qemu-ppce500.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include #include #include @@ -109,6 +111,17 @@ static int pci_map_region(phys_addr_t paddr, phys_size_t size, ulong *pmap_addr) return 0; } +static void platform_bus_map_region(ulong map_addr, phys_addr_t paddr, + phys_size_t size) +{ + /* Align map_addr */ + map_addr += size - 1; + map_addr &= ~(size - 1); + + /* Map virtual memory for range */ + assert(!tlb_map_range(map_addr, paddr, size, TLB_MAP_IO)); +} + int misc_init_r(void) { struct udevice *dev; @@ -148,6 +161,22 @@ int misc_init_r(void) */ disable_tlb(find_tlb_idx((void *)CONFIG_SYS_TMPVIRT, 1)); + /* + * Detect the presence of the platform bus node, and + * create a virtual memory mapping for it. + */ + for (ret = uclass_find_first_device(UCLASS_SIMPLE_BUS, &dev); + dev; + ret = uclass_find_next_device(&dev)) { + if (device_is_compatible(dev, "qemu,platform")) { + struct simple_bus_plat *plat = dev_get_uclass_plat(dev); + + platform_bus_map_region(CONFIG_PLATFORM_BUS_MAP_ADDR, + plat->target, plat->size); + break; + } + } + return 0; } diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index 4c3be42179..f0b441db63 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -41,7 +41,7 @@ DECLARE_GLOBAL_DATA_PTR; #define VERSION_MASK 0x00FF #define BANK_MASK 0x0001 -#define CONFIG_RESET 0x1 +#define CFG_RESET 0x1 #define INIT_RESET 0x1 #define CPLD_SET_MUX_SERDES 0x20 @@ -283,7 +283,7 @@ static void convert_serdes_mux(int type, int need_reset) if (need_reset == 1) { printf("Reset board to enable configuration\n"); - cpld_data->system_rst = CONFIG_RESET; + cpld_data->system_rst = CFG_RESET; } } @@ -612,7 +612,7 @@ static void convert_flash_bank(char bank) cpld_data->vbank = bank; printf("Reset board to enable configuration.\n"); - cpld_data->system_rst = CONFIG_RESET; + cpld_data->system_rst = CFG_RESET; } static int flash_bank_cmd(struct cmd_tbl *cmdtp, int flag, int argc, @@ -644,7 +644,7 @@ static int cpld_reset_cmd(struct cmd_tbl *cmdtp, int flag, int argc, if (argc > 2) return CMD_RET_USAGE; if ((argc == 1) || (strcmp(argv[1], "conf") == 0)) - cpld_data->system_rst = CONFIG_RESET; + cpld_data->system_rst = CFG_RESET; else if (strcmp(argv[1], "init") == 0) cpld_data->global_rst = INIT_RESET; else diff --git a/board/freescale/t208xrdb/eth_t208xrdb.c b/board/freescale/t208xrdb/eth_t208xrdb.c index e77f3f7146..b0ff4b1f37 100644 --- a/board/freescale/t208xrdb/eth_t208xrdb.c +++ b/board/freescale/t208xrdb/eth_t208xrdb.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2021 NXP * * Shengzhou Liu */ @@ -104,6 +105,40 @@ int board_eth_init(struct bd_info *bis) return pci_eth_init(bis); } +/* Disable the MAC5 and MAC6 "fsl,fman-memac" nodes and the two + * "fsl,dpa-ethernet" nodes that reference them. + */ +void fdt_fixup_board_fman_ethernet(void *fdt) +{ + int mac_off, eth_off, i; + char mac_path[2][42] = { + "/soc@ffe000000/fman@400000/ethernet@e8000", + "/soc@ffe000000/fman@400000/ethernet@ea000", + }; + u32 eth_ph; + + for (i = 0; i < 2; i++) { + /* Disable the MAC node */ + mac_off = fdt_path_offset(fdt, mac_path[i]); + if (mac_off < 0) + continue; + fdt_status_disabled(fdt, mac_off); + + /* Disable the fsl,dpa-ethernet node that points to the MAC. + * The fsl,fman-mac property refers to the MAC's phandle. + */ + eth_ph = fdt_get_phandle(fdt, mac_off); + if (eth_ph <= 0) + continue; + + eth_off = fdt_node_offset_by_prop_value(fdt, -1, "fsl,fman-mac", + ð_ph, + sizeof(eth_ph)); + if (eth_off >= 0) + fdt_status_disabled(fdt, eth_off); + } +} + void fdt_fixup_board_enet(void *fdt) { return; diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index a18459841c..7ccb205c64 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2009-2013 Freescale Semiconductor, Inc. + * Copyright 2021 NXP */ #include @@ -137,6 +138,8 @@ int ft_board_setup(void *blob, struct bd_info *bd) #ifdef CONFIG_SYS_DPAA_FMAN #ifndef CONFIG_DM_ETH fdt_fixup_fman_ethernet(blob); +#else + fdt_fixup_board_fman_ethernet(blob); #endif fdt_fixup_board_enet(blob); #endif diff --git a/board/freescale/t208xrdb/t208xrdb.h b/board/freescale/t208xrdb/t208xrdb.h index 22a496fb8c..cd0a9f44da 100644 --- a/board/freescale/t208xrdb/t208xrdb.h +++ b/board/freescale/t208xrdb/t208xrdb.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2021 NXP */ #ifndef __CORENET_DS_H__ @@ -8,5 +9,6 @@ void fdt_fixup_board_enet(void *blob); void pci_of_setup(void *blob, struct bd_info *bd); +void fdt_fixup_board_fman_ethernet(void *blob); #endif diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index 6b7377c200..86a667067d 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -20,8 +20,8 @@ config KM_PNVRAM config KM_PHRAM hex "Physical RAM" - default 0x17F000 if ARM - default 0x100000 if PPC + default 0x17F000 if ARM && !ARCH_LS1021A + default 0x100000 if PPC || ARCH_LS1021A depends on !ARCH_SOCFPGA help Start address of the physical RAM, which is the mounted /var folder. @@ -30,13 +30,14 @@ config KM_RESERVED_PRAM hex "Reserved RAM" default 0x801000 if ARCH_KIRKWOOD default 0x0 if MPC83xx - default 0x1000 if MPC85xx + default 0x1000 if MPC85xx || ARCH_LS1021A depends on !ARCH_SOCFPGA help Reserved physical RAM area at the end of memory for special purposes. config KM_CRAMFS_ADDR hex "CRAMFS Address" + default 0x83000000 if ARCH_LS1021A default 0x3000000 depends on !ARCH_SOCFPGA help @@ -44,16 +45,25 @@ config KM_CRAMFS_ADDR config KM_KERNEL_ADDR hex "Kernel Load Address" + default 0x82000000 if ARCH_LS1021A default 0x2000000 help Address where to load Linux kernel in RAM. config KM_FDT_ADDR hex "FDT Load Address" + default 0x82FC0000 if ARCH_LS1021A default 0x2FC0000 help Address where to load flattened device tree in RAM. +config SYS_PAX_BASE + hex "PAX IFC Base Address" + default 0x78000000 + depends on ARCH_LS1021A + help + IFC Base Address for PAXx FPGA. + config KM_CONSOLE_TTY string "KM Console" default "ttyS0" @@ -69,9 +79,9 @@ config KM_DEF_NETDEV config KM_COMMON_ETH_INIT bool "Common Ethernet Initialization" default y if ARCH_KIRKWOOD || MPC83xx - default n if MPC85xx || ARCH_SOCFPGA + default n if MPC85xx || ARCH_SOCFPGA || ARCH_LS1021A help - Use the Ethernet initialization implemented in common code, which + Use the Ethernet initialization implemented in common code that detects if a Piggy board is present. config PIGGY_MAC_ADDRESS_OFFSET @@ -90,7 +100,7 @@ config KM_MVEXTSW_ADDR config KM_IVM_BUS int "IVM I2C Bus" default 0 if ARCH_SOCFPGA - default 1 if ARCH_KIRKWOOD || MPC85xx + default 1 if ARCH_KIRKWOOD || MPC85xx || ARCH_LS1021A default 2 if MPC83xx help Identifier number of I2C bus, where the inventory EEPROM is connected to. @@ -117,6 +127,7 @@ source "board/keymile/km83xx/Kconfig" source "board/keymile/kmcent2/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/keymile/km_arm/Kconfig" +source "board/keymile/pg-wcom-ls102xa/Kconfig" endmenu diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index 9a3a856be0..14c70b9ad0 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -306,11 +306,7 @@ static int ivm_populate_env(unsigned char *buf, int len, int mac_address_offset) return 0; page2 = &buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2]; - if (!IS_ENABLED(CONFIG_KMTEGR1)) { - /* if an offset is defined, add it */ - process_mac(valbuf, page2, mac_address_offset, true); - env_set((char *)"ethaddr", (char *)valbuf); - } else { + if (IS_ENABLED(CONFIG_KMTEGR1)) { /* KMTEGR1 has a special setup. eth0 has no connection to the * outside and gets an locally administred MAC address, eth1 is * the debug interface and gets the official MAC address from @@ -320,6 +316,19 @@ static int ivm_populate_env(unsigned char *buf, int len, int mac_address_offset) env_set((char *)"ethaddr", (char *)valbuf); process_mac(valbuf, page2, mac_address_offset, true); env_set((char *)"eth1addr", (char *)valbuf); + } else if (IS_ENABLED(CONFIG_ARCH_LS1021A)) { + /* LS102xA has 1xRGMII for debug connection and + * 2xSGMII for back-plane mgmt connection + */ + process_mac(valbuf, page2, 1, true); + env_set((char *)"ethaddr", (char *)valbuf); + process_mac(valbuf, page2, 2, true); + env_set((char *)"eth1addr", (char *)valbuf); + process_mac(valbuf, page2, mac_address_offset, true); + env_set((char *)"eth2addr", (char *)valbuf); + } else { + process_mac(valbuf, page2, mac_address_offset, true); + env_set((char *)"ethaddr", (char *)valbuf); } if (IS_ENABLED(CONFIG_TARGET_KMCENT2)) { /* 3rd ethernet interface */ diff --git a/board/keymile/pg-wcom-ls102xa/Kconfig b/board/keymile/pg-wcom-ls102xa/Kconfig new file mode 100644 index 0000000000..15c009dbe8 --- /dev/null +++ b/board/keymile/pg-wcom-ls102xa/Kconfig @@ -0,0 +1,19 @@ +if TARGET_PG_WCOM_SELI8 + +config SYS_BOARD + default "pg-wcom-ls102xa" + +config SYS_VENDOR + default "keymile" + +config SYS_SOC + default "ls102xa" + +config SYS_CONFIG_NAME + default "pg-wcom-seli8" + +config BOARD_SPECIFIC_OPTIONS + def_bool y + imply FS_CRAMFS + +endif diff --git a/board/keymile/pg-wcom-ls102xa/MAINTAINERS b/board/keymile/pg-wcom-ls102xa/MAINTAINERS new file mode 100644 index 0000000000..e1bc90a7e6 --- /dev/null +++ b/board/keymile/pg-wcom-ls102xa/MAINTAINERS @@ -0,0 +1,10 @@ +Hitachi Power Grids LS102XA BOARD +M: Aleksandar Gerasimovski +M: Rainer Boschung +M: Matteo Ghidoni +S: Maintained +F: board/keymile/pg-wcom-ls102xa/ +F: include/configs/km/pg-wcom-ls102xa.h +F: include/configs/pg-wcom-seli8.h +F: configs/pg_wcom_seli8_defconfig +F: arch/arm/dts/ls1021a-pg-wcom-seli8.dts diff --git a/board/keymile/pg-wcom-ls102xa/Makefile b/board/keymile/pg-wcom-ls102xa/Makefile new file mode 100644 index 0000000000..229b0c2827 --- /dev/null +++ b/board/keymile/pg-wcom-ls102xa/Makefile @@ -0,0 +1,11 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright 2021 Hitachi Power Grids. All rights reserved. +# + +obj-y += pg-wcom-ls102xa.o ddr.o +obj-y += ../common/common.o ../common/ivm.o ../common/qrio.o +obj-$(CONFIG_LAYERSCAPE_NS_ACCESS) += ../../freescale/common/ns_access.o +obj-$(CONFIG_LS102XA_STREAM_ID) += ../../freescale/common/ls102xa_stream_id.o +obj-$(CONFIG_ID_EEPROM) += ../../freescale/common/sys_eeprom.o diff --git a/board/keymile/pg-wcom-ls102xa/ddr.c b/board/keymile/pg-wcom-ls102xa/ddr.c new file mode 100644 index 0000000000..4ec60f1685 --- /dev/null +++ b/board/keymile/pg-wcom-ls102xa/ddr.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * Copyright 2020 Hitachi Power Grids. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + if (ctrl_num > 1) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + + // 1/2 DRAM cycle (should be increased in case of ADDR/CMD heavily loaded than the clock) + popts->clk_adjust = 0x4; + popts->write_data_delay = 0x4; + // wr leveling start value for lane 0 + popts->wrlvl_start = 0x5; + // wr leveling start values for lanes 1-3 (lane 4 not there) + popts->wrlvl_ctl_2 = 0x05050500; + // 32-bit DRAM, no need to set start values for lanes we do not have (5-8) + popts->wrlvl_ctl_3 = 0x0; + popts->cpo_override = 0x1f; + + /* force DDR bus width to 32 bits */ + popts->data_bus_width = 1; + popts->otf_burst_chop_en = 0; + popts->burst_length = DDR_BL8; + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 1; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + popts->cswl_override = DDR_CSWL_CS0; + + /* optimize cpo for erratum A-009942 */ + popts->cpo_sample = 0x58; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +int fsl_initdram(void) +{ + phys_size_t dram_size; + + puts("Initializing DDR....using SPD\n"); + dram_size = fsl_ddr_sdram(); + + erratum_a008850_post(); + + gd->ram_size = dram_size; + + return 0; +} + +int dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = gd->ram_size; + + return 0; +} diff --git a/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c new file mode 100644 index 0000000000..6b0e9631b3 --- /dev/null +++ b/board/keymile/pg-wcom-ls102xa/pg-wcom-ls102xa.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Hitachi Power Grids. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../common/common.h" +#include "../common/qrio.h" + +DECLARE_GLOBAL_DATA_PTR; + +static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN]; + +int checkboard(void) +{ + show_qrio(); + + return 0; +} + +int dram_init(void) +{ + return fsl_initdram(); +} + +int board_early_init_f(void) +{ + struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; + struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; + struct fsl_ifc ifc = {(void *)CONFIG_SYS_IFC_ADDR, (void *)NULL}; + + /* Disable unused MCK1 */ + setbits_be32(&gur->ddrclkdr, 2); + + /* IFC Global Configuration */ + setbits_be32(&ifc.gregs->ifc_gcr, 12 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + setbits_be32(&ifc.gregs->ifc_ccr, IFC_CCR_CLK_DIV(3) | + IFC_CCR_INV_CLK_EN); + + /* clear BD & FR bits for BE BD's and frame data */ + clrbits_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); + + init_early_memctl_regs(); + + /* QRIO Configuration */ + qrio_uprstreq(UPREQ_CORE_RST); + + if (IS_ENABLED(CONFIG_TARGET_PG_WCOM_SELI8)) { + qrio_prstcfg(KM_LIU_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_LIU_RST, true); + + qrio_prstcfg(KM_PAXK_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_wdmask(KM_PAXK_RST, true); + + qrio_prstcfg(KM_DBG_ETH_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + qrio_prst(KM_DBG_ETH_RST, false, false); + } + + i2c_deblock_gpio_cfg(); + + arch_soc_init(); + + return 0; +} + +int board_init(void) +{ + if (IS_ENABLED(CONFIG_SYS_FSL_ERRATUM_A010315)) + erratum_a010315(); + + fsl_serdes_init(); + + ls102xa_smmu_stream_id_init(); + + u_qe_init(); + + return 0; +} + +int board_late_init(void) +{ + return 0; +} + +int misc_init_r(void) +{ + if (IS_ENABLED(CONFIG_FSL_DEVICE_DISABLE)) + device_disable(devdis_tbl, ARRAY_SIZE(devdis_tbl)); + + ivm_read_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN, + CONFIG_PIGGY_MAC_ADDRESS_OFFSET); + + return 0; +} + +int ft_board_setup(void *blob, struct bd_info *bd) +{ + ft_cpu_setup(blob, bd); + + if (IS_ENABLED(CONFIG_PCI)) + ft_pci_setup(blob, bd); + + return 0; +} + +u8 flash_read8(void *addr) +{ + return __raw_readb(addr + 1); +} + +void flash_write16(u16 val, void *addr) +{ + u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00)); + + __raw_writew(shftval, addr); +} + +u16 flash_read16(void *addr) +{ + u16 val = __raw_readw(addr); + + return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); +} + +int hush_init_var(void) +{ + ivm_analyze_eeprom(ivm_content, CONFIG_SYS_IVM_EEPROM_MAX_LEN); + return 0; +} + +int last_stage_init(void) +{ + set_km_env(); + return 0; +} diff --git a/board/kontron/sl28/Kconfig b/board/kontron/sl28/Kconfig index 4078ef186b..abcacc3185 100644 --- a/board/kontron/sl28/Kconfig +++ b/board/kontron/sl28/Kconfig @@ -48,4 +48,14 @@ config SL28_BL32_ENTRY_ADDR endif +config SL28_ENABLE_SER0_CONSOLE + bool "Enable console output on SER0" + select DM_SERIAL + select SPL_DM_SERIAL + select FSL_LPUART + help + By default the console output of this board is on the second serial + line (SER1). Sometimes it is desirable to enable output on the first + serial line (SER0). For example, if you have a carrier which only + supports the first serial port. endif diff --git a/board/kontron/sl28/Makefile b/board/kontron/sl28/Makefile index 147ef9872b..5d220f0744 100644 --- a/board/kontron/sl28/Makefile +++ b/board/kontron/sl28/Makefile @@ -4,7 +4,7 @@ ifndef CONFIG_SPL_BUILD obj-y += sl28.o cmds.o endif -obj-y += ddr.o +obj-y += common.o ddr.o ifdef CONFIG_SPL_BUILD obj-y += spl.o diff --git a/board/kontron/sl28/common.c b/board/kontron/sl28/common.c new file mode 100644 index 0000000000..33c6843c3f --- /dev/null +++ b/board/kontron/sl28/common.c @@ -0,0 +1,11 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +u32 get_lpuart_clk(void) +{ + return gd->bus_clk / CONFIG_SYS_FSL_LPUART_CLK_DIV; +} diff --git a/configs/T1042D4RDB_NAND_defconfig b/configs/T1042D4RDB_NAND_defconfig index bdfd0ef71b..54bcc2f082 100644 --- a/configs/T1042D4RDB_NAND_defconfig +++ b/configs/T1042D4RDB_NAND_defconfig @@ -33,6 +33,7 @@ CONFIG_SPL_NAND_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -66,6 +67,8 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/T1042D4RDB_SDCARD_defconfig b/configs/T1042D4RDB_SDCARD_defconfig index 9094327ede..853a3d65ae 100644 --- a/configs/T1042D4RDB_SDCARD_defconfig +++ b/configs/T1042D4RDB_SDCARD_defconfig @@ -31,6 +31,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -63,6 +64,8 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/T1042D4RDB_SECURE_BOOT_defconfig b/configs/T1042D4RDB_SECURE_BOOT_defconfig index ef097bab89..bca800f5ae 100644 --- a/configs/T1042D4RDB_SECURE_BOOT_defconfig +++ b/configs/T1042D4RDB_SECURE_BOOT_defconfig @@ -2,8 +2,10 @@ CONFIG_PPC=y CONFIG_SYS_TEXT_BASE=0xEFF40000 CONFIG_ENV_SIZE=0x2000 CONFIG_NXP_ESBC=y +CONFIG_DEFAULT_DEVICE_TREE="t1042d4rdb" CONFIG_MPC85xx=y CONFIG_TARGET_T1042D4RDB=y +CONFIG_MPC85XX_HAVE_RESET_VECTOR=y # CONFIG_SYS_MALLOC_F is not set CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -17,6 +19,7 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_SF=y @@ -29,6 +32,7 @@ CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:2m(uboot),9m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:2m(uboot),9m(kernel),128k(dtb),-(user)" +CONFIG_OF_CONTROL=y CONFIG_ENV_OVERWRITE=y CONFIG_DM=y CONFIG_FSL_ESDHC=y @@ -45,8 +49,9 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y -CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_MII=y CONFIG_SYS_QE_FMAN_FW_IN_NOR=y @@ -60,4 +65,3 @@ CONFIG_SYS_NUM_ADDR_MAP=64 CONFIG_RSA=y CONFIG_SPL_RSA=y CONFIG_RSA_SOFTWARE_EXP=y -CONFIG_OF_LIBFDT=y diff --git a/configs/T1042D4RDB_SPIFLASH_defconfig b/configs/T1042D4RDB_SPIFLASH_defconfig index bc59866b55..cef5295748 100644 --- a/configs/T1042D4RDB_SPIFLASH_defconfig +++ b/configs/T1042D4RDB_SPIFLASH_defconfig @@ -33,6 +33,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -65,6 +66,8 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/T1042D4RDB_defconfig b/configs/T1042D4RDB_defconfig index f968a448e9..85e2beab02 100644 --- a/configs/T1042D4RDB_defconfig +++ b/configs/T1042D4RDB_defconfig @@ -18,6 +18,7 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -51,6 +52,8 @@ CONFIG_SPI_FLASH_STMICRO=y CONFIG_PHYLIB=y CONFIG_PHY_REALTEK=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/T2080RDB_NAND_defconfig b/configs/T2080RDB_NAND_defconfig index 543d34e249..3bb74335bb 100644 --- a/configs/T2080RDB_NAND_defconfig +++ b/configs/T2080RDB_NAND_defconfig @@ -33,6 +33,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -70,6 +71,8 @@ CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y CONFIG_SYS_CORTINA_FW_IN_NAND=y CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_MII=y diff --git a/configs/T2080RDB_SDCARD_defconfig b/configs/T2080RDB_SDCARD_defconfig index d947846e64..bcd67a0576 100644 --- a/configs/T2080RDB_SDCARD_defconfig +++ b/configs/T2080RDB_SDCARD_defconfig @@ -31,6 +31,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -67,6 +68,8 @@ CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y CONFIG_SYS_CORTINA_FW_IN_MMC=y CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_MII=y diff --git a/configs/T2080RDB_SPIFLASH_defconfig b/configs/T2080RDB_SPIFLASH_defconfig index 6f7b083bc6..198e926c32 100644 --- a/configs/T2080RDB_SPIFLASH_defconfig +++ b/configs/T2080RDB_SPIFLASH_defconfig @@ -33,6 +33,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -69,6 +70,8 @@ CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y CONFIG_SYS_CORTINA_FW_IN_SPIFLASH=y CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_MII=y diff --git a/configs/T2080RDB_defconfig b/configs/T2080RDB_defconfig index 9dd01bbe50..12aaccd1d5 100644 --- a/configs/T2080RDB_defconfig +++ b/configs/T2080RDB_defconfig @@ -18,6 +18,7 @@ CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -54,6 +55,8 @@ CONFIG_PHYLIB=y CONFIG_PHY_AQUANTIA=y CONFIG_PHY_CORTINA=y CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y CONFIG_FMAN_ENET=y CONFIG_MII=y diff --git a/configs/T4240RDB_SDCARD_defconfig b/configs/T4240RDB_SDCARD_defconfig index 61670fa3d1..2def90140f 100644 --- a/configs/T4240RDB_SDCARD_defconfig +++ b/configs/T4240RDB_SDCARD_defconfig @@ -28,6 +28,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -59,6 +60,8 @@ CONFIG_PHYLIB_10G=y CONFIG_PHY_CORTINA=y CONFIG_PHY_TERANETICS=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/T4240RDB_defconfig b/configs/T4240RDB_defconfig index 2c8a2f0ef2..8a0c122833 100644 --- a/configs/T4240RDB_defconfig +++ b/configs/T4240RDB_defconfig @@ -15,6 +15,7 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y CONFIG_CMD_IMLS=y CONFIG_CMD_GREPENV=y +CONFIG_CMD_DM=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y @@ -47,6 +48,8 @@ CONFIG_PHYLIB_10G=y CONFIG_PHY_CORTINA=y CONFIG_PHY_TERANETICS=y CONFIG_PHY_VITESSE=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_FMAN_ENET=y diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 1c781e091c..98718db5c2 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -8,8 +8,6 @@ CONFIG_ENV_SIZE=0x2000 CONFIG_ENV_OFFSET=0x3e0000 CONFIG_ENV_SECT_SIZE=0x10000 CONFIG_SYS_SPI_U_BOOT_OFFS=0x230000 -CONFIG_DM_GPIO=y -CONFIG_SPL_DM_SPI=y CONFIG_SPL_TEXT_BASE=0x18010000 CONFIG_SYS_FSL_SDHC_CLK_DIV=1 CONFIG_SPL_SERIAL_SUPPORT=y @@ -35,7 +33,6 @@ CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SEPARATE_BSS=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y -CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y @@ -58,52 +55,38 @@ CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y -CONFIG_DM=y -CONFIG_SPL_DM=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_SCSI_AHCI=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y CONFIG_SYS_FSL_DDR3=y -CONFIG_DM_I2C=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_DEFAULT_BUS_NUMBER=0 CONFIG_I2C_MUX=y -CONFIG_DM_MMC=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC=y CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y -CONFIG_DM_SPI_FLASH=y # CONFIG_SPI_FLASH_UNLOCK_ALL is not set CONFIG_SPI_FLASH_WINBOND=y # CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y CONFIG_PHY_ATHEROS=y CONFIG_PHY_FIXED=y -CONFIG_DM_ETH=y -CONFIG_DM_MDIO=y CONFIG_DM_DSA=y CONFIG_PHY_GIGE=y CONFIG_E1000=y CONFIG_MSCC_FELIX_SWITCH=y CONFIG_NVME=y CONFIG_PCI=y -CONFIG_DM_PCI=y -CONFIG_DM_PCI_COMPAT=y CONFIG_PCIE_ECAM_GENERIC=y CONFIG_PCIE_LAYERSCAPE_RC=y -CONFIG_DM_RNG=y -CONFIG_DM_RTC=y CONFIG_RTC_RV8803=y CONFIG_SCSI=y -CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y -CONFIG_DM_SPI=y CONFIG_FSL_DSPI=y CONFIG_NXP_FSPI=y CONFIG_USB=y -CONFIG_DM_USB=y # CONFIG_SPL_DM_USB is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig new file mode 100644 index 0000000000..7d1a28a39e --- /dev/null +++ b/configs/pg_wcom_seli8_defconfig @@ -0,0 +1,70 @@ +CONFIG_ARM=y +CONFIG_TARGET_PG_WCOM_SELI8=y +CONFIG_SYS_TEXT_BASE=0x60100000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_KM_DEF_NETDEV="eth2" +CONFIG_KM_COMMON_ETH_INIT=y +CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x9fffffff +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8" +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_SILENT_CONSOLE=y +CONFIG_MISC_INIT_R=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_CRAMFS=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" +CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),-(ubi0);68000000.flash:-(ubi1)" +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_ADDR=0x60060000 +CONFIG_ENV_ADDR_REDUND=0x60040000 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_SYS_FSL_DDR3=y +# CONFIG_MMC is not set +CONFIG_SYS_I2C_MXC=y +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_TSEC_ENET=y +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index 536fe7d6e1..a1b9ea56ca 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -27,15 +27,20 @@ CONFIG_OF_CONTROL=y CONFIG_OF_BOARD=y CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_SIMPLE_BUS_CORRECT_RANGE=y CONFIG_BLK=y CONFIG_HAVE_BLOCK_DEVICE=y CONFIG_MPC8XXX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_FSL=y # CONFIG_MMC is not set +CONFIG_PHY_FIXED=y CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_E1000=y +CONFIG_TSEC_ENET=y CONFIG_DM_PCI=y CONFIG_PCI_MPC85XX=y CONFIG_DM_RTC=y diff --git a/doc/board/emulation/qemu-ppce500.rst b/doc/board/emulation/qemu-ppce500.rst index 0a5c86c61a..5de0aaf55d 100644 --- a/doc/board/emulation/qemu-ppce500.rst +++ b/doc/board/emulation/qemu-ppce500.rst @@ -70,6 +70,11 @@ interface at PCI address 0.1.0, but we can switch that to an e1000 NIC by:: $ qemu-system-ppc -nographic -machine ppce500 -bios u-boot \ -nic tap,ifname=tap0,script=no,downscript=no,model=e1000 +The QEMU ppce500 machine can also dynamically instantiate an eTSEC device if +"-device eTSEC" is given to QEMU:: + + -netdev tap,ifname=tap0,script=no,downscript=no,id=net0 -device eTSEC,netdev=net0 + VirtIO BLK driver is also enabled to support booting from a disk image where a kernel image is stored. Append the following to QEMU:: diff --git a/doc/device-tree-bindings/net/fixed-link.txt b/doc/device-tree-bindings/net/fixed-link.txt index 5829bd81a2..5efeeb6fc5 100644 --- a/doc/device-tree-bindings/net/fixed-link.txt +++ b/doc/device-tree-bindings/net/fixed-link.txt @@ -5,21 +5,37 @@ Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link". -Such a fixed link situation is described by creating a 'fixed-link' -sub-node of the Ethernet MAC device node, with the following -properties: +Note there are two ways to describe a fixed PHY attached to an +Ethernet device: -* 'speed' (integer, mandatory), to indicate the link speed. Accepted - values are 10, 100 and 1000 -* 'full-duplex' (boolean, optional), to indicate that full duplex is - used. When absent, half duplex is assumed. -* 'pause' (boolean, optional), to indicate that pause should be - enabled. -* 'asym-pause' (boolean, optional), to indicate that asym_pause should - be enabled. +- The new DT binding, where 'fixed-link' is a sub-node of the Ethernet + MAC device node, with the following properties: + + * 'speed' (integer, mandatory), to indicate the link speed. Accepted + values are 10, 100 and 1000 + * 'full-duplex' (boolean, optional), to indicate that full duplex is + used. When absent, half duplex is assumed. + * 'pause' (boolean, optional), to indicate that pause should be + enabled. + * 'asym-pause' (boolean, optional), to indicate that asym_pause should + be enabled. + +- The old DT binding, where 'fixed-link' is a property with 5 cells + encoding various information about the fixed PHY, in the form of + . + + * 'phy_id', emulated PHY ID, choose any but unique to the all specified + fixed-links. Note U-Boot deliberately ignores the 'phy_id' and + unconditionally uses PHY_FIXED_ID. + * 'full-duplex', 0 for half duplex or 1 for full duplex + * 'speed', link speed in Mbits/sec, accepts only 10, 100 and 1000 + * 'pause', 0 for no pause, 1 for pause + * 'asym-pause', 0 for no asymmetric pause, 1 for asymmetric pause Examples: +The new binding: + ethernet@0 { ... fixed-link { @@ -28,3 +44,11 @@ ethernet@0 { }; ... }; + +The old binding: + +ethernet@0 { + ... + fixed-link = <0 1 1000 0 0>; + ... +}; diff --git a/doc/device-tree-bindings/net/fsl-tsec-phy.txt b/doc/device-tree-bindings/net/fsl-tsec-phy.txt index a44c5fd9d9..f68980352b 100644 --- a/doc/device-tree-bindings/net/fsl-tsec-phy.txt +++ b/doc/device-tree-bindings/net/fsl-tsec-phy.txt @@ -3,12 +3,17 @@ Properties: - compatible : Should be "fsl,etsec2" or "gianfar" - - reg : Offset and length of the register set for the device + - reg : Offset and length of the register set for the device. If this is + missing, a subnode with a name prefix "queue-group" must be provided to + provide the property. - phy-handle : See ethernet.txt file in the same directory. - phy-connection-type : See ethernet.txt file in the same directory. This property is only really needed if the connection is of type "rgmii-id", "rgmii-rxid" and "rgmii-txid" as all other connection types are detected by hardware. + - ranges : an value if subnode "queue-group" is present, specifying + that no address translation is required between them TSEC parent node and + the child "queue-group" node. Example: ethernet@24000 { @@ -18,6 +23,18 @@ Example: phy-connection-type = "sgmii"; }; +An alternate description with "queue-group" subnode example: + ethernet@24000 { + compatible = "fsl,etsec2"; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + ranges; + + queue-group { + reg = <0x24000 0x1000>; + }; + }; + Child nodes of the TSEC controller are typically the individual PHY devices connected via the MDIO bus (sometimes the MDIO bus controller is separate). diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index 1eccac28c6..a7c3120860 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -235,6 +235,20 @@ config SPL_SIMPLE_BUS Supports the 'simple-bus' driver, which is used on some systems in SPL. +config SIMPLE_BUS_CORRECT_RANGE + bool "Decode the 'simple-bus' by honoring the #address-cells and #size-cells" + depends on SIMPLE_BUS + default y if SANDBOX + help + Decoding the 'simple-bus' by honoring the #address-cells + and #size-cells of parent/child bus. If unset, #address-cells of + parent bus is assumed to be 1, #address-cells and #size-cells of + child bus is also assumed to be 1, to save some spaces of using + an advanced API to decode the , which benefits SPL image + builds that have size limits. + + If you are unsure about this, Say N here. + config SIMPLE_PM_BUS bool "Support simple-pm-bus driver" depends on DM && OF_CONTROL && CLK && POWER_DOMAIN diff --git a/drivers/core/of_extra.c b/drivers/core/of_extra.c index 653344529e..7702beff97 100644 --- a/drivers/core/of_extra.c +++ b/drivers/core/of_extra.c @@ -130,3 +130,26 @@ int ofnode_decode_memory_region(ofnode config_node, const char *mem_type, return 0; } + +bool ofnode_phy_is_fixed_link(ofnode eth_node, ofnode *phy_node) +{ + ofnode node, subnode; + int len; + + subnode = ofnode_find_subnode(eth_node, "fixed-link"); + if (ofnode_valid(subnode)) { + /* new binding */ + node = subnode; + } else if (ofnode_get_property(eth_node, "fixed-link", &len) && + len == (5 * sizeof(__be32))) { + /* old binding */ + node = eth_node; + } else { + return false; + } + + if (phy_node) + *phy_node = node; + + return true; +} diff --git a/drivers/core/simple-bus.c b/drivers/core/simple-bus.c index b0c2c20958..18f52d26df 100644 --- a/drivers/core/simple-bus.c +++ b/drivers/core/simple-bus.c @@ -4,8 +4,12 @@ */ #include +#include #include #include +#include + +DECLARE_GLOBAL_DATA_PTR; fdt_addr_t simple_bus_translate(struct udevice *dev, fdt_addr_t addr) { @@ -22,16 +26,30 @@ static int simple_bus_post_bind(struct udevice *dev) #if CONFIG_IS_ENABLED(OF_PLATDATA) return 0; #else - u32 cell[3]; + struct simple_bus_plat *plat = dev_get_uclass_plat(dev); int ret; - ret = dev_read_u32_array(dev, "ranges", cell, ARRAY_SIZE(cell)); - if (!ret) { - struct simple_bus_plat *plat = dev_get_uclass_plat(dev); + if (CONFIG_IS_ENABLED(SIMPLE_BUS_CORRECT_RANGE)) { + uint64_t caddr, paddr, len; - plat->base = cell[0]; - plat->target = cell[1]; - plat->size = cell[2]; + /* only read range index 0 */ + ret = fdt_read_range((void *)gd->fdt_blob, dev_of_offset(dev), + 0, &caddr, &paddr, &len); + if (!ret) { + plat->base = caddr; + plat->target = paddr; + plat->size = len; + } + } else { + u32 cell[3]; + + ret = dev_read_u32_array(dev, "ranges", cell, + ARRAY_SIZE(cell)); + if (!ret) { + plat->base = cell[0]; + plat->target = cell[1]; + plat->size = cell[2]; + } } return dm_scan_fdt_dev(dev); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 54f7b81624..72822eaec4 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -78,6 +78,15 @@ config DM_ETH_PHY help Enable driver model for Ethernet Generic PHY . +config DSA_SANDBOX + depends on DM_DSA && SANDBOX + default y + bool "Sandbox: Mocked DSA driver" + help + This driver implements a dummy DSA switch connected to a dummy sandbox + Ethernet device used as DSA master, to test DSA class code, including + exported DSA API and datapath processing of Ethernet traffic. + menuconfig NETDEVICES bool "Network device support" depends on NET diff --git a/drivers/net/Makefile b/drivers/net/Makefile index ce7b9e3478..2ce89f7e3c 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_ETH_DESIGNWARE_SOCFPGA) += dwmac_socfpga.o obj-$(CONFIG_ETH_DESIGNWARE_S700) += dwmac_s700.o obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o obj-$(CONFIG_DNET) += dnet.o +obj-$(CONFIG_DSA_SANDBOX) += dsa_sandbox.o obj-$(CONFIG_DM_ETH_PHY) += eth-phy-uclass.o obj-$(CONFIG_E1000) += e1000.o obj-$(CONFIG_E1000_SPI) += e1000_spi.o diff --git a/drivers/net/dsa_sandbox.c b/drivers/net/dsa_sandbox.c new file mode 100644 index 0000000000..4b62670e5d --- /dev/null +++ b/drivers/net/dsa_sandbox.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP Semiconductors + */ + +#include +#include +#include + +#define DSA_SANDBOX_MAGIC 0x00415344 +#define DSA_SANDBOX_TAG_LEN sizeof(struct dsa_sandbox_tag) + +struct dsa_sandbox_priv { + struct eth_sandbox_priv *master_priv; + int port_en_mask; +}; + +struct dsa_sandbox_tag { + u32 magic; + u32 port; +}; + +static bool sb_dsa_port_enabled(struct udevice *dev, int port) +{ + struct dsa_sandbox_priv *priv = dev_get_priv(dev); + + return priv->port_en_mask & BIT(port); +} + +static bool sb_dsa_master_enabled(struct udevice *dev) +{ + struct dsa_sandbox_priv *priv = dev_get_priv(dev); + + return !priv->master_priv->disabled; +} + +static int dsa_sandbox_port_enable(struct udevice *dev, int port, + struct phy_device *phy) +{ + struct dsa_sandbox_priv *priv = dev_get_priv(dev); + + if (!sb_dsa_master_enabled(dev)) + return -EFAULT; + + priv->port_en_mask |= BIT(port); + + return 0; +} + +static void dsa_sandbox_port_disable(struct udevice *dev, int port, + struct phy_device *phy) +{ + struct dsa_sandbox_priv *priv = dev_get_priv(dev); + + priv->port_en_mask &= ~BIT(port); +} + +static int dsa_sandbox_xmit(struct udevice *dev, int port, void *packet, + int length) +{ + struct dsa_sandbox_tag *tag = packet; + + if (!sb_dsa_master_enabled(dev)) + return -EFAULT; + + if (!sb_dsa_port_enabled(dev, port)) + return -EFAULT; + + tag->magic = DSA_SANDBOX_MAGIC; + tag->port = port; + + return 0; +} + +static int dsa_sandbox_rcv(struct udevice *dev, int *port, void *packet, + int length) +{ + struct dsa_sandbox_tag *tag = packet; + + if (!sb_dsa_master_enabled(dev)) + return -EFAULT; + + if (tag->magic != DSA_SANDBOX_MAGIC) + return -EFAULT; + + *port = tag->port; + if (!sb_dsa_port_enabled(dev, tag->port)) + return -EFAULT; + + return 0; +} + +static const struct dsa_ops dsa_sandbox_ops = { + .port_enable = dsa_sandbox_port_enable, + .port_disable = dsa_sandbox_port_disable, + .xmit = dsa_sandbox_xmit, + .rcv = dsa_sandbox_rcv, +}; + +static int sb_dsa_handler(struct udevice *dev, void *packet, + unsigned int len) +{ + struct eth_sandbox_priv *master_priv; + struct dsa_sandbox_tag *tag = packet; + struct udevice *dsa_dev; + u32 port_index; + void *rx_buf; + int i; + + /* this emulates the switch hw and the network side */ + if (tag->magic != DSA_SANDBOX_MAGIC) + return -EFAULT; + + port_index = tag->port; + master_priv = dev_get_priv(dev); + dsa_dev = master_priv->priv; + if (!sb_dsa_port_enabled(dsa_dev, port_index)) + return -EFAULT; + + packet += DSA_SANDBOX_TAG_LEN; + len -= DSA_SANDBOX_TAG_LEN; + + if (!sandbox_eth_arp_req_to_reply(dev, packet, len)) + goto dsa_tagging; + if (!sandbox_eth_ping_req_to_reply(dev, packet, len)) + goto dsa_tagging; + + return 0; + +dsa_tagging: + master_priv->recv_packets--; + i = master_priv->recv_packets; + rx_buf = master_priv->recv_packet_buffer[i]; + len = master_priv->recv_packet_length[i]; + memmove(rx_buf + DSA_SANDBOX_TAG_LEN, rx_buf, len); + + tag = rx_buf; + tag->magic = DSA_SANDBOX_MAGIC; + tag->port = port_index; + len += DSA_SANDBOX_TAG_LEN; + master_priv->recv_packet_length[i] = len; + master_priv->recv_packets++; + + return 0; +} + +static int dsa_sandbox_probe(struct udevice *dev) +{ + struct dsa_sandbox_priv *priv = dev_get_priv(dev); + struct udevice *master = dsa_get_master(dev); + struct eth_sandbox_priv *master_priv; + + if (!master) + return -ENODEV; + + dsa_set_tagging(dev, DSA_SANDBOX_TAG_LEN, 0); + + master_priv = dev_get_priv(master); + master_priv->priv = dev; + master_priv->tx_handler = sb_dsa_handler; + + priv->master_priv = master_priv; + + return 0; +} + +static const struct udevice_id dsa_sandbox_ids[] = { + { .compatible = "sandbox,dsa" }, + { } +}; + +U_BOOT_DRIVER(dsa_sandbox) = { + .name = "dsa_sandbox", + .id = UCLASS_DSA, + .of_match = dsa_sandbox_ids, + .probe = dsa_sandbox_probe, + .ops = &dsa_sandbox_ops, + .priv_auto = sizeof(struct dsa_sandbox_priv), +}; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index d69503067d..070ffa82cb 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -292,6 +292,7 @@ config PHY_XILINX config PHY_XILINX_GMII2RGMII bool "Xilinx GMII to RGMII Ethernet PHYs support" + depends on DM_ETH help This adds support for Xilinx GMII to RGMII IP core. This IP acts as bridge between MAC connected over GMII and external phy that diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c index 1a38c29469..1192915ee5 100644 --- a/drivers/net/phy/fixed.c +++ b/drivers/net/phy/fixed.c @@ -15,18 +15,42 @@ DECLARE_GLOBAL_DATA_PTR; -int fixedphy_probe(struct phy_device *phydev) +static int fixedphy_probe(struct phy_device *phydev) { + /* fixed-link phy must not be reset by core phy code */ + phydev->flags |= PHY_FLAG_BROKEN_RESET; + + return 0; +} + +static int fixedphy_config(struct phy_device *phydev) +{ + ofnode node = phy_get_ofnode(phydev); struct fixed_link *priv; - int ofnode = phydev->addr; + bool old_binding = false; + u32 old_val[5]; u32 val; + if (!ofnode_valid(node)) + return -EINVAL; + /* check for mandatory properties within fixed-link node */ - val = fdt_getprop_u32_default_node(gd->fdt_blob, - ofnode, 0, "speed", 0); + val = ofnode_read_u32_default(node, "speed", 0); + + if (!val) { + /* try old binding */ + old_binding = true; + if (ofnode_read_u32_array(node, "fixed-link", old_val, + ARRAY_SIZE(old_val))) { + printf("ERROR: no/invalid property!\n"); + return -ENOENT; + } + val = old_val[2]; + } + if (val != SPEED_10 && val != SPEED_100 && val != SPEED_1000 && val != SPEED_2500 && val != SPEED_10000) { - printf("ERROR: no/invalid speed given in fixed-link node!"); + printf("ERROR: no/invalid speed given in fixed-link node!\n"); return -EINVAL; } @@ -38,17 +62,20 @@ int fixedphy_probe(struct phy_device *phydev) phydev->priv = priv; priv->link_speed = val; - priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex"); - priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause"); - priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause"); - - /* fixed-link phy must not be reset by core phy code */ - phydev->flags |= PHY_FLAG_BROKEN_RESET; + if (!old_binding) { + priv->duplex = ofnode_read_bool(node, "full-duplex"); + priv->pause = ofnode_read_bool(node, "pause"); + priv->asym_pause = ofnode_read_bool(node, "asym-pause"); + } else { + priv->duplex = old_val[1]; + priv->pause = old_val[3]; + priv->asym_pause = old_val[4]; + } return 0; } -int fixedphy_startup(struct phy_device *phydev) +static int fixedphy_startup(struct phy_device *phydev) { struct fixed_link *priv = phydev->priv; @@ -61,7 +88,7 @@ int fixedphy_startup(struct phy_device *phydev) return 0; } -int fixedphy_shutdown(struct phy_device *phydev) +static int fixedphy_shutdown(struct phy_device *phydev) { return 0; } @@ -72,6 +99,7 @@ static struct phy_driver fixedphy_driver = { .name = "Fixed PHY", .features = PHY_GBIT_FEATURES | SUPPORTED_MII, .probe = fixedphy_probe, + .config = fixedphy_config, .startup = fixedphy_startup, .shutdown = fixedphy_shutdown, }; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 89e3076bfd..dcdef9e661 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -942,34 +943,25 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev) } #ifdef CONFIG_PHY_XILINX_GMII2RGMII -#ifdef CONFIG_DM_ETH static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, struct udevice *dev, phy_interface_t interface) -#else -static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, - struct eth_device *dev, - phy_interface_t interface) -#endif { struct phy_device *phydev = NULL; - int sn = dev_of_offset(dev); - int off; + ofnode node = dev_ofnode(dev); - while (sn > 0) { - off = fdt_node_offset_by_compatible(gd->fdt_blob, sn, - "xlnx,gmii-to-rgmii-1.0"); - if (off > 0) { - phydev = phy_device_create(bus, off, + while (ofnode_valid(node)) { + node = ofnode_by_compatible(node, "xlnx,gmii-to-rgmii-1.0"); + if (ofnode_valid(node)) { + phydev = phy_device_create(bus, 0, PHY_GMII2RGMII_ID, false, interface); + if (phydev) + phydev->node = node; break; } - if (off == -FDT_ERR_NOTFOUND) - sn = fdt_first_subnode(gd->fdt_blob, sn); - else - printf("%s: Error finding compat string:%d\n", - __func__, off); + + node = ofnode_first_subnode(node); } return phydev; @@ -988,6 +980,7 @@ static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, struct phy_device *fixed_phy_create(ofnode node) { phy_interface_t interface = PHY_INTERFACE_MODE_NONE; + struct phy_device *phydev; const char *if_str; ofnode subnode; @@ -1004,33 +997,25 @@ struct phy_device *fixed_phy_create(ofnode node) return NULL; } - return phy_device_create(NULL, ofnode_to_offset(subnode), PHY_FIXED_ID, - false, interface); + phydev = phy_device_create(NULL, 0, PHY_FIXED_ID, false, interface); + if (phydev) + phydev->node = subnode; + + return phydev; } -#ifdef CONFIG_DM_ETH static struct phy_device *phy_connect_fixed(struct mii_dev *bus, struct udevice *dev, phy_interface_t interface) -#else -static struct phy_device *phy_connect_fixed(struct mii_dev *bus, - struct eth_device *dev, - phy_interface_t interface) -#endif { + ofnode node = dev_ofnode(dev), subnode; struct phy_device *phydev = NULL; - int sn; - const char *name; - sn = fdt_first_subnode(gd->fdt_blob, dev_of_offset(dev)); - while (sn > 0) { - name = fdt_get_name(gd->fdt_blob, sn, NULL); - if (name && strcmp(name, "fixed-link") == 0) { - phydev = phy_device_create(bus, sn, PHY_FIXED_ID, false, - interface); - break; - } - sn = fdt_next_subnode(gd->fdt_blob, sn); + if (ofnode_phy_is_fixed_link(node, &subnode)) { + phydev = phy_device_create(bus, 0, PHY_FIXED_ID, + false, interface); + if (phydev) + phydev->node = subnode; } return phydev; diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c index 74105c0b7d..635c0570ef 100644 --- a/drivers/net/phy/xilinx_gmii2rgmii.c +++ b/drivers/net/phy/xilinx_gmii2rgmii.c @@ -18,9 +18,38 @@ DECLARE_GLOBAL_DATA_PTR; static int xilinxgmiitorgmii_config(struct phy_device *phydev) { - struct phy_device *ext_phydev = phydev->priv; + ofnode node = phy_get_ofnode(phydev); + struct phy_device *ext_phydev; + struct ofnode_phandle_args phandle; + int ext_phyaddr = -1; + int ret; debug("%s\n", __func__); + + if (!ofnode_valid(node)) + return -EINVAL; + + phydev->addr = ofnode_read_u32_default(node, "reg", -1); + ret = ofnode_parse_phandle_with_args(node, "phy-handle", + NULL, 0, 0, &phandle); + if (ret) + return ret; + + ext_phyaddr = ofnode_read_u32_default(phandle.node, "reg", -1); + ext_phydev = phy_find_by_mask(phydev->bus, + 1 << ext_phyaddr, + PHY_INTERFACE_MODE_RGMII); + if (!ext_phydev) { + printf("%s, No external phy device found\n", __func__); + return -EINVAL; + } + + ext_phydev->node = phandle.node; + phydev->priv = ext_phydev; + + debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr, + ext_phyaddr); + if (ext_phydev->drv->config) ext_phydev->drv->config(ext_phydev); @@ -83,11 +112,6 @@ static int xilinxgmiitorgmii_startup(struct phy_device *phydev) static int xilinxgmiitorgmii_probe(struct phy_device *phydev) { - int ofnode = phydev->addr; - u32 phy_of_handle; - int ext_phyaddr = -1; - struct phy_device *ext_phydev; - debug("%s\n", __func__); if (phydev->interface != PHY_INTERFACE_MODE_GMII) { @@ -95,31 +119,6 @@ static int xilinxgmiitorgmii_probe(struct phy_device *phydev) return -EINVAL; } - /* - * Read the phy address again as the one we read in ethernet driver - * was overwritten for the purpose of storing the ofnode - */ - phydev->addr = fdtdec_get_int(gd->fdt_blob, ofnode, "reg", -1); - phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, ofnode, - "phy-handle"); - if (phy_of_handle > 0) - ext_phyaddr = fdtdec_get_int(gd->fdt_blob, - phy_of_handle, - "reg", -1); - ext_phydev = phy_find_by_mask(phydev->bus, - 1 << ext_phyaddr, - PHY_INTERFACE_MODE_RGMII); - if (!ext_phydev) { - printf("%s, No external phy device found\n", __func__); - return -EINVAL; - } - - ext_phydev->node = offset_to_ofnode(phy_of_handle); - phydev->priv = ext_phydev; - - debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr, - ext_phyaddr); - phydev->flags |= PHY_FLAG_BROKEN_RESET; return 0; diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index ec48689372..c68e4b7fb5 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -707,11 +707,7 @@ static int init_phy(struct tsec_private *priv) tsec_configure_serdes(priv); #if defined(CONFIG_DM_ETH) && defined(CONFIG_DM_MDIO) - if (ofnode_valid(ofnode_find_subnode(dev_ofnode(priv->dev), - "fixed-link"))) - phydev = phy_connect(NULL, 0, priv->dev, priv->interface); - else - phydev = dm_eth_phy_connect(priv->dev); + phydev = dm_eth_phy_connect(priv->dev); #else phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev, priv->interface); @@ -830,14 +826,40 @@ int tsec_probe(struct udevice *dev) u32 tbiaddr = CONFIG_SYS_TBIPA_VALUE; struct tsec_data *data; const char *phy_mode; + ofnode parent, child; fdt_addr_t reg; - ofnode parent; int ret; data = (struct tsec_data *)dev_get_driver_data(dev); pdata->iobase = (phys_addr_t)dev_read_addr(dev); - priv->regs = dev_remap_addr(dev); + if (pdata->iobase == FDT_ADDR_T_NONE) { + ofnode_for_each_subnode(child, dev_ofnode(dev)) { + if (strncmp(ofnode_get_name(child), "queue-group", + strlen("queue-group"))) + continue; + + reg = ofnode_get_addr(child); + if (reg == FDT_ADDR_T_NONE) { + printf("No 'reg' property of \n"); + return -ENOENT; + } + pdata->iobase = reg; + + /* + * if there are multiple queue groups, + * only the first one is used. + */ + break; + } + + if (!ofnode_valid(child)) { + printf("No child node for ?\n"); + return -ENOENT; + } + } + + priv->regs = map_physmem(pdata->iobase, 0, MAP_NOCACHE); ret = dev_read_phandle_with_args(dev, "tbi-handle", NULL, 0, 0, &phandle_args); diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index aa76a8f2d2..f0ff2612a6 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -124,6 +124,13 @@ config WDT_BCM6345 The watchdog timer is stopped when initialized. It performs full SoC reset. +config WDT_BOOKE + bool "PowerPC Book-E watchdog driver" + depends on WDT && MPC85xx + help + Watchdog driver for PowerPC Book-E chips, such as the Freescale + MPC85xx SOCs and the IBM PowerPC 440. + config WDT_CDNS bool "Cadence watchdog timer support" depends on WDT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 6e70c7ae19..5c7ef593fe 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o obj-$(CONFIG_WDT_AST2600) += ast2600_wdt.o obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o +obj-$(CONFIG_WDT_BOOKE) += booke_wdt.o obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o obj-$(CONFIG_WDT_ORION) += orion_wdt.o obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c new file mode 100644 index 0000000000..50c091956e --- /dev/null +++ b/drivers/watchdog/booke_wdt.c @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Watchdog timer for PowerPC Book-E systems + */ + +#include +#include +#include +#include + +#define WDTP_MASK TCR_WP(0x3f) + +/* For the specified period, determine the number of seconds + * corresponding to the reset time. There will be a watchdog + * exception at approximately 3/5 of this time. + * + * The formula to calculate this is given by: + * 2.5 * (2^(63-period+1)) / timebase_freq + * + * In order to simplify things, we assume that period is + * at least 1. This will still result in a very long timeout. + */ +static unsigned long long period_to_sec(unsigned int period) +{ + unsigned long long tmp = 1ULL << (64 - period); + unsigned long tmp2 = get_tbclk(); + + /* tmp may be a very large number and we don't want to overflow, + * so divide the timebase freq instead of multiplying tmp + */ + tmp2 = tmp2 / 5 * 2; + + do_div(tmp, tmp2); + return tmp; +} + +/* + * This procedure will find the highest period which will give a timeout + * greater than the one required. e.g. for a bus speed of 66666666 and + * and a parameter of 2 secs, then this procedure will return a value of 38. + */ +static unsigned int sec_to_period(unsigned int secs) +{ + unsigned int period; + + for (period = 63; period > 0; period--) { + if (period_to_sec(period) >= secs) + return period; + } + return 0; +} + +static int booke_wdt_reset(struct udevice *dev) +{ + mtspr(SPRN_TSR, TSR_ENW | TSR_WIS); + + return 0; +} + +static int booke_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) +{ + u32 val; + unsigned int timeout = DIV_ROUND_UP(timeout_ms, 1000); + + /* clear status before enabling watchdog */ + booke_wdt_reset(dev); + val = mfspr(SPRN_TCR); + val &= ~WDTP_MASK; + val |= (TCR_WIE | TCR_WRC(WRC_CHIP) | TCR_WP(sec_to_period(timeout))); + + mtspr(SPRN_TCR, val); + + return 0; +} + +static int booke_wdt_stop(struct udevice *dev) +{ + u32 val; + + val = mfspr(SPRN_TCR); + val &= ~(TCR_WIE | WDTP_MASK); + mtspr(SPRN_TCR, val); + + /* clear status to make sure nothing is pending */ + booke_wdt_reset(dev); + + return 0; +} + +static const struct wdt_ops booke_wdt_ops = { + .start = booke_wdt_start, + .stop = booke_wdt_stop, + .reset = booke_wdt_reset, +}; + +static const struct udevice_id booke_wdt_ids[] = { + { .compatible = "fsl,booke-wdt" }, + {} +}; + +U_BOOT_DRIVER(booke_wdt) = { + .name = "booke_wdt", + .id = UCLASS_WDT, + .of_match = booke_wdt_ids, + .ops = &booke_wdt_ops, +}; diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h new file mode 100644 index 0000000000..3d7519c935 --- /dev/null +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -0,0 +1,292 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Hitachi Power Grids. All rights reserved. + */ + +#ifndef __CONFIG_PG_WCOM_LS102XA_H +#define __CONFIG_PG_WCOM_LS102XA_H + +#define CONFIG_SYS_FSL_CLK + +#define CONFIG_SKIP_LOWLEVEL_INIT + +/* include common defines/options for all Keymile boards */ +#include "keymile-common.h" + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) + +#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE + +#define CONFIG_SYS_CLK_FREQ 66666666 +/* + * Take into account default implementation where DDR_FDBK_MULTI is consider as + * configured for DDR_PLL = 2*MEM_PLL_RAT. + * In our case DDR_FDBK_MULTI is 2, means DDR_PLL = MEM_PLL_RAT. + */ +#define CONFIG_DDR_CLK_FREQ (100000000 >> 1) + +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +#define CONFIG_DDR_SPD + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x54 + +/* + * IFC Definitions + */ +/* NOR Flash Definitions */ +#define CONFIG_FSL_IFC +#define CONFIG_SYS_FLASH_BASE 0x60000000 +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_NOR0_CSPR_EXT (0x0) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_TE | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024) + +#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | \ + CSOR_NOR_ADM_SHIFT(0x4) | \ + CSOR_NOR_NOR_MODE_ASYNC_NOR | \ + CSOR_NOR_TRHZ_20 | \ + CSOR_NOR_BCTLD) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x7) | \ + FTIM0_NOR_TAVDS(0x0) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x21) | \ + FTIM1_NOR_TSEQRAD_NOR(0x21)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) | \ + FTIM2_NOR_TCH(0x1) | \ + FTIM2_NOR_TWPH(0x6) | \ + FTIM2_NOR_TWP(0xb)) +#define CONFIG_SYS_NOR_FTIM3 0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } + +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_WRITE_SWAPPED_DATA + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + +/* NAND Flash Definitions */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0x68000000 +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE + +#define CONFIG_SYS_NAND_CSPR_EXT (0x0) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_TE | \ + CSPR_MSEL_NAND | \ + CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN \ + | CSOR_NAND_ECC_DEC_EN \ + | CSOR_NAND_ECC_MODE_4 \ + | CSOR_NAND_RAL_3 \ + | CSOR_NAND_PGS_2K \ + | CSOR_NAND_SPRZ_64 \ + | CSOR_NAND_PB(64) \ + | CSOR_NAND_TRHZ_40 \ + | CSOR_NAND_BCTLD) + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \ + FTIM0_NAND_TWP(0x8) | \ + FTIM0_NAND_TWCHT(0x3) | \ + FTIM0_NAND_TWH(0x5)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \ + FTIM1_NAND_TWBE(0x1e) | \ + FTIM1_NAND_TRR(0x6) | \ + FTIM1_NAND_TRP(0x8)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \ + FTIM2_NAND_TREH(0x5) | \ + FTIM2_NAND_TWHRE(0x3c)) +#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e)) + +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* QRIO FPGA Definitions */ +#define CONFIG_SYS_QRIO_BASE 0x70000000 +#define CONFIG_SYS_QRIO_BASE_PHYS CONFIG_SYS_QRIO_BASE + +#define CONFIG_SYS_CSPR2_EXT (0x00) +#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_TE | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_AMASK2 IFC_AMASK(64 * 1024) +#define CONFIG_SYS_CSOR2 (CSOR_GPCM_ADM_SHIFT(0x4) | \ + CSOR_GPCM_TRHZ_20 | \ + CSOR_GPCM_BCTLD) +#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \ + FTIM0_GPCM_TEADC(0x8) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0x6)) +#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x1) | \ + FTIM2_GPCM_TCH(0x1) | \ + FTIM2_GPCM_TWP(0x7)) +#define CONFIG_SYS_CS2_FTIM3 0x04000000 + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + +/* + * I2C + */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CONFIG_SYS_NUM_I2C_BUSES 3 +#define I2C_MUX_PCA_ADDR 0x70 +#define I2C_MUX_CH_DEFAULT 0x0 +#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ + {1, {I2C_NULL_HOP} }, \ + } + +/* + * eTSEC + */ +#ifdef CONFIG_TSEC_ENET +#define CONFIG_ETHPRIME "ethernet@2d90000" +#endif + +#define CONFIG_LAYERSCAPE_NS_ACCESS +#define CONFIG_SMP_PEN_ADDR 0x01ee0200 +#define COUNTER_FREQUENCY 12500000 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 256 +#define CONFIG_FSL_DEVICE_DISABLE + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_LS102XA_STREAM_ID + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_LEN 0x100000 /* 1Mbyte */ +#define CONFIG_SYS_QE_FW_ADDR 0x60020000 + +#define CONFIG_SYS_BOOTCOUNT_BE + +/* + * Environment + */ + +#define CONFIG_ENV_TOTAL_SIZE 0x40000 +#define ENV_DEL_ADDR CONFIG_ENV_ADDR_REDUND /* direct for newenv */ + +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV +#endif + +#ifndef CONFIG_KM_DEF_BOOT_ARGS_CPU +#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" +#endif + +#define CONFIG_KM_DEF_ENV_CPU \ + "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ + "cramfsloadfdt=" \ + "cramfsload ${fdt_addr_r} " \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ + "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0" \ + "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize} && " \ + "erase " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize} && " \ + "cp.b ${load_addr_r} " \ + __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \ + "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize}\0" \ + "update-nor=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \ + " +${filesize} && " \ + "erase " __stringify(CONFIG_SYS_FLASH_BASE) \ + " +${filesize} && " \ + "cp.b ${load_addr_r} " \ + __stringify(CONFIG_SYS_FLASH_BASE) " ${filesize} && " \ + "protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \ + " +" __stringify(CONFIG_SYS_MONITOR_LEN)"\0" \ + "set_fdthigh=true\0" \ + "checkfdt=true\0" \ + "" + +#define CONFIG_KM_NEW_ENV \ + "newenv=protect off " __stringify(ENV_DEL_ADDR) \ + " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ + "erase " __stringify(ENV_DEL_ADDR) \ + " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && " \ + "protect on " __stringify(ENV_DEL_ADDR) \ + " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_NEW_ENV \ + CONFIG_KM_DEF_ENV \ + "EEprom_ivm=pca9547:70:9\0" \ + "" + +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */ + +#endif diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 5d818a708d..5f11205802 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -49,8 +49,6 @@ #define CONFIG_MALLOC_F_ADDR CONFIG_SYS_FSL_OCRAM_BASE /* serial port */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h index bbc3ffd7f0..9962b9872a 100644 --- a/include/configs/ls1012a2g5rdb.h +++ b/include/configs/ls1012a2g5rdb.h @@ -61,13 +61,6 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h index 8de20e3ff4..02dd59892b 100644 --- a/include/configs/ls1012afrdm.h +++ b/include/configs/ls1012afrdm.h @@ -47,13 +47,6 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ "installer=load usb 0:2 $load_addr " \ "/flex_installer_arm64.itb; " \ "bootm $load_addr#$board\0" \ diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h index 29c344c63a..ba152834d5 100644 --- a/include/configs/ls1012afrwy.h +++ b/include/configs/ls1012afrwy.h @@ -80,13 +80,6 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index c4c9b7f501..36be8f42c9 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -131,13 +131,6 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h index 94e742ee84..582945b2ab 100644 --- a/include/configs/ls1012ardb.h +++ b/include/configs/ls1012ardb.h @@ -79,13 +79,6 @@ "run scan_dev_for_boot; " \ "fi; " \ "done\0" \ - "scan_dev_for_boot=" \ - "echo Scanning ${devtype} " \ - "${devnum}:${distro_bootpart}...; " \ - "for prefix in ${boot_prefixes}; do " \ - "run scan_dev_for_scripts; " \ - "done;" \ - "\0" \ "boot_a_script=" \ "load ${devtype} ${devnum}:${distro_bootpart} " \ "${scriptaddr} ${prefix}${script}; " \ diff --git a/include/configs/pg-wcom-seli8.h b/include/configs/pg-wcom-seli8.h new file mode 100644 index 0000000000..9a7669c940 --- /dev/null +++ b/include/configs/pg-wcom-seli8.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Hitachi Power Grids. All rights reserved. + */ + +#ifndef __CONFIG_PG_WCOM_SELI8_H +#define __CONFIG_PG_WCOM_SELI8_H + +#define CONFIG_HOSTNAME "SELI8" + +#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0" +#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1" + +/* PAXK FPGA Definitions */ +#define CONFIG_SYS_CSPR3_EXT (0x00) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_PAX_BASE) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(64 * 1024) +#define CONFIG_SYS_CSOR3 (CSOR_GPCM_ADM_SHIFT(0x4) | \ + CSOR_GPCM_TRHZ_40) +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x6) | \ + FTIM0_GPCM_TEADC(0x7) | \ + FTIM0_GPCM_TEAHC(0x2)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x2) | \ + FTIM1_GPCM_TRAD(0x12)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x3) | \ + FTIM2_GPCM_TCH(0x1) | \ + FTIM2_GPCM_TWP(0x12)) +#define CONFIG_SYS_CS3_FTIM3 0x04000000 + +/* PRST */ +#define KM_LIU_RST 0 +#define KM_PAXK_RST 1 +#define KM_DBG_ETH_RST 15 + +/* QRIO GPIOs used for deblocking */ +#define KM_I2C_DEBLOCK_PORT QRIO_GPIO_A +#define KM_I2C_DEBLOCK_SCL 20 +#define KM_I2C_DEBLOCK_SDA 21 + +#include "km/pg-wcom-ls102xa.h" + +#endif /* __CONFIG_PG_WCOM_SELI8_H */ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index bbb7d12ad1..6e79d3f56e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -93,7 +93,9 @@ #endif #define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ + "eth2addr=00:00:11:22:33:48\0" \ "eth3addr=00:00:11:22:33:45\0" \ + "eth4addr=00:00:11:22:33:48\0" \ "eth5addr=00:00:11:22:33:46\0" \ "eth6addr=00:00:11:22:33:47\0" \ "ipaddr=1.2.3.4\0" diff --git a/include/dm/of_extra.h b/include/dm/of_extra.h index fc4f974319..f0d205491c 100644 --- a/include/dm/of_extra.h +++ b/include/dm/of_extra.h @@ -94,4 +94,24 @@ int ofnode_decode_memory_region(ofnode config_node, const char *mem_type, const char *suffix, fdt_addr_t *basep, fdt_size_t *sizep); +/** + * ofnode_phy_is_fixed_link() - Detect fixed-link pseudo-PHY device + * + * This function detects whether the ethernet controller connects to a + * fixed-link pseudo-PHY device. + * + * This function supports the following two DT bindings: + * - the new DT binding, where 'fixed-link' is a sub-node of the + * Ethernet device + * - the old DT binding, where 'fixed-link' is a property with 5 + * cells encoding various information about the fixed PHY + * + * If both new and old bindings exist, the new one is preferred. + * + * @param eth_node ofnode containing the fixed-link subnode/property + * @param phy_node if fixed-link PHY detected, containing the PHY ofnode + * @return true if a fixed-link pseudo-PHY device exists, false otherwise + */ +bool ofnode_phy_is_fixed_link(ofnode eth_node, ofnode *phy_node); + #endif diff --git a/include/dm/simple_bus.h b/include/dm/simple_bus.h index 4ad4cc4051..b7104013c0 100644 --- a/include/dm/simple_bus.h +++ b/include/dm/simple_bus.h @@ -7,9 +7,9 @@ #define __DM_SIMPLE_BUS_H struct simple_bus_plat { - u32 base; - u32 size; - u32 target; + fdt_addr_t base; + fdt_size_t size; + fdt_addr_t target; }; #endif diff --git a/net/mdio-uclass.c b/net/mdio-uclass.c index 5da984ca3f..1b687765b8 100644 --- a/net/mdio-uclass.c +++ b/net/mdio-uclass.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -137,11 +138,13 @@ static struct phy_device *dm_eth_connect_phy_handle(struct udevice *ethdev, struct udevice *mdiodev; struct phy_device *phy; struct ofnode_phandle_args phandle = {.node = ofnode_null()}; + ofnode phynode; int i; if (CONFIG_IS_ENABLED(PHY_FIXED) && - ofnode_valid(dev_read_subnode(ethdev, "fixed-link"))) { - phy = phy_connect(NULL, -1, ethdev, interface); + ofnode_phy_is_fixed_link(dev_ofnode(ethdev), &phynode)) { + phy = phy_connect(NULL, 0, ethdev, interface); + phandle.node = phynode; goto out; } diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 425a7ecb89..b24fa36da0 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1339,7 +1339,6 @@ CONFIG_RESERVED_01_BASE CONFIG_RESERVED_02_BASE CONFIG_RESERVED_03_BASE CONFIG_RESERVED_04_BASE -CONFIG_RESET CONFIG_RESET_PHY_R CONFIG_RESET_TO_RETRY CONFIG_RESET_VECTOR_ADDRESS diff --git a/test/dm/Makefile b/test/dm/Makefile index d54abb7341..100e7701d2 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_CLK) += clk.o clk_ccf.o obj-$(CONFIG_CROS_EC) += cros_ec.o obj-$(CONFIG_DEVRES) += devres.o obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o +obj-$(CONFIG_DM_DSA) += dsa.o obj-$(CONFIG_DM_ETH) += eth.o obj-$(CONFIG_FIRMWARE) += firmware.o obj-$(CONFIG_DM_GPIO) += gpio.o @@ -89,6 +90,7 @@ obj-$(CONFIG_DM_MDIO) += mdio.o obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o obj-$(CONFIG_DM_RNG) += rng.o obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o +obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o diff --git a/test/dm/dsa.c b/test/dm/dsa.c new file mode 100644 index 0000000000..18c1776460 --- /dev/null +++ b/test/dm/dsa.c @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020-2021 NXP Semiconductors + */ + +#include +#include +#include +#include +#include +#include + +/* This test exercises the major dsa.h API functions, after making sure + * that the DSA ports and the master Eth are correctly probed. + */ +static int dm_test_dsa_probe(struct unit_test_state *uts) +{ + struct udevice *dev_dsa, *dev_port, *dev_master; + struct dsa_pdata *dsa_pdata; + enum uclass_id id; + + id = uclass_get_by_name("dsa"); + ut_assert(id == UCLASS_DSA); + + ut_assertok(uclass_find_device_by_name(UCLASS_DSA, "dsa-test", + &dev_dsa)); + ut_assertok(uclass_find_device_by_name(UCLASS_ETH, "dsa-test-eth", + &dev_master)); + ut_assertok(device_probe(dev_master)); + + ut_assertok(uclass_find_device_by_name(UCLASS_ETH, "dsa-test@0", + &dev_port)); + ut_assertok(device_probe(dev_port)); + + ut_assertok(uclass_find_device_by_name(UCLASS_ETH, "dsa-test@1", + &dev_port)); + ut_assertok(device_probe(dev_port)); + + /* exercise DSA API */ + dsa_pdata = dev_get_uclass_plat(dev_dsa); + ut_assertnonnull(dsa_pdata); + /* includes CPU port */ + ut_assert(dsa_pdata->num_ports == 3); + + ut_assertok(uclass_find_device_by_name(UCLASS_ETH, "lan0", + &dev_port)); + ut_assertok(device_probe(dev_port)); + + ut_assertok(uclass_find_device_by_name(UCLASS_ETH, "lan1", + &dev_port)); + ut_assertok(device_probe(dev_port)); + + dev_master = dsa_get_master(dev_dsa); + ut_assertnonnull(dev_master); + ut_asserteq_str("dsa-test-eth", dev_master->name); + + return 0; +} + +DM_TEST(dm_test_dsa_probe, UT_TESTF_SCAN_FDT); + +/* This test sends ping requests with the local address through each DSA port + * via the sandbox DSA master Eth. + */ +static int dm_test_dsa(struct unit_test_state *uts) +{ + net_ping_ip = string_to_ip("1.2.3.5"); + + env_set("ethact", "eth2"); + ut_assertok(net_loop(PING)); + + env_set("ethact", "lan0"); + ut_assertok(net_loop(PING)); + env_set("ethact", "lan1"); + ut_assertok(net_loop(PING)); + + env_set("ethact", ""); + + return 0; +} + +DM_TEST(dm_test_dsa, UT_TESTF_SCAN_FDT); diff --git a/test/dm/eth.c b/test/dm/eth.c index fa8a69da70..e4ee695610 100644 --- a/test/dm/eth.c +++ b/test/dm/eth.c @@ -53,8 +53,8 @@ static int dm_test_eth_alias(struct unit_test_state *uts) ut_assertok(net_loop(PING)); ut_asserteq_str("eth@10004000", env_get("ethact")); - /* Expected to fail since eth2 is not defined in the device tree */ - env_set("ethact", "eth2"); + /* Expected to fail since eth1 is not defined in the device tree */ + env_set("ethact", "eth1"); ut_assertok(net_loop(PING)); ut_asserteq_str("eth@10002000", env_get("ethact")); @@ -227,7 +227,7 @@ static int _dm_test_net_retry(struct unit_test_state *uts) * the active device should be eth0 */ sandbox_eth_disable_response(1, true); - env_set("ethact", "eth@10004000"); + env_set("ethact", "lan1"); env_set("netretry", "yes"); sandbox_eth_skip_timeout(); ut_assertok(net_loop(PING)); @@ -237,11 +237,11 @@ static int _dm_test_net_retry(struct unit_test_state *uts) * eth1 is disabled and netretry is no, so the ping should fail and the * active device should be eth1 */ - env_set("ethact", "eth@10004000"); + env_set("ethact", "lan1"); env_set("netretry", "no"); sandbox_eth_skip_timeout(); ut_asserteq(-ENONET, net_loop(PING)); - ut_asserteq_str("eth@10004000", env_get("ethact")); + ut_asserteq_str("lan1", env_get("ethact")); return 0; } diff --git a/test/dm/of_extra.c b/test/dm/of_extra.c index b19cd3787d..ac2d886892 100644 --- a/test/dm/of_extra.c +++ b/test/dm/of_extra.c @@ -36,3 +36,21 @@ static int dm_test_ofnode_read_fmap_entry(struct unit_test_state *uts) return 0; } DM_TEST(dm_test_ofnode_read_fmap_entry, 0); + +static int dm_test_ofnode_phy_is_fixed_link(struct unit_test_state *uts) +{ + ofnode eth_node, phy_node, node; + + eth_node = ofnode_path("/dsa-test/ports/port@0"); + ut_assert(ofnode_phy_is_fixed_link(eth_node, &phy_node)); + node = ofnode_path("/dsa-test/ports/port@0/fixed-link"); + ut_asserteq_mem(&phy_node, &node, sizeof(ofnode)); + + eth_node = ofnode_path("/dsa-test/ports/port@1"); + ut_assert(ofnode_phy_is_fixed_link(eth_node, &phy_node)); + node = eth_node; + ut_asserteq_mem(&phy_node, &node, sizeof(ofnode)); + + return 0; +} +DM_TEST(dm_test_ofnode_phy_is_fixed_link, 0); diff --git a/test/dm/simple-bus.c b/test/dm/simple-bus.c new file mode 100644 index 0000000000..3530b47fac --- /dev/null +++ b/test/dm/simple-bus.c @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2021, Bin Meng + */ + +#include +#include +#include +#include +#include +#include + +static int dm_test_simple_bus(struct unit_test_state *uts) +{ + struct udevice *dev; + struct simple_bus_plat *plat; + + /* locate the dummy device @ translation-test node */ + ut_assertok(uclass_find_device_by_seq(UCLASS_TEST_DUMMY, 0, &dev)); + ut_asserteq_str("dev@0,0", dev->name); + + /* locate the parent node which is a simple-bus */ + ut_assertnonnull(dev = dev_get_parent(dev)); + ut_asserteq_str("translation-test@8000", dev->name); + + ut_assertnonnull(plat = dev_get_uclass_plat(dev)); + ut_asserteq(0, plat->base); + ut_asserteq(0x8000, plat->target); + ut_asserteq(0x1000, plat->size); + + return 0; +} +DM_TEST(dm_test_simple_bus, UT_TESTF_SCAN_FDT | UT_TESTF_FLAT_TREE);